- 20 5月, 2011 30 次提交
-
-
由 Florian Mickler 提交于
If we need a bigger buffer, we reallocte a new buffer and free the old one. Note: This change is tested to compile only as I don't have the hardware. Signed-off-by: NFlorian Mickler <florian@mickler.org> Cc: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Florian Mickler 提交于
Note: This change is tested to compile only as I don't have the hardware. Signed-off-by: NFlorian Mickler <florian@mickler.org> Cc: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Florian Mickler 提交于
Otherwise it is not obvious that vp702x_usb_in_op or vp702x_usb_out_op will not interfere with any vp702x_usb_inout_op. Note: This change is tested to compile only, as I don't have the hardware. Signed-off-by: NFlorian Mickler <florian@mickler.org> Cc: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Florian Mickler 提交于
usb_control_msg initiates (and waits for completion of) a dma transfer using the supplied buffer. That buffer thus has to be seperately allocated on the heap. In lib/dma_debug.c the function check_for_stack even warns about it: WARNING: at lib/dma-debug.c:866 check_for_stack Note: This change is tested to compile only, as I don't have the hardware. Signed-off-by: NFlorian Mickler <florian@mickler.org> Cc: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Florian Mickler 提交于
struct vp702x_device_state.power_state is nowhere referenced. Signed-off-by: NFlorian Mickler <florian@mickler.org> Cc: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Florian Mickler 提交于
This sets up a buffer and a mutex protecting that buffer in the struct vp702x_device_state. The definition of struct vp702x_device_state is moved into the header in order to use the buffer also in the frontend. Signed-off-by: NFlorian Mickler <florian@mickler.org> Cc: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Florian Mickler 提交于
We need a state struct for the dvb_usb_device. In order to reduce confusion we rename the vp702x_state struct. Signed-off-by: NFlorian Mickler <florian@mickler.org> Cc: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Florian Mickler 提交于
Some whitespace, one linebreak and one unneded variable initialization... Signed-off-by: NFlorian Mickler <florian@mickler.org> Cc: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Florian Mickler 提交于
usb_control_msg initiates (and waits for completion of) a dma transfer using the supplied buffer. That buffer thus has to be seperately allocated on the heap. In lib/dma_debug.c the function check_for_stack even warns about it: WARNING: at lib/dma-debug.c:866 check_for_stack Note: This change is tested to compile only, as I don't have the hardware. Signed-off-by: NFlorian Mickler <florian@mickler.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Florian Mickler 提交于
usb_control_msg initiates (and waits for completion of) a dma transfer using the supplied buffer. That buffer thus has to be seperately allocated on the heap. In lib/dma_debug.c the function check_for_stack even warns about it: WARNING: at lib/dma-debug.c:866 check_for_stack Note: This change is tested to compile only, as I don't have the hardware. Signed-off-by: NFlorian Mickler <florian@mickler.org> Cc: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Florian Mickler 提交于
usb_control_msg initiates (and waits for completion of) a dma transfer using the supplied buffer. That buffer thus has to be seperately allocated on the heap. In lib/dma_debug.c the function check_for_stack even warns about it: WARNING: at lib/dma-debug.c:866 check_for_stack Note: This change is tested to compile only, as I don't have the hardware. Signed-off-by: NFlorian Mickler <florian@mickler.org> Cc: Igor M. Liplianin <liplianin@tut.by> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Florian Mickler 提交于
usb_control_msg initiates (and waits for completion of) a dma transfer using the supplied buffer. That buffer thus has to be seperately allocated on the heap. In lib/dma_debug.c the function check_for_stack even warns about it: WARNING: at lib/dma-debug.c:866 check_for_stack Note: This change is tested to compile only, as I don't have the hardware. Signed-off-by: NFlorian Mickler <florian@mickler.org> Cc: Akihiro Tsukada <tskd2@yahoo.co.jp> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Florian Mickler 提交于
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Florian Mickler 提交于
usb_control_msg initiates (and waits for completion of) a dma transfer using the supplied buffer. That buffer thus has to be seperately allocated on the heap. In lib/dma_debug.c the function check_for_stack even warns about it: WARNING: at lib/dma-debug.c:866 check_for_stack Note: This change is tested to compile only, as I don't have the hardware. Signed-off-by: NFlorian Mickler <florian@mickler.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Florian Mickler 提交于
This variable is never used. Signed-off-by: NFlorian Mickler <florian@mickler.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Olivier Grenie 提交于
This patch removes the on-stack buffers for USB DMA transfers. This is an alternative version of the patch discussed by Florian here: http://thread.gmane.org/gmane.linux.kernel/1115695/Signed-off-by: NOlivier Grenie <olivier.grenie@dibcom.fr> Signed-off-by: NPatrick Boettcher <patrick.boettcher@dibcom.fr> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Florian Mickler 提交于
This should not change anything except whitespace. Signed-off-by: NFlorian Mickler <florian@mickler.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Jarod Wilson 提交于
Use the newly introduced KEY_IMAGES where appropriate, and standardize on KEY_MEDIA for media center/application launcher button (such as the Windows logo key on the Windows Media Center Ed. remotes). Signed-off-by: NJarod Wilson <jarod@redhat.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Antti Palosaari 提交于
Add some comments about known GPIO settings of supported board versions. Signed-off-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Antti Palosaari 提交于
After that Anysee I2C adapter is capable of one and two byte long I2C addresses in case of read from I2C bus. Signed-off-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Antti Palosaari 提交于
Signed-off-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Antti Palosaari 提交于
Use correct I2C address for ZL10353 DVB-T demod. Signed-off-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Antti Palosaari 提交于
Looks like it is IF route switch on IOE[0]. Set it correctly to route signal from tuner to demod. Now it works for DVB-C too. Signed-off-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Antti Palosaari 提交于
It is ZL10353, TDA10023 and TDA18212. Tuner is inside of Samsung DNOD44CDH086A tuner module. Signed-off-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Antti Palosaari 提交于
New models have new NXP TDA18212 silicon tuner. Not tested yet due to lack of HW... Signed-off-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Antti Palosaari 提交于
Use board ID as base value when selecting correct hardware configuration. Signed-off-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Antti Palosaari 提交于
Print firmware version as two digit long (change from 3 to 2). Windows app have changed that too. First byte was hard coded as 0. Change email list address to report non-working device to current one. Signed-off-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Antti Palosaari 提交于
It can read more than one byte from I2C bus. Allow that. Signed-off-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Antti Palosaari 提交于
Switch from 8 bit notation to real 7 bit. Signed-off-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Malcolm Priestley 提交于
Fix issue where firmware does not release on cold reset. Also, default firmware never cold resets in multi tuner environment. Signed-off-by: NMalcolm Priestley <tvboxspy@gmail.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 29 4月, 2011 1 次提交
-
-
由 Malcolm Priestley 提交于
Forgot to add the DVB_STV0299/DVB_PLL to config Signed-off-by: NMalcolm Priestley <tvboxspy@gmail.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 05 4月, 2011 3 次提交
-
-
由 Patrick Boettcher 提交于
Device is based on STV0903 demod and STV6110x tuner Signed-off-by: NOleg Roitburd <oroitburd@gmail.com> Signed-off-by: NPatrick Boettcher <pboettcher@kernellabs.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Patrick Boettcher 提交于
Seems like 'adap->fe' test for NULL was meant to be before we dereference that pointer. Signed-off-by: NMariusz Kozlowski <mk@lab.zgora.pl> Signed-off-by: NPatrick Boettcher <pboettcher@kernellabs.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Patrick Boettcher 提交于
Fix typo introduced in b4d6046e. Spotted by Dr. David Alan Gilbert. Thanks for that. Signed-off-by: NPatrick Boettcher <pboettcher@kernellabs.com> Cc: Dr. David Alan Gilbert <linux@treblig.org> Cc: stable@kernel.org Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 31 3月, 2011 1 次提交
-
-
由 Lucas De Marchi 提交于
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: NLucas De Marchi <lucas.demarchi@profusion.mobi>
-
- 23 3月, 2011 5 次提交
-
-
由 Mauro Carvalho Chehab 提交于
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: NJarod Wilson <jarod@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
This driver uses an app-specific keymap for one of the tables. This is wrong. Instead, use the standard keycodes. Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: NJarod Wilson <jarod@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
This driver uses an app-specific keymap for one of the tables. This is wrong. Instead, use the standard keycodes. Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: NJarod Wilson <jarod@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
On a few places, KEY_MHP were used for snapshots. However, KEY_CAMERA is used for it on all the other keyboards that have a snapshot/Picture button. Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: NJarod Wilson <jarod@redhat.com>
-
由 Malcolm Priestley 提交于
Use 32 bit decoding to add support for more than one variant of remote control. Signed-off-by: NMalcolm Priestley <tvboxspy@gmail.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-