- 20 7月, 2007 33 次提交
-
-
由 David Hubbard 提交于
Add description for the W83627DHG chip to Kconfig. Signed-off-by: NDavid Hubbard <david.c.hubbard@gmail.com> Signed-off-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NMark M. Hoffman <mhoffman@lightlink.com>
-
由 Adrian Bunk 提交于
coretemp_device_remove() can become static. Signed-off-by: NAdrian Bunk <bunk@stusta.de> Acked-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NMark M. Hoffman <mhoffman@lightlink.com>
-
由 Hans-Jürgen Koch 提交于
This patch adds support for the LM93 hardware monitoring chip. Signed-off-by: NHans J. Koch <hjk@linutronix.de> Signed-off-by: NMark M. Hoffman <mhoffman@lightlink.com>
-
由 Jean Delvare 提交于
The documentation of the pwmN_enable interface file is not very clear, and has been confusing several driver authors already. Make it clearer. Signed-off-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NMark M. Hoffman <mhoffman@lightlink.com>
-
由 Jean Delvare 提交于
Also protects ourselves against a possible division by zero. Signed-off-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NMark M. Hoffman <mhoffman@lightlink.com>
-
由 Hans de Goede 提交于
This patch adds a new driver for the hardware monitoring features of the third revision of the Abit uGuru chip, found on recent Abit motherboards. This is an entirely different beast then the first and second revision (its again a winbond microcontroller, but the "protocol" to talk to it and the bank addresses are very different. Signed-off-by: NHans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: NMark M. Hoffman <mhoffman@lightlink.com>
-
由 Phil Endecott 提交于
Add support for the "temperature mode" fan speed control. In this mode, the user can define 3 temperature/speed trip points, and the chip will set the speed automatically according to the temperature changes. Signed-off-by: NPhil Endecott <kernel@chezphil.org> Signed-off-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NMark M. Hoffman <mhoffman@lightlink.com>
-
由 Jean Delvare 提交于
The w83627ehf driver changes the fan clock divider automatically when a new min fan speed is set. It is supposed to preserve the fan speed reading while doing so, bug doesn't really. Fix it. Signed-off-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NMark M. Hoffman <mhoffman@lightlink.com>
-
由 Hans de Goede 提交于
This patch fixes the detection of volt inputs with a reading of more then 240 units. Signed-off-by: NHans de Goede <j.w.r.degoede@hhs.nl> Signed-off-by: NMark M. Hoffman <mhoffman@lightlink.com>
-
由 Juerg Haefliger 提交于
This patch adds the SMSC SCH5317 chip (device ID 0x85) as a supported device to the smsc47b397 driver. Signed-off-by: Juerg Haefliger <juergh at gmail.com> Signed-off-by: NMark M. Hoffman <mhoffman@lightlink.com>
-
由 corentin.labbe 提交于
This is the patch for converting it87 to a platform driver (and remove i2c-isa). Signed-off-by: NCorentin LABBE <corentin.labbe@geomatys.fr> Acked-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NMark M. Hoffman <mhoffman@lightlink.com>
-
由 Jean Delvare 提交于
Fix a potential race condition when some hardware monitoring platform drivers are being unloaded. I believe that the driver data pointer shouldn't be cleared before all the sysfs files are removed, otherwise a sysfs callback might attempt to dereference a NULL pointer. I'm not sure exactly what the driver core protects drivers against, so let's play it safe. While we're here, clear the driver data pointer when probe fails, so as to not leave an invalid pointer behind us. Signed-off-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NMark M. Hoffman <mhoffman@lightlink.com>
-
由 Roger Lucas 提交于
Convert the vt8231 driver from the nonsensical i2c-isa hack to a regular platform driver. Signed-off-by: NRoger Lucas <roger@planbit.co.uk> Signed-off-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NMark M. Hoffman <mhoffman@lightlink.com>
-
由 Jean Delvare 提交于
Use PCI_REVISION_ID instead of our own define. Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Jean Delvare 提交于
This lets us get rid of macro-generated functions and shrinks the driver size by about 7%. Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Jean Delvare 提交于
Convert the sis5595 driver from the nonsensical i2c-isa hack to a regular platform driver. Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Jean Delvare 提交于
This lets us get rid of macro-generated functions and shrinks the driver size by about 9%. Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Jean Delvare 提交于
Convert the via686a driver from the nonsensical i2c-isa hack to a regular platform driver. Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Jean Delvare 提交于
Fix the writing of the temperature interrupt configuration. The old code was working only by accident. Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Carlos Olalla Martinez 提交于
Signed-off-by: NCarlos Olalla <com.ea@tinet.org> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Rudolf Marek 提交于
Add support for IT8726F chip driver, which is just same as IT8716F with additional glue logic for AMD power sequencing. Signed-off-by: NRudolf Marek <r.marek@assembler.cz> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Jean Delvare 提交于
We have the following naming convention documented in Documentation/hwmon/sysfs-interface for fault files: in[0-*]_input_fault fan[1-*]_input_fault temp[1-*]_input_fault Some drivers follow this convention (lm63, lm83, lm90, smsc47m192). However some drivers omit the "input" part and create files named fan1_fault (pc87427) or temp1_fault (dme1737). And the new "generic" libsensors follows this second (non-standard) convention, so it fails to report fault conditions for drivers which follow the standard. We want a single naming scheme, and everyone seems to prefer the shorter variant, so let's go for it. Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Rainer Birkenmaier 提交于
Signed-off-by: NRainer Birkenmaier <rainer.birkenmaier@siemens.com> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Jean Delvare 提交于
Use platform_device_add_data() in hardware monitoring drivers. This makes the code nicer and smaller too. Reported by David Hubbard. Signed-off-by: NJean Delvare <khali@linux-fr.org> Cc: David Hubbard <david.c.hubbard@gmail.com>
-
由 Jean Delvare 提交于
Convert the pc87360 driver from the nonsensical i2c-isa hack to a regular platform driver. This is a direct conversion, other cleanups could happen on top of that. Signed-off-by: NJean Delvare <khali@linux-fr.org> Acked-by: NJim Cromie <jim.cromie@gmail.com>
-
由 Juerg Haefliger 提交于
Add documentation for the new SMSC DME1737 driver. Signed-off-by: Juerg Haefliger <juergh at gmail.com> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Juerg Haefliger 提交于
Add support for the hardware monitoring and fan control capabilities of the SMSC DME1737 and Asus A8000 Super-I/O chips. The hardware monitoring logic of this chip is similar to the LM85 but has some additional features that this driver supports. Even though it's a Super-I/O chip, the hardware monitoring logic can only be accessed via SMBus. Signed-off-by: Juerg Haefliger <juergh at gmail.com> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Jean Delvare 提交于
Future versions of libsensors will need this. Signed-off-by: NJean Delvare <khali@linux-fr.org> Cc: Aurelien Jarno <aurelien@aurel32.net>
-
由 Jean Delvare 提交于
This lets us get rid of macro-generated functions and shrinks the driver size by about 8%. Signed-off-by: NJean Delvare <khali@linux-fr.org> Cc: Aurelien Jarno <aurelien@aurel32.net>
-
由 Jean Delvare 提交于
* Discard comments which do not apply or are redundant. * Remove a few useless instructions. * Rename new_client to just client. Signed-off-by: NJean Delvare <khali@linux-fr.org> Cc: Aurelien Jarno <aurelien@aurel32.net>
-
由 Jean Delvare 提交于
Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Jean Delvare 提交于
Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Mark M. Hoffman 提交于
Mark M. Hoffman is taking over for Jean Delvare as maintainer of the hwmon subsystem. He is also the author/maintainer for several existing drivers. Signed-off-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NMark M. Hoffman <mhoffman@lightlink.com>
-
- 09 7月, 2007 4 次提交
-
-
由 Linus Torvalds 提交于
Woo-hoo. I'm sure somebody will report a "this doesn't compile, and I have a new root exploit" five minutes after release, but it still feels good ;) Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
* master.kernel.org:/pub/scm/linux/kernel/git/bart/ide-2.6: qd65xx: fix PIO mode selection sis5513: adding PCI-ID
-
由 Linus Torvalds 提交于
Commit 1c710c89 added the utimensat() system call, but didn't handle the case of checking for the writability of the target right, when the target was a file descriptor, not a filename. We cannot use vfs_permission(MAY_WRITE) for that case, and need to simply check whether the file descriptor is writable. The oops from using the wrong function was noticed and narrowed down by Markus Trippelsdorf. Cc: Ulrich Drepper <drepper@redhat.com> Cc: Markus Trippelsdorf <markus@trippelsdorf.de> Cc: Andrew Morton <akpm@linux-foundation.org> Acked-by: NAl Viro <viro@ftp.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Peter Zijlstra 提交于
Fix a post-2.6.21 regression. read_cache_page_async() has two invocations of mark_page_accessed() which will launch pages right onto the active list. Remove the first one, keeping the latter one. This avoids marking unwanted pages active (in the retry loop). Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: NNick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 08 7月, 2007 3 次提交
-
-
PIO4 is a maximum PIO mode supported by a driver. Using "255" as a max_mode argument to ide_get_best_pio_mode() could result in wrong timings being used by a driver (for "pio" equal to 5) or OOPS (for "pio" values > 5 && < 255). Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com> Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Reviewed-by: NAlan Cox <alan@lxorguk.ukuu.org.uk>
-
由 Uwe Koziolek 提交于
The SiS966 has one additional PCI-ID 1180. If the chipset is using this PCI-ID, the primary channel is connected to the first PATA-port. The secondary channel is connected to SATA-ports in IDE emulation mode. The legacy IO-ports are used. The including of the PCI-ID into pata_sis is not sufficient, because the legacy driver in drivers/ide is initialized before pata_sis. Signed-off-by: NUwe Koziolek <uwe.koziolek@gmx.net> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
由 Adrian Bunk 提交于
The dependency of DLM on SYSFS got lost in commit 6ed7257b resulting in the following compile error with CONFIG_DLM=y, CONFIG_SYSFS=n: <-- snip --> ... LD .tmp_vmlinux1 fs/built-in.o: In function `dlm_lockspace_init': /home/bunk/linux/kernel-2.6/linux-2.6.22-rc6-mm1/fs/dlm/lockspace.c:231: undefined reference to `kernel_subsys' fs/built-in.o: In function `configfs_init': /home/bunk/linux/kernel-2.6/linux-2.6.22-rc6-mm1/fs/configfs/mount.c:143: undefined reference to `kernel_subsys' make[1]: *** [.tmp_vmlinux1] Error 1 <-- snip --> Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-