- 15 10月, 2008 40 次提交
-
-
由 Thomas Bogendoerfer 提交于
This driver replaces the broken ip27-rtc driver in drivers/char and gives back RTC support for SGI IP27 machines. Signed-off-by: NThomas Bogendoerfer <tsbogend@alpha.franken.de> Acked-by: NAlessandro Zummo <alessandro.zummo@towertech.it> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Thomas Bogendoerfer 提交于
This driver replaces the broken DS1286 driver in drivers/char and gives back RTC support for SGI IP22 and IP28 machines. Signed-off-by: NThomas Bogendoerfer <tsbogend@alpha.franken.de> Acked-by: NAlessandro Zummo <alessandro.zummo@towertech.it> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Bjorn Helgaas 提交于
We shouldn't rely on "pnp_platform_devices" to tell us whether there is a PNP RTC device. I introduced "pnp_platform_devices", but I think it was a mistake. All it tells us is whether we found any PNPBIOS or PNPACPI devices. Many machines have some PNP devices, but do not describe the RTC via PNP. On those machines, we need to do the platform driver probe to find the RTC. We should just register the PNP driver and see whether it claims anything. If we don't find a PNP RTC, fall back to the platform driver probe. This (in conjunction with the arch/x86/kernel/rtc.c patch to add a platform RTC device when PNP doesn't have one) should resolve these issues: http://bugzilla.kernel.org/show_bug.cgi?id=11580 https://bugzilla.redhat.com/show_bug.cgi?id=451188Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com> Acked-by: NRafael J. Wysocki <rjw@sisk.pl> Acked-by: NDavid Brownell <dbrownell@users.sourceforge.net> Reported-by: NRik Theys <rik.theys@esat.kuleuven.be> Reported-by: shr_msn@yahoo.com.tw Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Bjorn Helgaas 提交于
Move rtc_wake_setup() from drivers/acpi/glue.c into the RTC driver in drivers/rtc/rtc-cmos.c. This removes the ordering constraint between the module_init(acpi_rtc_init) and the cmos_do_probe() code that depends on it. Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com> Acked-by: NRafael J. Wysocki <rjw@sisk.pl> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jiri Kosina 提交于
Once kernel configuration has CONFIG_HID turned on, let also all the specialized drivers for quirky devices to be built (unless CONFIG_EMBEDDED is specified), as usually users don't care that much which driver gives them the functionality, but when they want generic support, they probably want to have support for all the quirky devices as well. Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Jiri Kosina 提交于
This device is already handled by hid-apple driver, but the blacklist entry was missing in generic driver. Reported-by: NJiri Slaby <jslaby@suse.cz> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Mauro Carvalho Chehab 提交于
This keyboard needs to reset the LEDS during probe. Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Mauro Carvalho Chehab 提交于
Based on an original patch from Alexey Klimov <klimov.linux@gmail.com>, against kernel version 2.6.27. This device is already handled by radio-mr800 driver, and we therefore want usbhid not to touch it. Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Mauro Carvalho Chehab 提交于
This keyboard needs to re-sync numlock after probing. Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 From: Greg Kroah-Hartman 提交于
USB should not be having it's own printk macros, so remove warn() and use the system-wide standard of dev_warn() wherever possible. In the few places that will not work out, use a basic printk(). Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Greg Kroah-Hartman 提交于
USB should not be having it's own printk macros, so remove info() and use the system-wide standard of dev_info() wherever possible. Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Peter Korsgaard 提交于
Similar to the existing IRCONTROL4 handling Signed-off-by: NPeter Korsgaard <jacmet@sunsite.dk> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Anssi Hannula 提交于
Commit 8006479c introduced a spinlock in input_dev->event_lock, which is locked when handling input events. However, the hid-pidff driver sleeps when handling events as it waits for reports being sent to the device before changing the report contents again. This causes a system lockup when trying to use force feedback with a PID device, a regression introduced in 2.6.24 and 2.6.23.15. Fix it by extracting the raw report data from struct hid_report immediately when hid_submit_report() is called, therefore allowing drivers to change the contents of struct hid_report immediately without affecting the already-queued transfer. In hid-pidff, re-add the removed usbhid_wait_io() to pidff_erase_effect() instead, to prevent a full report queue from causing the submission to fail, thus not freeing up device memory. pidff_erase_effect() is not called while dev->event_lock is held. Signed-off-by: NAnssi Hannula <anssi.hannula@gmail.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Jiri Slaby 提交于
Since we have a real device bound to a driver, we may use struct device for printing. Use dev_* functions instead of printks in 4 drivers. Signed-off-by: NJiri Slaby <jirislaby@gmail.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Jiri Slaby 提交于
hid-ff.c now calls only pidff (generic driver), the special ones are now in separate drivers. Invoke pidff on all non-special directly. Signed-off-by: NJiri Slaby <jirislaby@gmail.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Jiri Slaby 提交于
Signed-off-by: NJiri Slaby <jirislaby@gmail.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Jiri Slaby 提交于
Signed-off-by: NJiri Slaby <jirislaby@gmail.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Jiri Slaby 提交于
Move the force feedback processing into a separate module. [jkosina@suse.cz: fix Kconfig texts a little bit] Signed-off-by: NJiri Slaby <jirislaby@gmail.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Jiri Kosina 提交于
The bound check on the buffer length if (count > HID_MIN_BUFFER_SIZE) is of course incorrent, the proper check is if (count > HID_MAX_BUFFER_SIZE) Fix it. Reported-by: NJerry Ryle <jerry@mindtribe.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Jiri Slaby 提交于
hid_compat_load() runs on the default workqueue, it request_module(), it execs modprobe, it exits, tty flushes default workqueue, it hangs, because we are still in it. Signed-off-by: NJiri Slaby <jirislaby@gmail.com> Tested-by: <Valdis.Kletnieks@vt.edu> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Remi Cattiau 提交于
iBuddy devices claim to be HID devices, but they are not. Add them to the blacklist. Signed-off-by: NRemi Cattiau <remi@cattiau.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Tomoya Adachi 提交于
This patch fixes a problem that MacBook JIS keyboard sends wrong report descriptors. Although it has already been fixed in the first Core 2 Duo model, it still remains in other models of MacBook. Signed-off-by: NTomoya Adachi <adachi@il.is.s.u-tokyo.ac.jp> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Randy Dunlap 提交于
Fix config symbol name in ifdef to fix build error: ERROR: "hid_compat_gyration" [drivers/hid/hid-dummy.ko] undefined! Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Acked-by: NJiri Slaby <jirislaby@gmail.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Sergey Belyashov 提交于
Current kernel has no support for autocentering for Logitech wheels. By default autocentering enabled in wheel and constant effect does not work properly. Using USB sniffer I found command which change autocentering settings: 0xFE, 0x0D, 0x0R, 0x0L, 0x80, 0x00, 0x00, where R - clockwise force, L - counter-clockwise (0x0-0xF, 0xC = 100%). Signed-off-by: NSergey Belyashov <Sergey.Belyashov@gmail.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Alex Chiang 提交于
The Kconfig option for HID_COMPAT should read "lose", not "loose". Signed-off-by: NAlex Chiang <achiang@hp.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Jiri Kosina 提交于
This seems to be the very same device, as already supported Smartjoy dual Plus, but with slightly different vendor ID. Let's support this one too. Reported-by: NDavid Ashley <dashxdr@gmail.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Richard Hughes 提交于
This patch reverts the change made four years ago here: http://www.vg.kernel.org/pub/linux/kernel/people/gregkh/usb/2.4/usb-hid-2.4.25-pre7.patch UPS's made by MGE can be used with usbhid just fine, and by removing the ignore quirk allows them to be used with HAL so they just work when plugged in, without needing to be manually configured. With the ignore quirk in place a user would have to configure NUT before the UPS could be used, as NUT uses it's own internal USB matching framework to match against the USB devices, do low level control messages on the device and then parse the HID tables all in userspace. This is not needed, as allowing the device to be claimed as a usbhid device allows it to be used like any other USB UPS device. The devices correctly advertise the power device page which can be queried for the device state. I assume the quirk was changed so that people using < libusb 0.1.8 could still use NUT's internal HID code to manage the UPS. libusb 0.1.8 was released quite some time ago: 2004-02-11. This patch does not break NUT as in drivers/libusb.c the device is force unbound from the kernel driver using usb_detach_kernel_driver_np () where it can be controlled like normal. [jkosina@suse.cz: adapt to the new hidbus code] Signed-off-by: NRichard Hughes <rhughes@redhat.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Jiri Kosina 提交于
Introduce a list of devices for which there is need to force a creation of the hiddev interface, but still they are operated by generic driver (i.e. certain UPS). Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Jiri Slaby 提交于
Merge the logitech force feedback processing directly into logitech driver from the usbhid core. Signed-off-by: NJiri Slaby <jirislaby@gmail.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Jiri Slaby 提交于
Move the handling of the leds resetting from the core to the dell and logitech drivers. Signed-off-by: NJiri Slaby <jirislaby@gmail.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Jiri Slaby 提交于
Move connecting from usbhid to the hid layer and fix also hidp in that manner. This removes all the ignore/force hidinput/hiddev connecting quirks. Signed-off-by: NJiri Slaby <jirislaby@gmail.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Jiri Slaby 提交于
Signed-off-by: NJiri Slaby <jirislaby@gmail.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Jiri Slaby 提交于
Signed-off-by: NJiri Slaby <jirislaby@gmail.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Jiri Slaby 提交于
Remove support for both dynamic and static report descriptor quirks. There is no longer rdesc code which it would support, so it's useless. Signed-off-by: NJiri Slaby <jirislaby@gmail.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Jiri Slaby 提交于
Remove the file since these is no user now. Signed-off-by: NJiri Slaby <jirislaby@gmail.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Jiri Slaby 提交于
Signed-off-by: NJiri Slaby <jirislaby@gmail.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Jiri Slaby 提交于
Signed-off-by: NJiri Slaby <jirislaby@gmail.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Jiri Slaby 提交于
Signed-off-by: NJiri Slaby <jirislaby@gmail.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Jiri Slaby 提交于
Signed-off-by: NJiri Slaby <jirislaby@gmail.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Jiri Slaby 提交于
Signed-off-by: NJiri Slaby <jirislaby@gmail.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-