- 20 6月, 2006 40 次提交
-
-
由 David S. Miller 提交于
This ugly hack was long overdue to die. It was a way to print out Sparc interrupts in a more freindly format, since IRQ numbers were arbitrary opaque 32-bit integers which vectored into PIL levels. These 32-bit integers were not necessarily in the 0-->NR_IRQS range, but the PILs they vectored to were. The idea now is that we will increase NR_IRQS a little bit and use a virtual<-->real IRQ number mapping scheme similar to PowerPC. That makes this IRQ printing hack irrelevant, and furthermore only a handful of drivers actually used __irq_itoa() making it even less useful. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Only pil0_dummy_bucket had a pil of zero and we just killed that off, so we can delete all special case code that used bp->pil==0 as a way to identify a dummy bucket. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
This is the first in a series of cleanups that will hopefully allow a seamless attempt at using the generic IRQ handling infrastructure in the Linux kernel. Define PIL_DEVICE_IRQ and vector all device interrupts through there. Get rid of the ugly pil0_dummy_{bucket,desc}, instead vector the timer interrupt directly to a specific handler since the timer interrupt is the only event that will be signaled on PIL 14. The irq_worklist is now in the per-cpu trap_block[]. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Bob Breuer 提交于
Fix the calculation of the end address when flushing iotlb entries to ram. This bug has been a cause of esp dma errors, and it affects HyperSPARC systems much worse than SuperSPARC systems. Signed-off-by: NBob Breuer <breuerr@mc.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Bob Breuer 提交于
Fix the smp related section mismatch warnings by marking the smp init functions as cpuinit. Signed-off-by: NBob Breuer <breuerr@mc.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Bob Breuer 提交于
Fix a link failure by adding the missing can_lock macros for the rw locks. Signed-off-by: NBob Breuer <breuerr@mc.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Bob Breuer 提交于
Setup cpu_possible_map so the secondary cpus will get started. Signed-off-by: NBob Breuer <breuerr@mc.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Bob Breuer 提交于
Fix a crash in SMP mode by adding the missing topology_init. Also makes /proc/cpuinfo backwards compatible with 2.4. Signed-off-by: NBob Breuer <breuerr@mc.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://ftp.linux-mips.org/pub/scm/upstream-linus由 Linus Torvalds 提交于
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (51 commits) [MIPS] Make timer interrupt frequency configurable from kconfig. [MIPS] Correct HAL2 Kconfig description [MIPS] Fix R4K cache macro names [MIPS] Add Missing R4K Cache Macros to IP27 & IP32 [MIPS] Support for the RM9000-based Basler eXcite smart camera platform. [MIPS] Support for the R5500-based NEC EMMA2RH Mark-eins board [MIPS] Support SNI RM200C SNI in big endian mode and R5000 processors. [MIPS] SN: include asm/sn/types.h for nasid_t. [MIPS] Random fixes for sb1250 [MIPS] Fix bcm1480 compile [MIPS] Remove support for NEC DDB5476. [MIPS] Remove support for NEC DDB5074. [MIPS] Cleanup memory managment initialization. [MIPS] SN: Declare bridge_pci_ops. [MIPS] Remove unused function alloc_pci_controller. [MIPS] IP27: Extract pci_ops into separate file. [MIPS] IP27: Use symbolic constants instead of magic numbers. [MIPS] vr41xx: remove unnecessay items from vr41xx/Kconfig. [MIPS] IP27: Cleanup N/M mode configuration. [MIPS] IP27: Throw away old unused hacks. ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (46 commits) IB/uverbs: Don't serialize with ib_uverbs_idr_mutex IB/mthca: Make all device methods truly reentrant IB/mthca: Fix memory leak on modify_qp error paths IB/uverbs: Factor out common idr code IB/uverbs: Don't decrement usecnt on error paths IB/uverbs: Release lock on error path IB/cm: Use address handle helpers IB/sa: Add ib_init_ah_from_path() IB: Add ib_init_ah_from_wc() IB/ucm: Get rid of duplicate P_Key parameter IB/srp: Factor out common request reset code IB/srp: Support SRP rev. 10 targets [SCSI] srp.h: Add I/O Class values IB/fmr: Use device's max_map_map_per_fmr attribute in FMR pool. IB/mthca: Fill in max_map_per_fmr device attribute IB/ipath: Add client reregister event generation IB/mthca: Add client reregister event generation IB: Move struct port_info from ipath to <rdma/ib_smi.h> IPoIB: Handle client reregister events IB: Add client reregister event type ...
-
由 Linus Torvalds 提交于
* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: (109 commits) [ETHTOOL]: Fix UFO typo [SCTP]: Fix persistent slowdown in sctp when a gap ack consumes rx buffer. [SCTP]: Send only 1 window update SACK per message. [SCTP]: Don't do CRC32C checksum over loopback. [SCTP] Reset rtt_in_progress for the chunk when processing its sack. [SCTP]: Reject sctp packets with broadcast addresses. [SCTP]: Limit association max_retrans setting in setsockopt. [PFKEYV2]: Fix inconsistent typing in struct sadb_x_kmprivate. [IPV6]: Sum real space for RTAs. [IRDA]: Use put_unaligned() in irlmp_do_discovery(). [BRIDGE]: Add support for NETIF_F_HW_CSUM devices [NET]: Add NETIF_F_GEN_CSUM and NETIF_F_ALL_CSUM [TG3]: Convert to non-LLTX [TG3]: Remove unnecessary tx_lock [TCP]: Add tcp_slow_start_after_idle sysctl. [BNX2]: Update version and reldate [BNX2]: Use CPU native page size [BNX2]: Use compressed firmware [BNX2]: Add firmware decompression [BNX2]: Allow WoL settings on new 5708 chips ... Manual fixup for conflict in drivers/net/tulip/winbond-840.c
-
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/intelfb-2.6由 Linus Torvalds 提交于
* 'i915fb' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/intelfb-2.6: (25 commits) intelfb: fixup clock calculation debugging. Removed hard coded EDID buffer size. intelfb: use regular modedb table instead of VESA intelfb: use firmware EDID for mode database Revert "intelfb driver -- use the regular modedb table instead of the VESA" intelfb: int option fix sync modesetting code with X.org intelfb: align with changes from my X driver. intelfb driver -- use the regular modedb table instead of the VESA Adds support for 256MB aperture on 945 chipsets to the intelfb driver intelfb -- uses stride alignment of 64 on the 9xx chipsets. intelfb: some cleanups for intelfbhw intelfb: fixup pitch calculation like X does intelfb: fixup p calculation This patch makes a needlessly global struct static. intelfb: add i945GM support intelfb: fixup whitespace.. intelfb: add hw cursor support for i9xx intelfb: make i915 modeset intelfb: add support for i945G ...
-
由 Linus Torvalds 提交于
* master.kernel.org:/pub/scm/linux/kernel/git/davej/agpgart: [AGPGART] alpha-agp warning fix [AGPGART] uninorth-agp warning fixes [AGPGART] Remove pointless initialisation in intel-agp [AGPGART] Remove pointless code from agp_generic_create_gatt_table()
-
由 Linus Torvalds 提交于
* master.kernel.org:/pub/scm/linux/kernel/git/davej/cpufreq: [CPUFREQ] sets nforce2 minimum PLL divider to 2. [CPUFREQ] Make powernow-k7 work on SMP kernels. [CPUFREQ] cpufreq core {d,}printk adjustments [CPUFREQ] dprintk adjustments to cpufreq-speedstep-centrino [CPUFREQ] dprintk adjustments to cpufreq-nforce2 [CPUFREQ] Prepare powernow-k8 for future CPUs. [CPUFREQ] Make acpi-cpufreq 'sticky'. [CPUFREQ] Remove strange No-op from longrun.c [CPUFREQ] Remove more freq_table reinitialisations. [CPUFREQ] Fix another redundant initialisation in freq_table [CPUFREQ] Remove duplicate assignment in freq_table [CPUFREQ] CodingStyle nits in cpufreq_stats.c [CPUFREQ] Remove duplicate assignment from cpufreq-nforce2 [CPUFREQ] Remove pointless reinitialisations in acpi-cpufreq [CPUFREQ] Remove pointless reinitialisation from powernow-k8 [CPUFREQ] Remove redundant initialisation from longhaul. [CPUFREQ] Clean up longhaul's speed pretty-printer [CPUFREQ] Disambiguate loop indexes in powernow-k7 [CPUFREQ] Typo in powernow-k8
-
由 Linus Torvalds 提交于
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: (166 commits) [PATCH] net: au1000_eth: PHY framework conversion [PATCH] 3c5zz ethernet: fix section warnings [PATCH] smc ethernet: fix section mismatch warnings [PATCH] hp ethernet: fix section mismatches [PATCH] Section mismatch in drivers/net/ne.o during modpost [PATCH] e1000: prevent statistics from getting garbled during reset [PATCH] smc911x Kconfig fix [PATCH] forcedeth: new device ids [PATCH] forcedeth config: version [PATCH] forcedeth config: module parameters [PATCH] forcedeth config: diagnostics [PATCH] forcedeth config: move functions [PATCH] forcedeth config: statistics [PATCH] forcedeth config: csum [PATCH] forcedeth config: wol [PATCH] forcedeth config: phy [PATCH] forcedeth config: flow control [PATCH] forcedeth config: ring sizes [PATCH] forcedeth config: tso cleanup [DOC] Update bonding documentation with sysfs info ...
-
由 Linus Torvalds 提交于
Trying to suspend/resume with console messages flying all around is doomed to failure, when the devices that the messages are trying to go to are being shut down. Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Linus Torvalds 提交于
According to the ACPI spec, it should be enabled on return from suspend, but bugs happen. Apparently especially on the Apple Intel Macs. Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Linus Torvalds 提交于
Doing a full ata_busy_sleep() seems to get suspend and resume working fine on the Apple Mac Mini, at least. Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Atsushi Nemoto 提交于
Make HZ configurable. DECSTATION can select 128/256/1024 HZ, JAZZ can only select 100 HZ, others can select 100/128/250/256/1000/1024 HZ if not explicitly specified). Also remove all mach-xxx/param.h files and update all defconfigs according to current HZ value. Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Kumba 提交于
The current HAL2 Kconfig description indicates it is only used on SGI Indy systems, however all members of the Indigo2 Family have this sound card as well. Plus a minor grammatical fix is included. Signed-off-by: NJoshua Kinard <kumba@gentoo.org> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Kumba 提交于
Several machines have the R4K cache macro name spelled incorrectly. Namely, they have cpu_has_4kcache defined instead of cpu_has_4k_cache. Signed-off-by: NJoshua Kinard <kumba@gentoo.org> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Kumba 提交于
Keeping in accordance with other machines, IP27 and IP32 lack a few macros. IP27 lacks cpu_has_4kex & cpu_has_4k_cache macros while IP32 lacks just the cpu_has_4k_cache macro. Signed-off-by: NJoshua Kinard <kumba@gentoo.org> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Signed-off-by: NThomas Koeller <thomas.koeller@baslerweb.com> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 dmitry pervushin 提交于
Signed-off-by: Ndmitry pervushin <dpervushin@ru.mvista.com> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Thomas Bogendoerfer 提交于
Added support for RM200C machines with big endian firmware Added support for RM200-C40 (R5000 support) Signed-off-by: NFlorian Lohoff <flo@rfc822.org> Signed-off-by: NThomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Thiemo Seufer 提交于
Random improvements for sb1250: Silence compiler warnings, a bugfix for the profiling code, and a comment typo. Signed-off-by: NThiemo Seufer <ths@networkno.de> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Thiemo Seufer 提交于
Fix compilation for bcm1480, a hpt is only available on sb1250/bcm112x. Signed-off-by: NThiemo Seufer <ths@networkno.de> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
As warned several times before. Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
As warned several times before. Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Historically plat_mem_setup did the entire platform initialization. This was rather impractical because it meant plat_mem_setup had to get away without any kind of memory allocator. To keep old code from breaking plat_setup was just renamed to plat_setup and a second platform initialization hook for anything else was introduced. Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Yoichi Yuasa 提交于
Remove unnecessary items from vr41xx/Kconfig. SYS_HA_CPU_VR41XX has already been selected by MACH_VR41XX. Signed-off-by: NYoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
kern_addr_valid is currently only being used in kmem_ptr_validate which is making some vague attempt at verfying the validity of an address. Only IA-64, PARISC and x86-64 actually make some actual effort to verify the validity of the pointer. Most architecture definitions of kern_addr_valid() just define it as 1; the Alpha and CONFIG_DISCONTIGMEM on i386 and MIPS even as 0; the 0-definition will result in kmem_ptr_validate always failing which in turn will cause d_validate to always fail. d_validate's only two users are smbfs and ncpfs, so the 0 definition ended breaking those ... Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-