- 08 6月, 2009 1 次提交
-
-
由 David Heidelberger 提交于
Added 7.1 support for MSI GX620 and jack quirk. Reference: kernel bug#13430 http://bugzilla.kernel.org/show_bug.cgi?id=13430Signed-off-by: NDavid Heidelberger <d.okias@gmail.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 05 6月, 2009 1 次提交
-
-
由 Guido Günther 提交于
with BIOS probing only we offer a non functional headphone swith and volume slider. Signed-off-by: NGuido Günther <agx@sigxcpu.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 02 6月, 2009 1 次提交
-
-
由 Hector Martin 提交于
Short story: this laptop has 5.1 built-in speakers which you *really* want to use (the not-so-"sub" woofer is what makes the audio above average for a laptop), so 6-channel support is important (plus a decent asound.conf to upmix stereo). It also has the 3 typical jacks that ought to have a selectable mode. And it's based on ALC889, which sucks. Rationale/explanations: The const_channel_count stuff was added because, for a laptop like this, you always have 6 channels available (internal speakers) but still need to set the mode for the 3 external jacks. Therefore, the device always needs to be in 6-channel mode but there still needs to be a mixer control for the jack mode. You could use line/mic-in at the same time as the 6 internal speakers, for example. You might be tempted to make it even smarter by dynamically switching the max channel count when headphones are plugged in (therefore muting the internal speakers and reducing the physical channel count to the jack channel mode), but as a user I consider this to be harmful because I want the audio to blow up to 6 channels / upmixed as soon as I unplug the headphones, and having opened the device while in 2-channel mode would prevent this from working (and always making 6-channel mode available doesn't do any harm). The hardware needs EAPD turned on and the DACs routed to the internal speaker pins, so the patch adds those verbs. The ALC889 CLFE and subsequent (side/aux, here unused) DACs do NOT work by default, at least here. I wasted much time trying to talk to Realtek/pshou about this, but they just kept sending me useless updates to patch_realtek.c that did nothing relevant. In the end I gave up and brute forced the issue by trying to flip every bit in the proprietary coefficient registers, and eventually found the two magic registers that need to be cleared to enable all DACs. I have only heard Acer users complain, but that might be because ALC889 is pretty new and using 5.1 (and noticing the missing center/lfe channels) might not be that common. If this is a generalized issue with all ALC889 systems then those verbs should probably be moved to a common verb array. The internal mic is untested and probably doesn't work. These settings will probably work for other Acer Gemstone laptops with the same 5.1 speaker config. When identified, those should be added to the PCI subsystem ID list. Signed-off-by: NHector Martin <hector@marcansoft.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 25 5月, 2009 1 次提交
-
-
由 Takashi Iwai 提交于
The recent fix for the headphone volume control on IDT/STAC codecs resulted in the removal of invalid "Side" volume eventually. But, if the front panel doesn't exist, this setup could be regarded as a sort of regression, as reported in kernel bug #13250. Now as a workaround, a new model 5stack-no-fp is added so that the user without the front panel can choose this one explicitly. Reference: bko#13250 http://bugzilla.kernel.org/show_bug.cgi?id=13250Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 18 5月, 2009 1 次提交
-
-
由 Torben Schulz 提交于
This patch adds support for MacBook 3,1 sound by adding a model new "mb31" with the appropriate init verbs, mixers and channel modes to the ALC883 configuration. patch_alc882() and patch_alc883() are modified to handle the MacBook 3,1 sound-chip (Realtek ALC889A) correctly. Signed-off-by: NTorben Schulz <public@letorbi.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 12 5月, 2009 1 次提交
-
-
由 Chris Pockelé 提交于
Add specific configuration for Samsung NC10 mini notebook. Internal mic/speakers will be correctly muted when plugging in external ones. Mixer controls are added for speakers, headphones and PC beep. "Boost" is added for the microphones. Signed-off-by: NChris Pockelé <chris.pockele.f1@gmail.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 11 5月, 2009 1 次提交
-
-
由 Takashi Iwai 提交于
Added the missing descriptions and the model names for Realtek codecs to the documentation and the config table. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 04 5月, 2009 1 次提交
-
-
由 James Gardiner 提交于
Signed-off-by: NJames Gardiner <renidragsemaj@yahoo.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 13 3月, 2009 1 次提交
-
-
由 Takashi Iwai 提交于
Add the default pin config for model=vaio (in case of broken BIOS). Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 10 3月, 2009 1 次提交
-
-
由 Takashi Iwai 提交于
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 04 3月, 2009 1 次提交
-
-
由 Takashi Iwai 提交于
Fix the mic input of HP dv6736 with Conexant 5051 codec chip. This laptop seems have no mic-switching per jack connection. A new model hp-dv6736 is introduced to match with the h/w implementation. Reference: Novell bnc#480753 https://bugzilla.novell.com/show_bug.cgi?id=480753Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 26 2月, 2009 1 次提交
-
-
由 Takashi Iwai 提交于
Added the model=auto to STAC/IDT codecs to use the BIOS default setup explicitly. It can be used to disable the device-specific model quirk in the driver. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 13 2月, 2009 1 次提交
-
-
Currently the HP connector on X200 dock doesn't detect when a HP is connected nor allows sound to be played using it. This patch fixes the problem by adding a quirk for this specific model. It's possible that others have the same NID (0x19) to report when dock HP is connected, but I don't have access to any. Please Cc me in the reply since I'm not subscribed to alsa-devel@. Signed-off-by: NAristeu Rozanski <aris@redhat.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 03 2月, 2009 1 次提交
-
-
由 Tony Vroon 提交于
As just pointed out to me, the new tyan model for ALC262 was implemented but not documented. This adds the board to the list, using both its marketing name (Thunder n6650W) and its model number (S2915-E). Signed-off-by: NTony Vroon <tony@linx.net> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 23 1月, 2009 2 次提交
-
-
由 Matthew Ranostay 提交于
Some revisions of the 92hd8xxx codec's not supporting port power downs in which the using of it causes capture and also randomly playback streams to not function at all. Thus by disabling it by default and adding a option to enable it manually will fix all issue on current and future revisions. Signed-off-by: NMatthew Ranostay <mranostay@embeddedalley.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Gateway T1616 laptop needs EAPD always on while the current STAC9205 code turns off per HP plug. Added a new model "eapd" to keep it on. Reference: Novell bnc#467597 https://bugzilla.novell.com/show_bug.cgi?id=467597Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 21 1月, 2009 1 次提交
-
-
由 Takashi Iwai 提交于
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 14 1月, 2009 1 次提交
-
-
由 Takashi Iwai 提交于
Update models in patch_sigmatel.c, mainly for the last Gateway updates. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 19 12月, 2008 1 次提交
-
-
由 Takashi Iwai 提交于
Split the list of model option values to a separate file, HD-Audio-Models.txt, from ALSA-Configuration.txt. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-