- 11 9月, 2009 3 次提交
-
-
由 Hendrik Brueckner 提交于
If a named saved system (NSS) cannot be defined or saved, print out an error message with the return code of the underlying z/VM CP command. Signed-off-by: NHendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Heiko Carstens 提交于
Eleminate the local variable machine_flags and always change machine flags directly in the lowcore. This avoids confusion about when and why the two variables have to be synchronized. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Hendrik Brueckner 提交于
Append scpdata to the kernel boot command line. If scpdata starts with the equal sign (=), the kernel boot command line is replaced. (For consistency with zIPL and IPL PARM parameters.) To use scpdata for the kernel boot command line, scpdata must consist of ascii characters only. If scpdata contains other characters, scpdata is not appended to the kernel boot command line. In addition, re-IPL is extended for setting scpdata for the next Linux reboot. Signed-off-by: NHendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 07 8月, 2009 1 次提交
-
-
由 Hendrik Brueckner 提交于
Currently, the machine_flags are stored late in the startup initialization which results in failing machine type checks (e.g. for MACHINE_IS_VM). To allow these checks, store the machine flags in the lowcore when the machine type has been detected. Moving the machine_flags to the lowcore has been introduced with git commit 25097bf1Signed-off-by: NHendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 24 7月, 2009 1 次提交
-
-
由 Heiko Carstens 提交于
Our swsusp_arch_suspend() backend implementation disables prefixing by setting the contents of the prefix register to 0. However afterwards common code functions are called which might access percpu data structures. Since the lowcore contains e.g. the percpu base pointer this isn't a good idea. So fix this by copying the hibernating cpu's lowcore to absolute address zero. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 16 6月, 2009 1 次提交
-
-
由 Hans-Joachim Picht 提交于
This patch introduces the hibernation backend support to the s390 architecture. Now it is possible to suspend a mainframe Linux guest using the following command: echo disk > /sys/power/state Signed-off-by: NHans-Joachim Picht <hans@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 12 6月, 2009 1 次提交
-
-
由 Heiko Carstens 提交于
Dynamic ftrace support for s390. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 14 4月, 2009 2 次提交
-
-
由 Martin Schwidefsky 提交于
Add a read_persistent_clock function that does not just return 0. Since timekeeping_init calls the function before time_init has been called move reset_tod_clock to early.c to make sure that the TOD clock is running when read_persistent_clock is invoked. Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Christian Ehrhardt 提交于
Currently the storage of the machine flags is a globally exported unsigned long long variable. By moving the storage location into the lowcore struct we allow assembler code to check machine_flags directly even without needing a register. Addtionally the lowcore and therefore the machine flags too will be in cache most of the time. Signed-off-by: NChristian Ehrhardt <ehrhardt@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 26 3月, 2009 2 次提交
-
-
由 Hendrik Brueckner 提交于
strlcpy() does already NUL-terminate the destination string. Signed-off-by: NHendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Christian Borntraeger 提交于
Currently we use the cpuid (via STIDP instruction) to recognize LPAR, z/VM and KVM. The architecture states, that bit 0-7 of STIDP returns all zero, and if STIDP is executed in a virtual machine, the VM operating system will replace bits 0-7 with FF. KVM should not use FE to distinguish z/VM from KVM for interested guests. The proper way to detect the hypervisor is the STSI (Store System Information) instruction, which return information about the hypervisors via function code 3, selector1=2, selector2=2. This patch changes the detection routine of Linux to use STSI instead of STIDP. This detection is earlier than bootmem, we have to use a static buffer. Since STSI expects a 4kb block (4kb aligned) this patch also changes the init.data alignment for s390. As this section will be freed during boot, this should be no problem. Patch is tested with LPAR, z/VM, KVM on LPAR, and KVM under z/VM. Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 14 7月, 2008 4 次提交
-
-
由 Heiko Carstens 提交于
Most likely it is broken anyway because of the changes in memory detection. Since we can't test it and there are probably better ways that using a P390 card, remove support for it. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Heiko Carstens 提交于
Move memory detection code to own file and also simplify it. Also add an interface which can be called at any time to get the current memory layout. This interface is needed by our kernel internal system dumper. Cc: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Cc: Michael Holzheu <holzheu@de.ibm.com> Cc: Frank Munzert <munzert@de.ibm.com> Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Hendrik Brueckner 提交于
Now it is possible to specify additional kernel parameters on the IPL command line using the IPL PARM option. If the Linux system is already running, the new reipl sysfs attribute 'parm' can be used to change kernel parameters for the next reboot. Examples: IPL C PARM dasd=1234 root=/dev/dasda1 IPL 1234 PARM savesys=mylnxnss echo "init=/bin/bash" > /sys/firmware/reipl/ccw/parm Signed-off-by: NHendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
-
由 Heiko Carstens 提交于
In case the initrd is located within the bss section it will be overwritten when the section is cleared. To prevent this just move the initrd right behind the bss section if it starts within the section. The current code already moves the initrd if the bootmem allocator bitmap would overwrite it. With this patch we should be safe against initrd corruptions. Cc: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 30 4月, 2008 2 次提交
-
-
由 Gerald Schaefer 提交于
This adds hugetlbfs support on System z, using both hardware large page support if available and software large page emulation on older hardware. Shared (large) page tables are implemented in software emulation mode, by using page->index of the first tail page from a compound large page to store page table information. Signed-off-by: NGerald Schaefer <geraldsc@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Heiko Carstens 提交于
From: Heiko Carstens <heiko.carstens@de.ibm.com> From: Carsten Otte <cotte@de.ibm.com> This lets us use defines for the magic bits in machine flags instead of using plain numbers all over the place. In addition on newer machines features/facilities are indicated by the result of the stfl instruction. So we use these bits instead of trying to execute new instructions and check wether we get an exception or not. Also the mvpg instruction is always available when in zArch mode, whereas the idte instruction is only available in zArch mode. This results in some minor optimizations. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NCarsten Otte <cotte@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 27 4月, 2008 1 次提交
-
-
由 Carsten Otte 提交于
This patch adds functionality to detect if the kernel runs under the KVM hypervisor. A macro MACHINE_IS_KVM is exported for device drivers. This allows drivers to skip device detection if the systems runs non-virtualized. We also define a preferred console to avoid having the ttyS0, which is a line mode only console. Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com> Acked-by: NMartin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: NCarsten Otte <cotte@de.ibm.com> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
- 17 4月, 2008 1 次提交
-
-
由 Heiko Carstens 提交于
Most noteable part of this commit is the new local header file entry.h which contains all the function declarations of functions that get only called from asm code or are arch internal. That way we can avoid extern declarations in C files. This is more or less the same that was done for sparc64. Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
-
- 05 3月, 2008 1 次提交
-
-
由 Hongjie Yang 提交于
/sys/firmware/reipl/nss/name contains the nss name when defsys or savesys command has been executed. If the defsys or savesys command fails the kernel_nss_name has to be cleared since a reipl on that nss name won't be possible. Signed-off-by: NHongjie Yang <hongjie@us.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 26 1月, 2008 2 次提交
-
-
由 Heiko Carstens 提交于
It caused only a lot of confusion. From now on cpu hotplug of up to NR_CPUS will work by default. If somebody wants to limit that then the possible_cpus parameter can be used. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Heiko Carstens 提交于
Add a new interface so that cpus can be put into standby state and configured state. Only offline cpus can be put into standby state or configured state. For that the new percpu sysfs attribute "configure" must be used. To put a cpu in standby state a "0" must be written to the attribute. In order to switch it into configured state a "1" must be written to the attribute. Only cpus in configured state can be brought online. In addition this patch introduces a static mapping of physical to logical cpus. As a result only the sysfs directories of present cpus will be created. To scan for new cpus the new sysfs attribute "rescan" must be used. Writing to /sys/devices/system/cpu/rescan will trigger a rescan of cpus and will create directories for new cpus. On IPL only configured cpus will be used. And on reboot/shutdown all cpus will remain in their current state (configured/standby). Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 20 11月, 2007 1 次提交
-
-
由 Heiko Carstens 提交于
Before we're getting short on memory detection fixes here is the next one: if neither sclp nor diag260 report the storage size the detection loop will return immediately without detecting anything. Fix this by breaking the detection loop only if the memory end is known. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 05 11月, 2007 1 次提交
-
-
由 Heiko Carstens 提交于
Yet another patch in the countless series of memory detection fixes: if the last area of the reported storage size is a hole the detection loop will loop forever. Just break chunk detection loop if its end is going to be larger than reported storage size. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 10 7月, 2007 2 次提交
-
-
由 Heiko Carstens 提交于
Check if a command is available before executing. Saves some superfluous service calls that won't succeed anyway. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Heiko Carstens 提交于
Introduce some new interfaces so that random subsystems don't have to mess around with sclp internal structures. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 27 4月, 2007 1 次提交
-
-
由 Heiko Carstens 提交于
If both sclp and diag memory detection don't work stop at the first memory hole. Otherwise the code might loop forever... Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
-
- 19 3月, 2007 1 次提交
-
-
由 Heiko Carstens 提交于
diag 260 returns the address of the last addressable byte and not the size of memory. Since we want the size we have to add 1 to the return value. Disable diag 260 for non z/Arch mode since it doesn't work there anyway. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 21 2月, 2007 3 次提交
-
-
由 Heiko Carstens 提交于
Clear only memory from __bss_start to __bss_stop when clearing the bss section. Not until _end, which currently happens to be the same. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Michael Holzheu 提交于
Setup.h has been misused for ipl related stuff in the past. We now move everything, which has to do with ipl and reipl to a new header file named "ipl.h". Signed-off-by: NMichael Holzheu <holzheu@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Michael Holzheu 提交于
Replace two stidp inline assemblies with one global implementation. Signed-off-by: NMichael Holzheu <holzheu@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 06 2月, 2007 2 次提交
-
-
由 Heiko Carstens 提交于
Set read-only flag in the page table entries for the kernel image text section. This will catch all instruction caused corruptions withing the text section. Instruction replacement via kprobes still works, since it bypasses now dynamic address translation. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Heiko Carstens 提交于
Hopefully this will make it more maintainable and less error prone. Code makes use of search_exception_tables(). Since it calls this function before the kernel exeception table is sorted, there is an early call to sort_main_extable(). This way it's easy to use the already present infrastructure of fixup sections. Also this would allows to easily convert the rest of head[31|64].S into C code. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-