- 05 8月, 2009 40 次提交
-
-
由 Igor Perminov 提交于
When an interface is configured in the AP mode, the mac80211 implementation doesn't inform the driver to receive PS Poll frames. It leads to inability to communicate with power-saving stations reliably. The FIF_CONTROL flag isn't passed by mac80211 to ieee80211_ops.configure_filter when an interface is in the AP mode. And it's ok, because we don't want to receive ACK frames and other control ones, but only PS Poll ones. This patch introduces the FIF_PSPOLL filter flag in addition to FIF_CONTROL, which means for the driver "pass PS Poll frames". This flag is passed to the driver: A) When an interface is configured in the AP mode. B) In all cases, when the FIF_CONTROL flag was passed earlier (in addition to it). Signed-off-by: NIgor Perminov <igor.perminov@inbox.ru> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luis R. Rodriguez 提交于
We forgot to cancel this work at the stop() callback. ------------[ cut here ]------------ WARNING: at net/mac80211/util.c:511 ieee80211_queue_delayed_work+0x3a/0x40 [mac80211]() Hardware name: 6460DWU queueing ieee80211 work while going to suspend Modules linked in: <-- snip --> Pid: 5124, comm: phy0 Tainted: G W 2.6.31-rc3-wl #4 Call Trace: [<ffffffffa03adcda>] ? ieee80211_queue_delayed_work+0x3a/0x40 [mac80211] [<ffffffff810552b8>] warn_slowpath_common+0x78/0xd0 [<ffffffff81055394>] warn_slowpath_fmt+0x64/0x70 [<ffffffff814ed2c9>] ? thread_return+0x3e/0x635 [<ffffffffa03adcda>] ieee80211_queue_delayed_work+0x3a/0x40 [mac80211] [<ffffffffa0297690>] ath_tx_complete_poll_work+0xc0/0x100 [ath9k] [<ffffffffa02975d0>] ? ath_tx_complete_poll_work+0x0/0x100 [ath9k] [<ffffffff81069b68>] worker_thread+0x178/0x260 [<ffffffff8106ecc0>] ? autoremove_wake_function+0x0/0x40 [<ffffffff810699f0>] ? worker_thread+0x0/0x260 [<ffffffff8106e89e>] kthread+0x9e/0xb0 [<ffffffff8101302a>] child_rip+0xa/0x20 [<ffffffff8106e800>] ? kthread+0x0/0xb0 [<ffffffff81013020>] ? child_rip+0x0/0x20 Signed-off-by: NLuis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luis R. Rodriguez 提交于
We will finalize this after some driver core changes, for now we leave this unsupported. Cc: Stephen Chen <stephen.chen@atheros.com> Cc: Zhifeng Cai <zhifeng.cai@atheros.com> Signed-off-by: NLuis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luis R. Rodriguez 提交于
Cc: Stephen Chen <stephen.chen@atheros.com> Cc: Zhifeng Cai <zhifeng.cai@atheros.com> Signed-off-by: NLuis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luis R. Rodriguez 提交于
These will be used later to add support for ar9271. Cc: Stephen Chen <stephen.chen@atheros.com> Cc: Zhifeng Cai <zhifeng.cai@atheros.com> Signed-off-by: NLuis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luis R. Rodriguez 提交于
We don't use typdefs on ath9k, remove that _t. Cc: Vivek Natarajan <vnatarajan@atheros.com> Signed-off-by: NLuis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luis R. Rodriguez 提交于
ath9k_hw_keyreset() has a spurious check for ah->curchan.. remove it. Signed-off-by: NLuis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luis R. Rodriguez 提交于
The keycache reset will not fail as right above we ensure to set the sc->keymax to be <= ah->caps.keycache_size. Just remove this dangling check. Signed-off-by: NLuis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luis R. Rodriguez 提交于
If hw initialization fails (ath9k_hw_init()) on ath_init_softc() we bail out and call ath9k_hw_detach(). The call ath9k_hw_detach() is conditional though as ath9k_hw_init() could itself have called ath9k_hw_detach(). Just describing this is itself a brain twister. Avoid this nonsense by removing ath9k_hw_detach() from ath9k_hw_init(). Upon hw initialization failure we expect the callers to take care of the cleanup. Signed-off-by: NLuis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luis R. Rodriguez 提交于
Signed-off-by: NLuis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luis R. Rodriguez 提交于
Signed-off-by: NLuis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luis R. Rodriguez 提交于
Signed-off-by: NLuis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luis R. Rodriguez 提交于
This makes it clear what this does. Signed-off-by: NLuis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luis R. Rodriguez 提交于
Signed-off-by: NLuis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luis R. Rodriguez 提交于
kfree(NULL) works so remove all those branches which check for it before kfree()'ing on ath9k_hw_rfdetach(). Signed-off-by: NLuis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luis R. Rodriguez 提交于
We re-label the device driver initialization routines from the ath_softc, the "Software Carrier" fillers. This should make it clearer what each of these do. Signed-off-by: NLuis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luis R. Rodriguez 提交于
During initialization ath9k tends to use "attach" to when we initialize hardware due to the fact we used to attach a "HAL". The notion of a HAL is long gone, so lets just be clear on what we are doing. Signed-off-by: NLuis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luis R. Rodriguez 提交于
This makes reading the hardware initialization process easier to understand. The new helpers added are: ath9k_hw_init_cal_settings() ath9k_hw_init_mode_regs() ath9k_hw_init_mode_gain_regs() ath9k_hw_init_11a_eeprom_fix() This patch has no functional changes. Signed-off-by: NLuis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luis R. Rodriguez 提交于
We're now propagating the -ENOMEM error so there is no need to keep a debug message there now. Signed-off-by: NLuis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luis R. Rodriguez 提交于
This reflects better what we are actually doing there. Signed-off-by: NLuis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luis R. Rodriguez 提交于
This reflects better what we are actually doing there. Signed-off-by: NLuis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luis R. Rodriguez 提交于
Signed-off-by: NLuis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luis R. Rodriguez 提交于
The softc is cached and set within the ath_hw struct. Signed-off-by: NLuis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luis R. Rodriguez 提交于
ath9k_hw_attach() was going first through some device id verifier, and then calling some other helper which was doing the real hardware initialization. Lets just do the devid checks within the real worker by calling a helper ath9k_hw_devid_supported(). Signed-off-by: NLuis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luis R. Rodriguez 提交于
We do this in case attach and friends try to get back to ah from the softc somehow. Signed-off-by: NLuis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luis R. Rodriguez 提交于
This lets us trim one argument off of hw initializer routines. Signed-off-by: NLuis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luis R. Rodriguez 提交于
This lets us simplify attach code and arguments passed. Signed-off-by: NLuis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luis R. Rodriguez 提交于
We were never propagating hw initialization errors, lets do that now and also use -EOPNOTSUPP when device revision is not supported yet. Signed-off-by: NLuis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luis R. Rodriguez 提交于
This makes adding new hw revisions a one line change here. Signed-off-by: NLuis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luis R. Rodriguez 提交于
We will clean this up next to just use a switch. Signed-off-by: NLuis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
The SME state machine in cfg80211 uses the SSID stored in struct wireless_dev internally, but fails to clear it in multiple places (when giving up on a connection attempt and when disconnecting). This doesn't matter to the SME state machine, but does matter for IBSS. Thus, in those cases, clear the SSID to avoid messing up the IBSS state machine. Reported-by: NJoerg Albert <jal2@gmx.de> Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Zhu Yi 提交于
UMAC only allows us to set default key for WEP and auth type is not 802.1X or RSNA. This patch fixes iwmc3200wifi for 802.1X with WEP104. Signed-off-by: NZhu Yi <yi.zhu@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Zhu Yi 提交于
We should only set the static_key flag for open and legacy authentication types. It should not be set for 802.1X and TKIP. Signed-off-by: NZhu Yi <yi.zhu@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Zhu Yi 提交于
iwm->umac_profile->sec.flags is set by iwm_set_wpa_version and checked by iwm_set_auth_type. The patch changes the order to make the flag used correctly. Signed-off-by: NZhu Yi <yi.zhu@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Gábor Stefanik 提交于
Implement baseband init for rev.0 and rev.1 LP PHYs. Convert boardflags_hi values to defines. Implement b43_phy_copy for easier copying between registers, as needed by LP-PHY init. Signed-off-by: Gábor Stefanik<netrolller.3d@gmail.com> Cc: Michael Buesch<mb@bu3sch.de> Cc: Larry Finger<larry.finger@lwfinger.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Pavel Roskin 提交于
Signed-off-by: NPavel Roskin <proski@gnu.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Pavel Roskin 提交于
Unloading rt61pci can leave the device in such state that reloading rt61pci would fail to reinitialize it. Bogus data would be read from the EEPROM and the RF version won't be recognized. It appears that unloading rt61pci with power saving enabled would have such effect. To initialize the device properly, SOFT_RESET_CSR should be set to the same value as rt61pci_config_ps() uses to wake up the device. Signed-off-by: NPavel Roskin <proski@gnu.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Larry Finger 提交于
As shown in http://thread.gmane.org/gmane.linux.kernel.wireless.general/36497, mac80211 has a bug that allows a call to the TX routine after the queues have been stopped. This situation will only occur under extreme stress. Although b43legacy does not crash when this condition occurs, it does generate a WARN_ON and also logs a queue overrun message. This patch recognizes b43legacy is not at fault and logs a message only when the most verbose debugging mode is enabled. In the unlikely event that the queue is not stopped when the DMA queue becomes full, then a warning is issued. This patch is based on the one used by b43. Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Tomas Winkler 提交于
Althoug GPS is a technology w/o transmitting radio and thus not a primary candidate for rfkill switch, rfkill gives unified interface point for devices with wireless technology. The input key is not supplied as it is too be deprecated. Cc: johannes@sipsolutions.net Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Acked-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Julia Lawall 提交于
The kernel.h macro DIV_ROUND_CLOSEST performs the computation (x + d/2)/d but is perhaps more readable. The semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @haskernel@ @@ #include <linux/kernel.h> @depends on haskernel@ expression x,__divisor; @@ - (((x) + ((__divisor) / 2)) / (__divisor)) + DIV_ROUND_CLOSEST(x,__divisor) // </smpl> Signed-off-by: NJulia Lawall <julia@diku.dk> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-