- 07 6月, 2014 1 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull scheduler fixes from Ingo Molnar: "Four misc fixes: each was deemed serious enough to warrant v3.15 inclusion" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/fair: Fix tg_set_cfs_bandwidth() deadlock on rq->lock sched/dl: Fix race in dl_task_timer() sched: Fix sched_policy < 0 comparison sched/numa: Fix use of spin_{un}lock_irq() when interrupts are disabled
-
- 06 6月, 2014 7 次提交
-
-
由 Andrey Ryabinin 提交于
While working address sanitizer for kernel I've discovered use-after-free bug in __put_anon_vma. For the last anon_vma, anon_vma->root freed before child anon_vma. Later in anon_vma_free(anon_vma) we are referencing to already freed anon_vma->root to check rwsem. This fixes it by freeing the child anon_vma before freeing anon_vma->root. Signed-off-by: NAndrey Ryabinin <a.ryabinin@samsung.com> Acked-by: NPeter Zijlstra <peterz@infradead.org> Cc: <stable@vger.kernel.org> # v3.0+ Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull perf fixes from Ingo Molnar: "Two last minute tooling fixes" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf probe: Fix perf probe to find correct variable DIE perf probe: Fix a segfault if asked for variable it doesn't find
-
由 Linus Torvalds 提交于
Merge futex fixes from Thomas Gleixner: "So with more awake and less futex wreckaged brain, I went through my list of points again and came up with the following 4 patches. 1) Prevent pi requeueing on the same futex I kept Kees check for uaddr1 == uaddr2 as a early check for private futexes and added a key comparison to both futex_requeue and futex_wait_requeue_pi. Sebastian, sorry for the confusion yesterday night. I really misunderstood your question. You are right the check is pointless for shared futexes where the same physical address is mapped to two different virtual addresses. 2) Sanity check atomic acquisiton in futex_lock_pi_atomic That's basically what Darren suggested. I just simplified it to use futex_top_waiter() to find kernel internal state. If state is found return -EINVAL and do not bother to fix up the user space variable. It's corrupted already. 3) Ensure state consistency in futex_unlock_pi The code is silly versus the owner died bit. There is no point to preserve it on unlock when the user space thread owns the futex. What's worse is that it does not update the user space value when the owner died bit is set. So the kernel itself creates observable inconsistency. Another "optimization" is to retry an atomic unlock. That's pointless as in a sane environment user space would not call into that code if it could have unlocked it atomically. So we always check whether there is kernel state around and only if there is none, we do the unlock by setting the user space value to 0. 4) Sanitize lookup_pi_state lookup_pi_state is ambigous about TID == 0 in the user space value. This can be a valid state even if there is kernel state on this uaddr, but we miss a few corner case checks. I tried to come up with a smaller solution hacking the checks into the current cruft, but it turned out to be ugly as hell and I got more confused than I was before. So I rewrote the sanity checks along the state documentation with awful lots of commentry" * emailed patches from Thomas Gleixner <tglx@linutronix.de>: futex: Make lookup_pi_state more robust futex: Always cleanup owner tid in unlock_pi futex: Validate atomic acquisition in futex_lock_pi_atomic() futex-prevent-requeue-pi-on-same-futex.patch futex: Forbid uaddr == uaddr2 in futex_requeue(..., requeue_pi=1)
-
由 Thomas Gleixner 提交于
The current implementation of lookup_pi_state has ambigous handling of the TID value 0 in the user space futex. We can get into the kernel even if the TID value is 0, because either there is a stale waiters bit or the owner died bit is set or we are called from the requeue_pi path or from user space just for fun. The current code avoids an explicit sanity check for pid = 0 in case that kernel internal state (waiters) are found for the user space address. This can lead to state leakage and worse under some circumstances. Handle the cases explicit: Waiter | pi_state | pi->owner | uTID | uODIED | ? [1] NULL | --- | --- | 0 | 0/1 | Valid [2] NULL | --- | --- | >0 | 0/1 | Valid [3] Found | NULL | -- | Any | 0/1 | Invalid [4] Found | Found | NULL | 0 | 1 | Valid [5] Found | Found | NULL | >0 | 1 | Invalid [6] Found | Found | task | 0 | 1 | Valid [7] Found | Found | NULL | Any | 0 | Invalid [8] Found | Found | task | ==taskTID | 0/1 | Valid [9] Found | Found | task | 0 | 0 | Invalid [10] Found | Found | task | !=taskTID | 0/1 | Invalid [1] Indicates that the kernel can acquire the futex atomically. We came came here due to a stale FUTEX_WAITERS/FUTEX_OWNER_DIED bit. [2] Valid, if TID does not belong to a kernel thread. If no matching thread is found then it indicates that the owner TID has died. [3] Invalid. The waiter is queued on a non PI futex [4] Valid state after exit_robust_list(), which sets the user space value to FUTEX_WAITERS | FUTEX_OWNER_DIED. [5] The user space value got manipulated between exit_robust_list() and exit_pi_state_list() [6] Valid state after exit_pi_state_list() which sets the new owner in the pi_state but cannot access the user space value. [7] pi_state->owner can only be NULL when the OWNER_DIED bit is set. [8] Owner and user space value match [9] There is no transient state which sets the user space TID to 0 except exit_robust_list(), but this is indicated by the FUTEX_OWNER_DIED bit. See [4] [10] There is no transient state which leaves owner and user space TID out of sync. Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Cc: Kees Cook <keescook@chromium.org> Cc: Will Drewry <wad@chromium.org> Cc: Darren Hart <dvhart@linux.intel.com> Cc: stable@vger.kernel.org Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Thomas Gleixner 提交于
If the owner died bit is set at futex_unlock_pi, we currently do not cleanup the user space futex. So the owner TID of the current owner (the unlocker) persists. That's observable inconsistant state, especially when the ownership of the pi state got transferred. Clean it up unconditionally. Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Cc: Kees Cook <keescook@chromium.org> Cc: Will Drewry <wad@chromium.org> Cc: Darren Hart <dvhart@linux.intel.com> Cc: stable@vger.kernel.org Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Thomas Gleixner 提交于
We need to protect the atomic acquisition in the kernel against rogue user space which sets the user space futex to 0, so the kernel side acquisition succeeds while there is existing state in the kernel associated to the real owner. Verify whether the futex has waiters associated with kernel state. If it has, return -EINVAL. The state is corrupted already, so no point in cleaning it up. Subsequent calls will fail as well. Not our problem. [ tglx: Use futex_top_waiter() and explain why we do not need to try restoring the already corrupted user space state. ] Signed-off-by: NDarren Hart <dvhart@linux.intel.com> Cc: Kees Cook <keescook@chromium.org> Cc: Will Drewry <wad@chromium.org> Cc: stable@vger.kernel.org Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Thomas Gleixner 提交于
futex-prevent-requeue-pi-on-same-futex.patch futex: Forbid uaddr == uaddr2 in futex_requeue(..., requeue_pi=1) If uaddr == uaddr2, then we have broken the rule of only requeueing from a non-pi futex to a pi futex with this call. If we attempt this, then dangling pointers may be left for rt_waiter resulting in an exploitable condition. This change brings futex_requeue() in line with futex_wait_requeue_pi() which performs the same check as per commit 6f7b0a2a ("futex: Forbid uaddr == uaddr2 in futex_wait_requeue_pi()") [ tglx: Compare the resulting keys as well, as uaddrs might be different depending on the mapping ] Fixes CVE-2014-3153. Reported-by: Pinkie Pie Signed-off-by: NWill Drewry <wad@chromium.org> Signed-off-by: NKees Cook <keescook@chromium.org> Cc: stable@vger.kernel.org Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Reviewed-by: NDarren Hart <dvhart@linux.intel.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 05 6月, 2014 7 次提交
-
-
由 Roman Gushchin 提交于
tg_set_cfs_bandwidth() sets cfs_b->timer_active to 0 to force the period timer restart. It's not safe, because can lead to deadlock, described in commit 927b54fc: "__start_cfs_bandwidth calls hrtimer_cancel while holding rq->lock, waiting for the hrtimer to finish. However, if sched_cfs_period_timer runs for another loop iteration, the hrtimer can attempt to take rq->lock, resulting in deadlock." Three CPUs must be involved: CPU0 CPU1 CPU2 take rq->lock period timer fired ... take cfs_b lock ... ... tg_set_cfs_bandwidth() throttle_cfs_rq() release cfs_b lock take cfs_b lock ... distribute_cfs_runtime() timer_active = 0 take cfs_b->lock wait for rq->lock ... __start_cfs_bandwidth() {wait for timer callback break if timer_active == 1} So, CPU0 and CPU1 are deadlocked. Instead of resetting cfs_b->timer_active, tg_set_cfs_bandwidth can wait for period timer callbacks (ignoring cfs_b->timer_active) and restart the timer explicitly. Signed-off-by: NRoman Gushchin <klamm@yandex-team.ru> Reviewed-by: NBen Segall <bsegall@google.com> Signed-off-by: NPeter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/87wqdi9g8e.wl\%klamm@yandex-team.ru Cc: pjt@google.com Cc: chris.j.arges@canonical.com Cc: gregkh@linuxfoundation.org Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Kirill Tkhai 提交于
Throttled task is still on rq, and it may be moved to other cpu if user is playing with sched_setaffinity(). Therefore, unlocked task_rq() access makes the race. Juri Lelli reports he got this race when dl_bandwidth_enabled() was not set. Other thing, pointed by Peter Zijlstra: "Now I suppose the problem can still actually happen when you change the root domain and trigger a effective affinity change that way". To fix that we do the same as made in __task_rq_lock(). We do not use __task_rq_lock() itself, because it has a useful lockdep check, which is not correct in case of dl_task_timer(). We do not need pi_lock locked here. This case is an exception (PeterZ): "The only reason we don't strictly need ->pi_lock now is because we're guaranteed to have p->state == TASK_RUNNING here and are thus free of ttwu races". Signed-off-by: NKirill Tkhai <tkhai@yandex.ru> Signed-off-by: NPeter Zijlstra <peterz@infradead.org> Cc: <stable@vger.kernel.org> # v3.14+ Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/3056991400578422@web14g.yandex.ruSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Richard Weinberger 提交于
attr.sched_policy is u32, therefore a comparison against < 0 is never true. Fix this by casting sched_policy to int. This issue was reported by coverity CID 1219934. Fixes: dbdb2275 ("sched: Disallow sched_attr::sched_policy < 0") Signed-off-by: NRichard Weinberger <richard@nod.at> Signed-off-by: NPeter Zijlstra <peterz@infradead.org> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/1401741514-7045-1-git-send-email-richard@nod.atSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Steven Rostedt 提交于
As Peter Zijlstra told me, we have the following path: do_exit() exit_itimers() itimer_delete() spin_lock_irqsave(&timer->it_lock, &flags); timer_delete_hook(timer); kc->timer_del(timer) := posix_cpu_timer_del() put_task_struct() __put_task_struct() task_numa_free() spin_lock(&grp->lock); Which means that task_numa_free() can be called with interrupts disabled, which means that we should not be using spin_lock_irq() but spin_lock_irqsave() instead. Otherwise we are enabling interrupts while holding an interrupt unsafe lock! Signed-off-by: NSteven Rostedt <rostedt@goodmis.org> Signed-off-by: NPeter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner<tglx@linutronix.de> Cc: Mike Galbraith <umgwanakikbuti@gmail.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/20140527182541.GH11096@twins.programming.kicks-ass.netSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Ingo Molnar 提交于
Merge tag 'perf-urgent-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/jolsa/perf into perf/urgent Pull perf/urgent fixes from Jiri Olsa: * Fix perf probe to find correct variable DIE (Masami Hiramatsu) * Fix a segfault in perf probe if asked for variable it doesn't find (Masami Hiramatsu) Signed-off-by: NJiri Olsa <jolsa@kernel.org> Acked-by: NPeter Zijlstra <peterz@infradead.org> Signed-off-by: NIngo Molnar <mingo@kernel.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu由 Linus Torvalds 提交于
Pull percpu fix from Tejun Heo: "It is very late but this is an important percpu-refcount fix from Sebastian Ott. The problem is that percpu_ref_*() used __this_cpu_*() instead of this_cpu_*(). The difference between the two is that the latter is atomic on the local cpu while the former is not. this_cpu_inc() is guaranteed to increment the percpu counter on the cpu that the operation is executed on without any synchronization; however, __this_cpu_inc() doesn't and if the local cpu invokes the function from different contexts (e.g. process and irq) of the same CPU, it's not guaranteed to actually increment as it may be implemented as rmw. This bug existed from the get-go but it hasn't been noticed earlier probably because on x86 __this_cpu_inc() is equivalent to this_cpu_inc() as both get translated into single instruction; however, s390 uses the generic rmw implementation and gets affected by the bug. Kudos to Sebastian and Heiko for diagnosing it. The change is very low risk and fixes a critical issue on the affected architectures, so I think it's a good candidate for inclusion although it's very late in the devel cycle. On the other hand, this has been broken since v3.11, so backporting it through -stable post -rc1 won't be the end of the world. I'll ping Christoph whether __this_cpu_*() ops can be better annotated so that it can trigger lockdep warning when used from multiple contexts" * 'for-3.15-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: percpu-refcount: fix usage of this_cpu_ops
-
由 Sebastian Ott 提交于
The percpu-refcount infrastructure uses the underscore variants of this_cpu_ops in order to modify percpu reference counters. (e.g. __this_cpu_inc()). However the underscore variants do not atomically update the percpu variable, instead they may be implemented using read-modify-write semantics (more than one instruction). Therefore it is only safe to use the underscore variant if the context is always the same (process, softirq, or hardirq). Otherwise it is possible to lose updates. This problem is something that Sebastian has seen within the aio subsystem which uses percpu refcounters both in process and softirq context leading to reference counts that never dropped to zeroes; even though the number of "get" and "put" calls matched. Fix this by using the non-underscore this_cpu_ops variant which provides correct per cpu atomic semantics and fixes the corrupted reference counts. Cc: Kent Overstreet <kmo@daterainc.com> Cc: <stable@vger.kernel.org> # v3.11+ Reported-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NTejun Heo <tj@kernel.org> References: http://lkml.kernel.org/g/alpine.LFD.2.11.1406041540520.21183@denkbrett
-
- 04 6月, 2014 6 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm由 Linus Torvalds 提交于
Pull intel pstate fixes from Rafael Wysocki: "Final power management fixes for 3.15 - Taking non-idle time into account when calculating core busy time was a mistake and led to a performance regression. Since the problem it was supposed to address is now taken care of in a different way, we don't need to do it any more, so drop the non-idle time tracking from intel_pstate. Dirk Brandewie. - Changing to fixed point math throughout the busy calculation introduced rounding errors that adversely affect the accuracy of intel_pstate's computations. Fix from Dirk Brandewie. - The PID controller algorithm used by intel_pstate assumes that the time interval between two adjacent samples will always be the same which is not the case for deferable timers (used by intel_pstate) when the system is idle. This leads to inaccurate predictions and artificially increases convergence times for the minimum P-state. Fix from Dirk Brandewie. - intel_pstate carries out computations using 32-bit variables that may overflow for large enough values of APERF/MPERF. Switch to using 64-bit variables for computations, from Doug Smythies" * tag 'pm-3.15-final' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: intel_pstate: Improve initial busy calculation intel_pstate: add sample time scaling intel_pstate: Correct rounding in busy calculation intel_pstate: Remove C0 tracking
-
git://people.freedesktop.org/~airlied/linux由 Linus Torvalds 提交于
Pull drm fixes from Dave Airlie: "All fairly small: radeon stability and a panic path fix. Mostly radeon fixes, suspend/resume fix, stability on the CIK chipsets, along with a locking check avoidance patch for panic times regression" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/radeon: use the CP DMA on CIK drm/radeon: sync page table updates drm/radeon: fix vm buffer size estimation drm/crtc-helper: skip locking checks in panicking path drm/radeon/dpm: resume fixes for some systems
-
由 Masami Hiramatsu 提交于
Fix perf probe to find correct variable DIE which has location or external instance by tracking down the lexical blocks. Current die_find_variable() expects that the all variable DIEs which has DW_TAG_variable have a location. However, since recent dwarf information may have declaration variable DIEs at the entry of function (subprogram), die_find_variable() returns it. To solve this problem, it must track down the DIE tree to find a DIE which has an actual location or a reference for external instance. e.g. finding a DIE which origin is <0xdc73>; <1><11496>: Abbrev Number: 95 (DW_TAG_subprogram) <11497> DW_AT_abstract_origin: <0xdc42> <1149b> DW_AT_low_pc : 0x1850 [...] <2><114cc>: Abbrev Number: 119 (DW_TAG_variable) <- this is a declaration <114cd> DW_AT_abstract_origin: <0xdc73> <2><114d1>: Abbrev Number: 119 (DW_TAG_variable) [...] <3><115a7>: Abbrev Number: 105 (DW_TAG_lexical_block) <115a8> DW_AT_ranges : 0xaa0 <4><115ac>: Abbrev Number: 96 (DW_TAG_variable) <- this has a location <115ad> DW_AT_abstract_origin: <0xdc73> <115b1> DW_AT_location : 0x486c (location list) Signed-off-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Tested-by: NArnaldo Carvalho de Melo <acme@kernel.org> Acked-by: NArnaldo Carvalho de Melo <acme@kernel.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/20140529121930.30879.87092.stgit@ltc230.yrl.intra.hitachi.co.jpSigned-off-by: NJiri Olsa <jolsa@kernel.org>
-
由 Masami Hiramatsu 提交于
Fix a segfault bug by asking for variable it doesn't find. Since the convert_variable() didn't handle error code returned from convert_variable_location(), it just passed an incomplete variable field and then a segfault was occurred when formatting the field. This fixes that bug by handling success code correctly in convert_variable(). Other callers of convert_variable_location() are correctly checking the return code. This bug was introduced by following commit. But another hidden erroneous error handling has been there previously (-ENOMEM case). commit 3d918a12Signed-off-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reported-by: NArnaldo Carvalho de Melo <acme@kernel.org> Tested-by: NArnaldo Carvalho de Melo <acme@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/20140529105232.28251.30447.stgit@ltc230.yrl.intra.hitachi.co.jpSigned-off-by: NJiri Olsa <jolsa@kernel.org>
-
git://people.freedesktop.org/~deathsimple/linux由 Dave Airlie 提交于
The first one is a one liner fixing a stupid typo in the VM handling code and is only relevant if play with one of the VM defines. The other two switches CIK to use the CPDMA instead of the SDMA for buffer moves, as it turned out the SDMA is still sometimes not 100% reliable. * 'drm-fixes-3.15' of git://people.freedesktop.org/~deathsimple/linux: drm/radeon: use the CP DMA on CIK drm/radeon: sync page table updates drm/radeon: fix vm buffer size estimation
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound由 Linus Torvalds 提交于
Pull sound fixes from Takashi Iwai: "A few addition of HD-audio fixups for ALC260 and AD1986A codecs. All marked as stable fixes. The fixes are pretty local and they are old machines, so quite safe to apply" * tag 'sound-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda/realtek - Fix COEF widget NID for ALC260 replacer fixup ALSA: hda/realtek - Correction of fixup codes for PB V7900 laptop ALSA: hda/analog - Fix silent output on ASUS A8JN
-
- 03 6月, 2014 18 次提交
-
-
由 Jianyu Zhan 提交于
There is still one residue of sysfs remaining: the sb_magic SYSFS_MAGIC. However this should be kernfs user specific, so this patch moves it out. Kerrnfs user should specify their magic number while mouting. Signed-off-by: NJianyu Zhan <nasa4836@gmail.com> Acked-by: NTejun Heo <tj@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
Pull networking fixes from David Miller: 1) Unbreak zebra and other netlink apps, from Eric W Biederman. 2) Some new qmi_wwan device IDs, from Aleksander Morgado. 3) Fix info leak in DCB netlink handler of qlcnic driver, from Dan Carpenter. 4) inet_getid() and ipv6_select_ident() do not generate monotonically increasing ID numbers, fix from Eric Dumazet. 5) Fix memory leak in __sk_prepare_filter(), from Leon Yu. 6) Netlink leftover bytes warning message is user triggerable, rate limit it. From Michal Schmidt. 7) Fix non-linear SKB panic in ipvs, from Peter Christensen. 8) Congestion window undo needs to be performed even if only never retransmitted data is SACK'd, fix from Yuching Cheng. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (24 commits) net: filter: fix possible memory leak in __sk_prepare_filter() net: ec_bhf: Add runtime dependencies tcp: fix cwnd undo on DSACK in F-RTO netlink: Only check file credentials for implicit destinations ipheth: Add support for iPad 2 and iPad 3 team: fix mtu setting net: fix inet_getid() and ipv6_select_ident() bugs net: qmi_wwan: interface #11 in Sierra Wireless MC73xx is not QMI net: qmi_wwan: add additional Sierra Wireless QMI devices bridge: Prevent insertion of FDB entry with disallowed vlan netlink: rate-limit leftover bytes warning and print process name bridge: notify user space after fdb update net: qmi_wwan: add Netgear AirCard 341U net: fix wrong mac_len calculation for vlans batman-adv: fix NULL pointer dereferences net/mlx4_core: Reset RoCE VF gids when guest driver goes down emac: aggregation of v1-2 PLB errors for IER register emac: add missing support of 10mbit in emac/rgmii can: only rename enabled led triggers when changing the netdev name ipvs: Fix panic due to non-linear skb ...
-
由 Leon Yu 提交于
__sk_prepare_filter() was reworked in commit bd4cf0ed (net: filter: rework/optimize internal BPF interpreter's instruction set) so that it should have uncharged memory once things went wrong. However that work isn't complete. Error is handled only in __sk_migrate_filter() while memory can still leak in the error path right after sk_chk_filter(). Fixes: bd4cf0ed ("net: filter: rework/optimize internal BPF interpreter's instruction set") Signed-off-by: NLeon Yu <chianglungyu@gmail.com> Acked-by: NAlexei Starovoitov <ast@plumgrid.com> Tested-by: NAlexei Starovoitov <ast@plumgrid.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://neil.brown.name/md由 Linus Torvalds 提交于
Pull two md bugfixes from Neil Brown: "Two md bugfixes for possible corruption when restarting reshape If a raid5/6 reshape is restarted (After stopping and re-assembling the array) and the array is marked read-only (or read-auto), then the reshape will appear to complete immediately, without actually moving anything around. This can result in corruption. There are two patches which do much the same thing in different places. They are separate because one is an older bug and so can be applied to more -stable kernels" * tag 'md/3.15-fixes' of git://neil.brown.name/md: md: always set MD_RECOVERY_INTR when interrupting a reshape thread. md: always set MD_RECOVERY_INTR when aborting a reshape or other "resync".
-
由 Jean Delvare 提交于
The ec_bhf driver is specific to the Beckhoff CX embedded PC series. These are based on Intel x86 CPU. So we can add a dependency on X86, with COMPILE_TEST as an alternative to still allow for broader build-testing. Signed-off-by: NJean Delvare <jdelvare@suse.de> Cc: Darek Marcinkiewicz <reksio@newterm.pl> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Martin K. Petersen 提交于
Queued trim only works for some users with MU05 firmware. Revert to blacklisting all firmware versions. Introduced by commit d121f7d0 ("libata: Update queued trim blacklist for M5x0 drives") which this effectively reverts, while retaining the blacklisting of M550. See https://bugzilla.kernel.org/show_bug.cgi?id=71371 for reports of trouble with MU05 firmware. Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Tejun Heo <tj@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 fix from Peter Anvin: "A single quite small patch that managed to get overlooked earlier, to prevent a user space triggerable oops on systems without HPET" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, vdso: Fix an OOPS accessing the HPET mapping w/o an HPET
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb由 Linus Torvalds 提交于
Pull USB fixes from Greg KH: "Here are some fixes for 3.15-rc8 that resolve a number of tiny USB issues that have been reported, and there are some new device ids as well. All have been tested in linux-next" * tag 'usb-3.15-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: xhci: delete endpoints from bandwidth list before freeing whole device usb: pci-quirks: Prevent Sony VAIO t-series from switching usb ports USB: cdc-wdm: properly include types.h usb: cdc-wdm: export cdc-wdm uapi header USB: serial: option: add support for Novatel E371 PCIe card USB: ftdi_sio: add NovaTech OrionLXm product ID USB: io_ti: fix firmware download on big-endian machines (part 2) USB: Avoid runtime suspend loops for HCDs that can't handle suspend/resume
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging由 Linus Torvalds 提交于
Pull staging driver fixes from Greg KH: "Here are some staging driver fixes for 3.15. Three are for the speakup drivers (one fixes a regression caused in 3.15-rc, and the other two resolve a tty issue found by Ben Hutchings) The comedi and r8192e_pci driver fixes also resolve reported issues" * tag 'staging-3.15-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: r8192e_pci: fix htons error Staging: speakup: Update __speakup_paste_selection() tty (ab)usage to match vt Staging: speakup: Move pasting into a work item staging: comedi: ni_daq_700: add mux settling delay speakup: fix incorrect perms on speakup_acntsa.c
-
由 Yuchung Cheng 提交于
This bug is discovered by an recent F-RTO issue on tcpm list https://www.ietf.org/mail-archive/web/tcpm/current/msg08794.html The bug is that currently F-RTO does not use DSACK to undo cwnd in certain cases: upon receiving an ACK after the RTO retransmission in F-RTO, and the ACK has DSACK indicating the retransmission is spurious, the sender only calls tcp_try_undo_loss() if some never retransmisted data is sacked (FLAG_ORIG_DATA_SACKED). The correct behavior is to unconditionally call tcp_try_undo_loss so the DSACK information is used properly to undo the cwnd reduction. Signed-off-by: NYuchung Cheng <ycheng@google.com> Signed-off-by: NNeal Cardwell <ncardwell@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric W. Biederman 提交于
It was possible to get a setuid root or setcap executable to write to it's stdout or stderr (which has been set made a netlink socket) and inadvertently reconfigure the networking stack. To prevent this we check that both the creator of the socket and the currentl applications has permission to reconfigure the network stack. Unfortunately this breaks Zebra which always uses sendto/sendmsg and creates it's socket without any privileges. To keep Zebra working don't bother checking if the creator of the socket has privilege when a destination address is specified. Instead rely exclusively on the privileges of the sender of the socket. Note from Andy: This is exactly Eric's code except for some comment clarifications and formatting fixes. Neither I nor, I think, anyone else is thrilled with this approach, but I'm hesitant to wait on a better fix since 3.15 is almost here. Note to stable maintainers: This is a mess. An earlier series of patches in 3.15 fix a rather serious security issue (CVE-2014-0181), but they did so in a way that breaks Zebra. The offending series includes: commit aa4cf945 Author: Eric W. Biederman <ebiederm@xmission.com> Date: Wed Apr 23 14:28:03 2014 -0700 net: Add variants of capable for use on netlink messages If a given kernel version is missing that series of fixes, it's probably worth backporting it and this patch. if that series is present, then this fix is critical if you care about Zebra. Cc: stable@vger.kernel.org Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: NAndy Lutomirski <luto@amacapital.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Kristian Evensen 提交于
Each iPad model has a different product id, this patch adds support for iPad 2 (pid 0x12a2) and iPad 3 (pid 0x12a6). Note that iPad 2 must be jailbroken and a third-party app must be used for tethering to work. On iPad 3, tethering works out of the box (assuming your ISP is nice). Signed-off-by: NKristian Evensen <kristian.evensen@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
Now it is not possible to set mtu to team device which has a port enslaved to it. The reason is that when team_change_mtu() calls dev_set_mtu() for port device, notificator for NETDEV_PRECHANGEMTU event is called and team_device_event() returns NOTIFY_BAD forbidding the change. So fix this by returning NOTIFY_DONE here in case team is changing mtu in team_change_mtu(). Introduced-by: 3d249d4c "net: introduce ethernet teaming device" Signed-off-by: NJiri Pirko <jiri@resnulli.us> Acked-by: NFlavio Leitner <fbl@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
I noticed we were sending wrong IPv4 ID in TCP flows when MTU discovery is disabled. Note how GSO/TSO packets do not have monotonically incrementing ID. 06:37:41.575531 IP (id 14227, proto: TCP (6), length: 4396) 06:37:41.575534 IP (id 14272, proto: TCP (6), length: 65212) 06:37:41.575544 IP (id 14312, proto: TCP (6), length: 57972) 06:37:41.575678 IP (id 14317, proto: TCP (6), length: 7292) 06:37:41.575683 IP (id 14361, proto: TCP (6), length: 63764) It appears I introduced this bug in linux-3.1. inet_getid() must return the old value of peer->ip_id_count, not the new one. Lets revert this part, and remove the prevention of a null identification field in IPv6 Fragment Extension Header, which is dubious and not even done properly. Fixes: 87c48fa3 ("ipv6: make fragment identifications less predictable") Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Aleksander Morgado 提交于
This interface is unusable, as the cdc-wdm character device doesn't reply to any QMI command. Also, the out-of-tree Sierra Wireless GobiNet driver fully skips it. Signed-off-by: NAleksander Morgado <aleksander@aleksander.es> Acked-by: NBjørn Mork <bjorn@mork.no> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Aleksander Morgado 提交于
A set of new VID/PIDs retrieved from the out-of-tree GobiNet/GobiSerial Sierra Wireless drivers. Signed-off-by: NAleksander Morgado <aleksander@aleksander.es> Acked-by: NBjørn Mork <bjorn@mork.no> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Toshiaki Makita 提交于
br_handle_local_finish() is allowing us to insert an FDB entry with disallowed vlan. For example, when port 1 and 2 are communicating in vlan 10, and even if vlan 10 is disallowed on port 3, port 3 can interfere with their communication by spoofed src mac address with vlan id 10. Note: Even if it is judged that a frame should not be learned, it should not be dropped because it is destined for not forwarding layer but higher layer. See IEEE 802.1Q-2011 8.13.10. Signed-off-by: NToshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Acked-by: NVlad Yasevich <vyasevic@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michal Schmidt 提交于
Any process is able to send netlink messages with leftover bytes. Make the warning rate-limited to prevent too much log spam. The warning is supposed to help find userspace bugs, so print the triggering command name to implicate the buggy program. [v2: Use pr_warn_ratelimited instead of printk_ratelimited.] Signed-off-by: NMichal Schmidt <mschmidt@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 02 6月, 2014 1 次提交
-
-
由 Takashi Iwai 提交于
The conversion to a fixup table for Replacer model with ALC260 in commit 20f7d928 took the wrong widget NID for COEF setups. Namely, NID 0x1a should have been used instead of NID 0x20, which is the common node for all Realtek codecs but ALC260. Fixes: 20f7d928 ('ALSA: hda/realtek - Replace ALC260 model=replacer with the auto-parser') Cc: <stable@vger.kernel.org> [v3.4+] Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-