- 09 7月, 2008 23 次提交
-
-
由 Ivo van Doorn 提交于
Fix some register documentation in the register header files. This allows better parsing by userspace scripts which in turn helps debugging. Signed-off-by: NIvo van Doorn <IvDoorn@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Pavel Roskin 提交于
Signed-off-by: NPavel Roskin <proski@gnu.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Larry Finger 提交于
The gcc 3.4 fork used to compile the MN10300 port emits unwanted __ucmpdi2() calls for switch statements that use a 64bit value. This patch removes such a switch from b43legacy, and makes the code more like that used in b43. Thanks to Adrian Bunk <bunk@kernel.org> for reporting the problem. Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ivo van Doorn 提交于
rt2400 is the only currently available rt2x00 driver which supports reporting of the RX end time for frames. Since mac80211 uses this information for IBSS syncing, it is important that it is being reported. v2: Complement 32 bits of RX timestamp with upper 32bits from TSF Signed-off-by: NIvo van Doorn <IvDoorn@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ivo van Doorn 提交于
Remove the rt2x00 singlethreaded workqueue and move the link tuner and packet filter scheduled work to the ieee80211_hw->workqueue again. The only exception is the interface scheduled work handler which uses the mac80211 interface iterator under the RTNL lock. This work needs to be handled on the kernel workqueue to prevent lockdep issues. Signed-off-by: NIvo van Doorn <IvDoorn@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ivo van Doorn 提交于
We only need 4 bytes of headroom for alignment purposes in the RX frame. It was previously higher for optimization purposes which are no longer possible due to DMA mappings. v2: Fix patch error Signed-off-by: NIvo van Doorn <IvDoorn@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ivo van Doorn 提交于
With the new rfkill interface there is no longer a need for the input_polldev. Create a delayed_work structure which we can put on the mac80211 workqueue and poll the hardware every 1000ms. v2: Decrease poll frequency from 100ms to 1000ms Signed-off-by: NIvo van Doorn <IvDoorn@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Daniel Drake 提交于
Add some error checking to the new beacon configuration code. Signed-off-by: NDaniel Drake <dsd@gentoo.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Randy Dunlap 提交于
Fix more than 50 kernel-doc warnings in ieee80211/mac80211 kernel-doc notation. Fix a few typos also. Note: Some fields are marked as TBD and need to have their description corrected. Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
rfkill_add_switch() calls rfkill_toggle_radio() to set the state of a recently registered rfkill class to the current global state [for that rfkill->type]. The rfkill_toggle_radio() call is going to error out if the hardware is RFKILL_STATE_HARD_BLOCKED, and the global state is RFKILL_STATE_UNBLOCKED. That is a quite normal situation which I missed to account for. As things stand, the error return from rfkill_toggle_radio ends up causing rfkill_register to bail out with an error (de-registering the new switch in the process), which is Not Nice. Change rfkill_add_switch() to not return errors because of a failed call to rfkill_toggle_radio(). We can go back to returning errors again (if that's indeed the right thing to do) if we define the exact error codes the rfkill->toggle_radio callbacks are to return in each situation, so that we can ignore the right ones only. Bug reported by "kionez <kionez@anche.no>". Signed-off-by: NHenrique de Moraes Holschuh <hmh@hmh.eng.br> Cc: kionez <kionez@anche.no> Acked-by: NIvo van Doorn <IvDoorn@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
Improve rfkill_toggle_radio's kernel-doc header a bit. Signed-off-by: NHenrique de Moraes Holschuh <hmh@hmh.eng.br> Acked-by: NIvo van Doorn <IvDoorn@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Emmanuel Grumbach 提交于
Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Harvey Harrison 提交于
Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Harvey Harrison 提交于
Recalculate the offset pointers in the ccmp calculations rather than in the callers. Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Harvey Harrison 提交于
Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Harvey Harrison 提交于
Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Tomas Winkler 提交于
This patch removes call of ieee80211_bss_info_change_notify from within ieee80211_reset_erp_info. This allows gathering all bss info changes into one call to the driver in the disassociation flow. Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Acked-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Harvey Harrison 提交于
Do the check for sufficient skb->len explicitly and pass a pointer to the struct ieee80211_hdr directly to the michael_mic calculation. Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Harvey Harrison 提交于
ccmp_special_blocks was only using it to calculate data_len, calculate that directly. Use unaligned helpers rather than masking/shifting. Use symbolic constants for the masked frame_control, and do it directly on a le16 value. Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Harvey Harrison 提交于
ETH_ALEN and IEEE80211_QOS_CTL_LEN Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Harvey Harrison 提交于
Also remove the WLAN_IS_QOS_DATA inline after removing the last two users. This starts moving away from using rx->fc to using the header frame_control directly. Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Helmut Schaa 提交于
Signed-off-by: NHelmut Schaa <hschaa@suse.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Rami Rosen 提交于
This patch removes MAC80211_DEBUG from /net/mac80211/Kconfig (in MAC80211_DEBUG_COUNTERS config entry), and replaces MAC80211_DEBUG_MENU instead of MAC80211_DEBUG (in MAC80211_VERBOSE_SPECT_MGMT_DEBUG config entry). Signed-off-by: NRami Rosen <ramirose@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 08 7月, 2008 17 次提交
-
-
由 Adel Gadllah 提交于
This patch fixes the iwlwifi rfkill. It removes the input device from iwl3945, adds support for RFKILL_STATE_HARD_BLOCKED and calls rfkill_force_state() to update the state rather than accessing it directly. The calls to iwl|iwl3945_rfkill_set_hw_state() had to be moved because rfkill_force_state() cannot be called from an atomic context. Tested on iwl3945 and seems to work fine. Cc: Randy Dunlap <randy.dunlap@oracle.com> Cc: Ivo van Doorn <ivdoorn@gmail.com> Cc: Fabien Crespel <fcrespel@gmail.com> Cc: Zhu Yi <yi.zhu@intel.com> Cc: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: NAdel Gadllah <adel.gadllah@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Tomas Winkler 提交于
This patch fixes warning unused variable ifsta when compiling without CONFIG_MAC80211_VERBOSE_DEBUG Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Acked-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ron Rindjunsky 提交于
This patch sets the block ack request flag if needed Signed-off-by: NRon Rindjunsky <ron.rindjunsky@intel.com> Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Tomas Winkler 提交于
This patch removes useless tid assignment for management and control frames Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Acked-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ron Rindjunsky 提交于
This patch adds block ack request capability Signed-off-by: NEster Kummer <ester.kummer@intel.com> Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NRon Rindjunsky <ron.rindjunsky@intel.com> Acked-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ivo van Doorn 提交于
Probe responses shouldn't be encrypted, and mac80211 doesn't set the crypto key accordingly. However it didn't set the IEEE80211_TX_CTL_DO_NOT_ENCRYPT flag which means drivers could make an attempt to encrypt it, and causing a NULL pointer dereference when accessing the provided hw_key field. Signed-off-by: NIvo van Doorn <IvDoorn@gmail.com> Acked-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Tomas Winkler 提交于
This patch cleans rfkill error path. The problem was result of removing the input device Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Patrick McHardy 提交于
The VLAN code contains multiple spots that use tag, id and tci as identifiers for arguments and variables incorrectly and they actually contain or are expected to contain something different. Additionally types are used inconsistently (unsigned short vs u16) and identifiers are sometimes capitalized. - consistently use u16 for storing TCI, ID or QoS values - consistently use vlan_id and vlan_tci for storing the respective values - remove capitalization - add kdoc comment to netif_hwaccel_{rx,receive_skb} Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
Hide struct vlan_dev_info from drivers to prevent them from growing more creative ways to use it. Provide accessors for the two drivers that currently use it. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
The function is huge and included at least once in every VLAN acceleration capable driver. Uninline it; to avoid having drivers depend on the VLAN module, the function is always built in statically when VLAN is enabled. With all VLAN acceleration capable drivers that build on x86_64 enabled, this results in: text data bss dec hex filename 6515227 854044 343968 7713239 75b1d7 vmlinux.inlined 6505637 854044 343968 7703649 758c61 vmlinux.uninlined ---------------------------------------------------------- -9590 Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
Add ethtool support for querying the device for offload settings. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joonwoo Park 提交于
Use simplified is_vlan_dev function. Signed-off-by: NJoonwoo Park <joonwpark81@gmail.com> Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
Lennert Buytenhek points out that the VLAN code incorrectly adjusts skb->network_header to point in the middle of the VLAN header and additionally tries to adjust skb->mac_header without checking for validity. The network_header should not be touched at all since we're only adding headers in front of it, mac_header adjustments are not necessary at all. Based on patch by Lennert Buytenhek <buytenh@wantstofly.org>. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rafael J. Wysocki 提交于
Some IRDA headers contain references to 'struct pm_dev' that are not necessary any more and may be removed. Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl> Acked-by: NPavel Machek <pavel@suse.cz> Signed-off-by: NSamuel Ortiz <samuel@sortiz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Denis V. Lunev 提交于
It is possible to avoid locking at all in ipv4_sysctl_rtcache_flush by defining local ctl_table on the stack. The patch is based on the suggestion from Eric W. Biederman. Signed-off-by: NDenis V. Lunev <den@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Richard Kennedy 提交于
remove padding from struct socket reducing its size by 8 bytes. This allows more objects/cache in sock_inode_cache 12 objects/cache when cacheline size is 128 (generic x86_64) Signed-off-by: NRichard Kennedy <richard@rsk.demon.co.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-