- 23 6月, 2015 14 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 warning fixlet from Ingo Molnar: "A build fix for certain (rare) variants of binutils that did not make it into v4.1" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/boot: Fix overflow warning with 32-bit binutils
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pul x86 microcode updates from Ingo Molnar: "x86 microcode loader updates from Borislav Petkov: - early parsing of the built-in microcode - cleanups - misc smaller fixes" * 'x86-microcode-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/microcode: Correct CPU family related variable types x86/microcode: Disable builtin microcode loading on 32-bit for now x86/microcode/intel: Rename get_matching_sig() x86/microcode/intel: Simplify get_matching_sig() x86/microcode/intel: Simplify update_match_cpu() x86/microcode/intel: Rename get_matching_microcode x86/cpu/microcode: Zap changelog x86/microcode: Parse built-in microcode early x86/microcode/intel: Remove unused @rev arg of get_matching_sig() x86/microcode/intel: Get rid of revision_is_newer()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 kdump updates from Ingo Molnar: "Three kdump robustness related improvements (Joerg Roedel)" * 'x86-kdump-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/crash: Allocate enough low memory when crashkernel=high x86/swiotlb: Try coherent allocations with __GFP_NOWARN swiotlb: Warn on allocation failure in swiotlb_alloc_coherent()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 FPU updates from Ingo Molnar: "This tree contains two main changes: - The big FPU code rewrite: wide reaching cleanups and reorganization that pulls all the FPU code together into a clean base in arch/x86/fpu/. The resulting code is leaner and faster, and much easier to understand. This enables future work to further simplify the FPU code (such as removing lazy FPU restores). By its nature these changes have a substantial regression risk: FPU code related bugs are long lived, because races are often subtle and bugs mask as user-space failures that are difficult to track back to kernel side backs. I'm aware of no unfixed (or even suspected) FPU related regression so far. - MPX support rework/fixes. As this is still not a released CPU feature, there were some buglets in the code - should be much more robust now (Dave Hansen)" * 'x86-fpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (250 commits) x86/fpu: Fix double-increment in setup_xstate_features() x86/mpx: Allow 32-bit binaries on 64-bit kernels again x86/mpx: Do not count MPX VMAs as neighbors when unmapping x86/mpx: Rewrite the unmap code x86/mpx: Support 32-bit binaries on 64-bit kernels x86/mpx: Use 32-bit-only cmpxchg() for 32-bit apps x86/mpx: Introduce new 'directory entry' to 'addr' helper function x86/mpx: Add temporary variable to reduce masking x86: Make is_64bit_mm() widely available x86/mpx: Trace allocation of new bounds tables x86/mpx: Trace the attempts to find bounds tables x86/mpx: Trace entry to bounds exception paths x86/mpx: Trace #BR exceptions x86/mpx: Introduce a boot-time disable flag x86/mpx: Restrict the mmap() size check to bounds tables x86/mpx: Remove redundant MPX_BNDCFG_ADDR_MASK x86/mpx: Clean up the code by not passing a task pointer around when unnecessary x86/mpx: Use the new get_xsave_field_ptr()API x86/fpu/xstate: Wrap get_xsave_addr() to make it safer x86/fpu/xstate: Fix up bad get_xsave_addr() assumptions ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 EFI updates from Ingo Molnar: "EFI changes: - Use idiomatic negative error values in efivar_create_sysfs_entry() instead of returning '1' to indicate error (Dan Carpenter) - Implement new support to expose the EFI System Resource Tables in sysfs, which provides information for performing firmware updates (Peter Jones) - Documentation cleanup in the EFI handover protocol section which falsely claimed that 'cmdline_size' needed to be filled out by the boot loader (Alex Smith) - Align the order of SMBIOS tables in /sys/firmware/efi/systab to match the way that we do things for ACPI and add documentation to Documentation/ABI (Jean Delvare)" * 'x86-efi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: efi: Work around ia64 build problem with ESRT driver efi: Add 'systab' information to Documentation/ABI efi: dmi: List SMBIOS3 table before SMBIOS table efi/esrt: Fix some compiler warnings x86, doc: Remove cmdline_size from list of fields to be filled in for EFI handover efi: Add esrt support efi: efivar_create_sysfs_entry() should return negative error codes
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 debugging documentation updates from Ingo Molnar: "Documentation updates about x86 kernel stacks" * 'x86-debug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/Documentation: Adapt Ingo's explanation on printing backtraces x86/Documentation: Remove STACKFAULT_STACK bulletpoint x86/Documentation: Move kernel-stacks doc one level up
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 CPU features from Ingo Molnar: "Various CPU feature support related changes: in particular the /proc/cpuinfo model name sanitization change should be monitored, it has a chance to break stuff. (but really shouldn't and there are no regression reports)" * 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/cpu/amd: Give access to the number of nodes in a physical package x86/cpu: Trim model ID whitespace x86/cpu: Strip any /proc/cpuinfo model name field whitespace x86/cpu/amd: Set X86_FEATURE_EXTD_APICID for future processors x86/gart: Check for GART support before accessing GART registers
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 cleanups from Ingo Molnar: "Misc cleanups" * 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mm: Clean up types in xlate_dev_mem_ptr() some more x86: Deinline dma_free_attrs() x86: Deinline dma_alloc_attrs() x86: Remove unused TI_cpu x86: Merge common 32-bit values in asm-offsets.c
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull scheduler updates from Ingo Molnar: "The main changes are: - lockless wakeup support for futexes and IPC message queues (Davidlohr Bueso, Peter Zijlstra) - Replace spinlocks with atomics in thread_group_cputimer(), to improve scalability (Jason Low) - NUMA balancing improvements (Rik van Riel) - SCHED_DEADLINE improvements (Wanpeng Li) - clean up and reorganize preemption helpers (Frederic Weisbecker) - decouple page fault disabling machinery from the preemption counter, to improve debuggability and robustness (David Hildenbrand) - SCHED_DEADLINE documentation updates (Luca Abeni) - topology CPU masks cleanups (Bartosz Golaszewski) - /proc/sched_debug improvements (Srikar Dronamraju)" * 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (79 commits) sched/deadline: Remove needless parameter in dl_runtime_exceeded() sched: Remove superfluous resetting of the p->dl_throttled flag sched/deadline: Drop duplicate init_sched_dl_class() declaration sched/deadline: Reduce rq lock contention by eliminating locking of non-feasible target sched/deadline: Make init_sched_dl_class() __init sched/deadline: Optimize pull_dl_task() sched/preempt: Add static_key() to preempt_notifiers sched/preempt: Fix preempt notifiers documentation about hlist_del() within unsafe iteration sched/stop_machine: Fix deadlock between multiple stop_two_cpus() sched/debug: Add sum_sleep_runtime to /proc/<pid>/sched sched/debug: Replace vruntime with wait_sum in /proc/sched_debug sched/debug: Properly format runnable tasks in /proc/sched_debug sched/numa: Only consider less busy nodes as numa balancing destinations Revert 095bebf6 ("sched/numa: Do not move past the balance point if unbalanced") sched/fair: Prevent throttling in early pick_next_task_fair() preempt: Reorganize the notrace definitions a bit preempt: Use preempt_schedule_context() as the official tracing preemption point sched: Make preempt_schedule_context() function-tracing safe x86: Remove cpu_sibling_mask() and cpu_core_mask() x86: Replace cpu_**_mask() with topology_**_cpumask() ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull perf fixes from Ingo Molnar: "These are the left over fixes from the v4.1 cycle" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf tools: Fix build breakage if prefix= is specified perf/x86: Honor the architectural performance monitoring version perf/x86/intel: Fix PMI handling for Intel PT perf/x86/intel/bts: Fix DS area sharing with x86_pmu events perf/x86: Add more Broadwell model numbers perf: Fix ring_buffer_attach() RCU sync, again
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull perf updates from Ingo Molnar: "Kernel side changes mostly consist of work on x86 PMU drivers: - x86 Intel PT (hardware CPU tracer) improvements (Alexander Shishkin) - x86 Intel CQM (cache quality monitoring) improvements (Thomas Gleixner) - x86 Intel PEBSv3 support (Peter Zijlstra) - x86 Intel PEBS interrupt batching support for lower overhead sampling (Zheng Yan, Kan Liang) - x86 PMU scheduler fixes and improvements (Peter Zijlstra) There's too many tooling improvements to list them all - here are a few select highlights: 'perf bench': - Introduce new 'perf bench futex' benchmark: 'wake-parallel', to measure parallel waker threads generating contention for kernel locks (hb->lock). (Davidlohr Bueso) 'perf top', 'perf report': - Allow disabling/enabling events dynamicaly in 'perf top': a 'perf top' session can instantly become a 'perf report' one, i.e. going from dynamic analysis to a static one, returning to a dynamic one is possible, to toogle the modes, just press 'f' to 'freeze/unfreeze' the sampling. (Arnaldo Carvalho de Melo) - Make Ctrl-C stop processing on TUI, allowing interrupting the load of big perf.data files (Namhyung Kim) 'perf probe': (Masami Hiramatsu) - Support glob wildcards for function name - Support $params special probe argument: Collect all function arguments - Make --line checks validate C-style function name. - Add --no-inlines option to avoid searching inline functions - Greatly speed up 'perf probe --list' by caching debuginfo. - Improve --filter support for 'perf probe', allowing using its arguments on other commands, as --add, --del, etc. 'perf sched': - Add option in 'perf sched' to merge like comms to lat output (Josef Bacik) Plus tons of infrastructure work - in particular preparation for upcoming threaded perf report support, but also lots of other work - and fixes and other improvements. See (much) more details in the shortlog and in the git log" * 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (305 commits) perf tools: Configurable per thread proc map processing time out perf tools: Add time out to force stop proc map processing perf report: Fix sort__sym_cmp to also compare end of symbol perf hists browser: React to unassigned hotkey pressing perf top: Tell the user how to unfreeze events after pressing 'f' perf hists browser: Honour the help line provided by builtin-{top,report}.c perf hists browser: Do not exit when 'f' is pressed in 'report' mode perf top: Replace CTRL+z with 'f' as hotkey for enable/disable events perf annotate: Rename source_line_percent to source_line_samples perf annotate: Display total number of samples with --show-total-period perf tools: Ensure thread-stack is flushed perf top: Allow disabling/enabling events dynamicly perf evlist: Add toggle_enable() method perf trace: Fix race condition at the end of started workloads perf probe: Speed up perf probe --list by caching debuginfo perf probe: Show usage even if the last event is skipped perf tools: Move libtraceevent dynamic list to separated LDFLAGS variable perf tools: Fix a problem when opening old perf.data with different byte order perf tools: Ignore .config-detected in .gitignore perf probe: Fix to return error if no probe is added ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull locking updates from Ingo Molnar: "The main changes are: - 'qspinlock' support, enabled on x86: queued spinlocks - these are now the spinlock variant used by x86 as they outperform ticket spinlocks in every category. (Waiman Long) - 'pvqspinlock' support on x86: paravirtualized variant of queued spinlocks. (Waiman Long, Peter Zijlstra) - 'qrwlock' support, enabled on x86: queued rwlocks. Similar to queued spinlocks, they are now the variant used by x86: CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y CONFIG_QUEUED_SPINLOCKS=y CONFIG_ARCH_USE_QUEUED_RWLOCKS=y CONFIG_QUEUED_RWLOCKS=y - various lockdep fixlets - various locking primitives cleanups, further WRITE_ONCE() propagation" * 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits) locking/lockdep: Remove hard coded array size dependency locking/qrwlock: Don't contend with readers when setting _QW_WAITING lockdep: Do not break user-visible string locking/arch: Rename set_mb() to smp_store_mb() locking/arch: Add WRITE_ONCE() to set_mb() rtmutex: Warn if trylock is called from hard/softirq context arch: Remove __ARCH_HAVE_CMPXCHG locking/rtmutex: Drop usage of __HAVE_ARCH_CMPXCHG locking/qrwlock: Rename QUEUE_RWLOCK to QUEUED_RWLOCKS locking/pvqspinlock: Rename QUEUED_SPINLOCK to QUEUED_SPINLOCKS locking/pvqspinlock: Replace xchg() by the more descriptive set_mb() locking/pvqspinlock, x86: Enable PV qspinlock for Xen locking/pvqspinlock, x86: Enable PV qspinlock for KVM locking/pvqspinlock, x86: Implement the paravirt qspinlock call patching locking/pvqspinlock: Implement simple paravirt support for the qspinlock locking/qspinlock: Revert to test-and-set on hypervisors locking/qspinlock: Use a simple write to grab the lock locking/qspinlock: Optimize for smaller NR_CPUS locking/qspinlock: Extract out code snippets for the next patch locking/qspinlock: Add pending bit ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull RCU updates from Ingo Molnar: - Continued initialization/Kconfig updates: hide most Kconfig options from unsuspecting users. There's now a single high level configuration option: * * RCU Subsystem * Make expert-level adjustments to RCU configuration (RCU_EXPERT) [N/y/?] (NEW) Which if answered in the negative, leaves us with a single interactive configuration option: Offload RCU callback processing from boot-selected CPUs (RCU_NOCB_CPU) [N/y/?] (NEW) All the rest of the RCU options are configured automatically. Later on we'll remove this single leftover configuration option as well. - Remove all uses of RCU-protected array indexes: replace the rcu_[access|dereference]_index_check() APIs with READ_ONCE() and rcu_lockdep_assert() - RCU CPU-hotplug cleanups - Updates to Tiny RCU: a race fix and further code shrinkage. - RCU torture-testing updates: fixes, speedups, cleanups and documentation updates. - Miscellaneous fixes - Documentation updates * 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (60 commits) rcutorture: Allow repetition factors in Kconfig-fragment lists rcutorture: Display "make oldconfig" errors rcutorture: Update TREE_RCU-kconfig.txt rcutorture: Make rcutorture scripts force RCU_EXPERT rcutorture: Update configuration fragments for rcutree.rcu_fanout_exact rcutorture: TASKS_RCU set directly, so don't explicitly set it rcutorture: Test SRCU cleanup code path rcutorture: Replace barriers with smp_store_release() and smp_load_acquire() locktorture: Change longdelay_us to longdelay_ms rcutorture: Allow negative values of nreaders to oversubscribe rcutorture: Exchange TREE03 and TREE08 NR_CPUS, speed up CPU hotplug rcutorture: Exchange TREE03 and TREE04 geometries locktorture: fix deadlock in 'rw_lock_irq' type rcu: Correctly handle non-empty Tiny RCU callback list with none ready rcutorture: Test both RCU-sched and RCU-bh for Tiny RCU rcu: Further shrink Tiny RCU by making empty functions static inlines rcu: Conditionally compile RCU's eqs warnings rcu: Remove prompt for RCU implementation rcu: Make RCU able to tolerate undefined CONFIG_RCU_KTHREAD_PRIO rcu: Make RCU able to tolerate undefined CONFIG_RCU_FANOUT_LEAF ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs由 Linus Torvalds 提交于
Pull vfs updates from Al Viro: "In this pile: pathname resolution rewrite. - recursion in link_path_walk() is gone. - nesting limits on symlinks are gone (the only limit remaining is that the total amount of symlinks is no more than 40, no matter how nested). - "fast" (inline) symlinks are handled without leaving rcuwalk mode. - stack footprint (independent of the nesting) is below kilobyte now, about on par with what it used to be with one level of nested symlinks and ~2.8 times lower than it used to be in the worst case. - struct nameidata is entirely private to fs/namei.c now (not even opaque pointers are being passed around). - ->follow_link() and ->put_link() calling conventions had been changed; all in-tree filesystems converted, out-of-tree should be able to follow reasonably easily. For out-of-tree conversions, see Documentation/filesystems/porting for details (and in-tree filesystems for examples of conversion). That has sat in -next since mid-May, seems to survive all testing without regressions and merges clean with v4.1" * 'for-linus-1' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (131 commits) turn user_{path_at,path,lpath,path_dir}() into static inlines namei: move saved_nd pointer into struct nameidata inline user_path_create() inline user_path_parent() namei: trim do_last() arguments namei: stash dfd and name into nameidata namei: fold path_cleanup() into terminate_walk() namei: saner calling conventions for filename_parentat() namei: saner calling conventions for filename_create() namei: shift nameidata down into filename_parentat() namei: make filename_lookup() reject ERR_PTR() passed as name namei: shift nameidata inside filename_lookup() namei: move putname() call into filename_lookup() namei: pass the struct path to store the result down into path_lookupat() namei: uninline set_root{,_rcu}() namei: be careful with mountpoint crossings in follow_dotdot_rcu() Documentation: remove outdated information from automount-support.txt get rid of assorted nameidata-related debris lustre: kill unused helper lustre: kill unused macro (LOOKUP_CONTINUE) ...
-
- 22 6月, 2015 1 次提交
-
-
由 Linus Torvalds 提交于
-
- 21 6月, 2015 2 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending由 Linus Torvalds 提交于
Pull scsi target fixes from Nicholas Bellinger: "Apologies for the late pull request. Here are the outstanding target-pending fixes for v4.1 code. The series contains three patches from Sagi + Co that address a few iser-target issues that have been uncovered during recent testing at Mellanox. Patch #1 has a v3.16+ stable tag, and #2-3 have v3.10+ stable tags" * git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: iser-target: Fix possible use-after-free iser-target: release stale iser connections iser-target: Fix variable-length response error completion
-
git://people.freedesktop.org/~airlied/linux由 Linus Torvalds 提交于
Pull drm fixes from Dave Airlie: "A smattering of fixes, mgag200: don't accept modes that aren't aligned properly as hw can't do it i915: two regression fixes radeon: one query to allow userspace fixes one oops fixer for older hw with new options enabled" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/radeon: don't probe MST on hw we don't support it on drm/radeon: Add RADEON_INFO_VA_UNMAP_WORKING query drm/mgag200: Reject non-character-cell-aligned mode widths Revert "drm/i915: Don't skip request retirement if the active list is empty" drm/i915: Always reset vma->ggtt_view.pages cache on unbinding
-
- 20 6月, 2015 16 次提交
-
-
由 Ingo Molnar 提交于
Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo: User visible changes: - Replace CTRL+z with 'f' as hotkey for enable/disable events (Arnaldo Carvalho de Melo) - Do not exit when 'f' is pressed in 'report' mode (Arnaldo Carvalho de Melo) - Tell the user how to unfreeze events after pressing 'f' in 'perf top' (Arnaldo Carvalho de Melo) - React to unassigned hotkey pressing in 'top/report' (Arnaldo Carvalho de Melo) - Display total number of samples with --show-total-period in 'annotate' (Martin Liška) - Add timeout to make procfs mmap processing more robust (Kan Liang) - Fix sort__sym_cmp to also compare end of symbol (Yannick Brosseau) Infrastructure changes: - Ensure thread-stack is flushed (Adrian Hunter) Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Ingo Molnar 提交于
Merge tag 'perf-urgent-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent Pull perf/urgent fix from Arnaldo Carvalho de Melo: - Fix build breakage if prefix= is specified, this introduced a regression for a build idiom used by the Debian "linux-tools" package, that does: MAKE_PERF := $(MAKE) prefix=/usr V=1 ARCH=$(KERNEL_ARCH_PERF) ... Fix it. (Lukas Wunner) Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Kan Liang 提交于
The time out to limit the individual proc map processing was hard code to 500ms. This patch introduce a new option --proc-map-timeout to make the time limit configurable. Signed-off-by: NKan Liang <kan.liang@intel.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Ying Huang <ying.huang@intel.com> Link: http://lkml.kernel.org/r/1434549071-25611-2-git-send-email-kan.liang@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Kan Liang 提交于
System wide sampling like 'perf top' or 'perf record -a' read all threads /proc/xxx/maps before sampling. If there are any threads which generating a keeping growing huge maps, perf will do infinite loop during synthesizing. Nothing will be sampled. This patch fixes this issue by adding per-thread timeout to force stop this kind of endless proc map processing. PERF_RECORD_MISC_PROC_MAP_PARSE_TIME_OUT is introduced to indicate that the mmap record are truncated by time out. User will get warning notification when truncated mmap records are detected. Reported-by: NYing Huang <ying.huang@intel.com> Signed-off-by: NKan Liang <kan.liang@intel.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Ying Huang <ying.huang@intel.com> Link: http://lkml.kernel.org/r/1434549071-25611-1-git-send-email-kan.liang@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Yannick Brosseau 提交于
When using a map file from a JIT, due to memory reuse, we can obtain multiple symbols with the same start address but a different length. The symbols__find does check for the end so not doing it in sort__sym_cmp was causing the hist_entry in the annotate part of a report to match to the wrong entry, causing a fatal error. Signed-off-by: NYannick Brosseau <scientist@fb.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: kernel-team@fb.com Link: http://lkml.kernel.org/r/1434584470-17771-1-git-send-email-scientist@fb.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Arnaldo Carvalho de Melo 提交于
When that happens we were just ignoring the key press, now this message is presented in the bottom line (the help line): "Press '?' for help on key bindings" Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-iyma2j5kj3q9i1stl4mfh90n@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Arnaldo Carvalho de Melo 提交于
When the user presses 'f' to disable events the visual cues are, well, the percentages not changing and the number of events freezing. Be more explicit by changing the help line at the bottom of the screen to show the following messages when 'f' is pressed: "Press 'f' again to re-enable the events" And then, when 'f' is pressed again: "Press 'f' to disable the events or 'h' Suggested-by: NIngo Molnar <mingo@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-uhiswg9a9rxm5gxg7ptjskjn@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Arnaldo Carvalho de Melo 提交于
The hists_browser was replacing whatever helpline provided by 'top' or 'report' with a static "Press '?' for help on key bindings", fix it. Now the message passed by top appears at the bottom of the screen: "For a higher level overview, try: perf top --sort comm,dso" As well the message that will be added when the user presses 'f' to disable the events, something along the lines of "press f again to re-enable...". Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-dacaja70mbfz3a0yj1n180gx@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Arnaldo Carvalho de Melo 提交于
The 'f' hotkey is only used when in 'top', dynamic mode, to enable/disable events, currently not making sense in the 'report', static mode, where we can't go from showing the histogram entries created from a perf.data file to adding more events after recreating the evlist created from the perf.data file, albeit possible, this is not implemented right now. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-lholzf472pu98dkkijggwx2m@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Arnaldo Carvalho de Melo 提交于
I.e. 'freeze'/'unfreeze', this is because CTRL+z has a well known action, i.e. suspend the app, perf needs to follow that convention, that will be done on a separate patch, tho. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-oedcl6ovohara4koig14ayip@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Lukas Wunner 提交于
Invoking Makefile.perf with prefix= breaks the build since Makefile.perf hands that variable down to Makefile.build where it overrides prefix := $(subst ./,,$(OUTPUT)$(dir)/) leading to errors like this: No rule to make target '/usrabspath.o', needed by '/usrlibperf-in.o' Signed-off-by: NLukas Wunner <lukas@wunner.de> Acked-by: NJiri Olsa <jolsa@kernel.org> Cc: David Ahern <dsahern@gmail.com> Fixes: c819e2cf Link: http://lkml.kernel.org/r/5582c48a.84a22b0a.a918.5285SMTPIN_ADDED_MISSING@mx.google.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Arnaldo Carvalho de Melo 提交于
To better reflect the purpose of this struct, that is to hold info about samples, its total number and is percentage. Cc: Martin Liska <mliska@suse.cz> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/n/tip-6bf8gwcl975uurl0ttpvtk69@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Martin Liška 提交于
To compare two records on an instruction base, with --show-total-period option provided, display total number of samples that belong to a line in assembly language. New hot key 't' is introduced for 'perf annotate' TUI. Signed-off-by: NMartin Liska <mliska@suse.cz> Cc: Andi Kleen <andi@firstfloor.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/5583E26D.1040407@suse.czSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Adrian Hunter 提交于
The thread-stack represents a thread's current stack. When a thread exits there can still be many functions on the stack e.g. exit() can be called many levels deep, so all the callers will never return. To get that information output, the thread-stack must be flushed. Previously it was assumed the thread-stack would be flushed when the struct thread was deleted. With thread ref-counting it is no longer clear when that will be, if ever. So instead explicitly flush all the thread-stacks at the end of a session. Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/r/1432906425-9911-3-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux由 Linus Torvalds 提交于
Pull clk fixes from Michael Turquette: "Very late clk regression fixes for the ARM-based AT91 platform. These went unnoticed by me until recently, hence the late pull request" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: at91: fix h32mx prototype inclusion in pmc header clk: at91: trivial: typo in peripheral clock description clk: at91: fix PERIPHERAL_MAX_SHIFT definition clk: at91: pll: fix input range validity check
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound由 Linus Torvalds 提交于
Pull sound fixes from Takashi Iwai: "Nothing looks scary, just a few usual HD-audio regression fixes and fixup, in addition to a minor Kconfig dependency fix for the old MIPS drivers" * tag 'sound-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda - Fix unused label skip_i915 ALSA: hda - Fix noisy outputs on Dell XPS13 (2015 model) ALSA: mips: let SND_SGI_O2 select SND_PCM ALSA: hda - Fix audio crackles on Dell Latitude E7x40 ALSA: hda - adding a DAC/pin preference map for a HP Envy TS machine
-
- 19 6月, 2015 7 次提交
-
-
-
由 Borislav Petkov 提交于
When building the kernel with 32-bit binutils built with support only for the i386 target, we get the following warning: arch/x86/kernel/head_32.S:66: Warning: shift count out of range (32 is not between 0 and 31) The problem is that in that case, binutils' internal type representation is 32-bit wide and the shift range overflows. In order to fix this, manipulate the shift expression which creates the 4GiB constant to not overflow the shift count. Suggested-by: NMichael Matz <matz@suse.de> Reported-and-tested-by: NEnrico Mioso <mrkiko.rs@gmail.com> Signed-off-by: NBorislav Petkov <bp@suse.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Borislav Petkov <bp@alien8.de> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Nicolas Ferre 提交于
Trivial fix that prevents to compile this pmc clock driver if h32mx clock is present but smd clock isn't. Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: NBoris Brezillon <boris.brezillon@free-electrons.com> Acked-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com> Fixes: bcc5fd49 ("clk: at91: add a driver for the h32mx clock") Cc: <stable@vger.kernel.org> # 3.18+
-
由 Nicolas Ferre 提交于
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: NBoris Brezillon <boris.brezillon@free-electrons.com>
-
由 Boris Brezillon 提交于
Fix the PERIPHERAL_MAX_SHIFT definition (3 instead of 4) and adapt the round_rate and set_rate logic accordingly. Signed-off-by: NBoris Brezillon <boris.brezillon@free-electrons.com> Reported-by: N"Wu, Songjun" <Songjun.Wu@atmel.com>
-
由 Boris Brezillon 提交于
The PLL impose a certain input range to work correctly, but it appears that this input range does not apply on the input clock (or parent clock) but on the input clock after it has passed the PLL divisor. Fix the implementation accordingly. Cc: <stable@vger.kernel.org> # v3.14+ Signed-off-by: NBoris Brezillon <boris.brezillon@free-electrons.com> Reported-by: NJonas Andersson <jonas@microbit.se>
-
由 Zhiqiang Zhang 提交于
Sine commit 269ad801 ("sched/deadline: Avoid double-accounting in case of missed deadlines), parameter 'rq' is no longer used, so remove it. Signed-off-by: NZhiqiang Zhang <zhangzhiqiang.zhang@huawei.com> Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org> Cc: <juri.lelli@gmail.com> Cc: <luca.abeni@unitn.it> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Borislav Petkov <bp@alien8.de> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1434338120-43773-1-git-send-email-zhangzhiqiang.zhang@huawei.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-