- 22 2月, 2011 5 次提交
-
-
由 Pawel Moll 提交于
Commit 18991197 added --build-id linker option when toolchain supports it. ARM one does, but for some reason places the section at 0 when linker script doesn't mention it explicitly. The 1e621a8e worked around the problem removing this section from binary image with explicit objcopy options, but it still exists in vmlinux, confusing tools like debuggers and perf. This problem was discussed here: http://lists.infradead.org/pipermail/linux-arm-kernel/2010-May/015994.html http://lists.infradead.org/pipermail/linux-arm-kernel/2010-May/015994.html but the proposed changes to the linker script were substantial. This patch simply places NOTES (36 bytes long, at least when compiled with CodeSourcery toolchain) between data and bss, which seem to be the right place (and suggested by the sample linker script in include/asm-generic/vmlinux.lds.h). It is enough to place it correctly in vmlinux (so debuggers are happy): Section Headers: [11] .data PROGBITS c07ce000 7ce000 020fc0 00 WA 0 0 32 [12] .notes NOTE c07eefc0 7eefc0 000024 00 AX 0 0 4 [13] .bss NOBITS c07ef000 7eefe4 01e628 00 WA 0 0 32 Program Headers: LOAD 0x008000 0xc0008000 0xc0008000 0x7e6fe4 0x805628 RWE 0x8000 NOTE 0x7eefc0 0xc07eefc0 0xc07eefc0 0x00024 0x00024 R E 0x4 Section to Segment mapping: Segment Sections... 00 <...> .data .notes .bss 01 .notes and to get it exposed as /sys/kernel/notes used by perf tools. Signed-off-by: NPawel Moll <pawel.moll@arm.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 viresh kumar 提交于
SPEAR320_SOC_CONFIG_BASE was wrong, causing the wrong registers to be accessed. Reviewed-by: NStanley Miao <stanley.miao@windriver.com> Signed-off-by: NViresh Kumar <viresh.kumar@st.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Shiraz Hashim 提交于
In sysctl_soft_reset(), switch to slow mode before resetting the system via the system controller. This is required. Reviewed-by: NStanley Miao <stanley.miao@windriver.com> Signed-off-by: NShiraz Hashim <shiraz.hashim@st.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 viresh kumar 提交于
readl() and writel() calls the outer cache maintainance operations which are not available during Linux uncompression. This patch replaces readl() and writel() with readl_relaxed() and writel_relaxed() to avoid the link time errors. Reviewed-by: NStanley Miao <stanley.miao@windriver.com> Signed-off-by: NViresh Kumar <viresh.kumar@st.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 viresh kumar 提交于
This patch fixes following warning: arch/arm/mm/init.c:606: warning: format '%08lx' expects type 'long unsigned int', but argument 12 has type 'unsigned int' by appending UL to VMALLOC_END's Number. Reviewed-by: NStanley Miao <stanley.miao@windriver.com> Signed-off-by: NViresh Kumar <viresh.kumar@st.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 19 2月, 2011 13 次提交
-
-
由 Catalin Marinas 提交于
If ID_MMFR0[3:0] >= 3, the architecture version is ARMv7. The code was currently only testing for ID_MMFR0[3:0] == 3. Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Nicolas Pitre 提交于
Signed-off-by: NNicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Will Deacon 提交于
On versions of the Cortex-A9 prior to r3p0, an interrupted ICIALLUIS operation may prevent the completion of a following broadcasted operation if the second operation is received by a CPU before the ICIALLUIS has completed, potentially leading to corrupted entries in the cache or TLB. This workaround sets a bit in the diagnostic register of the Cortex-A9, causing CP15 maintenance operations to be uninterruptible. Acked-by: NCatalin Marinas <catalin.marinas@arm.com> Signed-off-by: NWill Deacon <will.deacon@arm.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Will Deacon 提交于
Now that we can execute a CONFIG_SMP kernel on a uniprocessor system, extra care has to be taken in the PMU IRQ affinity setting code to ensure that we don't always fail to initialise. This patch changes the CPU PMU initialisation code so that when we only have a single IRQ, whose affinity can not be changed at the controller, we report success (0) rather than -EINVAL. Reported-by: NAvik Sil <avik.sil@linaro.org> Acked-by: NJamie Iles <jamie@jamieiles.com> Signed-off-by: NWill Deacon <will.deacon@arm.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Srinidhi Kasagar 提交于
The effect of cache sync operation is to drain the store buffer and wait for all internal buffers to be empty. In normal conditions, store buffer is able to merge the normal memory writes within its 32-byte data buffers. Due to this erratum present in r3p0, the effect of cache sync operation on the store buffer still remains when the operation completes. This means that the store buffer is always asked to drain and this prevents it from merging any further writes. This can severely affect performance on the write traffic esp. on Normal memory NC one. The proposed workaround is to replace the normal offset of cache sync operation(0x730) by another offset targeting an unmapped PL310 register 0x740. Signed-off-by: Nsrinidhi kasagar <srinidhi.kasagar@stericsson.com> Acked-by: NLinus Walleij <linus.walleij@stericsson.com> Acked-by: NCatalin Marinas <catalin.marinas@arm.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip由 Linus Torvalds 提交于
* 'rtc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: RTC: Re-enable UIE timer/polling emulation RTC: Revert UIE emulation removal RTC: Release mutex in error path of rtc_alarm_irq_enable
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (37 commits) net: deinit automatic LIST_HEAD net: dont leave active on stack LIST_HEAD net: provide default_advmss() methods to blackhole dst_ops tg3: Restrict phy ioctl access drivers/net: Call netif_carrier_off at the end of the probe ixgbe: work around for DDP last buffer size ixgbe: fix panic due to uninitialised pointer e1000e: flush all writebacks before unload e1000e: check down flag in tasks isdn: hisax: Use l2headersize() instead of dup (and buggy) func. arp_notify: unconditionally send gratuitous ARP for NETDEV_NOTIFY_PEERS. cxgb4vf: Use defined Mailbox Timeout cxgb4vf: Quiesce Virtual Interfaces on shutdown ... cxgb4vf: Behave properly when CONFIG_DEBUG_FS isn't defined ... cxgb4vf: Check driver parameters in the right place ... pch_gbe: Fix the MAC Address load issue. iwlwifi: Delete iwl3945_good_plcp_health. net/can/softing: make CAN_SOFTING_CS depend on CAN_SOFTING netfilter: nf_iterate: fix incorrect RCU usage pch_gbe: Fix the issue that the receiving data is not normal. ...
-
git://xenbits.xen.org/people/ianc/linux-2.6由 Linus Torvalds 提交于
* 'for-linus/bugfixes' of git://xenbits.xen.org/people/ianc/linux-2.6: xen: suspend and resume system devices when running PVHVM
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq由 Linus Torvalds 提交于
* 'fixes-2.6.38' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: workqueue: make sure MAYDAY_INITIAL_TIMEOUT is at least 2 jiffies long workqueue, freezer: unify spelling of 'freeze' + 'able' to 'freezable' workqueue: wake up a worker when a rescuer is leaving a gcwq
-
由 Eric Dumazet 提交于
commit 9b5e383c (net: Introduce unregister_netdevice_many()) left an active LIST_HEAD() in rollback_registered(), with possible memory corruption. Even if device is freed without touching its unreg_list (and therefore touching the previous memory location holding LISTE_HEAD(single), better close the bug for good, since its really subtle. (Same fix for default_device_exit_batch() for completeness) Reported-by: NMichal Hocko <mhocko@suse.cz> Tested-by: NMichal Hocko <mhocko@suse.cz> Reported-by: NEric W. Biderman <ebiderman@xmission.com> Tested-by: NEric W. Biderman <ebiderman@xmission.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org> Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> CC: Ingo Molnar <mingo@elte.hu> CC: Octavian Purdila <opurdila@ixiacom.com> CC: stable <stable@kernel.org> [.33+] Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Linus Torvalds 提交于
Eric W. Biderman and Michal Hocko reported various memory corruptions that we suspected to be related to a LIST head located on stack, that was manipulated after thread left function frame (and eventually exited, so its stack was freed and reused). Eric Dumazet suggested the problem was probably coming from commit 44345724 (net: factorize sync-rcu call in unregister_netdevice_many) This patch fixes __dev_close() and dev_close() to properly deinit their respective LIST_HEAD(single) before exiting. References: https://lkml.org/lkml/2011/2/16/304 References: https://lkml.org/lkml/2011/2/14/223Reported-by: NMichal Hocko <mhocko@suse.cz> Tested-by: NMichal Hocko <mhocko@suse.cz> Reported-by: NEric W. Biderman <ebiderman@xmission.com> Tested-by: NEric W. Biderman <ebiderman@xmission.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org> Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> CC: Ingo Molnar <mingo@elte.hu> CC: Octavian Purdila <opurdila@ixiacom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Commit 0dbaee3b (net: Abstract default ADVMSS behind an accessor.) introduced a possible crash in tcp_connect_init(), when dst->default_advmss() is called from dst_metric_advmss() Reported-by: NGeorge Spelvin <linux@horizon.com> Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Linus Torvalds 提交于
When list debugging is enabled, we aim to readably show list corruption errors, and the basic list_add/list_del operations end up having extra debugging code in them to do some basic validation of the list entries. However, "list_del_init()" and "list_move[_tail]()" ended up avoiding the debug code due to how they were written. This fixes that. So the _next_ time we have list_move() problems with stale list entries, we'll hopefully have an easier time finding them.. Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 18 2月, 2011 12 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6由 Linus Torvalds 提交于
* 'pm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6: PM / Hibernate: Return error code when alloc_image_page() fails
-
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6由 Linus Torvalds 提交于
* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm/radeon/kms: add missing frac fb div flag for dce4+ drm/radeon/kms: do not reject X16 and Y16X16 floating-point formats on r300 drm/nouveau: fix suspend/resume on GPUs that don't have PM support drm/nouveau: flips/flipd need to always set 'evict' for move_accel_cleanup() drm/nv40: fix tiling-related setup for a number of chipsets drm/nouveau: fix non-EDIDful native mode selection drm/nouveau: Fix detection of DDC-based LVDS on DCB15 boards. drm/nv04-nv40: Fix NULL dereference when we fail to find an LVDS native mode. drm/nv10: Fix crash when allocating a BO larger than half the available VRAM.
-
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: IB/qib: Prevent double completions after a timeout or RNR error IB/qib: Fix double add_timer() RDMA/nes: Don't generate async events for unregistered devices
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6: sparc64: Fix NMI startup bug which also breaks perf. sparc: fix size argument to find_next_zero_bit() sparc: use bitmap_set() sparc32: unaligned memory access (MNA) trap handler bug
-
由 Timo Warns 提交于
Validate number of blocks in map and remove redundant variable. Signed-off-by: NTimo Warns <warns@pre-sense.de> Cc: stable@kernel.org Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 John Stultz 提交于
This patch re-enables UIE timer/polling emulation for rtc devices that do not support alarm irqs. CC: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> CC: Thomas Gleixner <tglx@linutronix.de> Reported-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de> Tested-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: NJohn Stultz <john.stultz@linaro.org>
-
由 John Stultz 提交于
Uwe pointed out that my alarm based UIE emulation is not sufficient to replace the older timer/polling based UIE emulation on devices where there is no alarm irq. This causes rtc devices without alarms to return -EINVAL to UIE ioctls. The fix is to re-instate the old timer/polling method for devices without alarm irqs. This patch reverts the following commits: 042620a0 - Remove UIE emulation 1daeddd5 - Cleanup removed UIE emulation declaration b5cc8ca1 - Remove Kconfig symbol for UIE emulation The emulation mode will still need to be wired-in with a following patch before it will work. CC: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> CC: Thomas Gleixner <tglx@linutronix.de> Reported-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: NJohn Stultz <john.stultz@linaro.org>
-
由 Uwe Kleine-König 提交于
On hardware that doesn't support alarm interrupts, rtc_alarm_irq_enable could return without releasing the ops_lock mutex. This was introduced in aa0be0f4 (RTC: Propagate error handling via rtc_timer_enqueue properly) This patch corrects the issue by only returning once the mutex is released. [john.stultz: Reworded the commit log] Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: NJohn Stultz <john.stultz@linaro.org>
-
由 Matt Carlson 提交于
If management firmware is present and the device is down, the firmware will assume control of the phy. If a phy access were allowed from the host, it will collide with firmware phy accesses, resulting in unpredictable behavior. This patch fixes the problem by disallowing phy accesses during the problematic condition. Signed-off-by: NMatt Carlson <mcarlson@broadcom.com> Reviewed-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ivan Vecera 提交于
Without calling of netif_carrier_off at the end of the probe the operstate is unknown when the device is initially opened. By default the carrier is on so when the device is opened and netif_carrier_on is called the link watch event is not fired and operstate remains zero (unknown). This patch fixes this behavior in forcedeth and r8169. Signed-off-by: NIvan Vecera <ivecera@redhat.com> Acked-by: NFrancois Romieu <romieu@fr.zoreil.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Roland Dreier 提交于
-
由 Mike Marciniszyn 提交于
There is a double completion associated with error handling for RC QPs. The sequence is: - The do_rc_ack() routine fields an RNR nack and there are 0 rnr_retries configured on the QP. - qib_error_qp() stops the pending timer - qib_rc_send_complete() is called from sdma_complete() - qib_rc_send_complete() starts the timer because the msb of the psn just completed says an ack is needed. - a bunch of flushes occur as ipoib posts WQEs to an error'ed QP - rc_timeout() calls qib_restart_rc() - qib_restart_rc() calls qib_send_complete() with a IB_WC_RETRY_EXC_ERR on a wqe that has already been completed in the past The fix avoids starting the timer since another packet will never arrive. Signed-off-by: NMike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: NRoland Dreier <roland@purestorage.com>
-
- 17 2月, 2011 10 次提交
-
-
由 Ian Campbell 提交于
Otherwise we fail to properly suspend/resume all of the emulated devices. Something between 2.6.38-rc2 and rc3 appears to have exposed this issue, but it's always been wrong not to do this. Signed-off-by: NIan Campbell <ian.campbell@citrix.com> Acked-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com> Acked-by: NJeremy Fitzhardinge <jeremy@goop.org>
-
由 Amir Hanania 提交于
A HW limitation was recently discovered where the last buffer in a DDP offload cannot be a full buffer size in length. Fix the issue with a work around by adding another buffer with size = 1. Signed-off-by: NAmir Hanania <amir.hanania@intel.com> Tested-by: NRoss Brattain <ross.b.brattain@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Andy Gospodarek 提交于
Systems containing an 82599EB and running a backported driver from upstream were panicing on boot. It turns out hw->mac.ops.setup_sfp is only set for 82599, so one should check to be sure that pointer is set before continuing in ixgbe_sfp_config_module_task. I verified by inspection that the upstream driver has the same issue and also added a check before the call in ixgbe_sfp_link_config. Signed-off-by: NAndy Gospodarek <andy@greyhouse.net> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Jesse Brandeburg 提交于
The driver was not flushing all writebacks before unloading, possibly causing memory to be written by the hardware after the driver had reinitialized the rings. This adds missing functionality to flush any pending writebacks and is called in all spots where descriptors should be completed before the driver begins processing. Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Reviewed-by: NBruce Allan <bruce.w.allan@intel.com> Tested-by: NJeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Jesse Brandeburg 提交于
This change is part of a fix to avoid any tasks running while the driver is exiting and deinitializing resources. Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: NJeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
git://linux-nfs.org/~bfields/linux由 Linus Torvalds 提交于
* 'for-2.6.38' of git://linux-nfs.org/~bfields/linux: nfsd: correctly handle return value from nfsd_map_name_to_*
-
由 Dave Airlie 提交于
* 'nouveau/drm-nouveau-next' of /ssd/git/drm-nouveau-next: drm/nouveau: fix suspend/resume on GPUs that don't have PM support drm/nouveau: flips/flipd need to always set 'evict' for move_accel_cleanup() drm/nv40: fix tiling-related setup for a number of chipsets drm/nouveau: fix non-EDIDful native mode selection drm/nouveau: Fix detection of DDC-based LVDS on DCB15 boards. drm/nv04-nv40: Fix NULL dereference when we fail to find an LVDS native mode. drm/nv10: Fix crash when allocating a BO larger than half the available VRAM.
-
由 Alex Deucher 提交于
The fixed ref/post dividers are set by the AdjustPll table rather than the ss info table on dce4+. Make sure we enable the fractional feedback dividers when using a fixed post or ref divider on them as well. Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=29272Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Cc: stable@kernel.org Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Marek Olšák 提交于
Signed-off-by: NMarek Olšák <maraeo@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Ben Skeggs 提交于
This has been broken since 2.6.37, and fixes resume on a couple of fermi boards I have access to. Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-