- 12 2月, 2016 2 次提交
-
-
由 Linus Torvalds 提交于
Merge tag 'platform-drivers-x86-v4.5-3' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86 Pull x86 platform driver fixes from Darren Hart: "Just two small fixes for the 4.5-rc cycle: intel_scu_ipcutil: - underflow in scu_reg_access() intel-hid: - fix incorrect entries in intel_hid_keymap" * tag 'platform-drivers-x86-v4.5-3' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86: intel_scu_ipcutil: underflow in scu_reg_access() intel-hid: fix incorrect entries in intel_hid_keymap
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
Pull networking fixes from David Miller: 1) Fix BPF handling of branch offset adjustmnets on backjumps, from Daniel Borkmann. 2) Make sure selinux knows about SOCK_DESTROY netlink messages, from Lorenzo Colitti. 3) Fix openvswitch tunnel mtu regression, from David Wragg. 4) Fix ICMP handling of TCP sockets in syn_recv state, from Eric Dumazet. 5) Fix SCTP user hmacid byte ordering bug, from Xin Long. 6) Fix recursive locking in ipv6 addrconf, from Subash Abhinov Kasiviswanathan. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: bpf: fix branch offset adjustment on backjumps after patching ctx expansion vxlan, gre, geneve: Set a large MTU on ovs-created tunnel devices geneve: Relax MTU constraints vxlan: Relax MTU constraints flow_dissector: Fix unaligned access in __skb_flow_dissector when used by eth_get_headlen of: of_mdio: Add marvell, 88e1145 to whitelist of PHY compatibilities. selinux: nlmsgtab: add SOCK_DESTROY to the netlink mapping tables sctp: translate network order to host order when users get a hmacid enic: increment devcmd2 result ring in case of timeout tg3: Fix for tg3 transmit queue 0 timed out when too many gso_segs net:Add sysctl_max_skb_frags tcp: do not drop syn_recv on all icmp reports ipv6: fix a lockdep splat unix: correctly track in-flight fds in sending process user_struct update be2net maintainers' email addresses dwc_eth_qos: Reset hardware before PHY start ipv6: addrconf: Fix recursive spin lock call
-
- 11 2月, 2016 8 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma由 Linus Torvalds 提交于
Pull rdma fixes from Doug Ledford: "A few more minor fixes for rc3: - One fix to ipoib - One fix to core sysfs code - Four patches that resolve an oops found in testing of ocrdma and a couple other ocrdma issues" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: RDMA/ocrdma: Fixing ocrdma debugfs directory remove RDMA/ocrdma: Fix pkey_index returned by driver in rq work completion RDMA/ocrdma: populate max_sge_rd in device attributes RDMA/ocrdma: Initialize stats resources in the driver before ib device registration. IB/sysfs: remove unused va_list args IB/IPoIB: Do not set skb truesize since using one linearskb
-
由 Daniel Borkmann 提交于
When ctx access is used, the kernel often needs to expand/rewrite instructions, so after that patching, branch offsets have to be adjusted for both forward and backward jumps in the new eBPF program, but for backward jumps it fails to account the delta. Meaning, for example, if the expansion happens exactly on the insn that sits at the jump target, it doesn't fix up the back jump offset. Analysis on what the check in adjust_branches() is currently doing: /* adjust offset of jmps if necessary */ if (i < pos && i + insn->off + 1 > pos) insn->off += delta; else if (i > pos && i + insn->off + 1 < pos) insn->off -= delta; First condition (forward jumps): Before: After: insns[0] insns[0] insns[1] <--- i/insn insns[1] <--- i/insn insns[2] <--- pos insns[P] <--- pos insns[3] insns[P] `------| delta insns[4] <--- target_X insns[P] `-----| insns[5] insns[3] insns[4] <--- target_X insns[5] First case is if we cross pos-boundary and the jump instruction was before pos. This is handeled correctly. I.e. if i == pos, then this would mean our jump that we currently check was the patchlet itself that we just injected. Since such patchlets are self-contained and have no awareness of any insns before or after the patched one, the delta is correctly not adjusted. Also, for the second condition in case of i + insn->off + 1 == pos, means we jump to that newly patched instruction, so no offset adjustment are needed. That part is correct. Second condition (backward jumps): Before: After: insns[0] insns[0] insns[1] <--- target_X insns[1] <--- target_X insns[2] <--- pos <-- target_Y insns[P] <--- pos <-- target_Y insns[3] insns[P] `------| delta insns[4] <--- i/insn insns[P] `-----| insns[5] insns[3] insns[4] <--- i/insn insns[5] Second interesting case is where we cross pos-boundary and the jump instruction was after pos. Backward jump with i == pos would be impossible and pose a bug somewhere in the patchlet, so the first condition checking i > pos is okay only by itself. However, i + insn->off + 1 < pos does not always work as intended to trigger the adjustment. It works when jump targets would be far off where the delta wouldn't matter. But, for example, where the fixed insn->off before pointed to pos (target_Y), it now points to pos + delta, so that additional room needs to be taken into account for the check. This means that i) both tests here need to be adjusted into pos + delta, and ii) for the second condition, the test needs to be <= as pos itself can be a target in the backjump, too. Fixes: 9bac3d6d ("bpf: allow extended BPF programs access skb fields") Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input由 Linus Torvalds 提交于
Pull input updates from Dmitry Torokhov: "Just small driver fixups" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: colibri-vf50-ts - add missing #include <linux/of.h> Input: adp5589 - fix row 5 handling for adp5589 Input: edt-ft5x06 - fix setting gain, offset, and threshold via device tree Input: vmmouse - fix absolute device registration Input: serio - drop warnings in case of EPROBE_DEFER from serio_find_driver() Input: cap11xx - add missing of_node_put Input: sirfsoc-onkey - allow modular build Input: xpad - remove unused function
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata由 Linus Torvalds 提交于
Pull libata fixes from Tejun Heo: - PORTS_IMPL workaround for very early ahci controllers is misbehaving on new systems. Disabled on recent ahci versions. - Old-style PIO state machine had a horrible locking problem. Don't know how we've been getting away this far. Fixed. - Other device specific updates. * 'for-4.5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: ahci: Intel DNV device IDs SATA libata: fix sff host state machine locking while polling libata-sff: use WARN instead of BUG on illegal host state machine state libata: disable forced PORTS_IMPL for >= AHCI 1.3 libata: blacklist a Viking flash model for MWDMA corruption drivers: ata: wake port before DMA stop for ALPM
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup由 Linus Torvalds 提交于
Pull cgroup fixes from Tejun Heo: - The destruction path of cgroup objects are asynchronous and multi-staged and some of them ended up destroying parents before children leading to failures in cpu and memory controllers. Ensure that parents are always destroyed after children. - cpuset mm node migration was performed synchronously while holding threadgroup and cgroup mutexes and the recent threadgroup locking update resulted in a possible deadlock. The migration is best effort and shouldn't have been performed under those locks to begin with. Made asynchronous. - Minor documentation fix. * 'for-4.5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: Documentation: cgroup: Fix 'cgroup-legacy' -> 'cgroup-v1' cgroup: make sure a parent css isn't freed before its children cgroup: make sure a parent css isn't offlined before its children cpuset: make mm migration asynchronous
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq由 Linus Torvalds 提交于
Pull workqueue fixes from Tejun Heo: "Workqueue fixes for v4.5-rc3. - Remove a spurious triggering of flush dependency warning. - Officially break local execution guarantee of unbound work items and add a debug feature to flush out usages which depend on it. - Work around CPU -> NODE mapping becoming invalid on CPU offline. The branch is young but pushing out early as stable kernels are being affected" * 'for-4.5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: workqueue: handle NUMA_NO_NODE for unbound pool_workqueue lookup workqueue: implement "workqueue.debug_force_rr_cpu" debug feature workqueue: schedule WORK_CPU_UNBOUND work on wq_unbound_cpumask CPUs Revert "workqueue: make sure delayed work run in local cpu" workqueue: skip flush dependency checks for legacy workqueues
-
由 Tejun Heo 提交于
When looking up the pool_workqueue to use for an unbound workqueue, workqueue assumes that the target CPU is always bound to a valid NUMA node. However, currently, when a CPU goes offline, the mapping is destroyed and cpu_to_node() returns NUMA_NO_NODE. This has always been broken but hasn't triggered often enough before 874bbfe6 ("workqueue: make sure delayed work run in local cpu"). After the commit, workqueue forcifully assigns the local CPU for delayed work items without explicit target CPU to fix a different issue. This widens the window where CPU can go offline while a delayed work item is pending causing delayed work items dispatched with target CPU set to an already offlined CPU. The resulting NUMA_NO_NODE mapping makes workqueue try to queue the work item on a NULL pool_workqueue and thus crash. While 874bbfe6 has been reverted for a different reason making the bug less visible again, it can still happen. Fix it by mapping NUMA_NO_NODE to the default pool_workqueue from unbound_pwq_by_node(). This is a temporary workaround. The long term solution is keeping CPU -> NODE mapping stable across CPU off/online cycles which is being worked on. Signed-off-by: NTejun Heo <tj@kernel.org> Reported-by: NMike Galbraith <umgwanakikbuti@gmail.com> Cc: Tang Chen <tangchen@cn.fujitsu.com> Cc: Rafael J. Wysocki <rafael@kernel.org> Cc: Len Brown <len.brown@intel.com> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/g/1454424264.11183.46.camel@gmail.com Link: http://lkml.kernel.org/g/1453702100-2597-1-git-send-email-tangchen@cn.fujitsu.com
-
由 Alexandra Yates 提交于
Adding Intel codename DNV platform device IDs for SATA. Signed-off-by: NAlexandra Yates <alexandra.yates@linux.intel.com> Signed-off-by: NTejun Heo <tj@kernel.org> Cc: stable@vger.kernel.org
-
- 10 2月, 2016 13 次提交
-
-
由 David S. Miller 提交于
David Wragg says: ==================== Set a large MTU on ovs-created tunnel devices Prior to 4.3, openvswitch tunnel vports (vxlan, gre and geneve) could transmit vxlan packets of any size, constrained only by the ability to send out the resulting packets. 4.3 introduced netdevs corresponding to tunnel vports. These netdevs have an MTU, which limits the size of a packet that can be successfully encapsulated. The default MTU values are low (1500 or less), which is awkwardly small in the context of physical networks supporting jumbo frames, and leads to a conspicuous change in behaviour for userspace. This patch series sets the MTU on openvswitch-created netdevs to be the relevant maximum (i.e. the maximum IP packet size minus any relevant overhead), effectively restoring the behaviour prior to 4.3. Where relevant, the limits on MTU values that can be directly set on the netdevs are also relaxed. Changes in v2: * Extend to all openvswitch tunnel types, i.e. gre and geneve as well * Use IP_MAX_MTU Changes in v3: * Fix block comment style ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David Wragg 提交于
Prior to 4.3, openvswitch tunnel vports (vxlan, gre and geneve) could transmit vxlan packets of any size, constrained only by the ability to send out the resulting packets. 4.3 introduced netdevs corresponding to tunnel vports. These netdevs have an MTU, which limits the size of a packet that can be successfully encapsulated. The default MTU values are low (1500 or less), which is awkwardly small in the context of physical networks supporting jumbo frames, and leads to a conspicuous change in behaviour for userspace. Instead, set the MTU on openvswitch-created netdevs to be the relevant maximum (i.e. the maximum IP packet size minus any relevant overhead), effectively restoring the behaviour prior to 4.3. Signed-off-by: NDavid Wragg <david@weave.works> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David Wragg 提交于
Allow the MTU of geneve devices to be set to large values, in order to exploit underlying networks with larger frame sizes. GENEVE does not have a fixed encapsulation overhead (an openvswitch rule can add variable length options), so there is no relevant maximum MTU to enforce. A maximum of IP_MAX_MTU is used instead. Encapsulated packets that are too big for the underlying network will get dropped on the floor. Signed-off-by: NDavid Wragg <david@weave.works> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David Wragg 提交于
Allow the MTU of vxlan devices without an underlying device to be set to larger values (up to a maximum based on IP packet limits and vxlan overhead). Previously, their MTUs could not be set to higher than the conventional ethernet value of 1500. This is a very arbitrary value in the context of vxlan, and prevented vxlan devices from being able to take advantage of jumbo frames etc. The default MTU remains 1500, for compatibility. Signed-off-by: NDavid Wragg <david@weave.works> Acked-by: NRoopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux由 Linus Torvalds 提交于
Pull module fixes from Rusty Russell: "Fix for async_probe module param added in 4.3 (clearly not widely used yet), and a much more interesting kallsyms race which has been around approximately forever. This fix is more invasive, and will require some care in backporting, but I hated all the bandaids I could think of, so... There are some more coming, which are only for breakages introduced this cycle (livepatch), but wanted these in now" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: modules: fix longstanding /proc/kallsyms vs module insertion race. module: wrapper for symbol name. modules: fix modparam async_probe request
-
由 Geert Uytterhoeven 提交于
drivers/input/touchscreen/colibri-vf50-ts.c: In function ‘vf50_ts_probe’: drivers/input/touchscreen/colibri-vf50-ts.c:302: error: implicit declaration of function ‘of_property_read_u32’ Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
由 Lars-Peter Clausen 提交于
The adp5589 has row 5, don't skip it when creating the GPIO mapping. Otherwise the pin gets reserved as used and it is not possible to use it as a GPIO. Signed-off-by: NLars-Peter Clausen <lars@metafoo.de> Acked-by: NMichael Hennerich <michael.hennerich@analog.com> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
由 Philipp Zabel 提交于
A recent patch broke parsing the gain, offset, and threshold parameters from device tree. Instead of setting the cached values and writing them to the correct registers during probe, it would write the values from DT into the register address variables and never write them to the chip during normal operation. Fixes: 2e23b7a9 ("Input: edt-ft5x06 - use generic properties API") Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
由 Tejun Heo 提交于
Workqueue used to guarantee local execution for work items queued without explicit target CPU. The guarantee is gone now which can break some usages in subtle ways. To flush out those cases, this patch implements a debug feature which forces round-robin CPU selection for all such work items. The debug feature defaults to off and can be enabled with a kernel parameter. The default can be flipped with a debug config option. If you hit this commit during bisection, please refer to 041bd12e ("Revert "workqueue: make sure delayed work run in local cpu"") for more information and ping me. Signed-off-by: NTejun Heo <tj@kernel.org>
-
由 Mike Galbraith 提交于
WORK_CPU_UNBOUND work items queued to a bound workqueue always run locally. This is a good thing normally, but not when the user has asked us to keep unbound work away from certain CPUs. Round robin these to wq_unbound_cpumask CPUs instead, as perturbation avoidance trumps performance. tj: Cosmetic and comment changes. WARN_ON_ONCE() dropped from empty (wq_unbound_cpumask AND cpu_online_mask). If we want that, it should be done when config changes. Signed-off-by: NMike Galbraith <umgwanakikbuti@gmail.com> Signed-off-by: NTejun Heo <tj@kernel.org>
-
由 Tejun Heo 提交于
This reverts commit 874bbfe6. Workqueue used to implicity guarantee that work items queued without explicit CPU specified are put on the local CPU. Recent changes in timer broke the guarantee and led to vmstat breakage which was fixed by 176bed1d ("vmstat: explicitly schedule per-cpu work on the CPU we need it to run on"). vmstat is the most likely to expose the issue and it's quite possible that there are other similar problems which are a lot more difficult to trigger. As a preventive measure, 874bbfe6 ("workqueue: make sure delayed work run in local cpu") was applied to restore the local CPU guarnatee. Unfortunately, the change exposed a bug in timer code which got fixed by 22b886dd ("timers: Use proper base migration in add_timer_on()"). Due to code restructuring, the commit couldn't be backported beyond certain point and stable kernels which only had 874bbfe6 started crashing. The local CPU guarantee was accidental more than anything else and we want to get rid of it anyway. As, with the vmstat case fixed, 874bbfe6 is causing more problems than it's fixing, it has been decided to take the chance and officially break the guarantee by reverting the commit. A debug feature will be added to force foreign CPU assignment to expose cases relying on the guarantee and fixes for the individual cases will be backported to stable as necessary. Signed-off-by: NTejun Heo <tj@kernel.org> Fixes: 874bbfe6 ("workqueue: make sure delayed work run in local cpu") Link: http://lkml.kernel.org/g/20160120211926.GJ10810@quack.suse.cz Cc: stable@vger.kernel.org Cc: Mike Galbraith <umgwanakikbuti@gmail.com> Cc: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Cc: Daniel Bilik <daniel.bilik@neosystem.cz> Cc: Jan Kara <jack@suse.cz> Cc: Shaohua Li <shli@fb.com> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: Ben Hutchings <ben@decadent.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Daniel Bilik <daniel.bilik@neosystem.cz> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Michal Hocko <mhocko@kernel.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6由 Linus Torvalds 提交于
Pull crypto fixes from Herbert Xu: "This fixes the following issues: API: - Fix async algif_skcipher, it was broken by recent fixes. - Fix potential race condition in algif_skcipher with ctx. - Fix potential memory corruption in algif_skcipher. - Add missing lock to crypto_user when doing an alg dump. Drivers: - marvell/cesa was testing the wrong variable for NULL after allocation. - Fix potential double-free in atmel-sha. - Fix illegal call to sleepin function from atomic context in atmel-sha" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: marvell/cesa - fix test in mv_cesa_dev_dma_init() crypto: atmel-sha - remove calls of clk_prepare() from atomic contexts crypto: atmel-sha - fix atmel_sha_remove() crypto: algif_skcipher - Do not set MAY_BACKLOG on the async path crypto: algif_skcipher - Do not dereference ctx without socket lock crypto: algif_skcipher - Do not assume that req is unchanged crypto: user - lock crypto_alg_list on alg dump
-
由 J. Bruce Fields 提交于
Long ago, Dave Jones complained about CONFIG_LOCALVERSION_AUTO: "I don't use the auto config, because I end up filling up /boot unless I go through and clean them out by hand every time I install a new one (which I do probably a dozen or so times a day). Is there some easy way to prune old builds I'm missing?" To which Bruce replied: "I run this by hand every now and then. I'm probably doing it all wrong" And if he is running it wrong, then so am I - because I've been using this script ever since. It is true that CONFIG_LOCALVERSION_AUTO easily ends up filling your /boot partition if you don't clean up old versions regularly, and this script helps make that easier. Checked with Bruce to see that it's fine to add this to the kernel scripts. Maybe people will come up with enhancements, but more importantly, this way I won't misplace this script whenever I install a new machine and start doing custom kernels for it. Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 09 2月, 2016 11 次提交
-
-
由 Alexander Duyck 提交于
This patch fixes an issue with unaligned accesses when using eth_get_headlen on a page that was DMA aligned instead of being IP aligned. The fact is when trying to check the length we don't need to be looking at the flow label so we can reorder the checks to first check if we are supposed to gather the flow label and then make the call to actually get it. v2: Updated path so that either STOP_AT_FLOW_LABEL or KEY_FLOW_LABEL can cause us to check for the flow label. Reported-by: NSowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: NAlexander Duyck <aduyck@mirantis.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Aaro Koskinen 提交于
Commit ae461131 ("of: of_mdio: Add a whitelist of PHY compatibilities.") missed one compatible string used in in-tree DTBs: in OCTEON, for selected boards, the kernel DTB pruning code will overwrite the DTB compatible string with "marvell,88e1145", which is missing from the whitelist. Add it. The patch fixes broken networking on EdgeRouter Lite. Fixes: ae461131 ("of: of_mdio: Add a whitelist of PHY compatibilities.") Signed-off-by: NAaro Koskinen <aaro.koskinen@iki.fi> Reviewed-by: NAndrew Lunn <andrew@lunn.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Lorenzo Colitti 提交于
Without this, using SOCK_DESTROY in enforcing mode results in: SELinux: unrecognized netlink message type=21 for sclass=32 Signed-off-by: NLorenzo Colitti <lorenzo@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Xin Long 提交于
Commit ed5a377d ("sctp: translate host order to network order when setting a hmacid") corrected the hmacid byte-order when setting a hmacid. but the same issue also exists on getting a hmacid. We fix it by changing hmacids to host order when users get them with getsockopt. Fixes: Commit ed5a377d ("sctp: translate host order to network order when setting a hmacid") Signed-off-by: NXin Long <lucien.xin@gmail.com> Acked-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sandeep Pillai 提交于
Firmware posts the devcmd result in result ring. In case of timeout, driver does not increment the current result pointer and firmware could post the result after timeout has occurred. During next devcmd, driver would be reading the result of previous devcmd. Fix this by incrementing result even in case of timeout. Fixes: 373fb087 ("enic: add devcmd2") Signed-off-by: NSandeep Pillai <sanpilla@cisco.com> Signed-off-by: NGovindarajulu Varadarajan <_govind@gmx.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Siva Reddy Kallam 提交于
tg3_tso_bug() can hit a condition where the entire tx ring is not big enough to segment the GSO packet. For example, if MSS is very small, gso_segs can exceed the tx ring size. When we hit the condition, it will cause tx timeout. tg3_tso_bug() is called to handle TSO and DMA hardware bugs. For TSO bugs, if tg3_tso_bug() cannot succeed, we have to drop the packet. For DMA bugs, we can still fall back to linearize the SKB and let the hardware transmit the TSO packet. This patch adds a function tg3_tso_bug_gso_check() to check if there are enough tx descriptors for GSO before calling tg3_tso_bug(). The caller will then handle the error appropriately - drop or lineraize the SKB. v2: Corrected patch description to avoid confusion. Signed-off-by: NSiva Reddy Kallam <siva.kallam@broadcom.com> Signed-off-by: NMichael Chan <mchan@broadcom.com> Acked-by: NPrashant Sreedharan <prashant@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hans Westgaard Ry 提交于
Devices may have limits on the number of fragments in an skb they support. Current codebase uses a constant as maximum for number of fragments one skb can hold and use. When enabling scatter/gather and running traffic with many small messages the codebase uses the maximum number of fragments and may thereby violate the max for certain devices. The patch introduces a global variable as max number of fragments. Signed-off-by: NHans Westgaard Ry <hans.westgaard.ry@oracle.com> Reviewed-by: NHåkon Bugge <haakon.bugge@oracle.com> Acked-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Petr Novopashenniy reported that ICMP redirects on SYN_RECV sockets were leading to RST. This is of course incorrect. A specific list of ICMP messages should be able to drop a SYN_RECV. For instance, a REDIRECT on SYN_RECV shall be ignored, as we do not hold a dst per SYN_RECV pseudo request. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=111751 Fixes: 079096f1 ("tcp/dccp: install syn_recv requests into ehash table") Reported-by: NPetr Novopashenniy <pety@rusnet.ru> Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/virt/kvm/kvm由 Linus Torvalds 提交于
Pull KVM fixes from Paolo Bonzini: "KVM-ARM fixes, mostly coming from the PMU work" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: arm64: KVM: Fix guest dead loop when register accessor returns false arm64: KVM: Fix comments of the CP handler arm64: KVM: Fix wrong use of the CPSR MODE mask for 32bit guests arm64: KVM: Obey RES0/1 reserved bits when setting CPTR_EL2 arm64: KVM: Fix AArch64 guest userspace exception injection
-
由 Linus Torvalds 提交于
Merge tag 'regmap-fix-v4.5-big-endian' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap Pull regmap fix from Mark Brown: "A single revert back to v4.4 endianness handling. Commit 29bb45f2 ("regmap-mmio: Use native endianness for read/write") attempted to fix some long standing bugs in the MMIO implementation for big endian systems caused by duplicate byte swapping in both regmap and readl()/writel(). Sadly the fix makes things worse rather than better, so revert it for now" * tag 'regmap-fix-v4.5-big-endian' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: regmap: mmio: Revert to v4.4 endianness handling
-
由 Masahiro Yamada 提交于
Fix the doubled "started" and tidy up the following sentences. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 08 2月, 2016 6 次提交
-
-
由 Eric Dumazet 提交于
Silence lockdep false positive about rcu_dereference() being used in the wrong context. First one should use rcu_dereference_protected() as we own the spinlock. Second one should be a normal assignation, as no barrier is needed. Fixes: 18367681 ("ipv6 flowlabel: Convert np->ipv6_fl_list to RCU.") Reported-by: NDave Jones <davej@codemonkey.org.uk> Signed-off-by: NEric Dumazet <edumazet@google.com> Acked-by: NHannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hannes Frederic Sowa 提交于
The commit referenced in the Fixes tag incorrectly accounted the number of in-flight fds over a unix domain socket to the original opener of the file-descriptor. This allows another process to arbitrary deplete the original file-openers resource limit for the maximum of open files. Instead the sending processes and its struct cred should be credited. To do so, we add a reference counted struct user_struct pointer to the scm_fp_list and use it to account for the number of inflight unix fds. Fixes: 712f4aad ("unix: properly account for FDs passed over unix sockets") Reported-by: NDavid Herrmann <dh.herrmann@gmail.com> Cc: David Herrmann <dh.herrmann@gmail.com> Cc: Willy Tarreau <w@1wt.eu> Cc: Linus Torvalds <torvalds@linux-foundation.org> Suggested-by: NLinus Torvalds <torvalds@linux-foundation.org> Signed-off-by: NHannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Paolo Bonzini 提交于
Merge tag 'kvm-arm-for-4.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into kvm-master KVM/ARM fixes for v4.5-rc2 A few random fixes, mostly coming from the PMU work by Shannon: - fix for injecting faults coming from the guest's userspace - cleanup for our CPTR_EL2 accessors (reserved bits) - fix for a bug impacting perf (user/kernel discrimination) - fix for a 32bit sysreg handling bug
-
由 Linus Torvalds 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc由 Linus Torvalds 提交于
Pull ARM SoC fixes from Olof Johansson: "The first real batch of fixes for this release cycle, so there are a few more than usual. Most of these are fixes and tweaks to board support (DT bugfixes, etc). I've also picked up a couple of small cleanups that seemed innocent enough that there was little reason to wait (const/ __initconst and Kconfig deps). Quite a bit of the changes on OMAP were due to fixes to no longer write to rodata from assembly when ARM_KERNMEM_PERMS was enabled, but there were also other fixes. Kirkwood had a bunch of gpio fixes for some boards. OMAP had RTC fixes on OMAP5, and Nomadik had changes to MMC parameters in DT. All in all, mostly the usual mix of various fixes" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (46 commits) ARM: multi_v7_defconfig: enable DW_WATCHDOG ARM: nomadik: fix up SD/MMC DT settings ARM64: tegra: Add chosen node for tegra132 norrin ARM: realview: use "depends on" instead of "if" after prompt ARM: tango: use "depends on" instead of "if" after prompt ARM: tango: use const and __initconst for smp_operations ARM: realview: use const and __initconst for smp_operations bus: uniphier-system-bus: revive tristate prompt arm64: dts: Add missing DMA Abort interrupt to Juno bus: vexpress-config: Add missing of_node_put ARM: dts: am57xx: sbc-am57x: correct Eth PHY settings ARM: dts: am57xx: cl-som-am57x: fix CPSW EMAC pinmux ARM: dts: am57xx: sbc-am57x: fix UART3 pinmux ARM: dts: am57xx: cl-som-am57x: update SPI Flash frequency ARM: dts: am57xx: cl-som-am57x: set HOST mode for USB2 ARM: dts: am57xx: sbc-am57x: fix SB-SOM EEPROM I2C address ARM: dts: LogicPD Torpedo: Revert Duplicative Entries ARM: dts: am437x: pixcir_tangoc: use correct flags for irq types ARM: dts: am4372: fix irq type for arm twd and global timer ARM: dts: at91: sama5d4 xplained: fix phy0 IRQ type ...
-
git://git.linaro.org/landing-teams/working/fujitsu/integration由 Linus Torvalds 提交于
Pull mailbox fixes from Jassi Brar: - fix getting element from the pcc-channels array by simply indexing into it - prevent building mailbox-test driver for archs that don't have IOMEM * 'mailbox-devel' of git://git.linaro.org/landing-teams/working/fujitsu/integration: mailbox: Fix dependencies for !HAS_IOMEM archs mailbox: pcc: fix channel calculation in get_pcc_channel()
-