- 18 10月, 2005 15 次提交
-
-
由 Ben Dooks 提交于
Patch from Ben Dooks Check that the device we are looking at is really a platform device before trying to cast it to one to find out the platform bus number. Thanks to RMK for pointing this out. Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Mark Rustad 提交于
The following build error happens with 2.6.14-rc4 when CONFIG_KALLSYMS is not defined. The error message in a fragment of the output was: CC arch/i386/lib/usercopy.o AR arch/i386/lib/lib.a /bin/sh: line 1: +@: command not found make[3]: warning: jobserver unavailable: using -j1. Add `+' to parent make rule. CHK include/linux/compile.h Signed-off-by: NMark Rustad <mrustad@mac.com> Signed-off-by: NSam Ravnborg <sam@ravnborg.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Zach Brown 提交于
lock_kiocb() was introduced to serialize retrying and cancellation. In the process of doing so it tried to sleep waiting for KIF_LOCKED while holding the ctx_lock spinlock. Recent fixes have ensured that multiple concurrent retries won't be attempted for a given iocb. Cancel has other problems and has no significant in-tree users that have been complaining about it. So for the immediate future we'll revert sleeping with the lock held and will address proper cancellation and retry serialization in the future. Signed-off-by: NZach Brown <zach.brown@oracle.com> Acked-by: NBenjamin LaHaise <bcrl@kvack.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Dmitry Torokhov 提交于
Only signal completion after marking request slot as free, otherwise other processor can free request structure before we finish using it. Signed-off-by: NDmitry Torokhov <dtor@mail.ru> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Pavel Machek 提交于
Fix -EIO on /proc/acpi/events after suspends. This actually breaks suspending by power button in many setups. Signed-off-by: NPavel Machek <pavel@suse.cz> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Stephan Brodkorb 提交于
Since Revision 1.10 was released the n_r3964 module wasn't able to receive any data. The reason for that behavior is because there were some wrong calls of mod_timer(...) in the function receive_char (...). This patch should fix this problem and was successfully tested with talking to some kuka industrial robots. Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 David McCullough 提交于
Currently you do not get all the map entries on nommu systems because the start function doesn't index into the list using the value of "pos". Signed-off-by: NDavid McCullough <davidm@snapgear.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Eric Dumazet 提交于
This makes call_rcu() keep track of how many events there are on the RCU list, and cause a reschedule event when the list gets too long. This helps keep RCU event lists down. Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jeff Garzik 提交于
This change makes quirk_intel_ide_combined() dependent on the precise conditions under which it is needed: * IDE is built in * IDE SATA option is not set * ata_piix or ahci drivers are enabled This fixes an issue where some modular configurations would not cause the quirk to be enabled. Signed-off-by: NJeff Garzik <jgarzik@pobox.com> Signed-off-by: NLinus torvalds <torvalds@osdl.org>
-
由 Oleg Nesterov 提交于
Make sure we release the task struct properly when releasing pending timers. release_task() does write_lock_irq(&tasklist_lock), so it can't race with run_posix_cpu_timers() on any cpu. Signed-off-by: NOleg Nesterov <oleg@tv-sign.ru> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Trond Myklebust 提交于
Oopsable since nfs_wait_on_inode() can get called as part of iput_final(). Unnecessary since the caller had better be damned sure that the inode won't disappear from underneath it anyway. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Trond Myklebust 提交于
If the data cache has been marked as potentially invalid by nfs_refresh_inode, we should invalidate it rather than assume that changes are due to our own activity. Also ensure that we always start with a valid cache before declaring it to be protected by a delegation. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Christian Krause 提交于
During the development of an USB device I found a bug in the handling of Highspeed HID devices in the kernel. What happened? Highspeed HID devices are correctly recognized and enumerated by the kernel. But even if usbhid kernel module is loaded, no HID reports are received by the kernel. The output of the hardware USB analyzer told me that the host doesn't even poll for interrupt IN transfers (even the "interrupt in" USB transfer are polled by the host). After some debugging in hid-core.c I've found the reason. In case of a highspeed device, the endpoint interval is re-calculated in driver/usb/input/hid-core.c: line 1669: /* handle potential highspeed HID correctly */ interval = endpoint->bInterval; if (dev->speed == USB_SPEED_HIGH) interval = 1 << (interval - 1); Basically this calculation is correct (refer to USB 2.0 spec, 9.6.6). This new calculated value of "interval" is used as input for usb_fill_int_urb: line 1685: usb_fill_int_urb(hid->urbin, dev, pipe, hid->inbuf, 0, hid_irq_in, hid, interval); Unfortunately the same calculation as above is done a second time in usb_fill_int_urb in the file include/linux/usb.h: line 933: if (dev->speed == USB_SPEED_HIGH) urb->interval = 1 << (interval - 1); else urb->interval = interval; This means, that if the endpoint descriptor (of a high speed device) specifies e.g. bInterval = 7, the urb->interval gets the value: hid-core.c: interval = 1 << (7-1) = 0x40 = 64 urb->interval = 1 << (interval -1) = 1 << (63) = integer overflow Because of this the value of urb->interval is sometimes negative and is rejected in core/urb.c: line 353: /* too small? */ if (urb->interval <= 0) return -EINVAL; The conclusion is, that the recalculaton of the interval (which is necessary for highspeed) should not be made twice, because this is simply wrong. ;-) Re-calculation in usb_fill_int_urb makes more sense, because it is the most general approach. So it would make sense to remove it from hid-core.c. Because in hid-core.c the interval variable is only used for calling usb_fill_int_urb, it is no problem to remove the highspeed re-calculation in this file. Signed-off-by: NChristian Krause <chkr@plauener.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Olav Kongas 提交于
Increased use of scatter-gather by usb-storage driver after 2.6.13 has exposed a buggy codepath in isp116x-hcd, which was probably never visited before: bug happened only for those urbs, for which URB_SHORT_NOT_OK was set AND short transfer occurred. The fix attached was tested in 2 ways: (a) it fixed failing initialization of a flash drive with an embedded hub; (b) the fix was tested with 'usbtest' against a modified g_zero driver (on top of net2280), which generated short bulk IN transfers of various lengths including multiples and non-multiples of max_packet_length. Signed-off-by: NOlav Kongas <ok@artecdesign.ee> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Linus Torvalds 提交于
Dipankar made RCU limit the batch size to improve latency, but that approach is unworkable: it can cause the RCU queues to grow without bounds, since the batch limiter ended up limiting the callbacks. So make the limit much higher, and start planning on instead limiting the batch size by doing RCU callbacks more often if the queue looks like it might be growing too long. Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 17 10月, 2005 5 次提交
-
-
由 Ronald S. Bultje 提交于
Fix the fact that the svideo input will only give input in black/white in some circumstances. Reason is that in the PCI controller driver (zr36067), after setting input, we reset norm, which overwrites the input register with the default. This patch makes it always set the correct value for the input when changing norm. Signed-off-by: NRonald S. Bultje <rbultje@ronald.bitfreak.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Ronald S. Bultje 提交于
Fix bug #5404 in kernel bugzilla. It basically updates the vpx3220 initialization tables with some newer values that we've had in CVS for a while (and that, for some reason, never ended up in the kernel... must've gotten lost). Those fix a ~16 pixels noise at the top of the picture in at least SECAM, although (now that I think about it) PAL was probably affected, also. Signed-off-by: NRonald S. Bultje <rbultje@ronald.bitfreak.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Samuel Thibault 提交于
Fix bug 5441. I didn't know about messy programs like svgatextmode... Couldn't this be integrated in some linux/drivers/video/console/svgacon.c ?... So because of the existence of the svgatextmode program, the kernel is not supposed to touch to CRT_OVERFLOW/SYNC_END/DISP/DISP_END/OFFSET ? Disabling the check in vgacon_resize() might help indeed, but I'm really not sure whether it will work for any chipset: in my patch, CRT registers are set at each console switch, since stty rows/cols apply to consoles separately... The attached solution is to keep the test, but if it fails, we assume that the caller knows what it does (i.e. it is svgatextmode) and then disable any further call to vgacon_doresize. Svgatextmode is usually used to _expand_ the display, not to shrink it. And it is harmless in the case of a too big stty rows/cols: the display will just be cropped. I tested it on my laptop, and it works fine with svgatextmode. A better solution would be that svgatextmode explicitely tells the kernel not to care about video timing, but for this an interface needs be defined and svgatextmode be patched. Signed-off-by: NSamuel Thibault <samuel.thibault@ens-lyon.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Herbert Xu 提交于
It seems that all the list_*_rcu primitives are missing a memory barrier on the very first dereference. For example, #define list_for_each_rcu(pos, head) \ for (pos = (head)->next; prefetch(pos->next), pos != (head); \ pos = rcu_dereference(pos->next)) It will go something like: pos = (head)->next prefetch(pos->next) pos != (head) do stuff We're missing a barrier here. pos = rcu_dereference(pos->next) fetch pos->next barrier given by rcu_dereference(pos->next) store pos Without the missing barrier, the pos->next value may turn out to be stale. In fact, if "do stuff" were also dereferencing pos and relying on list_for_each_rcu to provide the barrier then it may also break. So here is a patch to make sure that we have a barrier for the first element in the list. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Acked-by: N"Paul E. McKenney" <paulmck@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Linus Torvalds 提交于
As noticed by Nick Piggin, we need to make sure that we check the page count before we check for PageDirty, since the dirty check is only valid if the count implies that we're the only possible ones holding the page. We always did do this, but the code needs a read-memory-barrier to make sure that the orderign is also honored by the CPU. (The writer side is ordered due to the atomic decrement and test on the page count, see the discussion on linux-kernel) Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 16 10月, 2005 2 次提交
-
-
由 Al Viro 提交于
... otherwise, things like alpha and sparc64 break and break badly. They define cpu_possible_map to something else in smp.h *AFTER* having included cpumask.h. If that puppy is a macro, expansion will happen at the actual caller, when we'd already seen #define cpu_possible_map ... and we will get the right thing used. As an inline helper it will be tokenized before we get to that define and that's it; no matter what we define later, it won't affect anything. We get modules with dependency on cpu_possible_map instead of the right symbol (phys_cpu_present_map in case of sparc64), or outright link errors if they are built-in. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Andrew Morton 提交于
Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 15 10月, 2005 18 次提交
-
-
由 Randall Nortman 提交于
Kernel version 2.6.13 introduced a regression in the generic USB serial converter driver (usbserial.o, drivers/usb/serial/generic.c). The bug manifests, as far as I can tell, whenever you attempt to write to the device -- the write will never complete (write() returns 0, or blocks). Signed-off-by: NRandall Nortman <oss@wonderclown.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Linus Torvalds 提交于
-
由 Linus Torvalds 提交于
-
由 Linus Torvalds 提交于
-
由 Kolli, Neela Syam 提交于
I am taking over all Megaraid SCSI drivers. Here is the patch for the MAINTENERS file. Signed-off-by: NNeela Syam Kolli <Neela.Kolli@engenio.com> Cc: James Bottomley <James.Bottomley@steeleye.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Yoshinori Sato 提交于
Argument does not agree. Signed-off-by: NYoshinori Sato <ysato@users.sourceforge.jp> Cc: Paul Mundt <lethal@linux-sh.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Yoshinori Sato 提交于
"proc_smaps_operations" is not defined in case of "CONFIG_MMU=n". Signed-off-by: NYoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Evgeniy Polyakov 提交于
drivers/built-in.o: In function `w1_alloc_dev': undefined reference to `netlink_kernel_create' drivers/built-in.o: In function `w1_alloc_dev': undefined reference to `sock_release' Signed-off-by: NEvgeniy Polyakov <johnpol@2ka.mipt.ru> Cc: Greg KH <greg@kroah.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Mark Haverkamp 提交于
While doing some testing of error cases I ran into this bug. In some cases the reset handler can exit with the host_lock still held. Signed-off-by: NMark Haverkamp <markh@osdl.org> Cc: James Bottomley <James.Bottomley@steeleye.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Benjamin Herrenschmidt 提交于
Andreas Schwab spotted that recent kernels broke reporting of the PowerMac machine model in /proc/cpuinfo. This fixes it. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Hirokazu Takata 提交于
This patch fixes the following BUG message of arch/m32r/smp.c for CONFIG_DEBUG_PREEMPT: BUG: using smp_processor_id() in preemptible This message is displayed by an smp_processor_id() execution during kernel's preemptible-state. Signed-off-by: NHitoshi Yamamoto <hitoshiy@isl.melco.co.jp> Signed-off-by: NHirokazu Takata <takata@linux-m32r.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Matteo Croce 提交于
The aironet PCI driver has a build dependency on ISA that prevent the driver to compile on systems that doesn't support ISA, like x86_64. The driver really doesn't depend on ISA, it does some ISA stuff in the initialization code, since the driver supports both ISA and PCI cards. So the driver should depend on ISA_DMA_API to build on all systems, and this will not hurt PCI at all. Signed-off-by: NMatteo Croce <3297627799@wind.it> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Tim Schmielau 提交于
Fix copy and paste error in jiffies_to_AHZ conversion which leads to wrong BSD accounting information on alpha and ia64 when CONFIG_BSD_PROCESS_ACCT_V3 is turned on. Also update comment to match reorganised header files. Signed-off-by: NTim Schmielau <tim@physik3.uni-rostock.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Alexey Dobriyan 提交于
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Takashi Iwai 提交于
Adds the missing EXPORT_SYMBOL_GPL for getnstimeofday() when CONFIG_TIME_INTERPOLATION isn't set. Needed by drivers/char/mmtimer.c Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Pavel Machek 提交于
This fixes depenencies of collie keyboard. Signed-off-by: NPavel Machek <pavel@suse.cz> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Pavel Machek 提交于
This fixes wrong comments, non-working debug subsystem, and some potentially dangerous macros. Signed-off-by: NPavel Machek <pavel@suse.cz> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Pavel Machek 提交于
This fixes compilation with CPU_FREQ disabled. Signed-off-by: NPavel Machek <pavel@suse.cz> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-