The missing device table means that the floppy module is not auto-loaded,
even when the appropriate PNP device (0700) is found.

We don't actually use the table in the module, since the device doesn't
have a struct pnp_driver, but it's sufficient to cause an alias in the
module that udev/modprobe will use.
Signed-off-by: NScott James Remnant <scott@canonical.com>
Signed-off-by: NTim Gardner <tim.gardner@canonical.com>
Cc: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: Philippe De Muyter <phdm@macqel.be>
Acked-by: NKay Sievers <kay.sievers@vrfy.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Check bh->b_blocknr only if BH_Mapped is set.

akpm: I doubt if b_blocknr is ever uninitialised here, but it could
conceivably cause a problem if we're doing a lookup for block zero.
Signed-off-by: NNikanth Karthikesan <knikanth@suse.de>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

A new "address_space flag"--AS_MM_ALL_LOCKS--was defined to use the next
available AS flag while the Unevictable LRU was under development.  The
Unevictable LRU was using the same flag and "no one" noticed.  Current
mainline, since 2.6.28, has same value for two symbolic flag names.

So, define a unique flag value for AS_UNEVICTABLE--up close to the other
flags, [at the cost of an additional #ifdef] so we'll notice next time.
Note that #ifdef is not actually required, if we don't mind having the
unused flag value defined.

Replace #defines with an enum.
Signed-off-by: NLee Schermerhorn <lee.schermerhorn@hp.com>
Cc: <stable@kernel.org>		[2.6.28.x, 2.6.29.x]
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Include fiemap.h in header-y; it defines the interface for the
FS_IOC_FIEMAP file mapping ioctl.
Signed-off-by: NEric Sandeen <sandeen@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add a MAINTAINERS entry for the hypervisor virtual console driver.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Acked-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>
Cc: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The calculation of the value nr in do_xip_mapping_read is incorrect.  If
the copy required more than one iteration in the do while loop the copies
variable will be non-zero.  The maximum length that may be passed to the
call to copy_to_user(buf+copied, xip_mem+offset, nr) is len-copied but the
check only compares against (nr > len).

This bug is the cause for the heap corruption Carsten has been chasing
for so long:

*** glibc detected *** /bin/bash: free(): invalid next size (normal): 0x00000000800e39f0 ***
======= Backtrace: =========
/lib64/libc.so.6[0x200000b9b44]
/lib64/libc.so.6(cfree+0x8e)[0x200000bdade]
/bin/bash(free_buffered_stream+0x32)[0x80050e4e]
/bin/bash(close_buffered_stream+0x1c)[0x80050ea4]
/bin/bash(unset_bash_input+0x2a)[0x8001c366]
/bin/bash(make_child+0x1d4)[0x8004115c]
/bin/bash[0x8002fc3c]
/bin/bash(execute_command_internal+0x656)[0x8003048e]
/bin/bash(execute_command+0x5e)[0x80031e1e]
/bin/bash(execute_command_internal+0x79a)[0x800305d2]
/bin/bash(execute_command+0x5e)[0x80031e1e]
/bin/bash(reader_loop+0x270)[0x8001efe0]
/bin/bash(main+0x1328)[0x8001e960]
/lib64/libc.so.6(__libc_start_main+0x100)[0x200000592a8]
/bin/bash(clearerr+0x5e)[0x8001c092]

With this bug fix the commit 0e4a9b59
"ext2/xip: refuse to change xip flag during remount with busy inodes" can
be removed again.

Cc: Carsten Otte <cotte@de.ibm.com>
Cc: Nick Piggin <npiggin@suse.de>
Cc: Jared Hulbert <jaredeh@gmail.com>
Cc: <stable@kernel.org>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Align rekey_work. Even though it's infrequent, we may as well line it up.
Signed-off-by: NAnton Blanchard <anton@samba.org>
Acked-by: NMatt Mackall <mpm@selenic.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Even though vmstat_work is marked deferrable, there are still benefits to
aligning it.  For certain applications we want to keep OS jitter as low as
possible and aligning timers and work so they occur together can reduce
their overall impact.
Signed-off-by: NAnton Blanchard <anton@samba.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The dirtied_when value on an inode is supposed to represent the first time
that an inode has one of its pages dirtied.  This value is in units of
jiffies.  It's used in several places in the writeback code to determine
when to write out an inode.

The problem is that these checks assume that dirtied_when is updated
periodically.  If an inode is continuously being used for I/O it can be
persistently marked as dirty and will continue to age.  Once the time
compared to is greater than or equal to half the maximum of the jiffies
type, the logic of the time_*() macros inverts and the opposite of what is
needed is returned.  On 32-bit architectures that's just under 25 days
(assuming HZ == 1000).

As the least-recently dirtied inode, it'll end up being the first one that
pdflush will try to write out.  sync_sb_inodes does this check:

	/* Was this inode dirtied after sync_sb_inodes was called? */
 	if (time_after(inode->dirtied_when, start))
 		break;

...but now dirtied_when appears to be in the future.  sync_sb_inodes bails
out without attempting to write any dirty inodes.  When this occurs,
pdflush will stop writing out inodes for this superblock.  Nothing can
unwedge it until jiffies moves out of the problematic window.

This patch fixes this problem by changing the checks against dirtied_when
to also check whether it appears to be in the future.  If it does, then we
consider the value to be far in the past.

This should shrink the problematic window of time to such a small period
(30s) as not to matter.
Signed-off-by: NJeff Layton <jlayton@redhat.com>
Signed-off-by: NWu Fengguang <fengguang.wu@intel.com>
Acked-by: NIan Kent <raven@themaw.net>
Cc: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

filp->f_flags is unsigned, so use that type for the local copy.

Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

clear_inode() will switch inode state from I_FREEING to I_CLEAR, and do so
_outside_ of inode_lock.  So any I_FREEING testing is incomplete without a
coupled testing of I_CLEAR.

So add I_CLEAR tests to drop_pagecache_sb(), generic_sync_sb_inodes() and
add_dquot_ref().

Masayoshi MIZUMA discovered the bug in drop_pagecache_sb() and Jan Kara
reminds fixing the other two cases.

Masayoshi MIZUMA has a nice panic flow:

=====================================================================
            [process A]               |        [process B]
 |                                    |
 |    prune_icache()                  | drop_pagecache()
 |      spin_lock(&inode_lock)        |   drop_pagecache_sb()
 |      inode->i_state |= I_FREEING;  |       |
 |      spin_unlock(&inode_lock)      |       V
 |          |                         |     spin_lock(&inode_lock)
 |          V                         |         |
 |      dispose_list()                |         |
 |        list_del()                  |         |
 |        clear_inode()               |         |
 |          inode->i_state = I_CLEAR  |         |
 |            |                       |         V
 |            |                       |      if (inode->i_state & (I_FREEING|I_WILL_FREE))
 |            |                       |              continue;           <==== NOT MATCH
 |            |                       |
 |            |                       | (DANGER from here on! Accessing disposing inode!)
 |            |                       |
 |            |                       |      __iget()
 |            |                       |        list_move() <===== PANIC on poisoned list !!
 V            V                       |
(time)
=====================================================================
Reported-by: NMasayoshi MIZUMA <m.mizuma@jp.fujitsu.com>
Reviewed-by: NJan Kara <jack@suse.cz>
Signed-off-by: NWu Fengguang <fengguang.wu@intel.com>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix a number of issues with the per-MM VMA patch:

 (1) Make mmap_pages_allocated an atomic_long_t, just in case this is used on
     a NOMMU system with more than 2G pages.  Makes no difference on a 32-bit
     system.

 (2) Report vma->vm_pgoff * PAGE_SIZE as a 64-bit value, not a 32-bit value,
     lest it overflow.

 (3) Move the allocation of the vm_area_struct slab back for fork.c.

 (4) Use KMEM_CACHE() for both vm_area_struct and vm_region slabs.

 (5) Use BUG_ON() rather than if () BUG().

 (6) Make the default validate_nommu_regions() a static inline rather than a
     #define.

 (7) Make free_page_series()'s objection to pages with a refcount != 1 more
     informative.

 (8) Adjust the __put_nommu_region() banner comment to indicate that the
     semaphore must be held for writing.

 (9) Limit the number of warnings about munmaps of non-mmapped regions.
Reported-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Cc: Greg Ungerer <gerg@snapgear.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

nvidiafb recognizes geforcego 7300 chip as mobile
Signed-off-by: NSergey Senozhatsky <sergey.senozhatsky@mail.by>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This fixes a build failure with generic debug pagealloc:

  mm/debug-pagealloc.c: In function 'set_page_poison':
  mm/debug-pagealloc.c:8: error: 'struct page' has no member named 'debug_flags'
  mm/debug-pagealloc.c: In function 'clear_page_poison':
  mm/debug-pagealloc.c:13: error: 'struct page' has no member named 'debug_flags'
  mm/debug-pagealloc.c: In function 'page_poison':
  mm/debug-pagealloc.c:18: error: 'struct page' has no member named 'debug_flags'
  mm/debug-pagealloc.c: At top level:
  mm/debug-pagealloc.c:120: error: redefinition of 'kernel_map_pages'
  include/linux/mm.h:1278: error: previous definition of 'kernel_map_pages' was here
  mm/debug-pagealloc.c: In function 'kernel_map_pages':
  mm/debug-pagealloc.c:122: error: 'debug_pagealloc_enabled' undeclared (first use in this function)

by fixing

 - debug_flags should be in struct page
 - define DEBUG_PAGEALLOC config option for all architectures
Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
Reported-by: NAlexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

"struct tty_driver *" lies in m->private not in v which is
SEQ_TOKEN_START which is 1 which is enough to trigger NULL dereference
next line:

	BUG: unable to handle kernel NULL pointer dereference at 000000ad
	IP: [<c040d689>] uart_proc_show+0xe/0x2b0

Noticed by Linus.
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6: (29 commits)
  [IA64] BUG to BUG_ON changes
  [IA64] Fix typo/thinko in arch/ia64/sn/kernel/sn2/sn2_smp.c
  ia64: remove some warnings.
  ia64/xen: fix the link error.
  ia64/pv_ops/bp/xen: implemented binary patchable pv_cpu_ops.
  ia64/pv_ops/binary patch: define paravirt_dv_serialize_data() and suppress false positive warning.
  ia64/pv_ops/bp/module: support binary patching for kernel module.
  ia64/pv_ops: implement binary patching optimization for native.
  ia64/pv_op/binarypatch: add helper functions to support binary patching for paravirt_ops.
  ia64/pv_ops/xen/gate.S: xen gate page paravirtualization
  ia64/pv_ops: paravirtualize gate.S.
  ia64/pv_ops: move down __kernel_syscall_via_epc.
  ia64/pv_ops/xen: define xen specific gate page.
  ia64/pv_ops: gate page paravirtualization.
  ia64/pv_ops/xen/pv_time_ops: implement sched_clock.
  ia64/pv_ops/pv_time_ops: add sched_clock hook.
  ia64/pv_ops/xen: paravirtualize read/write ar.itc and ar.itm
  ia64/pv_ops: paravirtualize mov = ar.itc.
  ia64/pv_ops/pvchecker: support mov = ar.itc paravirtualization
  ia64/pv_ops: paravirtualize fsys.S.
  ...

Merge branch 'x86-setup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-setup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, setup: guard against pre-ACPI 3 e820 code not updating %ecx

Commit 64ef8957 ("qeth: remove EDDP")
removed the qeth_core_offl.[hc] files, but ended up doing so by just
patching them to zero size, rather than removing them properly.

Actually remove the files.
Reported-by: NAndrew Price <andy@andrewprice.me.uk>
Cc: Frank Blaschka <frank.blaschka@de.ibm.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Impact: BIOS bug safety

For pre-ACPI 3 BIOSes, pre-initialize the end of the e820 buffer just
in case the BIOS returns an unchanged %ecx but without actually
touching the ACPI 3 extended flags field.
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

* 'x86/setup' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, setup: ACPI 3, BIOS workaround for E820-probing code
  x86, setup: preemptively save/restore edi and ebp around INT 15 E820
  x86, setup: mark %esi as clobbered in E820 BIOS call

* 'for-linus' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6: (58 commits)
  SUNRPC: Ensure IPV6_V6ONLY is set on the socket before binding to a port
  NSM: Fix unaligned accesses in nsm_init_private()
  NFS: Simplify logic to compare socket addresses in client.c
  NFS: Start PF_INET6 callback listener only if IPv6 support is available
  lockd: Start PF_INET6 listener only if IPv6 support is available
  SUNRPC: Remove CONFIG_SUNRPC_REGISTER_V4
  SUNRPC: rpcb_register() should handle errors silently
  SUNRPC: Simplify kernel RPC service registration
  SUNRPC: Simplify svc_unregister()
  SUNRPC: Allow callers to pass rpcb_v4_register a NULL address
  SUNRPC: rpcbind actually interprets r_owner string
  SUNRPC: Clean up address type casts in rpcb_v4_register()
  SUNRPC: Don't return EPROTONOSUPPORT in svc_register()'s helpers
  SUNRPC: Use IPv4 loopback for registering AF_INET6 kernel RPC services
  SUNRPC: Set IPV6ONLY flag on PF_INET6 RPC listener sockets
  NFS: Revert creation of IPv6 listeners for lockd and NFSv4 callbacks
  SUNRPC: Remove @family argument from svc_create() and svc_create_pooled()
  SUNRPC: Change svc_create_xprt() to take a @family argument
  SUNRPC: svc_setup_socket() gets protocol family from socket
  SUNRPC: Pass a family argument to svc_register()
  ...

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (33 commits)
  ext4: Regularize mount options
  ext4: fix locking typo in mballoc which could cause soft lockup hangs
  ext4: fix typo which causes a memory leak on error path
  jbd2: Update locking coments
  ext4: Rename pa_linear to pa_type
  ext4: add checks of block references for non-extent inodes
  ext4: Check for an valid i_mode when reading the inode from disk
  ext4: Use WRITE_SYNC for commits which are caused by fsync()
  ext4: Add auto_da_alloc mount option
  ext4: Use struct flex_groups to calculate get_orlov_stats()
  ext4: Use atomic_t's in struct flex_groups
  ext4: remove /proc tuning knobs
  ext4: Add sysfs support
  ext4: Track lifetime disk writes
  ext4: Fix discard of inode prealloc space with delayed allocation.
  ext4: Automatically allocate delay allocated blocks on rename
  ext4: Automatically allocate delay allocated blocks on close
  ext4: add EXT4_IOC_ALLOC_DA_BLKS ioctl
  ext4: Simplify delalloc code by removing mpage_da_writepages()
  ext4: Save stack space by removing fake buffer heads
  ...

Also ensure that we use the protocol family instead of the address
family when calling sock_create_kern().
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

This fixes unaligned accesses in nsm_init_private() when
creating nlm_reboot keys.
Signed-off-by: NMans Rullgard <mans@mansr.com>
Reviewed-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

* git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable:
  Btrfs: try to free metadata pages when we free btree blocks
  Btrfs: add extra flushing for renames and truncates
  Btrfs: make sure btrfs_update_delayed_ref doesn't increase ref_mod
  Btrfs: optimize fsyncs on old files
  Btrfs: tree logging unlink/rename fixes
  Btrfs: Make sure i_nlink doesn't hit zero too soon during log replay
  Btrfs: limit balancing work while flushing delayed refs
  Btrfs: readahead checksums during btrfs_finish_ordered_io
  Btrfs: leave btree locks spinning more often
  Btrfs: Only let very young transactions grow during commit
  Btrfs: Check for a blocking lock before taking the spin
  Btrfs: reduce stack in cow_file_range
  Btrfs: reduce stalls during transaction commit
  Btrfs: process the delayed reference queue in clusters
  Btrfs: try to cleanup delayed refs while freeing extents
  Btrfs: reduce stack usage in some crucial tree balancing functions
  Btrfs: do extent allocation and reference count updates in the background
  Btrfs: don't preallocate metadata blocks during btrfs_search_slot

* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (59 commits)
  ide-floppy: do not complete rq's prematurely
  ide: be able to build pmac driver without IDE built-in
  ide-pmac: IDE cable detection on Apple PowerBook
  ide: inline SELECT_DRIVE()
  ide: turn selectproc() method into dev_select() method (take 5)
  MAINTAINERS: move old ide-{floppy,tape} entries to CREDITS (take 2)
  ide: move data register access out of tf_{read|load}() methods (take 2)
  ide: call {in|out}put_data() methods from tf_{read|load}() methods (take 2)
  ide-io-std: shorten ide_{in|out}put_data()
  ide: rename IDE_TFLAG_IN_[HOB_]FEATURE
  ide: turn set_irq() method into write_devctl() method
  ide: use ATA_HOB
  ide-disk: use ATA_ERR
  ide: add support for CFA specified transfer modes (take 3)
  ide-iops: only clear DMA words on setting DMA mode
  ide: identify data word 53 bit 1 doesn't cover words 62 and 63 (take 3)
  au1xxx-ide: auide_{in|out}sw() should be static
  ide-floppy: use ide_pio_bytes()
  ide-{floppy,tape}: fix padding for PIO transfers
  ide: remove CONFIG_BLK_DEV_IDEDOUBLER config option
  ...

Replace:

	if (test)
		BUG();

with
	BUG_ON(test);
Signed-off-by: NStoyan Gaydarov <stoyboyker@gmail.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>

* 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: (88 commits)
  PCI: fix HT MSI mapping fix
  PCI: don't enable too much HT MSI mapping
  x86/PCI: make pci=lastbus=255 work when acpi is on
  PCI: save and restore PCIe 2.0 registers
  PCI: update fakephp for bus_id removal
  PCI: fix kernel oops on bridge removal
  PCI: fix conflict between SR-IOV and config space sizing
  powerpc/PCI: include pci.h in powerpc MSI implementation
  PCI Hotplug: schedule fakephp for feature removal
  PCI Hotplug: rename legacy_fakephp to fakephp
  PCI Hotplug: restore fakephp interface with complete reimplementation
  PCI: Introduce /sys/bus/pci/devices/.../rescan
  PCI: Introduce /sys/bus/pci/devices/.../remove
  PCI: Introduce /sys/bus/pci/rescan
  PCI: Introduce pci_rescan_bus()
  PCI: do not enable bridges more than once
  PCI: do not initialize bridges more than once
  PCI: always scan child buses
  PCI: pci_scan_slot() returns newly found devices
  PCI: don't scan existing devices
  ...

Fix trivial append-only conflict in Documentation/feature-removal-schedule.txt

sn2_ptc_init() has what looks like a cut-n-paste error. Fix it.
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>

* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6:
  [S390] cio: online_store - trigger recognition for boxed devices
  [S390] cio: disallow online setting of device in transient state
  [S390] cio: introduce notifier for boxed state
  [S390] cio: introduce ccw_device_schedule_sch_unregister
  [S390] cio: wake up on failed recognition
  [S390] fix hypfs build failure
  [PATCH] sysrq: include interrupt.h instead of irq.h

The current logic for dmi matching in efifb does not allow efifb to load
on all hardware that we can dmi match for.

For a real world example, boot with elilo (3.7 or 3.8 vanilla) and on a
Apple (MacBook) and EFI framebuffer driver will not load (you will have no
video).  This specific hardware is efi v1.10, so we have UGA and not GOP.
Without special bootloader magic (i.e.  extra elilo patches for UGA
graphics detection) no screen info will be passed to the kernel and as a
result efifb will not load.

This patch allows the dmi match to happen by moving it to earlier in
efifb_init, and sets the video type (in set_system) so that efifb can load
when we have a valid dmi match and already know the specifics of the
hardware.

Without this patch the efifb driver will fail to load in the event screen
info is not found and passed in by the bootloader, being that we will
never get to look for a dmi match.  A primary reason for matching with dmi
is because not all bootloaders detect the video info properly.  The
solution is that in the event of a dmi match, we should set
screen_info.orig_video_isVGA.  Most bootloaders fail to set screen info on
Apple hardware, and this is a big problem for people who use Apple
hardware.

Tested on a MacBook SantaRosa with elilo-3.8 (vanilla) and resolves the
issue, the dmi match now works, EFI framebuffer now loads and video works.
Signed-off-by: NBrian Maly <bmaly@redhat.com>
Acked-by: NHuang Ying <ying.huang@intel.com>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Cc: Chandramouli Narayanan <mouli@linux.intel.com>
Acked-by: NPeter Jones <pjones@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Remove Kconfig option for tridentfb acceleration.  The acceleration can be
switched off with modules "noaccel" parameter.

The acceleration for Trident chips was fixed in the 2.6.27 kernel.

Also, add CyberXXX and CyberBlade names to Kconfig option's name.  It should
make easier to find the tridentfb choice for cyblafb driver's users.  The
cyblafb driver has been replaced by the tridentfb driver.
Signed-off-by: NKrzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Save one fifo entry on cursor enabling and disabling.

Save another fifo entry for FB_CUR_SETPOS operation by removing redundant one.
Signed-off-by: NKrzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

A hardware cursor is left enabled in the fb_set_par() which is called when a
new console is created.  This is inconsistent with software cursor's
behaviour.

Also, this makes a hardware cursor always visible in the Xfbdev (Xorg kdrive)
server.
Signed-off-by: NKrzysztof Helt <krzysztof.h1@wp.pl>
Cc: Risto Suominen <risto.suominen@gmail.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Remove mutex from the nvidiafb_open/nvidiafb_release functions as these
operations are mutexed at fb layer.
Signed-off-by: NAlessio Igor Bogani <abogani@texware.it>
Cc: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add suspend/resume for the Acer Travelmate 290D/292LMi with the following
graphic-chip:

01:00.0 VGA compatible controller [0300]: ATI Technologies Inc RV350
[Mobility Radeon 9600 M10] [1002:4e50] (prog-if 00 [VGA controller])
	Subsystem: Acer Incorporated [ALI] TravelMate 290 [1025:005a]
	Flags: bus master, 66MHz, medium devsel, latency 128, IRQ 10
	Memory at a8000000 (32-bit, prefetchable) [size=128M]
	I/O ports at c100 [size=256]
	Memory at e0010000 (32-bit, non-prefetchable) [size=64K]
	[virtual] Expansion ROM at a0000000 [disabled] [size=128K]
	Capabilities: [58] AGP version 2.0
	Capabilities: [50] Power Management version 2
	Kernel driver in use: radeonfb
	Kernel modules: radeonfb
Signed-off-by: NWolfgang Kroener <lkml@azog.de>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The blank operation should receive FB_BLANK_POWERDOWN, not VESA_POWERDOWN.
Signed-off-by: NFelipe Contreras <felipe.contreras@nokia.com>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Andrea Righi <righi.andrea@gmail.com>
Acked-by: NTrilok Soni <soni.trilok@gmail.com>
Cc: Imre Deak <imre.deak@solidboot.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

If the vbemode option is used, uvesafb calls fb_get_mode() without first
setting the resolution in info->var.  This results in a division by zero
in fb_get_mode(), as evidenced e.g.  in [1].  Fix this by ensuring the
info->var structure is populated before fb_get_mode() is called.

[1] http://bugzilla.kernel.org/show_bug.cgi?id=11661#c37Signed-off-by: NMichal Januszewski <spock@gentoo.org>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

A tridentfb driver has all the functionality of the cyblafb driver without
the bugs of the latter.

Changes to the tridentfb driver:

- FBINFO_READS_FAST added to the tridentfb.  The cyblafb used a blitter
  for scrolling which is faster than color expansion on Cyberblade
  chipsets.  The blitter is slower on a discrete Blade3D core.  Use the
  blitter for scrolling in the tridentfb only for integrated Blade3D
  cores.  Now, scrolling speed is about equal for the tridentfb and the
  cyblafb.

- a copyright notice addition is done on request of Jani Monoses (the
  first author of the tridentfb).

Tested on AGP Blade3D card and PCChips
M787CLR motherboard: VIA C3 cpu +
VT8601 north  bridge (aka Cyberblade/i1).
Signed-off-by: NKrzysztof Helt <krzysztof.h1@wp.pl>
Cc: "Jani Monoses" <jani@ubuntu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>