- 21 11月, 2008 3 次提交
-
-
由 Steven Rostedt 提交于
Impact: use cleaner probe_kernel API over assembly Using probe_kernel_read/write interface is a much cleaner approach than the current assembly version. Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
-
由 Steven Rostedt 提交于
Impact: update to PowerPC ftrace arch API This patch converts PowerPC to use the new dynamic ftrace arch API. Thanks to Paul Mackennas for pointing out the mistakes of my original test_24bit_addr function. Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
-
由 Steven Rostedt 提交于
Impact: fix for irq off latency tracer When idle is called, interrupts are disabled, but the idle function will still wake up on an interrupt. The problem is that the interrupt disabled latency tracer will take this call to idle as a latency. This patch disables the latency tracing when going into idle. Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
-
- 20 11月, 2008 2 次提交
-
-
由 David Miller 提交于
This adds the sparc syscall hookups. Signed-off-by: NDavid S. Miller <davem@davemloft.net> Cc: Ulrich Drepper <drepper@redhat.com> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Ulrich Drepper 提交于
Introduce a new accept4() system call. The addition of this system call matches analogous changes in 2.6.27 (dup3(), evenfd2(), signalfd4(), inotify_init1(), epoll_create1(), pipe2()) which added new system calls that differed from analogous traditional system calls in adding a flags argument that can be used to access additional functionality. The accept4() system call is exactly the same as accept(), except that it adds a flags bit-mask argument. Two flags are initially implemented. (Most of the new system calls in 2.6.27 also had both of these flags.) SOCK_CLOEXEC causes the close-on-exec (FD_CLOEXEC) flag to be enabled for the new file descriptor returned by accept4(). This is a useful security feature to avoid leaking information in a multithreaded program where one thread is doing an accept() at the same time as another thread is doing a fork() plus exec(). More details here: http://udrepper.livejournal.com/20407.html "Secure File Descriptor Handling", Ulrich Drepper). The other flag is SOCK_NONBLOCK, which causes the O_NONBLOCK flag to be enabled on the new open file description created by accept4(). (This flag is merely a convenience, saving the use of additional calls fcntl(F_GETFL) and fcntl (F_SETFL) to achieve the same result. Here's a test program. Works on x86-32. Should work on x86-64, but I (mtk) don't have a system to hand to test with. It tests accept4() with each of the four possible combinations of SOCK_CLOEXEC and SOCK_NONBLOCK set/clear in 'flags', and verifies that the appropriate flags are set on the file descriptor/open file description returned by accept4(). I tested Ulrich's patch in this thread by applying against 2.6.28-rc2, and it passes according to my test program. /* test_accept4.c Copyright (C) 2008, Linux Foundation, written by Michael Kerrisk <mtk.manpages@gmail.com> Licensed under the GNU GPLv2 or later. */ #define _GNU_SOURCE #include <unistd.h> #include <sys/syscall.h> #include <sys/socket.h> #include <netinet/in.h> #include <stdlib.h> #include <fcntl.h> #include <stdio.h> #include <string.h> #define PORT_NUM 33333 #define die(msg) do { perror(msg); exit(EXIT_FAILURE); } while (0) /**********************************************************************/ /* The following is what we need until glibc gets a wrapper for accept4() */ /* Flags for socket(), socketpair(), accept4() */ #ifndef SOCK_CLOEXEC #define SOCK_CLOEXEC O_CLOEXEC #endif #ifndef SOCK_NONBLOCK #define SOCK_NONBLOCK O_NONBLOCK #endif #ifdef __x86_64__ #define SYS_accept4 288 #elif __i386__ #define USE_SOCKETCALL 1 #define SYS_ACCEPT4 18 #else #error "Sorry -- don't know the syscall # on this architecture" #endif static int accept4(int fd, struct sockaddr *sockaddr, socklen_t *addrlen, int flags) { printf("Calling accept4(): flags = %x", flags); if (flags != 0) { printf(" ("); if (flags & SOCK_CLOEXEC) printf("SOCK_CLOEXEC"); if ((flags & SOCK_CLOEXEC) && (flags & SOCK_NONBLOCK)) printf(" "); if (flags & SOCK_NONBLOCK) printf("SOCK_NONBLOCK"); printf(")"); } printf("\n"); #if USE_SOCKETCALL long args[6]; args[0] = fd; args[1] = (long) sockaddr; args[2] = (long) addrlen; args[3] = flags; return syscall(SYS_socketcall, SYS_ACCEPT4, args); #else return syscall(SYS_accept4, fd, sockaddr, addrlen, flags); #endif } /**********************************************************************/ static int do_test(int lfd, struct sockaddr_in *conn_addr, int closeonexec_flag, int nonblock_flag) { int connfd, acceptfd; int fdf, flf, fdf_pass, flf_pass; struct sockaddr_in claddr; socklen_t addrlen; printf("=======================================\n"); connfd = socket(AF_INET, SOCK_STREAM, 0); if (connfd == -1) die("socket"); if (connect(connfd, (struct sockaddr *) conn_addr, sizeof(struct sockaddr_in)) == -1) die("connect"); addrlen = sizeof(struct sockaddr_in); acceptfd = accept4(lfd, (struct sockaddr *) &claddr, &addrlen, closeonexec_flag | nonblock_flag); if (acceptfd == -1) { perror("accept4()"); close(connfd); return 0; } fdf = fcntl(acceptfd, F_GETFD); if (fdf == -1) die("fcntl:F_GETFD"); fdf_pass = ((fdf & FD_CLOEXEC) != 0) == ((closeonexec_flag & SOCK_CLOEXEC) != 0); printf("Close-on-exec flag is %sset (%s); ", (fdf & FD_CLOEXEC) ? "" : "not ", fdf_pass ? "OK" : "failed"); flf = fcntl(acceptfd, F_GETFL); if (flf == -1) die("fcntl:F_GETFD"); flf_pass = ((flf & O_NONBLOCK) != 0) == ((nonblock_flag & SOCK_NONBLOCK) !=0); printf("nonblock flag is %sset (%s)\n", (flf & O_NONBLOCK) ? "" : "not ", flf_pass ? "OK" : "failed"); close(acceptfd); close(connfd); printf("Test result: %s\n", (fdf_pass && flf_pass) ? "PASS" : "FAIL"); return fdf_pass && flf_pass; } static int create_listening_socket(int port_num) { struct sockaddr_in svaddr; int lfd; int optval; memset(&svaddr, 0, sizeof(struct sockaddr_in)); svaddr.sin_family = AF_INET; svaddr.sin_addr.s_addr = htonl(INADDR_ANY); svaddr.sin_port = htons(port_num); lfd = socket(AF_INET, SOCK_STREAM, 0); if (lfd == -1) die("socket"); optval = 1; if (setsockopt(lfd, SOL_SOCKET, SO_REUSEADDR, &optval, sizeof(optval)) == -1) die("setsockopt"); if (bind(lfd, (struct sockaddr *) &svaddr, sizeof(struct sockaddr_in)) == -1) die("bind"); if (listen(lfd, 5) == -1) die("listen"); return lfd; } int main(int argc, char *argv[]) { struct sockaddr_in conn_addr; int lfd; int port_num; int passed; passed = 1; port_num = (argc > 1) ? atoi(argv[1]) : PORT_NUM; memset(&conn_addr, 0, sizeof(struct sockaddr_in)); conn_addr.sin_family = AF_INET; conn_addr.sin_addr.s_addr = htonl(INADDR_LOOPBACK); conn_addr.sin_port = htons(port_num); lfd = create_listening_socket(port_num); if (!do_test(lfd, &conn_addr, 0, 0)) passed = 0; if (!do_test(lfd, &conn_addr, SOCK_CLOEXEC, 0)) passed = 0; if (!do_test(lfd, &conn_addr, 0, SOCK_NONBLOCK)) passed = 0; if (!do_test(lfd, &conn_addr, SOCK_CLOEXEC, SOCK_NONBLOCK)) passed = 0; close(lfd); exit(passed ? EXIT_SUCCESS : EXIT_FAILURE); } [mtk.manpages@gmail.com: rewrote changelog, updated test program] Signed-off-by: NUlrich Drepper <drepper@redhat.com> Tested-by: NMichael Kerrisk <mtk.manpages@gmail.com> Acked-by: NMichael Kerrisk <mtk.manpages@gmail.com> Cc: <linux-api@vger.kernel.org> Cc: <linux-arch@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 18 11月, 2008 9 次提交
-
-
由 Philipp Kohlbecher 提交于
Impact: widen the reach of the low-memory-protect DMI quirk Phoenix BIOSes variously identify their vendor as "Phoenix Technologies, LTD" or "Phoenix Technologies LTD" (without the comma.) This patch makes the identification string in the bad_bios_dmi_table more general (following a suggestion by Ingo Molnar), so that both versions are handled. Again, the patched file compiles cleanly and the patch has been tested successfully on my machine. Signed-off-by: NPhilipp Kohlbecher <xt28@gmx.de> Cc: <stable@kernel.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Joerg Roedel 提交于
Impact: fix possible use of stale IO/TLB entries Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>
-
由 Joerg Roedel 提交于
Impact: fix comparison length for 'fullflush' Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>
-
由 Joerg Roedel 提交于
Impact: makes device isolation the default for AMD IOMMU Some device drivers showed double-free bugs of DMA memory while testing them with AMD IOMMU. If all devices share the same protection domain this can lead to data corruption and data loss. Prevent this by putting each device into its own protection domain per default. Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>
-
由 Joerg Roedel 提交于
Impact: add a new AMD IOMMU kernel command line parameter Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com>
-
由 Ingo Molnar 提交于
this compiler warning: arch/x86/kernel/ds.c: In function 'ds_request': arch/x86/kernel/ds.c:368: warning: 'context' may be used uninitialized in this function Shows that the code flow in ds_request() is buggy - it goes into the unlock+release-context path even when the context is not allocated yet. First allocate the context, then do the other checks. Also, take care with GFP allocations under the ds_lock spinlock. Cc: <stable@kernel.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Mike Frysinger 提交于
dma_mapping_error is an actual function, so fix broken define with a real inline stub Signed-off-by: NMike Frysinger <vapier.adi@gmail.com> Signed-off-by: NBryan Wu <cooloney@kernel.org>
-
由 Graf Yang 提交于
Signed-off-by: NGraf Yang <graf.yang@analog.com> Signed-off-by: NBryan Wu <cooloney@kernel.org>
-
由 Venki Pallipadi 提交于
Impact: fix incorrectly marked unstable TSC clock Patch (commit 0d12cdd5 "sched: improve sched_clock() performance") has a regression on one of the test systems here. With the patch, I see: checking TSC synchronization [CPU#0 -> CPU#1]: Measured 28 cycles TSC warp between CPUs, turning off TSC clock. Marking TSC unstable due to check_tsc_sync_source failed Whereas, without the patch syncs pass fine on all CPUs: checking TSC synchronization [CPU#0 -> CPU#1]: passed. Due to this, TSC is marked unstable, when it is not actually unstable. This is because syncs in check_tsc_wrap() goes away due to this commit. As per the discussion on this thread, correct way to fix this is to add explicit syncs as below? Signed-off-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 16 11月, 2008 4 次提交
-
-
由 Yinghai Lu 提交于
Impact: fix es7000 build CC arch/x86/kernel/es7000_32.o arch/x86/kernel/es7000_32.c: In function find_unisys_acpi_oem_table: arch/x86/kernel/es7000_32.c:255: error: implicit declaration of function acpi_get_table_with_size arch/x86/kernel/es7000_32.c:261: error: implicit declaration of function early_acpi_os_unmap_memory arch/x86/kernel/es7000_32.c: In function unmap_unisys_acpi_oem_table: arch/x86/kernel/es7000_32.c:277: error: implicit declaration of function __acpi_unmap_table make[1]: *** [arch/x86/kernel/es7000_32.o] Error 1 we applied one patch out of order... | commit a73aaedd | Author: Yinghai Lu <yhlu.kernel@gmail.com> | Date: Sun Sep 14 02:33:14 2008 -0700 | | x86: check dsdt before find oem table for es7000, v2 | | v2: use __acpi_unmap_table() that patch need: x86: use early_ioremap in __acpi_map_table x86: always explicitly map acpi memory acpi: remove final __acpi_map_table mapping before setting acpi_gbl_permanent_mmap acpi/x86: introduce __apci_map_table, v4 submitted to the ACPI tree but not upstream yet. fix it until those patches applied, need to revert this one Signed-off-by: NYinghai Lu <yinghai@kernel.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Markus Metzger 提交于
Fix a problem where ds_request() returned an error without releasing the ds lock. Reported-by: NStephane Eranian <eranian@gmail.com> Signed-off-by: NMarkus Metzger <markus.t.metzger@gmail.com> Cc: <stable@kernel.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 David Woodhouse 提交于
This reverts commit e51af663, which was wrongly hoovered up and submitted about a month after a better fix had already been merged. The better fix is commit cbda1ba8 ("PCI/iommu: blacklist DMAR on Intel G31/G33 chipsets"), where we do this blacklisting based on the DMI identification for the offending motherboard, since sometimes this chipset (or at least a chipset with the same PCI ID) apparently _does_ actually have an IOMMU. Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Geert Uytterhoeven 提交于
commit 69961c37 ("[PATCH] m68k/Atari: Interrupt updates") added a BUG_ON() with an incorrect upper bound comparison, which causes an early crash on VME boards, where IRQ_USER is 8, cnt is 192 and NR_IRQS is 200. Reported-by: NStephen N Chivers <schivers@csc.com.au> Tested-by: NKars de Jong <jongk@linux-m68k.org> Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org> Cc: stable@kernel.org Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 15 11月, 2008 6 次提交
-
-
由 Martin Schwidefsky 提交于
The uname system call for 64 bit compares current->personality without masking the upper 16 bits. If e.g. READ_IMPLIES_EXEC is set the result of a uname system call will always be s390x even if the process uses the s390 personality. Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Heiko Carstens 提交于
cpu_coregroup_map used to grab a mutex on s390 since it was only called from process context. Since c7c22e4d "block: add support for IO CPU affinity" this is not true anymore. It now also gets called from softirq context. To prevent possible deadlocks change this in architecture code and use a spinlock instead of a mutex. Cc: stable@kernel.org Cc: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Heiko Carstens 提交于
With CONFIG_IRQSOFF_TRACER the trace_hardirqs_off() function includes a call to __builtin_return_address(1). But we calltrace_hardirqs_off() from early entry code. There we have just a single stack frame. So this results in a kernel stack backchain walk that would walk beyond the kernel stack. Following the NULL terminated backchain this results in a lowcore read access. To fix this we simply call trace_hardirqs_off_caller() and pass the current instruction pointer. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Heiko Carstens 提交于
Disable tracing on idle psw. Otherwise it would give us huge preempt off times for idle. Which is rather pointless. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Heiko Carstens 提交于
arch/s390/kernel/built-in.o: In function `cleanup_io_leave_insn': mem_detect.c:(.text+0x10592): undefined reference to `lockdep_sys_exit' Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Gerald Schaefer 提交于
add_active_range() expects start_pfn + size as end_pfn value, i.e. not the pfn of the last page frame but the one behind that. We used the pfn of the last page frame so far, which can lead to a BUG_ON in move_freepages(), when the kernelcore parameter is specified (page_zone(start_page) != page_zone(end_page)). Signed-off-by: NGerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 14 11月, 2008 1 次提交
-
-
由 Helge Deller 提交于
Commit 2d3854a3 ("cpumask: introduce new API, without changing anything") introduced a build breakage on parisc. This trivial patch fixes it. Signed-off-by: NHelge Deller <deller@gmx.de> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Kyle Mc Martin <kyle@hera.kernel.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 13 11月, 2008 15 次提交
-
-
由 Russell King 提交于
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
FLASH_* and EPROM_* constants are unused, and clash with drivers: drivers/atm/ambassador.h:257:1: warning: "FLASH_BASE" redefined drivers/atm/ambassador.h:258:1: warning: "FLASH_SIZE" redefined drivers/atm/iphase.h:332:1: warning: "EPROM_SIZE" redefined so remove them. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
arch/arm/mm/dma-mapping.c: In function `dma_sync_sg_for_cpu': arch/arm/mm/dma-mapping.c:588: warning: statement with no effect Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Paul Mundt 提交于
Under qemu there is a race between the TDxE read-and-clear and the SCxTDR write. While on hardware it can be gauranteed that the read-and-clear will happen prior to the character being written out, no such assumption can be made under emulation. As this path happens with IRQs off and the hardware itself doesn't care about the ordering, move the SCxTDR write until after the read-and-clear. Signed-off-by: NVladimir Prus <vladimir@codesourcery.com> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Stuart MENEFY 提交于
The __copy_user function can corrupt the stack in the case of a non-trivial length of data, and either of the first two move instructions cause an exception. This is because the fixup for these two instructions is mapped to the no_pop case, but these instructions execute after the stack is pushed. This change creates an explicit NO_POP exception mapping macro, and uses it for the two instructions executed in the trivial case where no stack pushes occur. More information at ST Linux bugzilla: https://bugzilla.stlinux.com/show_bug.cgi?id=4824Signed-off-by: NDylan Reid <dylan_reid@bose.com> Signed-off-by: NStuart Menefy <stuart.menefy@st.com> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Francesco VIRLINZI 提交于
This patch fixes the TMU0 interrupt frequency on suspend/resume. During the resume the kernel reprograms the TMU0.ClockEvent mode but if the mode is periodic than the TMU0.TCOR is updated with a random wrong value without taking care latest valid saved value. There was no problem with No_HZ system where TMU0.TCOR isn't used. Signed-off-by: NFrancesco M. Virlinzi <francesco.virlinzi@st.com> Signed-off-by: NStuart Menefy <stuart.menefy@st.com> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Robert Reif 提交于
This patch fixes tty compile warnings as sugested by Alan Cox: CC drivers/char/n_tty.o drivers/char/n_tty.c: In function normal_poll: drivers/char/n_tty.c:1555: warning: array subscript is above array bounds drivers/char/n_tty.c:1564: warning: array subscript is above array bounds drivers/char/n_tty.c: In function read_chan: drivers/char/n_tty.c:1269: warning: array subscript is above array bounds CC drivers/char/tty_ioctl.o drivers/char/tty_ioctl.c: In function set_termios: drivers/char/tty_ioctl.c:533: warning: array subscript is above array bounds drivers/char/tty_ioctl.c:537: warning: array subscript is above array bounds drivers/char/tty_ioctl.c: In function tty_mode_ioctl: drivers/char/tty_ioctl.c:662: warning: array subscript is above array bounds drivers/char/tty_ioctl.c:892: warning: array subscript is above array bounds drivers/char/tty_ioctl.c:896: warning: array subscript is above array bounds drivers/char/tty_ioctl.c:577: warning: array subscript is above array bounds drivers/char/tty_ioctl.c:928: warning: array subscript is above array bounds drivers/char/tty_ioctl.c:934: warning: array subscript is above array bounds Signed-off-by: NRobert Reif <reif@earthlink.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Kay Sievers 提交于
Acked-by: NGreg Kroah-Hartman <gregkh@suse.de> Signed-off-by: NKay Sievers <kay.sievers@vrfy.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Paul Mundt 提交于
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Magnus Damm 提交于
Add PORT_SCIF to unbreak the early printk code. Signed-off-by: NMagnus Damm <damm@igel.co.jp> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Rafael J. Wysocki 提交于
My previous patch to make CONFIG_NUMA on x86_32 depend on BROKEN turned out to be unnecessary, after all, since the source of the hibernation vs CONFIG_NUMA problem turned out to be the fact that we didn't take the NUMA KVA remapping into account in the hibernation code. Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Rafael J. Wysocki 提交于
Impact: fix crash during hibernation on 32-bit NUMA The NUMA code on x86_32 creates special memory mapping that allows each node's pgdat to be located in this node's memory. For this purpose it allocates a memory area at the end of each node's memory and maps this area so that it is accessible with virtual addresses belonging to low memory. As a result, if there is high memory, these NUMA-allocated areas are physically located in high memory, although they are mapped to low memory addresses. Our hibernation code does not take that into account and for this reason hibernation fails on all x86_32 systems with CONFIG_NUMA=y and with high memory present. Fix this by adding a special mapping for the NUMA-allocated memory areas to the temporary page tables created during the last phase of resume. Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 David Howells 提交于
Don't do misalignment handling for userspace misalignment faults: just generate an appropriate SIGBUS instead. Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 David Howells 提交于
Don't handle the misaligned loading and storing of the SP register as in C code that's most certainly a compiler bug. Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-