This patch fixes the issue of slow reconnection to an IBSS cell after
disconnection from it. Now the interface's bssid is reset upon ifdown.

ieee80211_sta_find_ibss:
if (found && memcmp(ifsta->bssid, bssid, ETH_ALEN) != 0 &&
	    (bss = ieee80211_rx_bss_get(dev, bssid,
					local->hw.conf.channel->center_freq,
					ifsta->ssid, ifsta->ssid_len)))

Note:
In general disconnection is still not handled properly in mac80211
Signed-off-by: NAssaf Krauss <assaf.krauss@intel.com>
Signed-off-by: NTomas Winkler <tomas.winkler@intel.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

This fixes an issus that made "iwconfig eth1 power on" non-working.
When we get a "PS sleep" event, we have to confirm this to the firmware.
The confirm happens with a command, but this command is special: the
firmware won't send us a response. if_cs_host_to_card() is setting
priv->dnld_sent anyway, so this variable stayed at DNLD_DATA_SENT and
was never cleared back.

Now I put the special knowledge that the CMD_802_11_PS_MODE with
CMD_SUBCMD_SLEEP_CONFIRMED doesn't need to need a response by directly
clearing the dnld_sent state in lbs_send_confirmsleep().
Signed-off-by: NHolger Schurig <hs4233@mail.mn-solutions.de>
Acked-by: NDan Williams <dcbw@redhat.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Otherwise userspace has no idea the IBSS creation succeeded.
Signed-off-by: NDan Williams <dcbw@redhat.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

When another scan is in progress, a direct scan gets dropped on the
floor.  However, that direct scan is usually the scan that's really
needed by userspace, and gets stomped on by all the broadcast scans the
ipw2200 driver issues internally.  Make sure the direct scan happens
eventually, and as a bonus ensure that the passive scan worker is
cleaned up when appropriate.

The change of request_passive_scan form a struct work to struct
delayed_work is only to make the set_wx_scan() code a bit simpler, it's
still only used with a delay of 0 to match previous behavior.
Signed-off-by: NDan Williams <dcbw@redhat.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Some problems have been experienced in the field which cause an oops
in the pppol2tp driver if L2TP tunnels fail while passing data.

The pppol2tp driver uses private data that is referenced via the
sk->sk_user_data of its UDP and PPPoL2TP sockets. This patch makes
sure that the driver uses sock_hold() when it holds a reference to the
sk pointer. This affects its sendmsg(), recvmsg(), getname(),
[gs]etsockopt() and ioctl() handlers.

Tested by ISP where problem was seen. System has been up 10 days with
no oops since running this patch. Without the patch, an oops would
occur every 1-2 days.

Signed-off-by: James Chapman <jchapman@katalix.com> 
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

skb_splice_bits temporary drops the socket lock while iterating over
the socket queue in order to break a reverse locking condition which
happens with sendfile. This, however, opens a window of opportunity
for tcp_collapse() to aggregate skbs and thus potentially free the
current skb used in skb_splice_bits and tcp_read_sock.

This patch fixes the problem by (re-)getting the same "logical skb"
after the lock has been temporary dropped.

Based on idea and initial patch from Evgeniy Polyakov.
Signed-off-by: NOctavian Purdila <opurdila@ixiacom.com>
Acked-by: NEvgeniy Polyakov <johnpol@2ka.mipt.ru>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

TCP "resets sent" counter is not incremented when a TCP Reset is 
sent via tcp_send_active_reset().
Signed-off-by: NSridhar Samudrala <sri@us.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The program below just leaks the raw kernel socket

int main() {
        int fd = socket(PF_INET, SOCK_RAW, IPPROTO_UDP);
        struct sockaddr_in addr;

        memset(&addr, 0, sizeof(addr));
        inet_aton("127.0.0.1", &addr.sin_addr);
        addr.sin_family = AF_INET;
        addr.sin_port = htons(2048);
        sendto(fd,  "a", 1, MSG_MORE, &addr, sizeof(addr));
        return 0;
}

Corked packet is allocated via sock_wmalloc which holds the owner socket,
so one should uncork it and flush all pending data on close. Do this in the
same way as in UDP.
Signed-off-by: NDenis V. Lunev <den@openvz.org>
Acked-by: NAlexey Kuznetsov <kuznet@ms2.inr.ac.ru>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If an L2TP daemon closes a tunnel socket while packets are queued in
the tunnel's reorder queue, a kernel warning is logged because the
socket is closed while skbs are still referencing it. The fix is to
purge the queue in the socket's release handler.

WARNING: at include/net/sock.h:351 udp_lib_unhash+0x41/0x68()
Pid: 12998, comm: openl2tpd Not tainted 2.6.25 #8
 [<c0423c58>] warn_on_slowpath+0x41/0x51
 [<c05d33a7>] udp_lib_unhash+0x41/0x68
 [<c059424d>] sk_common_release+0x23/0x90
 [<c05d16be>] udp_lib_close+0x8/0xa
 [<c05d8684>] inet_release+0x42/0x48
 [<c0592599>] sock_release+0x14/0x60
 [<c059299f>] sock_close+0x29/0x30
 [<c046ef52>] __fput+0xad/0x15b
 [<c046f1d9>] fput+0x17/0x19
 [<c046c8c4>] filp_close+0x50/0x5a
 [<c046da06>] sys_close+0x69/0x9f
 [<c04048ce>] syscall_call+0x7/0xb
Signed-off-by: NJames Chapman <jchapman@katalix.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Enable the Philips CPWUA054/00 in p54usb.

Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

This fixes a context assertion in ssb that makes b44 print
out warnings on resume.

This fixes the following kernel oops:
http://www.kerneloops.org/oops.php?number=12732
http://www.kerneloops.org/oops.php?number=11410Signed-off-by: NMichael Buesch <mb@bu3sch.de>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

The size was two small by two bytes.

Signed-off-by: Holger Schurig
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

If there are no networks on the free list, expire the oldest one when
creating a new adhoc network.  Because ipw2200 and the ieee80211 stack
don't actually cull old networks and place them back on the free list
unless they are needed for new probe responses, over time the free list
would become empty and creating an adhoc network would fail due to the !
list_empty(...) check.
Signed-off-by: NDan Williams <dcbw@redhat.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

WARNING: space prohibited between function name and open parenthesis '('
#22: FILE: drivers/net/wireless/airo.c:2907:
+	while ((IN4500 (ai, COMMAND) & COMMAND_BUSY) && (delay < 10000)) {

total: 0 errors, 1 warnings, 8 lines checked

./patches/wireless-airo-waitbusy-wont-delay.patch has style problems, please review.  If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.

Please run checkpatch prior to sending patches

Cc: Dan Williams <dcbw@redhat.com>
Cc: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

This fixes a kernel crash on rmmod, in the case where the controller
was restarted before doing the rmmod.
Signed-off-by: NMichael Buesch <mb@bu3sch.de>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Commit e9df2e8f ("[IPV6]: Use
appropriate sock tclass setting for routing lookup.") also changed the
way that ECN capable transports mark this capability in IPv6.  As a
result, SCTP was not marking ECN capablity because the traffic class
was never set.  This patch brings back the markings for IPv6 traffic.
Signed-off-by: NVlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When fast retransmit is triggered by a sack, we should flush the queue
only once so that only 1 retransmit happens.  Also, since we could
potentially have non-fast-rtx chunks on the retransmit queue, we need
make sure any chunks eligable for fast retransmit are sent first
during fast retransmission.
Signed-off-by: NVlad Yasevich <vladislav.yasevich@hp.com>
Tested-by: NWei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When we are trying to fast retransmit the lowest outstanding TSN, we
need to restart the T3-RTX timer, so that subsequent timeouts will
correctly tag all the packets necessary for retransmissions.
Signed-off-by: NVlad Yasevich <vladislav.yasevich@hp.com>
Tested-by: NWei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Correctly keep track of Fast Recovery state and do not reduce
congestion window multiple times during sucht state.
Signed-off-by: NVlad Yasevich <vladislav.yasevich@hp.com>
Tested-by: NWei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There's no need to execute sctp_v4_dst_saddr() for each
iteration, just move it out of loop.
Signed-off-by: NGui Jianfeng <guijianfeng@cn.fujitsu.com>
Signed-off-by: NVlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If the current retran_path is the only active one, it should
update it to the the next inactive one.
Signed-off-by: NGui Jianfeng <guijianfeng@cn.fujitsu.com>
Signed-off-by: NVlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This bug is able to corrupt fackets_out in very rare cases.
In order for this to cause corruption:
  1) DSACK in the middle of previous SACK block must be generated.
  2) In order to take that particular branch, part or all of the
     DSACKed segment must already be SACKed so that we have that
     in cache in the first place.
  3) The new info must be top enough so that fackets_out will be
     updated on this iteration.
...then fack_count is updated while skb wasn't, then we walk again
that particular segment thus updating fack_count twice for
a single skb and finally that value is assigned to fackets_out
by tcp_sacktag_one.

It is safe to call tcp_sacktag_one just once for a segment (at
DSACK), no need to call again for plain SACK.

Potential problem of the miscount are limited to premature entry
to recovery and to inflated reordering metric (which could even
cancel each other out in the most the luckiest scenarios :-)).
Both are quite insignificant in worst case too and there exists
also code to reset them (fackets_out once sacked_out becomes zero
and reordering metric on RTO).

This has been reported by a number of people, because it occurred
quite rarely, it has been very evasive. Andy Furniss was able to
get it to occur couple of times so that a bit more info was
collected about the problem using a debug patch, though it still
required lot of checking around. Thanks also to others who have
tried to help here.

This is listed as Bugzilla #10346. The bug was introduced by
me in commit 68f8353b ([TCP]: Rewrite SACK block processing & 
sack_recv_cache use), I probably thought back then that there's
need to scan that entry twice or didn't dare to make it go
through it just once there. Going through twice would have
required restoring fack_count after the walk but as noted above,
I chose to drop the additional walk step altogether here.
Signed-off-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Make use of local_irq_save and local_irq_restore rather then the
deprecated save_and_cli and restore_flags calls.
Signed-off-by: NMark Asselstine <mark.asselstine@windriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch fixes the usage of RIPEMD-160 in xfrm_algo which in turn
allows hmac(rmd160) to be used as authentication mechanism in IPsec
ESP and AH (see RFC 2857).
Signed-off-by: NAdrian-Ken Rueegsegger <rueegsegger@swiss-it.ch>
Acked-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NDenis V. Lunev <den@openvz.org>
Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>

IPv6 UDP sockets wth IPv4 mapped address use udp_sendmsg to send the data
actually. In this case ip_flush_pending_frames should be called instead
of ip6_flush_pending_frames.
Signed-off-by: NDenis V. Lunev <den@openvz.org>
Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>

It is not allowed to change underlying protocol for
   int fd = socket(PF_INET6, SOCK_RAW, IPPROTO_UDP);
Signed-off-by: NDenis V. Lunev <den@openvz.org>
Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>

Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>

The outgoing interface index (ipi6_ifindex) in IPV6_PKTINFO
ancillary data, is not checked if the source address (ipi6_addr)
is unspecified.  If the ipi6_ifindex is the not-exist interface,
it should be fail.

Based on patch from Shan Wei <shanwei@cn.fujitsu.com> and
Brian Haley <brian.haley@hp.com>.
Signed-off-by: NShan Wei <shanwei@cn.fujitsu.com>
Signed-off-by: NBrian Haley <brian.haley@hp.com>
Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>

 If get destination options with length which is not enough for that
option,getsockopt() will still return the real length of the option,
which is larger then the buffer space.
 This is because ipv6_getsockopt_sticky() returns the real length of
the option.

This patch fix this problem.
Signed-off-by: NYang Hongyang <yanghy@cn.fujitsu.com>
Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>

If we pass NULL data buffer to getsockopt(), it will return 0,
and the option length is set to -EFAULT:
    getsockopt(sk, IPPROTO_IPV6, IPV6_DSTOPTS, NULL, &len);

This is because ipv6_getsockopt_sticky() will return -EFAULT or
-EINVAL if some error occur.

This patch fix this problem.
Signed-off-by: NYang Hongyang <yanghy@cn.fujitsu.com>
Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>

- Allow longer lifetimes (>= 0x7fffffff/HZ) on 64bit archs
  by using unsigned long.
- Shadow this arithmetic overflow workaround by introducing
  helper functions: addrconf_timeout_fixup() and
  addrconf_finite_timeout().
Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>

Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>

I discover a strange behavior in [ipv4 in ipv6] tunnel. When IPv6 tunnel
payload is less than 40(0x28), packet can be sent to network, received in
physical interface, but not seen in IP tunnel interface. No counter increase
in tunnel interface.
Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>

As of now, the prefix length is not vaildated when adding or deleting
addresses. The value is passed directly into the inet6_ifaddr structure
and later passed on to memcmp() as length indicator which relies on
the value never to exceed 128 (bits).

Due to the missing check, the currently code allows for any 8 bit
value to be passed on as prefix length while using the netlink
interface, and any 32 bit value while using the ioctl interface.

[Use unsigned int instead to generate better code - yoshfuji]
Signed-off-by: NThomas Graf <tgraf@suug.ch>
Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>

ip6_sk_dst_lookup returns held dst entry. It should be released
on all paths beyond this point. Add missed release when up->pending
is set.

Bug report and initial patch by Denis V. Lunev <den@openvz.org>.
Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Acked-by: NDenis V. Lunev <den@openvz.org>

Commit 7cbca67c ("[IPV6]: Support
Source Address Selection API (RFC5014)") introduced NULL dereference
of asoc to sctp_v6_get_saddr in net/sctp/ipv6.c.
Pointed out by Johann Felix Soden <johfel@users.sourceforge.net>.
Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>