- 11 10月, 2007 40 次提交
-
-
由 Thomas Graf 提交于
Signed-off-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Thomas Graf 提交于
Increases readability a lot. Signed-off-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Thomas Graf 提交于
nlmsg_parse() puts attributes at array[type] so the indexing method can be simpilfied by removing the obscuring "- 1". Signed-off-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Thomas Graf 提交于
Adds a policy defining the minimal payload lengths for all the attributes allowing for most attribute validation checks to be removed from in the middle of the code path. Makes updates more consistent as many format errors are recognised earlier, before any changes have been attempted. Signed-off-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Thomas Graf 提交于
Uses nlmsg_parse() to parse the attributes. This actually changes behaviour as unknown attributes (type > MAXTYPE) no longer cause an error. Instead unknown attributes will be ignored henceforth to keep older kernels compatible with more recent userspace tools. Signed-off-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Thomas Graf 提交于
Moves all complex message size calculation into own inlined helper functions and makes use of the type-safe netlink interface. Using nlmsg_new() simplifies the calculation itself as it takes care of the netlink header length by itself. Signed-off-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Thomas Graf 提交于
Moves all of the SUB_POLICY ifdefs related to the attribute size calculation into a function. Signed-off-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Thomas Graf 提交于
Adds alg_len() to calculate the properly padded length of an algorithm attribute to simplify the code. Signed-off-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Thomas Graf 提交于
Also makes use of copy_sec_ctx() in another place and removes duplicated code. Signed-off-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Thomas Graf 提交于
This simplifies successful return codes from >0 to 0. Signed-off-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Thomas Graf 提交于
Signed-off-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Thomas Graf 提交于
Signed-off-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Thomas Graf 提交于
Signed-off-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnaldo Carvalho de Melo 提交于
Signed-off-by: NArnaldo Carvalho de Melo <acme@ghostprotocols.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnaldo Carvalho de Melo 提交于
Signed-off-by: NArnaldo Carvalho de Melo <acme@ghostprotocols.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnaldo Carvalho de Melo 提交于
Signed-off-by: NArnaldo Carvalho de Melo <acme@ghostprotocols.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnaldo Carvalho de Melo 提交于
Signed-off-by: NArnaldo Carvalho de Melo <acme@ghostprotocols.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnaldo Carvalho de Melo 提交于
Signed-off-by: NArnaldo Carvalho de Melo <acme@ghostprotocols.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnaldo Carvalho de Melo 提交于
Signed-off-by: NArnaldo Carvalho de Melo <acme@ghostprotocols.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnaldo Carvalho de Melo 提交于
Signed-off-by: NArnaldo Carvalho de Melo <acme@ghostprotocols.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnaldo Carvalho de Melo 提交于
Now to convert the ackvec code to ktime_t so that we can get rid of dccp_timestamp and the epoch thing in dccp_sock. Signed-off-by: NArnaldo Carvalho de Melo <acme@ghostprotocols.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnaldo Carvalho de Melo 提交于
Signed-off-by: NArnaldo Carvalho de Melo <acme@ghostprotocols.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnaldo Carvalho de Melo 提交于
First user will be the DCCP transport networking protocol. Signed-off-by: NArnaldo Carvalho de Melo <acme@ghostprotocols.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnaldo Carvalho de Melo 提交于
Signed-off-by: NArnaldo Carvalho de Melo <acme@ghostprotocols.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnaldo Carvalho de Melo 提交于
Signed-off-by: NArnaldo Carvalho de Melo <acme@ghostprotocols.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnaldo Carvalho de Melo 提交于
Signed-off-by: NArnaldo Carvalho de Melo <acme@ghostprotocols.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnaldo Carvalho de Melo 提交于
The code was too complicated, if p > 0 in ccid3_hc_tx_no_feedback_timer the timestamp was being obtained to be passed to ccid3_hc_tx_update_x, where only if p > 0 the timestamp was needed, so just leave it to ccid3_hc_tx_update_x to obtain the timestamp if needed. This will help in the upcoming changesets where we'll convert t_ld to ktime_t. We'll eventually try to reuse ktime_get_real() calls again. Signed-off-by: NArnaldo Carvalho de Melo <acme@ghostprotocols.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Neil Horman 提交于
This patch introduces autotuning to the sctp buffer management code similar to the TCP. The buffer space can be grown if the advertised receive window still has room. This might happen if small message sizes are used, which is common in telecom environmens. New tunables are introduced that provide limits to buffer growth and memory pressure is entered if to much buffer spaces is used. Signed-off-by: NNeil Horman <nhorman@tuxdriver.com> Signed-off-by: NVlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jeff Garzik 提交于
Several get/set functions can be handled by a passing the ethtool_op function pointer directly to a generic function. This permits deletion of a fair bit of redundant code. Signed-off-by: NJeff Garzik <jeff@garzik.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jeff Garzik 提交于
Signed-off-by: NJeff Garzik <jeff@garzik.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jeff Garzik 提交于
Signed-off-by: NJeff Garzik <jeff@garzik.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jeff Garzik 提交于
Signed-off-by: NJeff Garzik <jeff@garzik.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Satyam Sharma 提交于
Based upon initial work by Keiichi Kii <k-keiichi@bx.jp.nec.com>. This patch introduces support for dynamic reconfiguration (adding, removing and/or modifying parameters of netconsole targets at runtime) using a userspace interface exported via configfs. Documentation is also updated accordingly. Issues and brief design overview: (1) Kernel-initiated creation / destruction of kernel objects is not possible with configfs -- the lifetimes of the "config items" is managed exclusively from userspace. But netconsole must support boot/module params too, and these are parsed in kernel and hence netpolls must be setup from the kernel. Joel Becker suggested to separately manage the lifetimes of the two kinds of netconsole_target objects -- those created via configfs mkdir(2) from userspace and those specified from the boot/module option string. This adds complexity and some redundancy here and also means that boot/module param-created targets are not exposed through the configfs namespace (and hence cannot be updated / destroyed dynamically). However, this saves us from locking / refcounting complexities that would need to be introduced in configfs to support kernel-initiated item creation / destroy there. (2) In configfs, item creation takes place in the call chain of the mkdir(2) syscall in the driver subsystem. If we used an ioctl(2) to create / destroy objects from userspace, the special userspace program is able to fill out the structure to be passed into the ioctl and hence specify attributes such as local interface that are required at the time we set up the netpoll. For configfs, this information is not available at the time of mkdir(2). So, we keep all newly-created targets (via configfs) disabled by default. The user is expected to set various attributes appropriately (including the local network interface if required) and then write(2) "1" to the "enabled" attribute. Thus, netpoll_setup() is then called on the set parameters in the context of _this_ write(2) on the "enabled" attribute itself. This design enables the user to reconfigure existing netconsole targets at runtime to be attached to newly-come-up interfaces that may not have existed when netconsole was loaded or when the targets were actually created. All this effectively enables us to get rid of custom ioctls. (3) Ultra-paranoid configfs attribute show() and store() operations, with sanity and input range checking, using only safe string primitives, and compliant with the recommendations in Documentation/filesystems/sysfs.txt. (4) A new function netpoll_print_options() is created in the netpoll API, that just prints out the configured parameters for a netpoll structure. netpoll_parse_options() is modified to use that and it is also exported to be used from netconsole. Signed-off-by: NSatyam Sharma <satyam@infradead.org> Acked-by: NKeiichi Kii <k-keiichi@bx.jp.nec.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Satyam Sharma 提交于
Based upon initial work by Keiichi Kii <k-keiichi@bx.jp.nec.com>. This patch introduces support for multiple targets, independent of CONFIG_NETCONSOLE_DYNAMIC -- this is useful even in the default case and (including the infrastructure introduced in previous patches) doesn't really add too many bytes to module text. All the complexity (and size) comes with the dynamic reconfigurability / userspace interface patch, and so it's plausible users may want to keep this enabled but that disabled (say to avoid a dependency on CONFIG_CONFIGFS_FS too). Also update documentation to mention the use of ";" separator to specify multiple logging targets in the boot/module option string. Brief overview: We maintain a target_list (and corresponding lock). Get rid of the static "default_target" and introduce allocation and release functions for our netconsole_target objects (but keeping sure to preserve previous behaviour such as default values). During init_netconsole(), ";" is used as the separator to identify multiple target specifications in the boot/module option string. The target specifications are parsed and netpolls setup. During exit, the target_list is torn down and all items released. Signed-off-by: NSatyam Sharma <satyam@infradead.org> Signed-off-by: NKeiichi Kii <k-keiichi@bx.jp.nec.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Satyam Sharma 提交于
Based upon initial work by Keiichi Kii <k-keiichi@bx.jp.nec.com>. To update fields of underlying netpoll structure at runtime on corresponding NETDEV_CHANGEADDR or NETDEV_CHANGENAME notifications. ioctl(SIOCSIFHWADDR or SIOCSIFNAME) could be used to change the hardware/MAC address or name of the local interface that our netpoll is attached to. Whenever this happens, netdev notifier chain is called out with the NETDEV_CHANGEADDR or NETDEV_CHANGENAME event message. We respond to that and update the local_mac or dev_name field of the struct netpoll. This makes sense anyway, but is especially required for dynamic netconsole because the netpoll structure's internal members become user visible files when either sysfs or configfs are used. So this helps us to keep up with the MAC address/name changes and keep values in struct netpoll uptodate. [ Note that ioctl(SIOCSIFADDR) to change IP address of interface at runtime is not handled (to update local_ip of netpoll) on purpose -- some setups may set the local_ip to a private address, not necessary the actual IP address of the sender host, as presently allowed. ] Signed-off-by: NSatyam Sharma <satyam@infradead.org> Signed-off-by: NKeiichi Kii <k-keiichi@bx.jp.nec.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Satyam Sharma 提交于
Based upon initial work by Keiichi Kii <k-keiichi@bx.jp.nec.com>. Introduce a wrapper structure over netpoll to represent logging targets configured in netconsole. This will get extended with other members in further patches. This is done independent of the (to-be-introduced) NETCONSOLE_DYNAMIC config option so that we're able to drastically cut down on the #ifdef complexity of final netconsole.c. Also, struct netconsole_target would be required for multiple targets support also, and not just dynamic reconfigurability. Signed-off-by: NSatyam Sharma <satyam@infradead.org> Signed-off-by: NKeiichi Kii <k-keiichi@bx.jp.nec.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Satyam Sharma 提交于
Based upon initial work by Keiichi Kii <k-keiichi@bx.jp.nec.com>. Add some useful general-purpose tips. Also suggest solution for the frequent problem of console loglevel set too low numerically (i.e. for high priority messages only) on the sender. Signed-off-by: NSatyam Sharma <satyam@infradead.org> Acked-by: NKeiichi Kii <k-keiichi@bx.jp.nec.com> Acked-by: NMatt Mackall <mpm@selenic.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Satyam Sharma 提交于
Based upon initial work by Keiichi Kii <k-keiichi@bx.jp.nec.com>. Avoid unnecessarily disabling interrupts and calling netpoll_send_udp() if the corresponding local interface is not up. Signed-off-by: NSatyam Sharma <satyam@infradead.org> Acked-by: NKeiichi Kii <k-keiichi@bx.jp.nec.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Satyam Sharma 提交于
Based upon initial work by Keiichi Kii <k-keiichi@bx.jp.nec.com>. Presently, boot/module parameters are set up quite differently for the case of built-in netconsole (__setup() -> obsolete_checksetup() -> netpoll_parse_options() -> strlen(config) == 0 in init_netconsole()) vs modular netconsole (module_param_string() -> string copied to the config variable -> strlen(config) != 0 init_netconsole() -> netpoll_parse_options()). This patch makes both of them similar by doing exactly the equivalent of a module_param_string() in option_setup() also -- just copying the param string passed from the kernel command line into "config" variable. So, strlen(config) != 0 in both cases, and netpoll_parse_options() is always called from init_netconsole(), thus making the setup logic for both cases similar. Now, option_setup() is only ever called / used for the built-in case, so we put it inside a #ifndef MODULE, otherwise gcc will complain about option_setup() being "defined but not used". Also, the "configured" variable is redundant with this patch and hence removed. Signed-off-by: NSatyam Sharma <satyam@infradead.org> Signed-off-by: NKeiichi Kii <k-keiichi@bx.jp.nec.com> Acked-by: NMatt Mackall <mpm@selenic.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Satyam Sharma 提交于
Based upon initial work by Keiichi Kii <k-keiichi@bx.jp.nec.com>. The (!np.dev) check in write_msg() is bogus (always false), because: np.dev is set by netpoll_setup(), which is called by init_netconsole() before register_console(), so write_msg() cannot be triggered unless netpoll_setup() successfully set np.dev. Also np.dev cannot go away from under us, because netpoll_setup() grabs us reference on it. So let's remove the bogus check. Signed-off-by: NSatyam Sharma <satyam@infradead.org> Acked-by: NKeiichi Kii <k-keiichi@bx.jp.nec.com> Acked-by: NMatt Mackall <mpm@selenic.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-