Rename mach-s3c2410/include/mach/gpio-core.h to mach/gpio-track.h so that
it can be included by <plat/gpio-core.h> when needed.

Eliminate all other empty gpio-core.h files and just include the
<plat/gpio-core.h> as necessary.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Move the GPIO and GPIO configuration headers into arch/arm/plat-samsung
as they are common to all the Samsung SoCs.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Move the gpio.c code containing the core gpiolib and GPIO support to
plat-samsung from plat-s3c as it is used by all current Samsung SoCs.

Note, we didn't move this to gpiolib.c as it contains code that is not
strictly for gpiolib support and the 4bit code is already called gpiolib.c
so make the change easier by not renaming both files in one go.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Move the pm-gpio code into plat-samsung.

Note, this should be changed later to properly compile the 4bit code if
the 4bit settings are enabled.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

This patch adds Samsung's S5P6440 GPIO support.
Signed-off-by: NAdityapratap Sharma <aditya.ps@samsung.com>
Signed-off-by: NAtul Dahiya <atul.dahiya@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

This patch moves GPIO common functions (from plat-s3c64xx) into plat-samsung.
and adds the config option to build the plat-samsung/gpiolib for Samsung SoCs.
Signed-off-by: NAdityapratap Sharma <aditya.ps@samsung.com>
Signed-off-by: NAtul Dahiya <atul.dahiya@samsung.com>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Merge branch 'next-samsung-serial1' into next-samsung-try7

Merge branch 'next-samsung-clock2' into next-samsung-try7

Merge branch 'next-samsung-devupdates1' into next-samsung-try7

Merge branch 'next-jassi-spi' into next-samsung-try7

This patch modifies s3c24xx_serial_initconsole function to accept multiple
platform UART information structures. This is required on platforms that have
differences among the instances of UART ports. As an example, the FIFO sizes
could be different for each UART instance and hence multiple platform UART
information structures would be needed.

This patch also modifies the s3c24xx_console_init macro since it wraps the
call to the s3c24xx_serial_initconsole function.
Signed-off-by: NThomas Abraham <thomas.ab@samsung.com>
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Merge branch 'next-samsung-clock2' into next-samsung-try5

Merge branch 'next-samsung-devupdates1' into next-samsung-try5

Merge branch 'next-jassi-spi' into next-samsung-try5

Merge branch 'next-s3c6410-andygreen' into next-samsung-try5

Merge branch 'next-samsung-mc-adc' into next-samsung-try5

Conflicts:
	arch/arm/mach-s3c6400/include/mach/map.h
	(fix ADC and RTC merge)

Add a s3c24xx_mci_set_platdata() call for all the machine files that have
platform data for the MCI driver. This brings the MCI device into line with
the other devices with __initdata and a specific call to ensure the right
structure type is being passed.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

There's no point in having these in until there is proper support for
them, so remove as they only confuse the device changing script.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Add a platform data helper for the OHCI device
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Move s3c24xx_uart_devs, s3c24xx_uart_src and the platform devices to a
common entry in plat-samsung since they are the same in all the current
implementations.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Platform devices for SPI Controller of S3C64XX are defined and exported for
machines to include. Also, controller setup helper functions are defined for
machine code to set runtime configuration of the controller and the bus.
Signed-off-by: NJassi Brar <jassi.brar@samsung.com>
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

We need a way to pass controller specific information to the SPI driver.
For that purpose new headers are made.

SPI Controller is assumed 'type-s3c64xx' and can be defined for newer SoCs.
 Hence, that part is placed under plat-samsung to be shared across newer SoCs.

SoC specific part - spi source clocks, will be placed
under plat-<soc>/include/plat/
Signed-off-by: NJassi Brar <jassi.brar@samsung.com>
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Defined special 48MHz clock sources for SPI-0,1.
Signed-off-by: NJassi Brar <jassi.brar@samsung.com>
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Added SPI controller register base.
Signed-off-by: NJassi Brar <jassi.brar@samsung.com>
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

The call has been assuming all clksrc-clks' divider size is 4 bits, but
this may not be the case anymore. Use the reg_div.size parameter to
calculate the maximum value it can take and check against that.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

The WARN_ON() was only checking the first clock in the array, instead of
being executed for each clksrc clock being registered.

Since this is an array of clocks, WARN_ON() does not provide a lot of
useful information about the problem, so change to using printk(KERN_ERR)
to report the problem to the console.

As a note, we still try and register the clock even if these problems are
present just in case and to avoid changing the behaviour of the registration
process.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Adds a additional check in s3c_set_clksrc function to ensure that the clksrc_clk
does have a choice of multiple clock sources. In addition to this, a check is
added to ensure that a parent is assigned to the clksrc_clk in case it does not
have a choice of parent clocks.
Signed-off-by: NThomas Abraham <thomas.ab@samsung.com>
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

The clk_hd0 and clk_pd0 where given a local dummy_enable call due to
not being registered with the clock code, which they really should have
been. Register these two clocks and remove the clk_dummy_enable as this
is done by the default clock registration code.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

LAN9115 Ethernet only works on SMDK6410 if certain switches
are set in specific ways.  Document the requirement.
Signed-off-by: NAndy Green <andy@warmcat.com>
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

This adds the physical address of the SROM unit, and
applies a virtual mapping for it to the S3C_VA_MEM
slot.
Signed-off-by: NAndy Green <andy@warmcat.com>
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Since the mach-smdk6410.c file claims it can start up the
smsc9115 ethernet device on the board, it should take care
about configuring the necessary chip select nCS1 so it can
see the chip.  The select defaults to 8-bit mode so without
config the Ethernet doesn't work.

This patch uses the new SROM definitions to set nCS1 to the
state found in the Samsung U-Boot port for 6410.  It may be
more conservative that it needs to be since those settings
were marked as for CS8900A also using this chip select.

But this change is enough to get the ethernet working when
booted with Qi.
Signed-off-by: NAndy Green <andy@warmcat.com>
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

This introduces a platform file for s3c64xx that defines
the SROM unit registers that control chip select
characteristics.
Signed-off-by: NAndy Green <andy@warmcat.com>
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Merge branch 'next-s3c64xx' into next-samsung

Conflicts:
	arch/arm/mach-s3c6400/include/mach/map.h
	( ADC and RTC PA merge fixed)

Add S3C64XX support to the generic Samsung ADC driver
Signed-off-by: NMaurus Cuelenaere <mcuelenaere@gmail.com>
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Move S3C24XX ADC driver to plat-samsung
Signed-off-by: NMaurus Cuelenaere <mcuelenaere@gmail.com>
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Define resources needed by the I2S drivers in platform code.
Audio cfg_gpio callback and IORESOURCE_DMA are added.
Signed-off-by: NJassi Brar <jassi.brar@samsung.com>
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Add S3C64XX RTC platform driver
Signed-off-by: NMaurus Cuelenaere <mcuelenaere@gmail.com>
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

The SMDK2413 has a commented out device that does not have any setup
data for it, so remove it for now.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Prepare for the forthcoming device changes by renaming s3c_device_usb to
s3c_device_ohci as this is what the device represents.
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

This patch adds UART serial port support for S5P6440 CPU. Most of the
serial support of Samsung's 6400 CPU is reused for 6440 CPU.
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>
Signed-off-by: NBen Dooks <ben-linux@fluff.org>