- 09 12月, 2014 1 次提交
-
-
由 Kan Liang 提交于
Using flag to distinguish between branch_history and normal callchain. Move the cpumode to add_callchain_ip function. No change in behavior. Signed-off-by: NKan Liang <kan.liang@intel.com> Acked-by: NJiri Olsa <jolsa@redhat.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1417532814-26208-3-git-send-email-kan.liang@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 02 12月, 2014 1 次提交
-
-
由 Andi Kleen 提交于
Currently branch stacks can be only shown as edge histograms for individual branches. I never found this display particularly useful. This implements an alternative mode that creates histograms over complete branch traces, instead of individual branches, similar to how normal callgraphs are handled. This is done by putting it in front of the normal callgraph and then using the normal callgraph histogram infrastructure to unify them. This way in complex functions we can understand the control flow that lead to a particular sample, and may even see some control flow in the caller for short functions. Example (simplified, of course for such simple code this is usually not needed), please run this after the whole patchkit is in, as at this point in the patch order there is no --branch-history, that will be added in a patch after this one: tcall.c: volatile a = 10000, b = 100000, c; __attribute__((noinline)) f2() { c = a / b; } __attribute__((noinline)) f1() { f2(); f2(); } main() { int i; for (i = 0; i < 1000000; i++) f1(); } % perf record -b -g ./tsrc/tcall [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.044 MB perf.data (~1923 samples) ] % perf report --no-children --branch-history ... 54.91% tcall.c:6 [.] f2 tcall | |--65.53%-- f2 tcall.c:5 | | | |--70.83%-- f1 tcall.c:11 | | f1 tcall.c:10 | | main tcall.c:18 | | main tcall.c:18 | | main tcall.c:17 | | main tcall.c:17 | | f1 tcall.c:13 | | f1 tcall.c:13 | | f2 tcall.c:7 | | f2 tcall.c:5 | | f1 tcall.c:12 | | f1 tcall.c:12 | | f2 tcall.c:7 | | f2 tcall.c:5 | | f1 tcall.c:11 | | | --29.17%-- f1 tcall.c:12 | f1 tcall.c:12 | f2 tcall.c:7 | f2 tcall.c:5 | f1 tcall.c:11 | f1 tcall.c:10 | main tcall.c:18 | main tcall.c:18 | main tcall.c:17 | main tcall.c:17 | f1 tcall.c:13 | f1 tcall.c:13 | f2 tcall.c:7 | f2 tcall.c:5 | f1 tcall.c:12 The default output is unchanged. This is only implemented in perf report, no change to record or anywhere else. This adds the basic code to report: - add a new "branch" option to the -g option parser to enable this mode - when the flag is set include the LBR into the callstack in machine.c. The rest of the history code is unchanged and doesn't know the difference between LBR entry and normal call entry. - detect overlaps with the callchain - remove small loop duplicates in the LBR Current limitations: - The LBR flags (mispredict etc.) are not shown in the history and LBR entries have no special marker. - It would be nice if annotate marked the LBR entries somehow (e.g. with arrows) v2: Various fixes. v3: Merge further patches into this one. Fix white space. v4: Improve manpage. Address review feedback. v5: Rename functions. Better error message without -g. Fix crash without -b. v6: Rebase v7: Rebase. Use NO_ENTRY in memset. v8: Port to latest tip. Move add_callchain_ip to separate patch. Skip initial entries in callchain. Minor cleanups. Signed-off-by: NAndi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/1415844328-4884-3-git-send-email-andi@firstfloor.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 25 11月, 2014 1 次提交
-
-
由 Namhyung Kim 提交于
Jiri reported that the commit 96d78059 ("perf tools: Make vmlinux short name more like kallsyms short name") segfaults on perf script. When processing kernel mmap event, it should access the 'kernel' variable as sometimes it cannot find a matching dso from build-id table so 'dso' might be invalid. Reported-by: NJiri Olsa <jolsa@redhat.com> Tested-by: NJiri Olsa <jolsa@redhat.com> Signed-off-by: NNamhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1416285028-30572-1-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 19 11月, 2014 2 次提交
-
-
由 Andi Kleen 提交于
Use the relative address, this makes get_srcline work correctly in the end. Signed-off-by: NAndi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/1415844328-4884-4-git-send-email-andi@firstfloor.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Andi Kleen 提交于
Move the code to resolve and add a new callchain entry into a new add_callchain_ip function. This will be used in the next patches to add LBRs too. No change in behavior. Signed-off-by: NAndi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/1415844328-4884-2-git-send-email-andi@firstfloor.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 05 11月, 2014 2 次提交
-
-
由 Namhyung Kim 提交于
The previous patch changed kernel dso name from '[kernel.kallsyms]' to vmlinux. However it might add confusion to old users accustomed to the old name. So change the short name to '[kernel.vmlinux]' to reduce such confusion. Before: # Overhead Command Shared Object Symbol # ........ .............. ....................... ............................... # 9.83% swapper vmlinux [k] intel_idle 4.10% awk libc-2.20.so [.] __strcmp_sse2 1.86% sed libc-2.20.so [.] __strcmp_sse2 1.78% netctl-auto libc-2.20.so [.] __strcmp_sse2 1.23% netctl-auto libc-2.20.so [.] __mbrtowc 1.21% firefox libxul.so [.] 0x00000000024b62bd 1.20% swapper vmlinux [k] cpuidle_enter_state 1.03% sleep vmlinux [k] copy_user_generic_unrolled After: # Overhead Command Shared Object Symbol # ........ .............. ....................... ............................... # 9.83% swapper [kernel.vmlinux] [k] intel_idle 4.10% awk libc-2.20.so [.] __strcmp_sse2 1.86% sed libc-2.20.so [.] __strcmp_sse2 1.78% netctl-auto libc-2.20.so [.] __strcmp_sse2 1.23% netctl-auto libc-2.20.so [.] __mbrtowc 1.21% firefox libxul.so [.] 0x00000000024b62bd 1.20% swapper [kernel.vmlinux] [k] cpuidle_enter_state 1.03% sleep [kernel.vmlinux] [k] copy_user_generic_unrolled Signed-off-by: NNamhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1415063674-17206-9-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Namhyung Kim 提交于
There's a problem on finding correct kernel symbols when perf report runs on a different kernel. Although a part of the problem was solved by the prior commit 0a7e6d1b ("perf tools: Check recorded kernel version when finding vmlinux"), there's a remaining problem still. When perf records samples, it synthesizes the kernel map using machine__mmap_name() and ref_reloc_sym like "[kernel.kallsyms]_text". You can easily see it using 'perf report -D' command. After finishing record, it goes through the recorded events to find maps/dsos actually used. And then record build-id info of them. During this process, it needs to load symbols in a dso and it'd call dso__load_vmlinux_path() since the default value of the symbol_conf. try_vmlinux_path is true. However it changes dso->long_name to a real path of the vmlinux file (e.g. /lib/modules/3.16.4/build/vmlinux) if one is running on a custom kernel. It resulted in that perf report reads the build-id of the vmlinux, but cannot use it since it only knows about the [kernel.kallsyms] map. It then falls back to possible vmlinux paths by using the recorded kernel version (in case of a recent version) or a running kernel silently. Even with the recent tools, this still has a possibility of breaking the result. As the build directory is a symbolic link, if one built a new kernel in the same directory with different source/config, the old link to vmlinux will point the new file. So it's absolutely needed to use build-id when finding a kernel image. In this patch, it's now changed to try to search a kernel dso in the existing dso list which was constructed during build-id table parsing so it'll always have a build-id. If not found, search "[kernel.kallsyms]". Before: $ perf report # Children Self Command Shared Object Symbol # ........ ........ ....... ................. ............................... # 72.15% 0.00% swapper [kernel.kallsyms] [k] set_curr_task_rt 72.15% 0.00% swapper [kernel.kallsyms] [k] native_calibrate_tsc 72.15% 0.00% swapper [kernel.kallsyms] [k] tsc_refine_calibration_work 71.87% 71.87% swapper [kernel.kallsyms] [k] module_finalize ... After (for the same perf.data): 72.15% 0.00% swapper vmlinux [k] cpu_startup_entry 72.15% 0.00% swapper vmlinux [k] arch_cpu_idle 72.15% 0.00% swapper vmlinux [k] default_idle 71.87% 71.87% swapper vmlinux [k] native_safe_halt ... Signed-off-by: NNamhyung Kim <namhyung@kernel.org> Acked-by: NIngo Molnar <mingo@kernel.org> Link: http://lkml.kernel.org/r/20140924073356.GB1962@gmail.com Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1415063674-17206-8-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 04 11月, 2014 1 次提交
-
-
由 Namhyung Kim 提交于
This patch adds basic support to handle compressed kernel module as some distro (such as Archlinux) carries on it now. The actual work using compression library will be added later. Signed-off-by: NNamhyung Kim <namhyung@kernel.org> Acked-by: NJiri Olsa <jolsa@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1415063674-17206-2-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 29 10月, 2014 4 次提交
-
-
由 Arnaldo Carvalho de Melo 提交于
The unwind__get_entries() already receives the thread parameter, from where it can obtain the matching machine structure, shorten the signature. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jean Pihet <jean.pihet@linaro.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-isjc6bm8mv4612mhi6af64go@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Arnaldo Carvalho de Melo 提交于
Shortening function signature lenght too, since a thread's machine can be obtained from thread->mg->machine, no need to pass thread, machine. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jean Pihet <jean.pihet@linaro.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-5wb6css280ty0cel5p0zo2b1@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Arnaldo Carvalho de Melo 提交于
So stop passing both machine and thread to several thread methods, reducing function signature length. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jean Pihet <jean.pihet@linaro.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-ckcy19dcp1jfkmdihdjcqdn1@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Arnaldo Carvalho de Melo 提交于
We were setting this only in machine__init(), i.e. for the map_groups that holds the kernel module maps, not for the one used for a thread's executable mmaps. Now we are sure that we can obtain the machine where a thread is by going via thread->mg->machine, thus we can, in the following patch, make all codepaths that receive machine _and_ thread, drop the machine one. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jean Pihet <jean.pihet@linaro.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-y6zgaqsvhrf04v57u15e4ybm@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 15 10月, 2014 1 次提交
-
-
由 Arnaldo Carvalho de Melo 提交于
A segfault happens on 'perf test hists_link' because we end up using a struct machines on the stack, and then machines__init() was not initializing the newly introduced rb_root, just the existing list_head. When we introduced struct dsos, to group the two ways to store dsos, i.e. the linked list and the rbtree, we didn't turned the initialization done in: machines__init(machines->host) -> machine__init() -> INIT_LIST_HEAD into a dsos__init() to keep on initializing the list_head but _as well_ initializing the rb_root, oops. All worked because outside perf-test we probably zalloc the whole thing which ends up initializing it in to NULL. So the problem looks contained to 'perf test' that uses it on stack, etc. Reported-by: NJiri Olsa <jolsa@redhat.com> Acked-by: Waiman Long <Waiman.Long@hp.com>, Cc: Adrian Hunter <adrian.hunter@intel.com>, Cc: Don Zickus <dzickus@redhat.com> Cc: Douglas Hatch <doug.hatch@hp.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Scott J Norton <scott.norton@hp.com> Cc: Waiman Long <Waiman.Long@hp.com>, Link: http://lkml.kernel.org/r/20141014180353.GF3198@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 02 10月, 2014 1 次提交
-
-
由 Waiman Long 提交于
With workload that spawns and destroys many threads and processes, it was found that perf-mem could took a long time to post-process the perf data after the target workload had completed its operation. The performance bottleneck was found to be the lookup and insertion of the new DSO structures (thousands of them in this case). In a dual-socket Ivy-Bridge E7-4890 v2 machine (30-core, 60-thread), the perf profile below shows what perf was doing after the profiled AIM7 shared workload completed: - 83.94% perf libc-2.11.3.so [.] __strcmp_sse42 - __strcmp_sse42 - 99.82% map__new machine__process_mmap_event perf_session_deliver_event perf_session__process_event __perf_session__process_events cmd_record cmd_mem run_builtin main __libc_start_main - 13.17% perf perf [.] __dsos__findnew __dsos__findnew map__new machine__process_mmap_event perf_session_deliver_event perf_session__process_event __perf_session__process_events cmd_record cmd_mem run_builtin main __libc_start_main So about 97% of CPU times were spent in the map__new() function trying to insert new DSO entry into the DSO linked list. The whole post-processing step took about 9 minutes. The DSO structures are currently searched linearly. So the total processing time will be proportional to n^2. To overcome this performance problem, the DSO code is modified to also put the DSO structures in a RB tree sorted by its long name in additional to being in a simple linked list. With this change, the processing time will become proportional to n*log(n) which will be much quicker for large n. However, the short name will still be searched using the old linear searching method. With that patch in place, the same perf-mem post-processing step took less than 30 seconds to complete. Signed-off-by: NWaiman Long <Waiman.Long@hp.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Douglas Hatch <doug.hatch@hp.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Scott J Norton <scott.norton@hp.com> Link: http://lkml.kernel.org/r/1412098575-27863-3-git-send-email-Waiman.Long@hp.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 30 9月, 2014 1 次提交
-
-
由 Waiman Long 提交于
This is a precursor patch to enable long name searching of DSOs using a rbtree. In this patch, a new dsos structure is created which contains only a list head structure for the moment. The new dsos structure is used, in turn, in the machine structure for the user_dsos and kernel_dsos fields. Only the following 3 dsos functions are modified to accept the new dsos structure parameter instead of list_head: - dsos__add() - dsos__find() - __dsos__findnew() Signed-off-by: NWaiman Long <Waiman.Long@hp.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Douglas Hatch <doug.hatch@hp.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Scott J Norton <scott.norton@hp.com> Link: http://lkml.kernel.org/r/1412021249-19201-2-git-send-email-Waiman.Long@hp.com [ Move struct dsos to dso.h to reduce the dso methods depends on machine.h ] Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 23 8月, 2014 3 次提交
-
-
由 Don Zickus 提交于
As we run "perf c2c" on more applications, we noticed we're missing significant samples from a common customer's application. Looking at the /proc/<pid>/maps file for the app, we see "rwxs" and "rwxp" permissions on many of the shared memory & heap regions, and on all the thread stacks. Because those regions have the "x" bit set, perf marks them with a MAP_FUNCTION type. Hence ip_resolve_data() never finds load or store events coming from them. We fixed this by re-calling thread__find_addr_location with MAP__FUNCTION in the case where map is NULL as a last ditch effort to map the sample before giving up and dropping it. Reported-by: NJoe Mario <jmario@redhat.com> Tested-by: NJoe Mario <jmario@redhat.com> Signed-off-by: NDon Zickus <dzickus@redhat.com> Acked-by: NJiri Olsa <jolsa@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Joe Mario <jmario@redhat.com> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1408591511-57884-1-git-send-email-dzickus@redhat.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Adrian Hunter 提交于
Add a function to determine if an address is in the kernel. This is based on the kernel function kernel_ip(). Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1408129739-17368-5-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Adrian Hunter 提交于
Rename machine__get_kernel_start_addr() to machine__get_running_kernel_start() so that a new function, with a similar name to the original name, can be added that gets the kernel start address from the kernel map. Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1408129739-17368-4-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 14 8月, 2014 2 次提交
-
-
由 Adrian Hunter 提交于
Add machine__thread_exec_comm() to return the comm that matches the last exec, if the comm_exec flag is present, or the last comm otherwise. Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1406786474-9306-3-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Adrian Hunter 提交于
For grouping together all the data from a single execution, which is needed for pairing calls and returns e.g. any outstanding calls when a process exec's will never return. Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1406786474-9306-2-git-send-email-adrian.hunter@intel.com [ Remove testing if comm->exec is false before setting it to true ] Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 24 7月, 2014 3 次提交
-
-
由 Adrian Hunter 提交于
The thread will be needed to determine the VDSO type. Reviewed-by: NJiri Olsa <jolsa@redhat.com> Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1406035081-14301-52-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Adrian Hunter 提交于
The VDSO temporary file is unlinked when a session is deleted. That precludes the possibilities that there is no session or there is more than one session. Correctly the vdso belongs to the machine so put the information on 'struct machine' and get rid of the global variables. Reviewed-by: NJiri Olsa <jolsa@redhat.com> Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/53CF9B14.7040408@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Adrian Hunter 提交于
This is preparation for removing the global variables used in vdso.c and thereby fixing the lifetime of the VDSO temporary file. Reviewed-by: NJiri Olsa <jolsa@redhat.com> Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1406035081-14301-45-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 23 7月, 2014 1 次提交
-
-
由 Adrian Hunter 提交于
Add an array to struct machine to store the current tid running on each cpu. Add machine functions to get / set the tid for a cpu. This will be used to determine the tid when decoding a per-cpu Instruction Trace. Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1406035081-14301-17-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 17 7月, 2014 3 次提交
-
-
由 Adrian Hunter 提交于
__machine__findnew_thread() creates a 'struct thread' but does not free it on the error path. Fix it. Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1405495184-20441-3-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Adrian Hunter 提交于
Events like sched_switch do not provide a pid (tgid) which can result in threads with an unknown pid. If the pid is later discovered, join the map groups. Note the thread's map groups should be empty because they are populated by MMAP events which do provide the pid and tid. Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1405498033-23817-1-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Adrian Hunter 提交于
The value used for unknown pids cannot be zero because that is used by the "idle" task. Use -1 instead. Also handle the unknown pid case when creating map groups. Note that, threads with an unknown pid should not occur because fork (or synthesized) events precede the thread's existence. Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1405332185-4050-2-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 27 6月, 2014 1 次提交
-
-
由 Sukadev Bhattiprolu 提交于
When saving the callchain on Power, the kernel conservatively saves excess entries in the callchain. A few of these entries are needed in some cases but not others. We should use the DWARF debug information to determine when the entries are needed. Eg: the value in the link register (LR) is needed only when it holds the return address of a function. At other times it must be ignored. If the unnecessary entries are not ignored, we end up with duplicate arcs in the call-graphs. Use the DWARF debug information to determine if any callchain entries should be ignored when building call-graphs. Callgraph before the patch: 14.67% 2234 sprintft libc-2.18.so [.] __random | --- __random | |--61.12%-- __random | | | |--97.15%-- rand | | do_my_sprintf | | main | | generic_start_main.isra.0 | | __libc_start_main | | 0x0 | | | --2.85%-- do_my_sprintf | main | generic_start_main.isra.0 | __libc_start_main | 0x0 | --38.88%-- rand | |--94.01%-- rand | do_my_sprintf | main | generic_start_main.isra.0 | __libc_start_main | 0x0 | --5.99%-- do_my_sprintf main generic_start_main.isra.0 __libc_start_main 0x0 Callgraph after the patch: 14.67% 2234 sprintft libc-2.18.so [.] __random | --- __random | |--95.93%-- rand | do_my_sprintf | main | generic_start_main.isra.0 | __libc_start_main | 0x0 | --4.07%-- do_my_sprintf main generic_start_main.isra.0 __libc_start_main 0x0 TODO: For split-debug info objects like glibc, we can only determine the call-frame-address only when both .eh_frame and .debug_info sections are available. We should be able to determin the CFA even without the .eh_frame section. Fix suggested by Anton Blanchard. Thanks to valuable input on DWARF debug information from Ulrich Weigand. Reported-by: NMaynard Johnson <maynard@us.ibm.com> Tested-by: NMaynard Johnson <maynard@us.ibm.com> Signed-off-by: NSukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/20140625154903.GA29607@us.ibm.comSigned-off-by: NJiri Olsa <jolsa@kernel.org>
-
- 20 6月, 2014 1 次提交
-
-
由 Simon Que 提交于
The function machine__get_kernel_start_addr() was taking the first symbol of kallsyms as the start address. This is incorrect in certain cases where the first symbol is something at 0, while the actual kernel functions begin at a later point (e.g. 0x80200000). This patch fixes machine__get_kernel_start_addr() to search for the symbol "_text" or "_stext", which marks the beginning of kernel mapping. This was already being done in machine__create_kernel_maps(). Thus, this patch is just a refactor, to move that code into machine__get_kernel_start_addr(). Signed-off-by: NSimon Que <sque@chromium.org> Link: http://lkml.kernel.org/r/1402943529-13244-1-git-send-email-sque@chromium.orgSigned-off-by: NJiri Olsa <jolsa@kernel.org>
-
- 09 6月, 2014 1 次提交
-
-
由 Don Zickus 提交于
The kernel piece passes more info now. Update the perf tool to reflect that and adjust the synthesized maps to play along. Signed-off-by: NDon Zickus <dzickus@redhat.com> Link: http://lkml.kernel.org/r/1400526833-141779-4-git-send-email-dzickus@redhat.comSigned-off-by: NJiri Olsa <jolsa@kernel.org>
-
- 30 4月, 2014 1 次提交
-
-
由 Richard Yao 提交于
Modules installed outside of the kernel's build system should go into "%s/lib/modules/%s/extra", but at present, perf will only look at them when they are in "%s/lib/modules/%s/kernel". Lets encourage good citizenship by relaxing this requirement to "%s/lib/modules/%s". This way open source modules that are out-of-tree have no incentive to start populating a directory reserved for in-kernel modules and I can stop hex-editing my system's perf binary when profiling OSS out-of-tree modules. Feedback from Namhyung Kim correctly revealed that the hex-edits that I had been doing meant that perf was also traversing the build and source symlinks in %s/lib/modules/%s. That is undesireable, so we explicitly exclude them from traversal with a minor tweak to the traversal routine. Signed-off-by: NRichard Yao <ryao@gentoo.org> Acked-by: NNamhyung kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/1398532675-13684-1-git-send-email-ryao@gentoo.orgSigned-off-by: NJiri Olsa <jolsa@kernel.org>
-
- 28 4月, 2014 1 次提交
-
-
由 Jiri Olsa 提交于
Sharing map groups within all process threads. This way there's only one copy of mmap info and it's reachable from any thread within the process. Original-patch-by: NArnaldo Carvalho de Melo <acme@kernel.org> Acked-by: NNamhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1397490723-1992-5-git-send-email-jolsa@redhat.comSigned-off-by: NJiri Olsa <jolsa@kernel.org>
-
- 19 3月, 2014 2 次提交
-
-
由 Don Zickus 提交于
Now that we can properly synthesize threads system-wide, make sure the mmap and mmap2 events use tids instead of pids to locate their maps. Signed-off-by: NDon Zickus <dzickus@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1393429527-167840-3-git-send-email-dzickus@redhat.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Namhyung Kim 提交于
By turning the addr_location->filtered member from a boolean to a u8 bitmap, reusing (and extending) the hist_filter enum for that. This patch doesn't change the logic at all, as it keeps the meaning of al->filtered !0 to mean that the entry _was_ filtered, so no change in how this value is interpreted needs to be done at this point. This will be soon used in upcoming patches. Signed-off-by: NNamhyung Kim <namhyung.kim@lge.com> Acked-by: NJiri Olsa <jolsa@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/n/tip-89hmfgtr9t22sky1lyg7nw7l@git.kernel.org [ yanked this out of a previous patch ] Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 15 3月, 2014 2 次提交
-
-
由 Jiri Olsa 提交于
Forcing the code to always search thread by pid/tid pair. The PID value will be needed in future to determine the process thread leader for map groups sharing. Signed-off-by: NJiri Olsa <jolsa@redhat.com> Acked-by: NAdrian Hunter <adrian.hunter@intel.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1394805606-25883-3-git-send-email-jolsa@redhat.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Arnaldo Carvalho de Melo 提交于
Its one level up thread__find_addr_location, where it will look in different domains for a sample: user, kernel, hypervisor, etc. Will soon be used by a patchkit by Andi Kleen. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-so6nxkh7xj48bc5kq4jpj991@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 10 3月, 2014 1 次提交
-
-
由 Don Zickus 提交于
When trying to map a bunch of instruction addresses to their respective threads, I kept getting a lot of bogus entries [I forget the exact reason as I patched my code months ago]. Looking through ip__resolve_ams, I noticed the check for if (al.sym) and realized, most times I have an al.map definition but sometimes an al.sym is undefined. In the cases where al.sym is undefined, the loop keeps going even though a valid al.map exists. Modify this check to use the more reliable al.map. This fixed my bogus entries. Signed-off-by: NDon Zickus <dzickus@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1393386227-149412-2-git-send-email-dzickus@redhat.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 18 2月, 2014 3 次提交
-
-
由 Jiri Olsa 提交于
Adding mask info into struct regs_dump to make the registers information compact. The mask was always passed along, so logically the mask info fits more into the struct regs_dump. Signed-off-by: NJiri Olsa <jolsa@redhat.com> Acked-by: NJean Pihet <jean.pihet@linaro.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jean Pihet <jean.pihet@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1389098853-14466-9-git-send-email-jolsa@redhat.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Arnaldo Carvalho de Melo 提交于
Since two of the parameters come from the same 'struct addr_location', rename machine__resolve_bstack() to sample__resolve_bstack() and pass the that addr_location instead. This is also for consistency with the same change that resulted in the sample__resolve_mem() function. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-99ecqt8jiyyksiyx3se7l5ia@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Arnaldo Carvalho de Melo 提交于
Since three of the parameters come from the same 'struct addr_location', rename machine__resolve_mem() to sample__resolve_mem() and pass the that addr_location instead. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-3f5otpssefh9l5hi1t259h8n@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-