- 29 1月, 2011 9 次提交
-
-
由 Josef Bacik 提交于
When we do btrfs_block_rsv_release, if global_block_rsv is not full we will release all the extra bytes to global_block_rsv, even if it's only a little short of the amount of space that we need to reserve. This causes us to starve ourselves of reservable space during the transaction which will force us to shrink delalloc bytes and commit the transaction more often than we should. So instead just add the amount of bytes we need to add to the global reserve so reserved == size, and then add the rest back into the space_info for general use. Thanks, Signed-off-by: NJosef Bacik <josef@redhat.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Josef Bacik 提交于
When running xfstests 224 I kept getting ENOSPC when trying to remove the files, and this is because we were returning ret from check_path_shared while it was uninitalized, which isn't right. Fix this to return 0 properly, and now xfstests 224 doesn't freak out when it tries to clean itself up. Thanks, Signed-off-by: NJosef Bacik <josef@redhat.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Tsutomu Itoh 提交于
btrfs_start_ioctl_transaction() returns ERR_PTR(), not NULL. So, it is necessary to use IS_ERR() to check the return value. Signed-off-by: NTsutomu Itoh <t-itoh@jp.fujitsu.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Tsutomu Itoh 提交于
The error check of btrfs_join_transaction()/btrfs_join_transaction_nolock() is added, and the mistake of the error check in several places is corrected. For more stable Btrfs, I think that we should reduce BUG_ON(). But, I think that long time is necessary for this. So, I propose this patch as a short-term solution. With this patch: - To more stable Btrfs, the part that should be corrected is clarified. - The panic isn't done by the NULL pointer reference etc. (even if BUG_ON() is increased temporarily) - The error code is returned in the place where the error can be easily returned. As a long-term plan: - BUG_ON() is reduced by using the forced-readonly framework, etc. Signed-off-by: NTsutomu Itoh <t-itoh@jp.fujitsu.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Julia Lawall 提交于
After the conditional that precedes the following code, inode may be an ERR_PTR value. This can eg result from a memory allocation failure via the call to btrfs_iget, and thus does not imply that root is different than sub_root. Thus, an IS_ERR check is added to ensure that there is no dereference of inode in this case. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r@ identifier f; @@ f(...) { ... return ERR_PTR(...); } @@ identifier r.f, fld; expression x; statement S1,S2; @@ x = f(...) ... when != IS_ERR(x) ( if (IS_ERR(x) ||...) S1 else S2 | *x->fld ) // </smpl> Signed-off-by: NJulia Lawall <julia@diku.dk> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 liubo 提交于
There is a missing break in switch, fix it. Signed-off-by: NLiu Bo <liubo2009@cn.fujitsu.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 liubo 提交于
To make btrfs more stable, add several missing necessary memory allocation checks, and when no memory, return proper errno. We've checked that some of those -ENOMEM errors will be returned to userspace, and some will be catched by BUG_ON() in the upper callers, and none will be ignored silently. Signed-off-by: NLiu Bo <liubo2009@cn.fujitsu.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 liubo 提交于
btrfs_submit_compressed_read() is lack of memory allocation checks and corresponding error route. After this fix, if it comes to "no memory" case, errno will be returned to userland step by step, and tell users this operation cannot go on. Signed-off-by: NLiu Bo <liubo2009@cn.fujitsu.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
-
- 27 1月, 2011 12 次提交
-
-
由 Li Zefan 提交于
Suppose: - the source extent is: [0, 100] - the src offset is 10 - the clone length is 90 - the dest offset is 0 This statement: new_key.offset = key.offset + destoff - off will produce such an extent for the dest file: [ino, BTRFS_EXTENT_DATA_KEY, -10] , which is obviously wrong. Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
-
由 Miao Xie 提交于
fixup, which is allocated when starting page write to fix up the extent without ORDERED bit set, should be freed after this work is done. Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com> Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
-
由 Miao Xie 提交于
Steps to reproduce: # mkfs.btrfs /dev/sda2 # mount /dev/sda2 /mnt # touch /mnt/file0 # setfacl -m 'u:root:x,g::x,o::x' /mnt/file0 # umount /mnt # mount /dev/sda2 -o noacl /mnt # getfacl /mnt/file0 ... user::rw- user:root:--x group::--x mask::--x other::--x The output should be: user::rw- group::--x other::--x Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com> Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
-
由 Tero Roponen 提交于
We must save and free the original kstrdup()'ed pointer because strsep() modifies its first argument. Signed-off-by: NTero Roponen <tero.roponen@gmail.com> Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
-
由 Ian Kent 提交于
We missed a memory deallocation in commit 450ba0ea. If an existing super block is found at mount and there is no error condition then the pre-allocated tree_root and fs_info are no not used and are not freeded. Signed-off-by: NIan Kent <raven@themaw.net> Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
-
由 Li Zefan 提交于
fs_info, which is allocated in open_ctree(), should be freed in close_ctree(). Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
-
由 Li Zefan 提交于
After returing extents from a cluster to the block group, some extents in the block group may be mergeable. Reviewed-by: NJosef Bacik <josef@redhat.com> Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
-
由 Li Zefan 提交于
When adding a new extent, we'll firstly see if we can merge this extent to the left or/and right extent. Extract this as a helper try_merge_free_space(). As a side effect, we fix a small bug that if the new extent has non-bitmap left entry but is unmergeble, we'll directly link the extent without trying to drop it into bitmap. This also prepares for the next patch. Reviewed-by: NJosef Bacik <josef@redhat.com> Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
-
由 Li Zefan 提交于
When allocating extent entry from a cluster, we should update the free_space and free_extents fields of the block group. Reviewed-by: NJosef Bacik <josef@redhat.com> Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
-
由 Li Zefan 提交于
If there's no more free space in a bitmap, we should free it. Reviewed-by: NJosef Bacik <josef@redhat.com> Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
-
由 Li Zefan 提交于
Remove some duplicated code. This prepares for the next patch. Reviewed-by: NJosef Bacik <josef@redhat.com> Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
-
由 Li Zefan 提交于
If a block group is smaller than 1GB, the extent entry threadhold calculation will always set the threshold to 0. So as free space gets fragmented, btrfs will switch to use bitmap to manage free space, but then will never switch back to extents due to this bug. Reviewed-by: NJosef Bacik <josef@redhat.com> Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
-
- 18 1月, 2011 1 次提交
-
-
由 liubo 提交于
This patch comes from "Forced readonly mounts on errors" ideas. As we know, this is the first step in being more fault tolerant of disk corruptions instead of just using BUG() statements. The major content: - add a framework for generating errors that should result in filesystems going readonly. - keep FS state in disk super block. - make sure that all of resource will be freed and released at umount time. - make sure that fter FS is forced readonly on error, there will be no more disk change before FS is corrected. For this, we should stop write operation. After this patch is applied, the conversion from BUG() to such a framework can happen incrementally. Signed-off-by: NLiu Bo <liubo2009@cn.fujitsu.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
- 17 1月, 2011 16 次提交
-
-
由 Ben Hutchings 提交于
Filesystem rebalancing (BTRFS_IOC_BALANCE) affects the entire filesystem and may run uninterruptibly for a long time. This does not seem to be something that an unprivileged user should be able to do. Reported-by: NAron Xu <happyaron.xu@gmail.com> Signed-off-by: NBen Hutchings <ben@decadent.org.uk> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Josef Bacik 提交于
If we run low on space we could get a bunch of warnings out of btrfs_block_rsv_check, but this is mostly just called via the transaction code to see if we need to end the transaction, it expects to see failures, so let's not WARN and freak everybody out for no reason. Thanks, Signed-off-by: NJosef Bacik <josef@redhat.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Tsutomu Itoh 提交于
In btrfs_read_fs_root_no_radix(), 'root' is not freed if btrfs_search_slot() returns error. Signed-off-by: NTsutomu Itoh <t-itoh@jp.fujitsu.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Tsutomu Itoh 提交于
Should check if functions returns NULL or not. Signed-off-by: NTsutomu Itoh <t-itoh@jp.fujitsu.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Jesper Juhl 提交于
Hi, In fs/btrfs/inode.c::fixup_tree_root_location() we have this code: ... if (!path) { err = -ENOMEM; goto out; } ... out: btrfs_free_path(path); return err; btrfs_free_path() passes its argument on to other functions and some of them end up dereferencing the pointer. In the code above that pointer is clearly NULL, so btrfs_free_path() will eventually cause a NULL dereference. There are many ways to cut this cake (fix the bug). The one I chose was to make btrfs_free_path() deal gracefully with NULL pointers. If you disagree, feel free to come up with an alternative patch. Signed-off-by: NJesper Juhl <jj@chaosbits.net> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Dave Young 提交于
I happened to pass swap partition as root partition in cmdline, then kernel panic and tell me about "Cannot open root device". It is not correct, in fact it is a fs type mismatch instead of 'no device'. Eventually I found btrfs mounting failed with -EIO, it should be -EINVAL. The logic in init/do_mounts.c: for (p = fs_names; *p; p += strlen(p)+1) { int err = do_mount_root(name, p, flags, root_mount_data); switch (err) { case 0: goto out; case -EACCES: flags |= MS_RDONLY; goto retry; case -EINVAL: continue; } print "Cannot open root device" panic } SO fs type after btrfs will have no chance to mount Here fix the return value as -EINVAL Signed-off-by: NDave Young <hidave.darkstar@gmail.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Jesper Juhl 提交于
It seems to me that we leak the memory allocated to 'value' in btrfs_get_acl() if the call to posix_acl_from_xattr() fails. Here's a patch that attempts to correct that problem. Signed-off-by: NJesper Juhl <jj@chaosbits.net> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Miao Xie 提交于
When we store data by raid profile in btrfs with two or more different size disks, df command shows there is some free space in the filesystem, but the user can not write any data in fact, df command shows the wrong free space information of btrfs. # mkfs.btrfs -d raid1 /dev/sda9 /dev/sda10 # btrfs-show Label: none uuid: a95cd49e-6e33-45b8-8741-a36153ce4b64 Total devices 2 FS bytes used 28.00KB devid 1 size 5.01GB used 2.03GB path /dev/sda9 devid 2 size 10.00GB used 2.01GB path /dev/sda10 # btrfs device scan /dev/sda9 /dev/sda10 # mount /dev/sda9 /mnt # dd if=/dev/zero of=tmpfile0 bs=4K count=9999999999 (fill the filesystem) # sync # df -TH Filesystem Type Size Used Avail Use% Mounted on /dev/sda9 btrfs 17G 8.6G 5.4G 62% /mnt # btrfs-show Label: none uuid: a95cd49e-6e33-45b8-8741-a36153ce4b64 Total devices 2 FS bytes used 3.99GB devid 1 size 5.01GB used 5.01GB path /dev/sda9 devid 2 size 10.00GB used 4.99GB path /dev/sda10 It is because btrfs cannot allocate chunks when one of the pairing disks has no space, the free space on the other disks can not be used for ever, and should be subtracted from the total space, but btrfs doesn't subtract this space from the total. It is strange to the user. This patch fixes it by calcing the free space that can be used to allocate chunks. Implementation: 1. get all the devices free space, and align them by stripe length. 2. sort the devices by the free space. 3. check the free space of the devices, 3.1. if it is not zero, and then check the number of the devices that has more free space than this device, if the number of the devices is beyond the min stripe number, the free space can be used, and add into total free space. if the number of the devices is below the min stripe number, we can not use the free space, the check ends. 3.2. if the free space is zero, check the next devices, goto 3.1 This implementation is just likely fake chunk allocation. After appling this patch, df can show correct space information: # df -TH Filesystem Type Size Used Avail Use% Mounted on /dev/sda9 btrfs 17G 8.6G 0 100% /mnt Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Miao Xie 提交于
With this patch, we change the handling method when we can not get enough free extents with default size. Implementation: 1. Look up the suitable free extent on each device and keep the search result. If not find a suitable free extent, keep the max free extent 2. If we get enough suitable free extents with default size, chunk allocation succeeds. 3. If we can not get enough free extents, but the number of the extent with default size is >= min_stripes, we just change the mapping information (reduce the number of stripes in the extent map), and chunk allocation succeeds. 4. If the number of the extent with default size is < min_stripes, sort the devices by its max free extent's size descending 5. Use the size of the max free extent on the (num_stripes - 1)th device as the stripe size to allocate the device space By this way, the chunk allocator can allocate chunks as large as possible when the devices' space is not enough and make full use of the devices. Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Miao Xie 提交于
- make it return the start position and length of the max free space when it can not find a suitable free space. - make it more readability Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Miao Xie 提交于
There are two tiny problem: - One is When we check the chunk size is greater than the max chunk size or not, we should take mirrors into account, but the original code didn't. - The other is btrfs shouldn't use the size of the residual free space as the length of of a dup chunk when doing chunk allocation. It is because the device space that a dup chunk needs is twice as large as the chunk size, if we use the size of the residual free space as the length of a dup chunk, we can not get enough free space. Fix it. Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com> Reviewed-by: NJosef Bacik <josef@redhat.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Miao Xie 提交于
We cannot write data into files when when there is tiny space in the filesystem. Reproduce steps: # mkfs.btrfs /dev/sda1 # mount /dev/sda1 /mnt # dd if=/dev/zero of=/mnt/tmpfile0 bs=4K count=1 # dd if=/dev/zero of=/mnt/tmpfile1 bs=4K count=99999999999999 (fill the filesystem) # umount /mnt # mount /dev/sda1 /mnt # rm -f /mnt/tmpfile0 # dd if=/dev/zero of=/mnt/tmpfile0 bs=4K count=1 (failed with nospec) But if we do the last step again, we can write data successfully. The reason of the problem is that btrfs didn't try to commit the current transaction and reclaim some space when chunk allocation failed. This patch fixes it by committing the current transaction to reclaim some space when chunk allocation fails. Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com> Reviewed-by: NJosef Bacik <josef@redhat.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Miao Xie 提交于
Josef has implemented mixed data/metadata chunks, we must add those chunks' space just like data chunks. Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com> Reviewed-by: NJosef Bacik <josef@redhat.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Stefan Schmidt 提交于
CC [M] fs/btrfs/ctree.o In file included from fs/btrfs/ctree.c:21:0: fs/btrfs/ctree.h:1003:17: error: field <91>super_kobj<92> has incomplete type fs/btrfs/ctree.h:1074:17: error: field <91>root_kobj<92> has incomplete type make[2]: *** [fs/btrfs/ctree.o] Error 1 make[1]: *** [fs/btrfs] Error 2 make: *** [fs] Error 2 We need to include kobject.h here. Reported-by: NJeff Garzik <jeff@garzik.org> Fix-suggested-by: NLi Zefan <lizf@cn.fujitsu.com> Signed-off-by: NStefan Schmidt <stefan@datenfreihafen.org> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
-
-
- 05 1月, 2011 1 次提交
-
-
由 Chris Mason 提交于
When we read in block groups, we'll set non-redundant groups readonly if we find a raid1, DUP or raid10 group. But the ro code has an off by one bug in the math around testing to make sure out accounting doesn't go wrong. Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
- 23 12月, 2010 1 次提交
-
-
由 Li Zefan 提交于
This allows us to set a snapshot or a subvolume readonly or writable on the fly. Usage: Set BTRFS_SUBVOL_RDONLY of btrfs_ioctl_vol_arg_v2->flags, and then call ioctl(BTRFS_IOCTL_SUBVOL_SETFLAGS); Changelog for v3: - Change to pass __u64 as ioctl parameter. Changelog for v2: - Add _GETFLAGS ioctl. - Check if the passed fd is the root of a subvolume. - Change the name from _SNAP_SETFLAGS to _SUBVOL_SETFLAGS. Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
-