- 13 9月, 2005 3 次提交
-
-
由 Ralf Baechle 提交于
Misc related cleanups in hamradio drivers: o Use symbolic constants instead of magic numbers o Don't try to handle the case where AX.25 isn't configured - the kernel configuration doesn't permit that. o Remove useless headers Signed-off-by: NRalf Baechle DL5RB <ralf@linux-mips.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnaldo Carvalho de Melo 提交于
Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nishanth Aravamudan 提交于
Use schedule_timeout_{,un}interruptible() instead of set_current_state()/schedule_timeout() to reduce kernel size. Also use human-time conversion functions instead of hard-coded division to avoid rounding issues. Signed-off-by: NNishanth Aravamudan <nacc@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 12 9月, 2005 19 次提交
-
-
由 Evgeniy Polyakov 提交于
Kernel connector - new userspace <-> kernel space easy to use communication module which implements easy to use bidirectional message bus using netlink as it's backend. Connector was created to eliminate complex skb handling both in send and receive message bus direction. Connector driver adds possibility to connect various agents using as one of it's backends netlink based network. One must register callback and identifier. When driver receives special netlink message with appropriate identifier, appropriate callback will be called. From the userspace point of view it's quite straightforward: socket(); bind(); send(); recv(); But if kernelspace want to use full power of such connections, driver writer must create special sockets, must know about struct sk_buff handling... Connector allows any kernelspace agents to use netlink based networking for inter-process communication in a significantly easier way: int cn_add_callback(struct cb_id *id, char *name, void (*callback) (void *)); void cn_netlink_send(struct cn_msg *msg, u32 __groups, int gfp_mask); struct cb_id { __u32 idx; __u32 val; }; idx and val are unique identifiers which must be registered in connector.h for in-kernel usage. void (*callback) (void *) - is a callback function which will be called when message with above idx.val will be received by connector core. Using connector completely hides low-level transport layer from it's users. Connector uses new netlink ability to have many groups in one socket. [ Incorporating many cleanups and fixes by myself and Andrew Morton -DaveM ] Signed-off-by: NEvgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Linus Torvalds 提交于
-
由 Tony Luck 提交于
-
由 Tony Luck 提交于
-
由 Keith Owens 提交于
Delete the special case unwind code that was only used by the old MCA/INIT handler. Signed-off-by: NKeith Owens <kaos@sgi.com> Signed-off-by: NTony Luck <tony.luck@intel.com>
-
由 Keith Owens 提交于
Remove the physical mode path from minstate.h. Signed-off-by: NKeith Owens <kaos@sgi.com> Signed-off-by: NTony Luck <tony.luck@intel.com>
-
由 Keith Owens 提交于
The bulk of the change. Use per cpu MCA/INIT stacks. Change the SAL to OS state (sos) to be per process. Do all the assembler work on the MCA/INIT stacks, leaving the original stack alone. Pass per cpu state data to the C handlers for MCA and INIT, which also means changing the mca_drv interfaces slightly. Lots of verification on whether the original stack is usable before converting it to a sleeping process. Signed-off-by: NKeith Owens <kaos@sgi.com> Signed-off-by: NTony Luck <tony.luck@intel.com>
-
由 Keith Owens 提交于
Reading the INIT record from SAL during the INIT event has proved to be unreliable, and a source of hangs during INIT processing. The new MCA/INIT handlers remove the need to get the INIT record from SAL. Change salinfo.c so mca.c can just flag that a new record is available, without having to read the record during INIT processing. This patch can be applied without the new MCA/INIT handlers. Also clean up some usage of NR_CPUS which should have been using cpu_online(). Signed-off-by: NKeith Owens <kaos@sgi.com> Signed-off-by: NTony Luck <tony.luck@intel.com>
-
由 Keith Owens 提交于
Add an extra thread_info flag to indicate the special MCA/INIT stacks. Mainly for debuggers. Signed-off-by: NKeith Owens <kaos@sgi.com> Signed-off-by: NTony Luck <tony.luck@intel.com>
-
由 Keith Owens 提交于
Scheduler hooks to see/change which process is deemed to be on a cpu. Signed-off-by: NKeith Owens <kaos@sgi.com> Signed-off-by: NTony Luck <tony.luck@intel.com>
-
由 Sam Ravnborg 提交于
Cannot build MIPS now. We need to change offset.c to asm-offsets.c Signed-off-by: NYoichi Yuasa <yuasa@hh.iij4u.or.jp> Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-
由 Sam Ravnborg 提交于
Al Viro reported that sometimes silentoldconfig failed because output directory was missing. So create it unconditionally before executing conf Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-
由 Sam Ravnborg 提交于
When introducing the generic asm-offsets.h support the dependency chain for the prepare targets was changed. All build scripts expecting include/asm/asm-offsets.h to be made when using the prepare target would broke. With the limited number of prepare targets left in arch Makefiles the trivial solution was to introduce a new arch specific target: archprepare The dependency chain looks like this now: prepare | +--> prepare0 | +--> archprepare | +--> scripts_basic +--> prepare1 | +---> prepare2 | +--> prepare3 So prepare 3 is processed before prepare2 etc. This guaantees that the asm symlink, version.h, scripts_basic are all updated before archprepare is processed. prepare0 which build the asm-offsets.h file will need the actions performed by archprepare. The head target is now named prepare, because users scripts will most likely use that target, but prepare-all has been kept for compatibility. Updated Documentation/kbuild/makefiles.txt. Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-
由 Linus Torvalds 提交于
-
由 Linus Torvalds 提交于
Clash due to new delete_inode behavior (the filesystem now needs to do the truncate_inode_pages() call itself). Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Willy Tarreau 提交于
This ports the Sun GEM ROM mapping/enable fixes it sunhme (which used the same PCI ROM mapping code). Without this, I get NULL MAC addresses for all 4 ports (it's a SUN QFE). With it, I get the correct addresses (the ones printed on the label on the card). Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Linus Torvalds 提交于
This same patch was reported to fix the MAC address detection on sunhme (next patch). Most people seem to be running this on Sparcs or PPC machines, where we get the MAC address from their respective firmware rather than from the (previously broken) ROM mapping routines. Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Linus Torvalds 提交于
This is one heck of a confused driver. It uses a byte write to a dword register to enable a ROM resource that it doesn't even seem to be using. "Lost and wandering in the desert of confusion" Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Linus Torvalds 提交于
-
- 11 9月, 2005 18 次提交
-
-
由 Pavel Machek 提交于
These are small ucb1x00-ts cleanups, as suggested by Vojtech, Dmitri and the lists. Signed-off-by: NPavel Machek <pavel@suse.cz> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
Add support for Intel assabet specific board support for UCB1200/UCB1300 devices. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
Add support for Philips UCB1200 and UCB1300 touchscreen interfaces found on ARM devices. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
Add the core device support code for the Philips UCB1200 and UCB1300 devices. Also includes the following from Pavel: This fixes u32 vs. pm_message_t confusion and uses cleaner try_to_freeze() [fixing compilation as a side-effect on newer kernels.] Signed-off-by: NPavel Machek <pavel@suse.cz> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Linus Torvalds 提交于
-
由 Alexey Dobriyan 提交于
Fix drivers/video/nvidia/nv_of.c:34: error: conflicting types for 'nvidia_probe_i2c_connector' drivers/video/nvidia/nv_proto.h:38: error: previous declaration of 'nvidia_probe_i2c_connector' was here Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Acked-by: NAl Viro <viro@ZenIV.linux.org.uk> Acked-by: NAntonino Daplas <adaplas@pol.net> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Herbert Xu 提交于
There is an extra left_out/lost_out adjustment in tcp_fragment which means that the lost_out accounting is always wrong. This patch removes that chunk of code. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Al Viro 提交于
mingo missed that one... Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Linus Torvalds 提交于
-
由 Linus Torvalds 提交于
-
由 Sam Ravnborg 提交于
iThis fixes a bug where the generated asm-offsets.h file was saved in the source tree even with make O=. Thanks to Stephen Rothwell <sfr@canb.auug.org.au> for the report. Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-
由 Sam Ravnborg 提交于
Use foo := $(call objectify, $(foo)) to prefix $(foo) with $(obj)/ unless $(foo) is an absolute path. For now no in-tree users - soon to come. Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-
The PTE returned from handle_mm_fault is already marked as dirty and accessed if needed. Also, since this is not set with set_pte() (which sets NEWPAGE and NEWPROT as needed), this wouldn't work anyway. This version has been updated and fixed, thanks to some feedback from Jeff Dike. Signed-off-by: NPaolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
The UML fault handler was recently changed to enforce PROT_NONE protections, by requiring VM_READ or VM_EXEC on VMA's. However, by mistake, things were changed such that VM_READ is always checked, also on write faults; so a VMA mapped with only PROT_WRITE is not readable (unless it's prefaulted with MAP_POPULATE or with a write), which is different from i386. Discovered while testing remap_file_pages protection support. Signed-off-by: NPaolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
Turns out that, for UML, a *lot* of VM-related trivial functions are not inlined but rather normal functions. In other sections of UML code, this is justified by having files which interact with the host and cannot therefore include kernel headers, but in this case there's no such justification. I've had to turn many of them to macros because of missing declarations. While doing this, I've decided to reuse some already existing macros. Signed-off-by: NPaolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
Use the new macros for x86_64 too. Note that the current scripts includes different definitions; more exactly, it only contains part of the DWARF2 sections and the .comment one from Stabs. Shouldn't be a problem, anyway. Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: NPaolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
Inside the linker script, insert the code for DWARF debug info sections. This may help GDB'ing a Uml binary. Actually, it seems that ld is able to guess what I added correctly, but normal linker scripts include this section so it should be correct anyway adding it. On request by Sam Ravnborg <sam@ravnborg.org>, I've added it to asm-generic/vmlinux.lds.s. I've also moved there the stabs debug section, used the new macro in i386 linker script and added DWARF debug section to that. In the truth, I've not been able to verify the difference in GDB behaviour after this change (I've seen large improvements with another patch). This may depend on my binutils version, older one may have worse defaults. However, this section is present in normal linker script, so add it at least for the sake of cleanness. Signed-off-by: NPaolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Acked-by: NSam Ravnborg <sam@ravnborg.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
We must remove even arch/um/os-Linux/util/mk_user_constants, which we don't do. Also, Kconfig_arch must be listed only once, between CLEAN_FILES. Signed-off-by: NPaolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-