- 12 5月, 2011 26 次提交
-
-
由 Linus Torvalds 提交于
* 'fixes' of master.kernel.org:/home/rmk/linux-2.6-arm: ARM: 6870/1: The mandatory barrier rmb() must be a dsb() in for device accesses ARM: 6892/1: handle ptrace requests to change PC during interrupted system calls ARM: 6890/1: memmap: only free allocated memmap entries when using SPARSEMEM ARM: zImage: the page table memory must be considered before relocation ARM: zImage: make sure not to relocate on top of the relocation code ARM: zImage: Fix bad SP address after relocating kernel ARM: zImage: make sure the stack is 64-bit aligned ARM: RiscPC: acornfb: fix section mismatches ARM: RiscPC: etherh: fix section mismatches
-
由 Catalin Marinas 提交于
Since mandatory barriers may be used (explicitly or implicitly via readl etc.) to ensure the ordering between Device and Normal memory accesses, a DMB is not enough. This patch converts it to a DSB. Cc: Colin Cross <ccross@android.com> Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Arnd Bergmann 提交于
GDB's interrupt.exp test cases currenly fail on ARM. The problem is how do_signal handled restarting interrupted system calls: The entry.S assembler code determines that we come from a system call; and that information is passed as "syscall" parameter to do_signal. That routine then calls get_signal_to_deliver [*] and if a signal is to be delivered, calls into handle_signal. If a system call is to be restarted either after the signal handler returns, or if no handler is to be called in the first place, the PC is updated after the get_signal_to_deliver call, either in handle_signal (if we have a handler) or at the end of do_signal (otherwise). Now the problem is that during [*], the call to get_signal_to_deliver, a ptrace intercept may happen. During this intercept, the debugger may change registers, including the PC. This is done by GDB if it wants to execute an "inferior call", i.e. the execution of some code in the debugged program triggered by GDB. To this purpose, GDB will save all registers, allocate a stack frame, set up PC and arguments as appropriate for the call, and point the link register to a dummy breakpoint instruction. Once the process is restarted, it will execute the call and then trap back to the debugger, at which point GDB will restore all registers and continue original execution. This generally works fine. However, now consider what happens when GDB attempts to do exactly that while the process was interrupted during execution of a to-be- restarted system call: do_signal is called with the syscall flag set; it calls get_signal_to_deliver, at which point the debugger takes over and changes the PC to point to a completely different place. Now get_signal_to_deliver returns without a signal to deliver; but now do_signal decides it should be restarting a system call, and decrements the PC by 2 or 4 -- so it now points to 2 or 4 bytes before the function GDB wants to call -- which leads to a subsequent crash. To fix this problem, two things need to be supported: - do_signal must be able to recognize that get_signal_to_deliver changed the PC to a different location, and skip the restart-syscall sequence - once the debugger has restored all registers at the end of the inferior call sequence, do_signal must recognize that *now* it needs to restart the pending system call, even though it was now entered from a breakpoint instead of an actual svc instruction This set of issues is solved on other platforms, usually by one of two mechanisms: - The status information "do_signal is handling a system call that may need restarting" is itself carried in some register that can be accessed via ptrace. This is e.g. on Intel the "orig_eax" register; on Sparc the kernel defines a magic extra bit in the flags register for this purpose. This allows GDB to manage that state: reset it when doing an inferior call, and restore it after the call is finished. - On s390, do_signal transparently handles this problem without requiring GDB interaction, by performing system call restarting in the following way: first, adjust the PC as necessary for restarting the call. Then, call get_signal_to_deliver; and finally just continue execution at the PC. This way, if GDB does not change the PC, everything is as before. If GDB *does* change the PC, execution will simply continue there -- and once GDB restores the PC it saved at that point, it will automatically point to the *restarted* system call. (There is the minor twist how to handle system calls that do *not* need restarting -- do_signal will undo the PC change in this case, after get_signal_to_deliver has returned, and only if ptrace did not change the PC during that call.) Because there does not appear to be any obvious register to carry the syscall-restart information on ARM, we'd either have to introduce a new artificial ptrace register just for that purpose, or else handle the issue transparently like on s390. The patch below implements the second option; using this patch makes the interrupt.exp test cases pass on ARM, with no regression in the GDB test suite otherwise. Cc: patches@linaro.org Signed-off-by: NUlrich Weigand <ulrich.weigand@linaro.org> Signed-off-by: NArnd Bergmann <arnd.bergmann@linaro.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Will Deacon 提交于
The SPARSEMEM code allocates memmap entries only for sections which are present (i.e. those which contain some valid memory). The membank checks in free_unused_memmap do not take this into account and can incorrectly attempt to free memory which is not allocated, resulting in a BUG() in the bootmem code. However, if memory is configured as follows: |<----section---->|<----hole---->|<----section---->| +--------+--------+--------------+--------+--------+ | bank 0 | unused | | bank 1 | unused | +--------+--------+--------------+--------+--------+ where a bank only occupies part of a section, the memmap allocated for the remainder of the section *can* be freed. This patch modifies the checks in free_unused_memmap so that only valid memmap entries are considered for removal. Acked-by: NCatalin Marinas <catalin.marinas@arm.com> Signed-off-by: NWill Deacon <will.deacon@arm.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: ceph: do not use i_wrbuffer_ref as refcount for Fb cap ceph: fix list_add in ceph_put_snap_realm ceph: print debug message before put mds session
-
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6由 Linus Torvalds 提交于
* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm/radeon/nouveau: fix build regression on alpha due to Xen changes. drm/radeon/kms: fix cayman acceleration drm/radeon: fix cayman struct accessors.
-
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: mfd: Fix for the TWL4030 PM sleep/wakeup sequence mfd: Fix asic3 build error mfd: Fixed gpio polarity of omap-usb gpio USB-phy reset
-
git://git390.marist.edu/pub/scm/linux-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: [S390] fix alloc_pgste check in init_new_context [S390] oprofile: fix min/max interval query checks [S390] replace diag10() with diag10_range() function [S390] disassembler: handle b280/spp instruction [S390] kernel: Initialize register 14 when starting new CPU [S390] dasd: prevent IO error during reserve/release loop [S390] sclp/memory hotplug: fix initial usecount of increments
-
由 Linus Torvalds 提交于
This reverts commit f21ca5ff. Quoth Gustavo F. Padovan: "Commit f21ca5ff can cause a NULL dereference if we call shutdown in a bluetooth SCO socket and doesn't wait the shutdown completion to call close(). Please revert it. I may have a fix for it soon, but we don't have time anymore, so revert is the way to go. ;)" Requested-by: NGustavo F. Padovan <padovan@profusion.mobi> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6由 Linus Torvalds 提交于
* 'pm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6: PM / Hibernate: Fix ioctl SNAPSHOT_S2RAM PM / Hibernate: Make snapshot_release() restore GFP mask PM: Fix warning in pm_restrict_gfp_mask() during SNAPSHOT_S2RAM ioctl
-
由 Mel Gorman 提交于
include/linux/gfp.h and include/trace/events/gfpflags.h are out of sync. When tracing is enabled, certain flags are not recognised and the text output is less useful as a result. Add the missing flags. Signed-off-by: NMel Gorman <mgorman@suse.de> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Hugh Dickins 提交于
Testing the shmem_swaplist replacements for igrab() revealed another bug: writes to /dev/loop0 on a tmpfs file which fills its filesystem were sometimes failing with "Buffer I/O error"s. These came from ENOSPC failures of shmem_getpage(), when racing with swapoff: the same could happen when racing with another shmem_getpage(), pulling the page in from swap in between our find_lock_page() and our taking the info->lock (though not in the single-threaded loop case). This is unacceptable, and surprising that I've not noticed it before: it dates back many years, but (presumably) was made a lot easier to reproduce in 2.6.36, which sited a page preallocation in the race window. Fix it by rechecking the page cache before settling on an ENOSPC error. Signed-off-by: NHugh Dickins <hughd@google.com> Cc: Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: <stable@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Hugh Dickins 提交于
The use of igrab() in swapoff's shmem_unuse_inode() is just as vulnerable to umount as that in shmem_writepage(). Fix this instance by extending the protection of shmem_swaplist_mutex right across shmem_unuse_inode(): while it's on the list, the inode cannot be evicted (and the filesystem cannot be unmounted) without shmem_evict_inode() taking that mutex to remove it from the list. But since shmem_writepage() might take that mutex, we should avoid making memory allocations or memcg charges while holding it: prepare them at the outer level in shmem_unuse(). When mem_cgroup_cache_charge() was originally placed, we didn't know until that point that the page from swap was actually a shmem page; but nowadays it's noted in the swap_map, so we're safe to charge upfront. For the radix_tree, do as is done in shmem_getpage(): preload upfront, but don't pin to the cpu; so we make a habit of refreshing the node pool, but might dip into GFP_NOWAIT reserves on occasion if subsequently preempted. With the allocation and charge moved out from shmem_unuse_inode(), we can also hold index map and info->lock over from finding the entry. Signed-off-by: NHugh Dickins <hughd@google.com> Cc: Konstantin Khlebnikov <khlebnikov@openvz.org> Cc: <stable@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Hugh Dickins 提交于
Konstanin Khlebnikov reports that a dangerous race between umount and shmem_writepage can be reproduced by this script: for i in {1..300} ; do mkdir $i while true ; do mount -t tmpfs none $i dd if=/dev/zero of=$i/test bs=1M count=$(($RANDOM % 100)) umount $i done & done on a 6xCPU node with 8Gb RAM: kernel very unstable after this accident. =) Kernel log: VFS: Busy inodes after unmount of tmpfs. Self-destruct in 5 seconds. Have a nice day... WARNING: at lib/list_debug.c:53 __list_del_entry+0x8d/0x98() list_del corruption. prev->next should be ffff880222fdaac8, but was (null) Pid: 11222, comm: mount.tmpfs Not tainted 2.6.39-rc2+ #4 Call Trace: warn_slowpath_common+0x80/0x98 warn_slowpath_fmt+0x41/0x43 __list_del_entry+0x8d/0x98 evict+0x50/0x113 iput+0x138/0x141 ... BUG: unable to handle kernel paging request at ffffffffffffffff IP: shmem_free_blocks+0x18/0x4c Pid: 10422, comm: dd Tainted: G W 2.6.39-rc2+ #4 Call Trace: shmem_recalc_inode+0x61/0x66 shmem_writepage+0xba/0x1dc pageout+0x13c/0x24c shrink_page_list+0x28e/0x4be shrink_inactive_list+0x21f/0x382 ... shmem_writepage() calls igrab() on the inode for the page which came from page reclaim, to add it later into shmem_swaplist for swapoff operation. This igrab() can race with super-block deactivating process: shrink_inactive_list() deactivate_super() pageout() tmpfs_fs_type->kill_sb() shmem_writepage() kill_litter_super() generic_shutdown_super() evict_inodes() igrab() atomic_read(&inode->i_count) skip-inode iput() if (!list_empty(&sb->s_inodes)) printk("VFS: Busy inodes after... This igrap-iput pair was added in commit 1b1b32f2 "tmpfs: fix shmem_swaplist races" based on incorrect assumptions: igrab() protects the inode from concurrent eviction by deletion, but it does nothing to protect it from concurrent unmounting, which goes ahead despite the raised i_count. So this use of igrab() was wrong all along, but the race made much worse in 2.6.37 when commit 63997e98 "split invalidate_inodes()" replaced two attempts at invalidate_inodes() by a single evict_inodes(). Konstantin posted a plausible patch, raising sb->s_active too: I'm unsure whether it was correct or not; but burnt once by igrab(), I am sure that we don't want to rely more deeply upon externals here. Fix it by adding the inode to shmem_swaplist earlier, while the page lock on page in page cache still secures the inode against eviction, without artifically raising i_count. It was originally added later because shmem_unuse_inode() is liable to remove an inode from the list while it's unswapped; but we can guard against that by taking spinlock before dropping mutex. Reported-by: NKonstantin Khlebnikov <khlebnikov@openvz.org> Signed-off-by: NHugh Dickins <hughd@google.com> Tested-by: NKonstantin Khlebnikov <khlebnikov@openvz.org> Cc: <stable@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andi Kleen 提交于
Commit dde79e00 ("page_cgroup: reduce allocation overhead for page_cgroup array for CONFIG_SPARSEMEM") added a regression that the memory cgroup data structures all end up in node 0 because the first attempt at allocating them would not pass in a node hint. Since the initialization runs on CPU #0 it would all end up node 0. This is a problem on large memory systems, where node 0 would lose a lot of memory. Change the alloc_pages_exact() to alloc_pages_exact_nid(). This will still fall back to other nodes if not enough memory is available. [ RED-PEN: right now it would fall back first before trying vmalloc_node. Probably not the best strategy ... But I left it like that for now. ] Signed-off-by: NAndi Kleen <ak@linux.intel.com> Reported-by: Doug Nelson Cc: David Rientjes <rientjes@google.com> Reviewed-by: NMichal Hocko <mhocko@suse.cz> Cc: Dave Hansen <dave@linux.vnet.ibm.com> Acked-by: NBalbir Singh <balbir@linux.vnet.ibm.com> Acked-by: NJohannes Weiner <hannes@cmpxchg.org> Reviewed-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andi Kleen 提交于
Add a alloc_pages_exact_nid() that allocates on a specific node. The naming is quite broken, but fixing that would need a larger renaming action. [akpm@linux-foundation.org: coding-style fixes] [akpm@linux-foundation.org: tweak comment] Signed-off-by: NAndi Kleen <ak@linux.intel.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Dave Hansen <dave@linux.vnet.ibm.com> Cc: David Rientjes <rientjes@google.com> Acked-by: NJohannes Weiner <hannes@cmpxchg.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Harry Wei 提交于
Take alphabetical orders for MAINTAINERS file. Signed-off-by: NHarry Wei <harryxiyou@gmail.com> Cc: Joe Perches <joe@perches.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Yinghai Lu 提交于
Stefan found nobootmem does not work on his system that has only 8M of RAM. This causes an early panic: BIOS-provided physical RAM map: BIOS-88: 0000000000000000 - 000000000009f000 (usable) BIOS-88: 0000000000100000 - 0000000000840000 (usable) bootconsole [earlyser0] enabled Notice: NX (Execute Disable) protection missing in CPU or disabled in BIOS! DMI not present or invalid. last_pfn = 0x840 max_arch_pfn = 0x100000 init_memory_mapping: 0000000000000000-0000000000840000 8MB LOWMEM available. mapped low ram: 0 - 00840000 low ram: 0 - 00840000 Zone PFN ranges: DMA 0x00000001 -> 0x00001000 Normal empty Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000001 -> 0x0000009f 0: 0x00000100 -> 0x00000840 BUG: Int 6: CR2 (null) EDI c034663c ESI (null) EBP c0329f38 ESP c0329ef4 EBX c0346380 EDX 00000006 ECX ffffffff EAX fffffff4 err (null) EIP c0353191 CS c0320060 flg 00010082 Stack: (null) c030c533 000007cd (null) c030c533 00000001 (null) (null) 00000003 0000083f 00000018 00000002 00000002 c0329f6c c03534d6 (null) (null) 00000100 00000840 (null) c0329f64 00000001 00001000 (null) Pid: 0, comm: swapper Not tainted 2.6.36 #5 Call Trace: [<c02e3707>] ? 0xc02e3707 [<c035e6e5>] 0xc035e6e5 [<c0353191>] ? 0xc0353191 [<c03534d6>] 0xc03534d6 [<c034f1cd>] 0xc034f1cd [<c034a824>] 0xc034a824 [<c03513cb>] ? 0xc03513cb [<c0349432>] 0xc0349432 [<c0349066>] 0xc0349066 It turns out that we should ignore the low limit of 16M. Use alloc_bootmem_node_nopanic() in this case. [akpm@linux-foundation.org: less mess] Signed-off-by: NYinghai LU <yinghai@kernel.org> Reported-by: NStefan Hellermann <stefan@the2masters.de> Tested-by: NStefan Hellermann <stefan@the2masters.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@linux.intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: <stable@kernel.org> [2.6.34+] Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Minchan Kim 提交于
The lru_deactivate_fn should not move page which in on unevictable lru into inactive list. Otherwise, we can meet BUG when we use isolate_lru_pages as __isolate_lru_page could return -EINVAL. Reported-by: NYing Han <yinghan@google.com> Tested-by: NYing Han <yinghan@google.com> Signed-off-by: NMinchan Kim <minchan.kim@gmail.com> Reviewed-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Reviewed-by: Rik van Riel<riel@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Ben Dooks 提交于
The driver is not balancing set_irq and disable_irq_wake() calls, so ensure that it keeps track of whether the wake is enabled. The fixes the following error on S3C6410 devices: WARNING: at kernel/irq/manage.c:382 set_irq_wake+0x84/0xec() Unbalanced IRQ 92 wake disable Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: <stable@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Rafael J. Wysocki 提交于
The SNAPSHOT_S2RAM ioctl used for implementing the feature allowing one to suspend to RAM after creating a hibernation image is currently broken, because it doesn't clear the "ready" flag in the struct snapshot_data object handled by it. As a result, the SNAPSHOT_UNFREEZE doesn't work correctly after SNAPSHOT_S2RAM has returned and the user space hibernate task cannot thaw the other processes as appropriate. Make SNAPSHOT_S2RAM clear data->ready to fix this problem. Tested-by: NAlexandre Felipe Muller de Souza <alexandrefm@mandriva.com.br> Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl> Cc: stable@kernel.org
-
由 Rafael J. Wysocki 提交于
If the process using the hibernate user space interface closes /dev/snapshot after creating a hibernation image without thawing tasks, snapshot_release() should call pm_restore_gfp_mask() to restore the GFP mask used before the creation of the image. Make that happen. Tested-by: NAlexandre Felipe Muller de Souza <alexandrefm@mandriva.com.br> Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl> Cc: stable@kernel.org
-
由 Rafael J. Wysocki 提交于
A warning is printed by pm_restrict_gfp_mask() while the SNAPSHOT_S2RAM ioctl is being executed after creating a hibernation image, because pm_restrict_gfp_mask() has been called once already before the image creation and suspend_devices_and_enter() calls it once again. This happens after commit 452aa699 (mm/pm: force GFP_NOIO during suspend/hibernation and resume). To avoid this issue, move pm_restrict_gfp_mask() and pm_restore_gfp_mask() from suspend_devices_and_enter() to its caller in kernel/power/suspend.c. Reported-by: NAlexandre Felipe Muller de Souza <alexandrefm@mandriva.com.br> Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl> Cc: stable@kernel.org
-
由 Henry C Chang 提交于
We increments i_wrbuffer_ref when taking the Fb cap. This breaks the dirty page accounting and causes looping in __ceph_do_pending_vmtruncate, and ceph client hangs. This bug can be reproduced occasionally by running blogbench. Add a new field i_wb_ref to inode and dedicate it to Fb reference counting. Signed-off-by: NHenry C Chang <henry.cy.chang@gmail.com> Signed-off-by: NSage Weil <sage@newdream.net>
-
由 Henry C Chang 提交于
Signed-off-by: NHenry C Chang <henry.cy.chang@gmail.com> Signed-off-by: NSage Weil <sage@newdream.net>
-
由 Henry C Chang 提交于
The mds session, s, could be freed during ceph_put_mds_session. Move dout before ceph_put_mds_session. Signed-off-by: NHenry C Chang <henry.cy.chang@gmail.com> Signed-off-by: NSage Weil <sage@newdream.net>
-
- 11 5月, 2011 14 次提交
-
-
由 Lesly A M 提交于
Only configure sleep script when the flag is TWL4030_SLEEP_SCRIPT. Adding the missing brackets for fixing the issue. Signed-off-by: NLesly A M <leslyam@ti.com> Cc: Nishanth Menon <nm@ti.com> Cc: David Derrick <dderrick@ti.com> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
由 Axel Lin 提交于
Fix below compile error: CC drivers/mfd/asic3.o drivers/mfd/asic3.c: In function 'asic3_irq_demux': drivers/mfd/asic3.c:147: error: 'irq_data' undeclared (first use in this function) drivers/mfd/asic3.c:147: error: (Each undeclared identifier is reported only once drivers/mfd/asic3.c:147: error: for each function it appears in.) Signed-off-by: NAxel Lin <axel.lin@gmail.com> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
由 Juergen Kilb 提交于
With commit 19403165 a main part of ehci-omap.c moved to drivers/mfd/omap-usb-host.c created by commit 17cdd29d. Due to this reorganisation the polarity used to reset the external USB phy changed and USB host doesn't recognize any devices. Signed-off-by: NJuergen Kilb <J.Kilb@phytec.de> Acked-by: NFelipe Balbi <balbi@ti.com> Tested-by: NSteve Sakoman <steve@sakoman.com> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
由 Dave Airlie 提交于
The Xen changes were using DMA_ERROR_CODE which isn't defined on a few platforms, however we reverted the Xen patch that caused use to try and use this code path earlier in 2.6.39 cycle, so for now lets just force the code to never take this path and allow it to build again on alpha. The proper long term answer is probably to store if the dma_addr has been assigned to alongside the dma_addr in the higher level code, though I think Thomas wanted to rewrite most of this anyways properly. Acked-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
The TCC disable setup was incorrect. This prevents the GPU from hanging when draw commands are issued. Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Dave Airlie 提交于
We are accessing totally the wrong struct in this case, and putting uninitialised values into the GPU, which it doesn't like unsurprisingly. Signed-off-by: NDave Airlie <airlied@redhat.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (27 commits) slcan: fix ldisc->open retval net/usb: mark LG VL600 LTE modem ethernet interface as WWAN xfrm: Don't allow esn with disabled anti replay detection xfrm: Assign the inner mode output function to the dst entry net: dev_close() should check IFF_UP vlan: fix GVRP at dismantle time netfilter: revert a2361c87 netfilter: IPv6: fix DSCP mangle code netfilter: IPv6: initialize TOS field in REJECT target module IPVS: init and cleanup restructuring IPVS: Change of socket usage to enable name space exit. netfilter: ebtables: only call xt_compat_add_offset once per rule netfilter: fix ebtables compat support netfilter: ctnetlink: fix timestamp support for new conntracks pch_gbe: support ML7223 IOH PCH_GbE : Fixed the issue of checksum judgment PCH_GbE : Fixed the issue of collision detection NET: slip, fix ldisc->open retval be2net: Fixed bugs related to PVID. ehea: fix wrongly reported speed and port ...
-
由 David Rientjes 提交于
This reverts commit 4a5fa359, which did not allow SLUB to be used on architectures that use DISCONTIGMEM without compiling NUMA support without CONFIG_BROKEN also set. The slub panic that it was intended to prevent is addressed by d9b41e0b ("[PARISC] set memory ranges in N_NORMAL_MEMORY when onlined") on parisc so there is no further slub issues with such a configuration. The reverts allows SLUB now to be used on such architectures since there haven't been any reports of additional errors. Cc: James Bottomley <James.Bottomley@suse.de> Signed-off-by: NDavid Rientjes <rientjes@google.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
-
由 Oliver Hartkopp 提交于
TTY layer expects 0 if the ldisc->open operation succeeded. Reported-by: NMatvejchikov Ilya <matvejchikov@gmail.com> Signed-off-by: NOliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dan Williams 提交于
Like other mobile broadband device ethernet interfaces, mark the LG VL600 with the 'wwan' devtype so userspace knows it needs additional configuration via the AT port before the interface can be used. Signed-off-by: NDan Williams <dcbw@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Steffen Klassert 提交于
Unlike the standard case, disabled anti replay detection needs some nontrivial extra treatment on ESN. RFC 4303 states: Note: If a receiver chooses to not enable anti-replay for an SA, then the receiver SHOULD NOT negotiate ESN in an SA management protocol. Use of ESN creates a need for the receiver to manage the anti-replay window (in order to determine the correct value for the high-order bits of the ESN, which are employed in the ICV computation), which is generally contrary to the notion of disabling anti-replay for an SA. So return an error if an ESN state with disabled anti replay detection is inserted for now and add the extra treatment later if we need it. Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Steffen Klassert 提交于
As it is, we assign the outer modes output function to the dst entry when we create the xfrm bundle. This leads to two problems on interfamily scenarios. We might insert ipv4 packets into ip6_fragment when called from xfrm6_output. The system crashes if we try to fragment an ipv4 packet with ip6_fragment. This issue was introduced with git commit ad0081e4 (ipv6: Fragment locally generated tunnel-mode IPSec6 packets as needed). The second issue is, that we might insert ipv4 packets in netfilter6 and vice versa on interfamily scenarios. With this patch we assign the inner mode output function to the dst entry when we create the xfrm bundle. So xfrm4_output/xfrm6_output from the inner mode is used and the right fragmentation and netfilter functions are called. We switch then to outer mode with the output_finish functions. Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Commit 44345724 (factorize sync-rcu call in unregister_netdevice_many) mistakenly removed one test from dev_close() Following actions trigger a BUG : modprobe bonding modprobe dummy ifconfig bond0 up ifenslave bond0 dummy0 rmmod dummy dev_close() must not close a non IFF_UP device. With help from Frank Blaschka and Einar EL Lueck Reported-by: NFrank Blaschka <blaschka@linux.vnet.ibm.com> Reported-by: NEinar EL Lueck <ELELUECK@de.ibm.com> Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-