- 15 4月, 2009 27 次提交
-
-
由 Jens Axboe 提交于
Explain that with __GFP_WAIT set it will not fail, and that the caller must never allocate more than 1 bio at the time. Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 Miklos Szeredi 提交于
There are lots of sequences like this, especially in splice code: if (pipe->inode) mutex_lock(&pipe->inode->i_mutex); /* do something */ if (pipe->inode) mutex_unlock(&pipe->inode->i_mutex); so introduce helpers which do the conditional locking and unlocking. Also replace the inode_double_lock() call with a pipe_double_lock() helper to avoid spreading the use of this functionality beyond the pipe code. This patch is just a cleanup, and should cause no behavioral changes. Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz> Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 Miklos Szeredi 提交于
Remove the now unused generic_file_splice_write_nolock() function. It's conceptually broken anyway, because splice may need to wait for pipe events so holding locks across the whole operation is wrong. Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz> Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 Miklos Szeredi 提交于
Rearrange locking of i_mutex on destination and call to ocfs2_rw_lock() so locks are only held while buffers are copied with the pipe_to_file() actor, and not while waiting for more data on the pipe. Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz> Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 Miklos Szeredi 提交于
Rearrange locking of i_mutex on destination so it's only held while buffers are copied with the pipe_to_file() actor, and not while waiting for more data on the pipe. Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz> Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 Miklos Szeredi 提交于
splice_from_pipe() is only called from two places: - generic_splice_sendpage() - splice_write_null() Neither of these require i_mutex to be taken on the destination inode. Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz> Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 Miklos Szeredi 提交于
Split up __splice_from_pipe() into four helper functions: splice_from_pipe_begin() splice_from_pipe_next() splice_from_pipe_feed() splice_from_pipe_end() splice_from_pipe_next() will wait (if necessary) for more buffers to be added to the pipe. splice_from_pipe_feed() will feed the buffers to the supplied actor and return when there's no more data available (or if all of the requested data has been copied). This is necessary so that implementations can do locking around the non-waiting splice_from_pipe_feed(). This patch should not cause any change in behavior. Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz> Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 FUJITA Tomonori 提交于
blk_rq_unmap_user() returns -EFAULT if a program passes an invalid address to kernel. SG_IO path needs to pass the returned value to user space instead of ignoring it. Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 Jens Axboe 提交于
"Zhang, Yanmin" <yanmin_zhang@linux.intel.com> reports that commit b029195d introduced a regression of about 50% with sequential threaded read workloads. The test case is: tiotest -k0 -k1 -k3 -f 80 -t 32 which starts 32 threads each reading a 80MB file. Twiddle the kick queue logic so that we do start IO immediately, if it appears to be a fully merged request. We can't really detect that, so just check if the request is bigger than a page or not. The assumption is that since single bio issues will first queue a single request with just one page attached and then later do merges on that, if we already have more than a page worth of data in the request, then the request is most likely good to go. Verified that this doesn't cause a regression with the test case that commit b029195d was fixing. It does not, we still see maximum sized requests for the queue-then-merge cases. Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 Jens Axboe 提交于
This is (again) a preparatory patch similar to commit a2a9537a. It open codes a simple async way of executing do_thaw_all() out of context, so we can get rid of pdflush. Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 Jens Axboe 提交于
We do per-device plugging, get rid of any references to tq_disk as that has been dead since 2.6.5 or so. Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 Jens Axboe 提交于
We can just use the block layer BLK_RW_SYNC/ASYNC defines now. Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 Jens Axboe 提交于
We can just use the block layer BLK_RW_SYNC/ASYNC defines now. Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 Jens Axboe 提交于
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 Jens Axboe 提交于
It's a somewhat twisty maze of hints and behavioural modifiers, try and clear it up a bit with some documentation. Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 Jens Axboe 提交于
Credit goes to Andrew Morton for spotting this one. Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 Christoph Hellwig 提交于
It's used by DM and MD and generally useful, so move the bio list helpers into bio.h. Signed-off-by: NChristoph Hellwig <hch@lst.de> Acked-by: NAlasdair G Kergon <agk@redhat.com> Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 Linus Torvalds 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel由 Linus Torvalds 提交于
* 'drm-intel-next' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel: drm/i915: fix scheduling while holding the new active list spinlock drm/i915: Allow tiling of objects with bit 17 swizzling by the CPU. drm/i915: Correctly set the write flag for get_user_pages in pread. drm/i915: Fix use of uninitialized var in 40a5f0de drm/i915: indicate framebuffer restore key in SysRq help message drm/i915: sync hdmi detection by hdmi identifier with 2D drm/i915: Fix a mismerge of the IGD patch (new .find_pll hooks missed) drm/i915: Implement batch and ring buffer dumping
-
由 Hugh Dickins 提交于
Revert part of af5c820a ("x86: cpumask: use work_on_cpu in arch/x86/kernel/microcode_core.c") That change is causing only one Intel CPU's microcode to be updated e.g. microcode: CPU3 updated from revision 0x9 to 0x17, date = 2005-04-22 where before it announced that also for CPU0 and CPU1 and CPU2. We cannot use work_on_cpu() in the CONFIG_MICROCODE_OLD_INTERFACE code, because Intel's request_microcode_user() involves a copy_from_user() from /sbin/microcode_ctl, which therefore needs to be on that CPU at the time. Signed-off-by: NHugh Dickins <hugh@veritas.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Shaohua Li 提交于
regression caused by commit 5e118f41: i915_gem_object_move_to_inactive() should be called in task context, as it calls fput(); Signed-off-by: Shaohua Li<shaohua.li@intel.com> [anholt: Add more detail to the comment about the lock break that's added] Signed-off-by: NEric Anholt <eric@anholt.net>
-
由 Linus Torvalds 提交于
Merge branch 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: lockdep: warn about lockdep disabling after kernel taint, fix
-
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: fuse: fix "direct_io" private mmap fuse: fix argument type in fuse_get_user_pages()
-
git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2: nilfs2: fix possible mismatch of sufile counters on recovery nilfs2: segment usage file cleanups nilfs2: fix wrong accounting and duplicate brelse in nilfs_sufile_set_error nilfs2: simplify handling of active state of segments fix nilfs2: remove module version nilfs2: fix lockdep recursive locking warning on meta data files nilfs2: fix lockdep recursive locking warning on bmap nilfs2: return f_fsid for statfs2
-
git://git.monstr.eu/linux-2.6-microblaze由 Linus Torvalds 提交于
* 'fixes-for-linus' of git://git.monstr.eu/linux-2.6-microblaze: microblaze: Add missing FILE tag to MAINTAINERS microblaze: remove duplicated #include's microblaze: struct device - replace bus_id with dev_name() microblaze: Simplify copy_thread() microblaze: Add TIMESTAMPING constants to socket.h microblaze: Add missing empty ftrace.h file microblaze: Fix problem with removing zero length files
-
git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: sh: Add in PCI bus for DMA API debugging. sh: Pre-allocate a reasonable number of DMA debug entries. sh: sh7786: modify usb setup timeout judgment bug. MAINTAINERS: Update sh architecture file patterns. sh: ap325: use edge control for ov772x camera sh: Plug in support for ARCH=sh64 using sh SRCARCH. sh: urquell: Fix up address mapping in board comments. sh: Add support for DMA API debugging. sh: Provide cpumask_of_pcibus() to fix NUMA build. sh: urquell: Add board comment sh: wire up sys_preadv/sys_pwritev() syscalls. sh: sh7785lcr: fix PCI address map for 32-bit mode sh: intc: Added resume from hibernation support to the intc
-
由 David Howells 提交于
Fix lpfc_parse_bg_err()'s use of do_div(). It should be passing a 64-bit variable as the first parameter. However, since it's only using a 32-bit variable, it doesn't need to use do_div() at all, but can instead use the division operator. This deals with the following warnings: CC drivers/scsi/lpfc/lpfc_scsi.o drivers/scsi/lpfc/lpfc_scsi.c: In function 'lpfc_parse_bg_err': drivers/scsi/lpfc/lpfc_scsi.c:1397: warning: comparison of distinct pointer types lacks a cast drivers/scsi/lpfc/lpfc_scsi.c:1397: warning: right shift count >= width of type drivers/scsi/lpfc/lpfc_scsi.c:1397: warning: passing argument 1 of '__div64_32' from incompatible pointer type Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 14 4月, 2009 13 次提交
-
-
由 Leandro Dorileo 提交于
Updates some usb_serial_port members documentation. Signed-off-by: NLeandro Dorileo <ldorileo@gmail.com> Signed-off-by: NAlan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Tony Breeds 提交于
In commit 51dcdfec ("parport: Use the PCI IRQ if offered") parport_pc_probe_port() gained an irqflags arg. This isn't being supplied on powerpc. This patch make powerpc fallback to the old behaviour, that is using "0" for irqflags. Fixes build failure: In file included from drivers/parport/parport_pc.c:68: arch/powerpc/include/asm/parport.h: In function 'parport_pc_find_nonpci_ports': arch/powerpc/include/asm/parport.h:32: error: too few arguments to function 'parport_pc_probe_port' arch/powerpc/include/asm/parport.h:32: error: too few arguments to function 'parport_pc_probe_port' arch/powerpc/include/asm/parport.h:32: error: too few arguments to function 'parport_pc_probe_port' make[3]: *** [drivers/parport/parport_pc.o] Error 1 Signed-off-by: NTony Breeds <tony@bakeyournoodle.com> Signed-off-by: NAlan Cox <alan@linux.intel.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alan Cox 提交于
These got overlooked first time around. Signed-off-by: NAlan Cox <alan@linux.intel.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alan Cox 提交于
If the ti-usb adapter returns an zero data length frame (which happens) then we leak a kref. Found by Christoph Mair <christoph.mair@gmail.com> who proposed a patch. The patch here is different as Christoph's patch didn't work for the case where tty = NULL and data arrived but Christoph did all the hard work chasing it down. Signed-off-by: NAlan Cox <alan@linux.intel.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alan Cox 提交于
ACM sets the low latency flag but calls the flip buffer routines from IRQ context which isn't permitted (and as of 2.6.29 causes a warning hence this one was caught) Fortunatelt ACM doesn't need to set this flag in the first place as it only set it to work around problems in ancient (pre tty flip rewrite) kernels. Reported-by: NChuck Ebbert <cebbert@redhat.com> Signed-off-by: NAlan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Michal Simek 提交于
Signed-off-by: NMichal Simek <monstr@monstr.eu>
-
由 Ingo Molnar 提交于
Impact: build fix for Sparc and s390 Stephen Rothwell reported that the Sparc build broke: In file included from kernel/panic.c:12: include/linux/debug_locks.h: In function '__debug_locks_off': include/linux/debug_locks.h:15: error: implicit declaration of function 'xchg' due to: 9eeba613: lockdep: warn about lockdep disabling after kernel taint There is some inconsistency between architectures about where exactly xchg() is defined. The traditional place is in system.h but the more logical point for it is in atomic.h - where most architectures (especially new ones) have it defined. These architecture also still offer it via system.h. Some, such as Sparc or s390 only have it in asm/system.h and not available via asm/atomic.h at all. Use the widest set of headers in debug_locks.h and also include asm/system.h. Reported-by: NStephen Rothwell <sfr@canb.auug.org.au> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Linus Torvalds <torvalds@linux-foundation.org> LKML-Reference: <20090414144317.026498df.sfr@canb.auug.org.au> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Huang Weiyi 提交于
Remove duplicated #include's in arch/microblaze/include/asm/io.h arch/microblaze/kernel/prom.c arch/microblaze/kernel/ptrace.c arch/microblaze/kernel/signal.c arch/microblaze/kernel/sys_microblaze.c Signed-off-by: NHuang Weiyi <weiyi.huang@gmail.com> Signed-off-by: NMichal Simek <monstr@monstr.eu>
-
由 Michal Simek 提交于
Signed-off-by: NMichal Simek <monstr@monstr.eu>
-
由 Michal Simek 提交于
Removing nr parameter from copy_tread function commit 6f2c55b8Signed-off-by: NMichal Simek <monstr@monstr.eu>
-
由 Michal Simek 提交于
This changes was introduce with commit: cb9eff09 net: new user space API for time stamping of incoming and outgoing packets Signed-off-by: NMichal Simek <monstr@monstr.eu>
-
由 Michal Simek 提交于
Signed-off-by: NMichal Simek <monstr@monstr.eu>
-
由 Michal Simek 提交于
Adding one new line was recommended solution. Test with make distclean Tested-by: NJeff Garzik <jgarzik@redhat.com> Signed-off-by: NMichal Simek <monstr@monstr.eu>
-