- 01 3月, 2009 1 次提交
-
-
由 Theodore Ts'o 提交于
Add a new superblock value which tracks the lifetime amount of writes to the filesystem. This is useful in estimating the amount of wear on solid state drives (SSD's) caused by writes to the filesystem. Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
- 28 3月, 2009 1 次提交
-
-
由 Aneesh Kumar K.V 提交于
With delayed allocation we should not/cannot discard inode prealloc space during file close. We would still have dirty pages for which we haven't allocated blocks yet. With this fix after each get_blocks request we check whether we have zero reserved blocks and if yes and we don't have any writers on the file we discard inode prealloc space. Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
- 24 2月, 2009 2 次提交
-
-
由 Theodore Ts'o 提交于
When renaming a file such that a link to another inode is overwritten, force any delay allocated blocks that to be allocated so that if the filesystem is mounted with data=ordered, the data blocks will be pushed out to disk along with the journal commit. Many application programs expect this, so we do this to avoid zero length files if the system crashes unexpectedly. Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
由 Theodore Ts'o 提交于
When closing a file that had been previously truncated, force any delay allocated blocks that to be allocated so that if the filesystem is mounted with data=ordered, the data blocks will be pushed out to disk along with the journal commit. Many application programs expect this, so we do this to avoid zero length files if the system crashes unexpectedly. Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
- 26 2月, 2009 1 次提交
-
-
由 Theodore Ts'o 提交于
Add an ioctl which forces all of the delay allocated blocks to be allocated. This also provides a function ext4_alloc_da_blocks() which will be used by the following commits to force files to be fully allocated to preserve application-expected ext3 behaviour. Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
- 24 2月, 2009 1 次提交
-
-
由 Theodore Ts'o 提交于
The mpage_da_writepages() function is only used in one place, so inline it to simplify the call stack and make the code easier to understand. Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
- 23 2月, 2009 3 次提交
-
-
由 Theodore Ts'o 提交于
Struct mpage_da_data and mpage_add_bh_to_extent() use a fake struct buffer_head which is 104 bytes on an x86_64 system, but only use 24 bytes of the structure. On systems that use a spinlock for atomic_t, the stack savings will be even greater. It turns out that using a fake struct buffer_head doesn't even save that much code, and it makes the code more confusing since it's not used as a "real" buffer head. So just store pass b_size and b_state in mpage_add_bh_to_extent(), and store b_size, b_state, and b_block_nr in the mpage_da_data structure. Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
由 Theodore Ts'o 提交于
This parameter was always set to ext4_da_get_block_write(). Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
由 Theodore Ts'o 提交于
Some poeple are reading the ext4 feature list too literally and create dubious test cases involving very long filenames and 1k blocksize and then complain when they run into an htree-imposed limit. So add fine print to the "fix 32000 subdirectory limit" ext4 feature. Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
- 28 3月, 2009 1 次提交
-
-
由 Aneesh Kumar K.V 提交于
Make sure we validate extent details only when read from the disk. Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: NThiemo Nagel <thiemo.nagel@ph.tum.de> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
- 12 3月, 2009 1 次提交
-
-
由 Aneesh Kumar K.V 提交于
This patch adds checks to validate the extent entries along with extent headers, to avoid crashes caused by corrupt filesystems. Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
- 23 2月, 2009 1 次提交
-
-
由 Bryan Donlan 提交于
ext4_iget() returns -ESTALE if invoked on a deleted inode, in order to report errors to NFS properly. However, in ext4_lookup(), this -ESTALE can be propagated to userspace if the filesystem is corrupted such that a directory entry references a deleted inode. This leads to a misleading error message - "Stale NFS file handle" - and confusion on the part of the admin. The bug can be easily reproduced by creating a new filesystem, making a link to an unused inode using debugfs, then mounting and attempting to ls -l said link. This patch thus changes ext4_lookup to return -EIO if it receives -ESTALE from ext4_iget(), as ext4 does for other filesystem metadata corruption; and also invokes the appropriate ext*_error functions when this case is detected. Signed-off-by: NBryan Donlan <bdonlan@gmail.com> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
- 13 3月, 2009 1 次提交
-
-
由 Theodore Ts'o 提交于
The find_group_flex() inode allocator is now only used if the filesystem is mounted using the "oldalloc" mount option. It is replaced with the original Orlov allocator that has been updated for flex_bg filesystems (it should behave the same way if flex_bg is disabled). The inode allocator now functions by taking into account each flex_bg group, instead of each block group, when deciding whether or not it's time to allocate a new directory into a fresh flex_bg. The block allocator has also been changed so that the first block group in each flex_bg is preferred for use for storing directory blocks. This keeps directory blocks close together, which is good for speeding up e2fsck since large directories are more likely to look like this: debugfs: stat /home/tytso/Maildir/cur Inode: 1844562 Type: directory Mode: 0700 Flags: 0x81000 Generation: 1132745781 Version: 0x00000000:0000ad71 User: 15806 Group: 15806 Size: 1060864 File ACL: 0 Directory ACL: 0 Links: 2 Blockcount: 2072 Fragment: Address: 0 Number: 0 Size: 0 ctime: 0x499c0ff4:164961f4 -- Wed Feb 18 08:41:08 2009 atime: 0x499c0ff4:00000000 -- Wed Feb 18 08:41:08 2009 mtime: 0x49957f51:00000000 -- Fri Feb 13 09:10:25 2009 crtime: 0x499c0f57:00d51440 -- Wed Feb 18 08:38:31 2009 Size of extra inode fields: 28 BLOCKS: (0):7348651, (1-258):7348654-7348911 TOTAL: 259 Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
- 16 2月, 2009 3 次提交
-
-
由 Duane Griffin 提交于
At the moment there are few restrictions on which flags may be set on which inodes. Specifically DIRSYNC may only be set on directories and IMMUTABLE and APPEND may not be set on links. Tighten that to disallow TOPDIR being set on non-directories and only NODUMP and NOATIME to be set on non-regular file, non-directories. Introduces a flags masking function which masks flags based on mode and use it during inode creation and when flags are set via the ioctl to facilitate future consistency. Signed-off-by: NDuane Griffin <duaneg@dghda.com> Acked-by: NAndreas Dilger <adilger@sun.com> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
由 Duane Griffin 提交于
At present INDEX and EXTENTS are the only flags that new ext4 inodes do NOT inherit from their parent. In addition prevent the flags DIRTY, ECOMPR, IMAGIC, TOPDIR, HUGE_FILE and EXT_MIGRATE from being inherited. List inheritable flags explicitly to prevent future flags from accidentally being inherited. This fixes the TOPDIR flag inheritance bug reported at http://bugzilla.kernel.org/show_bug.cgi?id=9866. Signed-off-by: NDuane Griffin <duaneg@dghda.com> Acked-by: NAndreas Dilger <adilger@sun.com> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
由 Pekka Enberg 提交于
As spotted by kmemtrace, struct ext4_sb_info is 17664 bytes on 64-bit which makes it a very bad fit for SLAB allocators. The culprit of the wasted memory is ->s_blockgroup_lock which can be as big as 16 KB when NR_CPUS >= 32. To fix that, allocate ->s_blockgroup_lock, which fits nicely in a order 2 page in the worst case, separately. This shinks down struct ext4_sb_info enough to fit a 2 KB slab cache so now we allocate 16 KB + 2 KB instead of 32 KB saving 14 KB of memory. Acked-by: NAndreas Dilger <adilger@sun.com> Signed-off-by: NPekka Enberg <penberg@cs.helsinki.fi> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
- 15 2月, 2009 2 次提交
-
-
由 Wei Yongjun 提交于
The rec_len field in the directory entry is 16 bits, so to encode blocksizes larger than 64k becomes problematic. This patch allows us to supprot block sizes up to 256k, by using the low 2 bits to extend the range of rec_len to 2**18-1 (since valid rec_len sizes must be a multiple of 4). We use the convention that a rec_len of 0 or 65535 means the filesystem block size, for compatibility with older kernels. It's unlikely we'll see VM pages of up to 256k, but at some point we might find that the Linux VM has been enhanced to support filesystem block sizes > than the VM page size, at which point it might be useful for some applications to allow very large filesystem block sizes. Signed-off-by: NWei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
由 Theodore Ts'o 提交于
Signed-off-by: NWei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
- 07 2月, 2009 2 次提交
-
-
由 Theodore Ts'o 提交于
The static function ext4_group_used_meta_blocks() only has one caller, who already has access to the block group's group descriptor. So it's better to have ext4_init_block_bitmap() pass the group descriptor to ext4_group_used_meta_blocks(), so it doesn't need to call ext4_group_desc(). Previously this function did not check if ext4_group_desc() returned NULL due to an error, potentially causing a kernel OOPS report. This avoids the issue entirely. Signed-off-by: NThadeu Lima de Souza Cascardo <cascardo@holoscopio.com> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
由 Mike Snitzer 提交于
Remove some leftovers from when the old block allocator was removed (c2ea3fde). ext4_sb_info is now a bit lighter. Also remove a dangling read_block_bitmap() prototype. Signed-off-by: NMike Snitzer <snitzer@gmail.com> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
- 30 3月, 2009 1 次提交
-
-
由 Linus Torvalds 提交于
Merge branch 'bzip2-lzma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-tip * 'bzip2-lzma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-tip: bzip2/lzma: don't ask for compression mode for the default initramfs bzip2/lzma: consistently capitalize LZMA in Kconfig bzip2/lzma: clarify the meaning of the CONFIG_RD_ options bzip2/lzma: move CONFIG_RD_* options under CONFIG_EMBEDDED
-
- 29 3月, 2009 19 次提交
-
-
由 Ralf Baechle 提交于
<linux/irq.h> relies on <linux/gfp.h> and <linux/topology.h> having been included previous. If not, the errors like below will result. CC arch/mips/mti-malta/malta-int.o In file included from arch/mips/mti-malta/malta-int.c:25: include/linux/irq.h: In function ‘init_alloc_desc_masks’: include/linux/irq.h:444: error: implicit declaration of function ‘cpu_to_node’ include/linux/irq.h:446: error: ‘GFP_ATOMIC’ undeclared (first use in this function) include/linux/irq.h:446: error: (Each undeclared identifier is reported only once include/linux/irq.h:446: error: for each function it appears in.) make[3]: *** [arch/mips/mti-malta/malta-int.o] Error 1 make[2]: *** [arch/mips/mti-malta] Error 2 make[1]: *** [sub-make] Error 2 Fixed by including the two missing headers. Signed-off-by: NRalf Baechle <ralf@linux-mips.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Randy Dunlap 提交于
Fix kernel-doc errors in sched.c: the structs don't have kernel-doc notation and the short function description needs to be one line only. Error(kernel/sched.c:3197): cannot understand prototype: 'struct sd_lb_stats ' Error(kernel/sched.c:3228): cannot understand prototype: 'struct sg_lb_stats ' Error(kernel/sched.c:3375): duplicate section name 'Description' Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Randy Dunlap 提交于
Fix kernel-doc error in maple (it's not kernel-doc): Error(drivers/sh/maple/maple.c:782): cannot understand prototype: 'struct bus_type maple_bus_type = ' Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> cc: Paul Mundt <lethal@linux-sh.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip由 Linus Torvalds 提交于
* 'futexes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: futex: remove the pointer math from double_unlock_hb, fix futex: remove the pointer math from double_unlock_hb futex: clean up fault logic futex: unlock before returning -EFAULT futex: use current->time_slack_ns for rt tasks too futex: add double_unlock_hb() futex: additional (get|put)_futex_key() fixes futex: update futex commentary
-
由 Linus Torvalds 提交于
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6: smack: Add a new '-CIPSO' option to the network address label configuration netlabel: Cleanup the Smack/NetLabel code to fix incoming TCP connections lsm: Remove the socket_post_accept() hook selinux: Remove the "compat_net" compatibility code netlabel: Label incoming TCP connections correctly in SELinux lsm: Relocate the IPv4 security_inet_conn_request() hooks TOMOYO: Fix a typo. smack: convert smack to standard linux lists
-
由 David Howells 提交于
Annotate struct fs_struct's usage count to indicate the restrictions upon it. It may not be incremented, except by clone(CLONE_FS), as this affects the check in check_unsafe_exec() in fs/exec.c. Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NHugh Dickins <hugh@veritas.com> Cc: stable@kernel.org Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Hugh Dickins 提交于
check_unsafe_exec() also notes whether the fs_struct is being shared by more threads than will get killed by the exec, and if so sets LSM_UNSAFE_SHARE to make bprm_set_creds() careful about euid. But /proc/<pid>/cwd and /proc/<pid>/root lookups make transient use of get_fs_struct(), which also raises that sharing count. This might occasionally cause a setuid program not to change euid, in the same way as happened with files->count (check_unsafe_exec also looks at sighand->count, but /proc doesn't raise that one). We'd prefer exec not to unshare fs_struct: so fix this in procfs, replacing get_fs_struct() by get_fs_path(), which does path_get while still holding task_lock, instead of raising fs->count. Signed-off-by: NHugh Dickins <hugh@veritas.com> Cc: stable@kernel.org ___ fs/proc/base.c | 50 +++++++++++++++-------------------------------- 1 file changed, 16 insertions(+), 34 deletions(-) Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Hugh Dickins 提交于
Joe Malicki reports that setuid sometimes doesn't: very rarely, a setuid root program does not get root euid; and, by the way, they have a health check running lsof every few minutes. Right, check_unsafe_exec() notes whether the files_struct is being shared by more threads than will get killed by the exec, and if so sets LSM_UNSAFE_SHARE to make bprm_set_creds() careful about euid. But /proc/<pid>/fd and /proc/<pid>/fdinfo lookups make transient use of get_files_struct(), which also raises that sharing count. There's a rather simple fix for this: exec's check on files->count has been redundant ever since 2.6.1 made it unshare_files() (except while compat_do_execve() omitted to do so) - just remove that check. [Note to -stable: this patch will not apply before 2.6.29: earlier releases should just remove the files->count line from unsafe_exec().] Reported-by: NJoe Malicki <jmalicki@metacarta.com> Narrowed-down-by: NMichael Itz <mitz@metacarta.com> Tested-by: NJoe Malicki <jmalicki@metacarta.com> Signed-off-by: NHugh Dickins <hugh@veritas.com> Cc: stable@kernel.org Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Hugh Dickins 提交于
2.6.26's commit fd8328be "sanitize handling of shared descriptor tables in failing execve()" moved the unshare_files() from flush_old_exec() and several binfmts to the head of do_execve(); but forgot to make the same change to compat_do_execve(), leaving a CLONE_FILES files_struct shared across exec from a 32-bit process on a 64-bit kernel. It's arguable whether the files_struct really ought to be unshared across exec; but 2.6.1 made that so to stop the loading binary's fd leaking into other threads, and a 32-bit process on a 64-bit kernel ought to behave in the same way as 32 on 32 and 64 on 64. Signed-off-by: NHugh Dickins <hugh@veritas.com> Cc: stable@kernel.org Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 H. Peter Anvin 提交于
Impact: Kconfig noise reduction, documentation The default initramfs is so small that it makes no sense to worry about the additional memory taken by not double-compressing it. Therefore, don't bug the user with it. Also, improve the description of the option, which was downright incorrect. Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
-
由 H. Peter Anvin 提交于
Impact: message formatting Consistently spell LZMA in all capitals, since it (unlike gzip or bzip2) is an acronym. Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
-
由 H. Peter Anvin 提交于
Impact: Kconfig clarification Make it clear that the CONFIG_RD_* options are about what formats are supported, not about what formats are actually being used. Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
-
由 H. Peter Anvin 提交于
Impact: reduce Kconfig noise Move the options that control possible initramfs/initrd compressions underneath CONFIG_EMBEDDED. The only impact of leaving these options set to y is additional code in the init section of the kernel; there is no reason to burden non-embedded users with these options. Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
-
由 Ingo Molnar 提交于
-
git://jdelvare.pck.nerim.net/jdelvare-2.6由 Linus Torvalds 提交于
* 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6: i2c-core: Some style cleanups i2c-piix4: Add support for the Broadcom HT1100 chipset i2c-piix4: Add support to SB800 SMBus changes i2c-pca-platform: Use defaults if no platform_data given i2c-algo-pca: Use timeout for checking the state machine i2c-algo-pca: Rework waiting for a free bus i2c-algo-pca: Add PCA9665 support i2c: Adapt debug macros for KERN_* constants i2c-davinci: Fix timeout handling i2c: Adapter timeout is in jiffies i2c: Set a default timeout value for all adapters i2c: Add missing KERN_* constants to printks i2c-algo-pcf: Handle timeout correctly i2c-algo-pcf: Style cleanups eeprom/at24: Remove EXPERIMENTAL i2c-nforce2: Add support for MCP67, MCP73, MCP78S and MCP79 i2c: Clarify which clients are auto-removed i2c: Let checkpatch shout on users of the legacy model i2c: Document the different ways to instantiate i2c devices
-
由 Linus Torvalds 提交于
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (422 commits) [ARM] 5435/1: fix compile warning in sanity_check_meminfo() [ARM] 5434/1: ARM: OMAP: Fix mailbox compile for 24xx [ARM] pxa: fix the bad assumption that PCMCIA sockets always start with 0 [ARM] pxa: fix Colibri PXA300 and PXA320 LCD backlight pins imxfb: Fix TFT mode i.MX21/27: remove ifdef CONFIG_FB_IMX imxfb: add clock support mxc: add arch_reset() function clkdev: add possibility to get a clock based on the device name i.MX1: remove fb support from mach-imx [ARM] pxa: build arch/arm/plat-pxa/mfp.c only when PXA3xx or ARCH_MMP defined Gemini: Add support for Teltonika RUT100 Gemini: gpiolib based GPIO support v2 MAINTAINERS: add myself as Gemini architecture maintainer ARM: Add Gemini architecture v3 [ARM] OMAP: Fix compile for omap2_init_common_hw() MAINTAINERS: Add myself as Faraday ARM core variant maintainer ARM: Add support for FA526 v2 [ARM] acorn,ebsa110,footbridge,integrator,sa1100: Convert asm/io.h to linux/io.h [ARM] collie: fix two minor formatting nits ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/arjan/linux-2.6-async-for-30由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/arjan/linux-2.6-async-for-30: fastboot: remove duplicate unpack_to_rootfs() ide/net: flip the order of SATA and network init async: remove the temporary (2.6.29) "async is off by default" code Fix up conflicts in init/initramfs.c manually
-
git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6: Blackfin arch: be less noisy when gets a gpio conflict after kernel has booted Blackfin arch: add RSI's definitions to bf514 and bf516 Blackfin arch: add link-time asserts to make sure on-chip regions dont overflow Blackfin arch: sport spi needs 6 gpio pins Blackfin arch: add sport-spi related resource stuff to board file Blackfin arch: Blacklist Hibernate (PM_SUSPEND_MEM) on BF561 as well Blackfin arch: Privide BF537-STAMP platform data of ADP5520 Multifunction driver Blackfin arch: enable the platfrom PATA driver with CF Cards Blackfin arch: clean up sports header file Blackfin arch: convert BF5{18,27,48}_FAMILY to CONFIG_BF{51,52,54}x Blackfin arch: bf51x processors also have 8 timers Blackfin arch: add a check to make sure only Blackfin GPIOs may generate IRQs Blackfin arch: update default kernel configuration Blackfin arch: include linux headers that this one uses definitions from fro sport drivers
-
由 Linus Torvalds 提交于
Merge branch 'percpu-cpumask-x86-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'percpu-cpumask-x86-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (682 commits) percpu: fix spurious alignment WARN in legacy SMP percpu allocator percpu: generalize embedding first chunk setup helper percpu: more flexibility for @dyn_size of pcpu_setup_first_chunk() percpu: make x86 addr <-> pcpu ptr conversion macros generic linker script: define __per_cpu_load on all SMP capable archs x86: UV: remove uv_flush_tlb_others() WARN_ON percpu: finer grained locking to break deadlock and allow atomic free percpu: move fully free chunk reclamation into a work percpu: move chunk area map extension out of area allocation percpu: replace pcpu_realloc() with pcpu_mem_alloc() and pcpu_mem_free() x86, percpu: setup reserved percpu area for x86_64 percpu, module: implement reserved allocation and use it for module percpu variables percpu: add an indirection ptr for chunk page map access x86: make embedding percpu allocator return excessive free space percpu: use negative for auto for pcpu_setup_first_chunk() arguments percpu: improve first chunk initial area map handling percpu: cosmetic renames in pcpu_setup_first_chunk() percpu: clean up percpu constants x86: un-__init fill_pud/pmd/pte x86: remove vestigial fix_ioremap prototypes ... Manually merge conflicts in arch/ia64/kernel/irq_ia64.c
-