- 24 10月, 2010 40 次提交
-
-
由 Xiao Guangrong 提交于
The default state of 'kvm-amd.nested' is enabled now, so fix the documentation Signed-off-by: NXiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Gleb Natapov 提交于
Nested SVM checks for external interrupt after injecting nested exception. In case there is external interrupt pending the code generates "external interrupt exit" and overwrites previous exit info. If previously injected exception already generated exit it will be lost. Signed-off-by: NGleb Natapov <gleb@redhat.com> Acked-by: NJoerg Roedel <joerg.roedel@amd.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Avi Kivity 提交于
The PIC code used to be called from preempt_disable() context, which wasn't very good for PREEMPT_RT. That is no longer the case, so move back from raw_spinlock_t to spinlock_t. Signed-off-by: NAvi Kivity <avi@redhat.com> Acked-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Zachary Amsden 提交于
If preempted after kvmclock values are updated, but before hardware virtualization is entered, the last tsc time as read by the guest is never set. It underflows the next time kvmclock is updated if there has not yet been a successful entry / exit into hardware virt. Fix this by simply setting last_tsc to the newly read tsc value so that any computed nsec advance of kvmclock is nulled. Signed-off-by: NZachary Amsden <zamsden@redhat.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Joerg Roedel 提交于
This patch moves the detection whether a page-fault was nested or not out of the error code and moves it into a separate variable in the fault struct. Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Avi Kivity 提交于
No code changes. Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Avi Kivity 提交于
Change the interrupt injection code to work from preemptible, interrupts enabled context. This works by adding a ->cancel_injection() operation that undoes an injection in case we were not able to actually enter the guest (this condition could never happen with atomic injection). Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Avi Kivity 提交于
Currently vmx_complete_interrupts() can decode event information from vmx exit fields into the generic kvm event queues. Make it able to decode the information from the entry fields as well by parametrizing it. Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Avi Kivity 提交于
This allows reuse of vmx_complete_interrupts() for cancelling injections. Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Avi Kivity 提交于
vmx_complete_interrupts() does too much, split it up: - vmx_vcpu_run() gets the "cache important vmcs fields" part - a new vmx_complete_atomic_exit() gets the parts that must be done atomically - a new vmx_recover_nmi_blocking() does what its name says - vmx_complete_interrupts() retains the event injection recovery code This helps in reducing the work done in atomic context. Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Avi Kivity 提交于
Instead of blindly attempting to inject an event before each guest entry, check for a possible event first in vcpu->requests. Sites that can trigger event injection are modified to set KVM_REQ_EVENT: - interrupt, nmi window opening - ppr updates - i8259 output changes - local apic irr changes - rflags updates - gif flag set - event set on exit This improves non-injecting entry performance, and sets the stage for non-atomic injection. Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Avi Kivity 提交于
Commit "KVM: MMU: Make tdp_enabled a mmu-context parameter" made real-mode set ->direct_map, and changed the code that merges in the memory type depend on direct_map instead of tdp_enabled. However, in this case what really matters is tdp, not direct_map, since tdp changes the pte format regardless of whether the mapping is direct or not. As a result, real-mode shadow mappings got corrupted with ept memory types. The result was a huge slowdown, likely due to the cache being disabled. Change it back as the simplest fix for the regression (real fix is to move all that to vmx code, and not use tdp_enabled as a synonym for ept). Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Avi Kivity 提交于
Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Joerg Roedel 提交于
This patch fixes a bug in KVM where it _always_ reports the support of the SVM feature to userspace. But KVM only supports SVM on AMD hardware and only when it is enabled in the kernel module. This patch fixes the wrong reporting. Cc: stable@kernel.org Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Joerg Roedel 提交于
This patch implements the reporting of the nested paging feature support to userspace. Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Joerg Roedel 提交于
This patch adds INTR and NMI intercepts to the list of expected intercepts with an exit_int_info set. While this can't happen on bare metal it is architectural legal and may happen with KVMs SVM emulation. Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Joerg Roedel 提交于
This patch adds code to initialize the Nested Nested Paging MMU context when the L1 guest executes a VMRUN instruction and has nested paging enabled in its VMCB. Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Joerg Roedel 提交于
This patch adds the helper functions which will be used in the mmu context for handling nested nested page faults. Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Joerg Roedel 提交于
With Nested Paging emulation the NX state between the two MMU contexts may differ. To make sure that always the right fault error code is recorded this patch moves the NX state into struct kvm_mmu so that the code can distinguish between L1 and L2 NX state. Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Joerg Roedel 提交于
Currently the KVM softmmu implementation can not shadow a 32 bit legacy or PAE page table with a long mode page table. This is a required feature for nested paging emulation because the nested page table must alway be in host format. So this patch implements the missing pieces to allow long mode page tables for page table types. Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Joerg Roedel 提交于
This patch factors out the direct-mapping paths of the mmu_alloc_roots function into a seperate function. This makes it a lot easier to avoid all the unnecessary checks done in the shadow path which may break when running direct. In fact, this patch already fixes a problem when running PAE guests on a PAE shadow page table. Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Joerg Roedel 提交于
This function is implemented to load the pdptr pointers of the currently running guest (l1 or l2 guest). Therefore it takes care about the current paging mode and can read pdptrs out of l2 guest physical memory. Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Joerg Roedel 提交于
This function need to be able to load the pdptrs from any mmu context currently in use. So change this function to take an kvm_mmu parameter to fit these needs. As a side effect this patch also moves the cached pdptrs from vcpu_arch into the kvm_mmu struct. Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Joerg Roedel 提交于
KVM currently ignores fetch faults in the instruction emulator. With nested-npt we could have such faults. This patch adds the code to handle these. Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Joerg Roedel 提交于
This patch implements logic to make sure that either a page-fault/page-fault-vmexit or a nested-page-fault-vmexit is propagated back to the guest. Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Joerg Roedel 提交于
This patch introduces the init_kvm_nested_mmu() function which is used to re-initialize the nested mmu when the l2 guest changes its paging mode. Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Joerg Roedel 提交于
This patch introduces the kvm_read_guest_page_x86 function which reads from the physical memory of the guest. If the guest is running in guest-mode itself with nested paging enabled it will read from the guest's guest physical memory instead. The patch also changes changes the code to use this function where it is necessary. Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Joerg Roedel 提交于
This patch uses kvm_read_guest_page_tdp to make the walk_addr_generic functions suitable for two-level page table walking. Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Joerg Roedel 提交于
This patch adds a function which can read from the guests physical memory or from the guest's guest physical memory. This will be used in the two-dimensional page table walker. Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Joerg Roedel 提交于
This patch adds the functions to do a nested l2_gva to l1_gpa page table walk. Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Joerg Roedel 提交于
This patch introduces the walk_mmu pointer which points to the mmu-context currently used for gva_to_gpa translations. Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Joerg Roedel 提交于
This patch introduces a mmu-callback to translate gpa addresses in the walk_addr code. This is later used to translate l2_gpa addresses into l1_gpa addresses. Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Joerg Roedel 提交于
This is the first patch in the series towards a generic walk_addr implementation which could walk two-dimensional page tables in the end. In this first step the walk_addr function is renamed into walk_addr_generic which takes a mmu context as an additional parameter. Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Joerg Roedel 提交于
This patch introduces a struct with two new fields in vcpu_arch for x86: * fault.address * fault.error_code This will be used to correctly propagate page faults back into the guest when we could have either an ordinary page fault or a nested page fault. In the case of a nested page fault the fault-address is different from the original address that should be walked. So we need to keep track about the real fault-address. Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Joerg Roedel 提交于
This patch changes is_rsvd_bits_set() function prototype to take only a kvm_mmu context instead of a full vcpu. Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Joerg Roedel 提交于
Some logic of the init_kvm_softmmu function is required to build the Nested Nested Paging context. So factor the required logic into a seperate function and export it. Also make the whole init path suitable for more than one mmu context. Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Joerg Roedel 提交于
This patch introduces an inject_page_fault function pointer into struct kvm_mmu which will be used to inject a page fault. This will be used later when Nested Nested Paging is implemented. Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Joerg Roedel 提交于
This function pointer in the MMU context is required to implement Nested Nested Paging. Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Joerg Roedel 提交于
This patch introduces a special set_tdp_cr3 function pointer in kvm_x86_ops which is only used for tpd enabled mmu contexts. This allows to remove some hacks from svm code. Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Joerg Roedel 提交于
This is necessary to implement Nested Nested Paging. As a side effect this allows some cleanups in the SVM nested paging code. Signed-off-by: NJoerg Roedel <joerg.roedel@amd.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-