Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NDavid S. Miller <davem@davemloft.net>

        This patch fixes the multicast group matching for 
IP_DROP_MEMBERSHIP, similar to the IP_ADD_MEMBERSHIP fix in a prior
patch. Groups are identifiedby <group address,interface> and including
the interface address in the match will fail if a leave-group is done
by address when the join was done by index, or if different addresses
on the same interface are used in the join and leave.
Signed-off-by: NDavid L Stevens <dlstevens@us.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

1) Adds (INCLUDE, empty)/leave-group equivalence to the full-state 
   multicast source filter APIs (IPv4 and IPv6)

2) Fixes an incorrect errno in the IPv6 leave-group (ENOENT should be
   EADDRNOTAVAIL)
Signed-off-by: NDavid L Stevens <dlstevens@us.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

1) In the full-state API when imsf_numsrc == 0
   errno should be "0", but returns EADDRNOTAVAIL

2) An illegal filter mode change
   errno should be EINVAL, but returns EADDRNOTAVAIL

3) Trying to do an any-source option without IP_ADD_MEMBERSHIP
   errno should be EINVAL, but returns EADDRNOTAVAIL

4) Adds comments for the less obvious error return values
Signed-off-by: NDavid L Stevens <dlstevens@us.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

1) Changes IP_ADD_SOURCE_MEMBERSHIP and MCAST_JOIN_SOURCE_GROUP to ignore
   EADDRINUSE errors on a "courtesy join" -- prior membership or not
   is ok for these.

2) Adds "leave group" equivalence of (INCLUDE, empty) filters in the 
   delta-based API. Without this, mixing delta-based API calls that
   end in an (INCLUDE, empty) filter would not allow a subsequent
   regular IP_ADD_MEMBERSHIP. It also frees socket buffer memory that
   isn't needed for both the multicast group record and source filter.
Signed-off-by: NDavid L Stevens <dlstevens@us.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

        This patch corrects a few problems with the IP_ADD_MEMBERSHIP
socket option:

1) The existing code makes an attempt at reference counting joins when
   using the ip_mreqn/imr_ifindex interface. Joining the same group
   on the same socket is an error, whatever the API. This leads to
   unexpected results when mixing ip_mreqn by index with ip_mreqn by
   address, ip_mreq, or other API's. For example, ip_mreq followed by
   ip_mreqn of the same group will "work" while the same two reversed
   will not.
           Fixed to always return EADDRINUSE on a duplicate join and
   removed the (now unused) reference count in ip_mc_socklist.

2) The group-search list in ip_mc_join_group() is comparing a full 
   ip_mreqn structure and all of it must match for it to find the
   group. This doesn't correctly match a group that was joined with
   ip_mreq or ip_mreqn with an address (with or without an index). It
   also doesn't match groups that are joined by different addresses on
   the same interface. All of these are the same multicast group,
   which is identified by group address and interface index.
           Fixed the check to correctly match groups so we don't get
   duplicate group entries on the ip_mc_socklist.

3) The old code allocates a multicast address before searching for
   duplicates requiring it to free in various error cases. This
   patch moves the allocate until after the search and
   igmp_max_memberships check, so never a need to allocate, then free
   an entry.
Signed-off-by: NDavid L Stevens <dlstevens@us.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This was the full intention of the original code.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NDavid S. Miller <davem@davemloft.net>

From: Victor Fusco <victor@cetuc.puc-rio.br>

Fix the sparse warning "implicit cast to nocast type"
Signed-off-by: NVictor Fusco <victor@cetuc.puc-rio.br>
Signed-off-by: NDomen Puncer <domen@coderock.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This is part of the grand scheme to eliminate the qlen
member of skb_queue_head, and subsequently remove the
'list' member of sk_buff.

Most users of skb_queue_len() want to know if the queue is
empty or not, and that's trivially done with skb_queue_empty()
which doesn't use the skb_queue_head->qlen member and instead
uses the queue list emptyness as the test.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Noticed by Eddie C. Dost
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

I've been asked about this a couple times, and there's no info in
MAINTAINERS file.  Add MAINTAINERS entry for audit subsystem.
Signed-off-by: NChris Wright <chrisw@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Set the target's split_io field when building a dm-mirror device so
incoming bios won't span the mirror's internal regions.  Without this,
regions can be accessed while not holding correct locks and data corruption
is possible.
Reported-By: N"Zhao Qian" <zhaoqian@aaastor.com>
From: Kevin Corry <kevcorry@us.ibm.com>
Signed-Off-By: NAlasdair G Kergon <agk@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

One more system where video works with S3.
Signed-off-by: NPavel Machek <pavel@suse.cz>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch is for supporting Epson s1d13xxx framebuffer device for m32r.  #
Sorry, a little bigger.

The Epson s1d13806 is already supported by 2.6.12 kernel, and its driver is
placed as drivers/video/s1d13xxxfb.c.

For the m32r, a header file include/asm-m32r/s1d13806.h was prepared for
several m32r target platforms.  It was originally generated by an Epson
tool S1D13806CFG.EXE, and modified manually for the m32r platforms.
Signed-off-by: NHayato Fujiwara <fujiwara@linux-m32r.org>
Signed-off-by: NHirokazu Takata <takata@linux-m32r.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

After discussion at the recent NFSv4 bake-a-thon, I realized that my
assumption that NFS4_FH_PERSISTENT required filehandles to persist was a
misreading of the spec.  This also fixes an interoperability problem with the
Solaris client.
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: NNeil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

We shouldn't be allowing, e.g., write locks on files not open for read.  To
enforce this, we add a pointer from the lock stateid back to the open stateid
it came from, so that the check will continue to be correct even after the
open is upgraded or downgraded.
Signed-off-by: NAndy Adamson <andros@citi.umich.edu>
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: NNeil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

As long as we're here, do some miscellaneous cleanup.
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: NNeil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The handling of close_lru in preprocess_stateid_op was a source of some
confusion here recently.  Try to make the logic a little clearer, by renaming
find_openstateowner_id to make its purpose clearer and untangling some
unnecessarily complicated goto's.
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: NNeil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

nfs4_preprocess_seqid_op is called by NFSv4 operations that imply an implicit
renewal of the client lease.
Signed-off-by: NAndy Adamson <andros@citi.umich.edu>
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: NNeil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

from RFC 3530:
"Share reservations are established by OPEN operations and by their
nature are mandatory in that when the OPEN denies READ or WRITE
operations, that denial results in such operations being rejected
with error NFS4ERR_LOCKED."

(Note that share_denied is really only a legal error for OPEN.)
Signed-off-by: NAndy Adamson <andros@citi.umich.edu>
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: NNeil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

An OPEN from the same client/open stateowner requires a stateid update because
of the share/deny access update.
Signed-off-by: NAndy Adamson <andros@citi.umich.edu>
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: NNeil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

We're insisting that the lock sequence id field passed in the
open_to_lockowner struct always be zero.  This is probably thanks to the
sentence in rfc3530: "The first request issued for any given lock_owner is
issued with a sequence number of zero."

But there doesn't seem to be any problem with allowing initial sequence
numbers other than zero.  And currently this is causing lock reclaims from the
Linux client to fail.

In the spirit of "be liberal in what you accept, conservative in what you
send", we'll relax the check (and patch the Linux client as well).
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: NNeil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add some comments on the use of so_seqid, in an attempt to avoid some of the
confusion outlined in the previous patch....
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: NNeil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The sequence number we store in the sequence id is the last one we received
from the client.  So on the next operation we'll check that the client gives
us the next higher number.

We increment sequence id's at the last moment, in encode, so that we're sure
of knowing the right error return.  (The decision to increment the sequence id
depends on the exact error returned.)

However on the *first* use of a sequence number, if we set the sequence number
to the one received from the client and then let the increment happen on
encode, we'll be left with a sequence number one to high.

For that reason, ENCODE_SEQID_OP_TAIL only increments the sequence id on
*confirmed* stateowners.

This creates a problem for open reclaims, which are confirmed on first use.
Therefore the open reclaim code, as a special exception, *decrements* the
sequence id, cancelling out the undesired increment on encode.  But this
prevents the sequence id from ever being incremented in the case where
multiple reclaims are sent with the same openowner.  Yuch!

We could add another exception to the open reclaim code, decrementing the
sequence id only if this is the first use of the open owner.

But it's simpler by far to modify the meaning of the op_seqid field: instead
of representing the previous value sent by the client, we take op_seqid, after
encoding, to represent the *next* sequence id that we expect from the client.
This eliminates the need for special-case handling of the first use of a
stateowner.
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: NNeil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Yeah, it's trivial, but this drives me up the wall....
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: NNeil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

A misreading of the spec lead us to convert all errors on open and lock
reclaims to RECLAIM_BAD.  This causes problems--for example, a reboot within
the grace period could lead to reclaims with stale stateid's, and we'd like to
return STALE errors in those cases.

What rfc3530 actually says about RECLAIM_BAD: "The reclaim provided by the
client does not match any of the server's state consistency checks and is
bad." I'm assuming that "state consistency checks" refers to checks for
consistency with the state recorded to stable storage, and that the error
should be reserved for that case.
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: NNeil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

A GRACE or NOGRACE response to a lock request should also bump the sequence
id.  So we delay the handling of grace period errors till after we've found
the relevant owner.
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: NNeil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The GRACE and NOGRACE errors should bump the sequence id on open.  So we delay
the handling of these errors until nfsd4_process_open2, at which point we've
set the open owner, so the encode routine will be able to bump the sequence
id.
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: NNeil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

We oops in list_for_each_entry(), because release_stateowner frees something
on the list we're traversing.
Signed-off-by: NAndy Adamson <andros@citi.umich.edu>
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: NNeil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Make sure we don't try to delete client recovery directories multiple times;
fixes some spurious error messages.
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: NNeil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Oops, this lookup_one_len needs the i_sem.
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: NNeil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

We need to fsync the recovery directory after writing to it, but we weren't
doing this correctly.  (For example, we weren't taking the i_sem when calling
->fsync().)

Just reuse the existing nfsd fsync code instead.
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: NNeil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

We need to remove the recovery directory here too.  (This chunk just got lost
somehow in the process of commuting the reboot recovery patches past the other
patches.)
Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: NNeil Brown <neilb@cse.unsw.edu.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

As a follow-up, we can allow the yenta-driver to be limited to PCMCIA
operation.
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

If probing for the correct interrupt fails on yenta bridges, the driver falls
back to polling for interrupt actions.  However, CardBus cards cannot be used
then.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: NDominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>