- 16 12月, 2009 2 次提交
-
-
由 Joe Perches 提交于
Signed-off-by: NJoe Perches <joe@perches.com> Cc: Neil Brown <neilb@suse.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 André Goddard Rosa 提交于
Makes use of skip_spaces() defined in lib/string.c for removing leading spaces from strings all over the tree. It decreases lib.a code size by 47 bytes and reuses the function tree-wide: text data bss dec hex filename 64688 584 592 65864 10148 (TOTALS-BEFORE) 64641 584 592 65817 10119 (TOTALS-AFTER) Also, while at it, if we see (*str && isspace(*str)), we can be sure to remove the first condition (*str) as the second one (isspace(*str)) also evaluates to 0 whenever *str == 0, making it redundant. In other words, "a char equals zero is never a space". Julia Lawall tried the semantic patch (http://coccinelle.lip6.fr) below, and found occurrences of this pattern on 3 more files: drivers/leds/led-class.c drivers/leds/ledtrig-timer.c drivers/video/output.c @@ expression str; @@ ( // ignore skip_spaces cases while (*str && isspace(*str)) { \(str++;\|++str;\) } | - *str && isspace(*str) ) Signed-off-by: NAndré Goddard Rosa <andre.goddard@gmail.com> Cc: Julia Lawall <julia@diku.dk> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Jeff Dike <jdike@addtoit.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Neil Brown <neilb@suse.de> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Cc: David Howells <dhowells@redhat.com> Cc: <linux-ext4@vger.kernel.org> Cc: Samuel Ortiz <samuel@sortiz.org> Cc: Patrick McHardy <kaber@trash.net> Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 14 12月, 2009 27 次提交
-
-
由 Dan Williams 提交于
Enable external metadata arrays to manage rebuild checkpointing via a md/dev-XXX/recovery_start attribute which reflects rdev->recovery_offset Also update resync_start_store to allow 'none' to be written, for consistency. Signed-off-by: NDan Williams <dan.j.williams@intel.com> Signed-off-by: NNeilBrown <neilb@suse.de>
-
由 Dan Williams 提交于
Other walks of this list are either under rcu_read_lock() or the list mutation lock (mddev_lock()). This protects against the improbable case of a disk being removed from the array at the start of md_do_sync(). Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
由 NeilBrown 提交于
As v1.x metadata can record that a member of the array is not completely recovered, it make sense to record that a spare has become a regular member of the array at the earliest opportunity. So remove the tests on "recovery_offset > 0" in super_1_sync as they really aren't needed, and schedule a metadata update immediately after adding spares to a degraded array. This means that if a crash happens immediately after a recovery starts, the new device will be included in the array and recovery will continue from wherever it was up to. Previously this didn't happen unless recovery was at least 1/16 of the way through. Signed-off-by: NNeilBrown <neilb@suse.de>
-
由 Arnd Bergmann 提交于
The RAID ioctls are only implemented in md.c, so the handling for them should also be moved there from fs/compat_ioctl.c. Signed-off-by: NArnd Bergmann <arnd@arndb.de> Cc: Neil Brown <neilb@suse.de> Cc: Andre Noll <maan@systemlinux.org> Cc: linux-raid@vger.kernel.org Signed-off-by: NNeilBrown <neilb@suse.de>
-
由 NeilBrown 提交于
Make it clear in the config message that MD_MULTIPATH is not under active development. Cc: Oren Held <orenhe@il.ibm.com> Signed-off-by: NNeilBrown <neilb@suse.de>
-
由 NeilBrown 提交于
Suggested by Oren Held <orenhe@il.ibm.com> Signed-off-by: NNeilBrown <neilb@suse.de>
-
由 Robert Becker 提交于
We've noticed severe lasting performance degradation of our raid arrays when we have drives that yield large amounts of media errors. The raid10 module will queue each failed read for retry, and also will attempt call fix_read_error() to perform the read recovery. Read recovery is performed while the array is frozen, so repeated recovery attempts can degrade the performance of the array for extended periods of time. With this patch I propose adding a per md device max number of corrected read attempts. Each rdev will maintain a count of read correction attempts in the rdev->read_errors field (not used currently for raid10). When we enter fix_read_error() we'll check to see when the last read error occurred, and divide the read error count by 2 for every hour since the last read error. If at that point our read error count exceeds the read error threshold, we'll fail the raid device. In addition in this patch I add sysfs nodes (get/set) for the per md max_read_errors attribute, the rdev->read_errors attribute, and added some printk's to indicate when fix_read_error fails to repair an rdev. For testing I used debugfs->fail_make_request to inject IO errors to the rdev while doing IO to the raid array. Signed-off-by: NRobert Becker <Rob.Becker@riverbed.com> Signed-off-by: NNeilBrown <neilb@suse.de>
-
由 Robert Becker 提交于
When we get a read error on a device in a RAID10, and attempting to repair the error fails, print more useful messages about why it failed. Signed-off-by: NRobert Becker <Rob.Becker@riverbed.com> Signed-off-by: NNeilBrown <neilb@suse.de>
-
由 NeilBrown 提交于
There is a sysfs file which allows bits in the write-intent bitmap to be explicit set - indicating that the block is thought to be 'dirty'. When this happens we should really set recovery_cp backwards to include the block to reflect this dirtiness. In particular, a 'resync' process will refuse to start if recovery_cp is beyond the end of the array, so this is needed to allow a resync to be triggered. Signed-off-by: NNeilBrown <neilb@suse.de>
-
由 NeilBrown 提交于
In this case, the metadata needs to not be in the same sector as the bitmap. md will not read/write any bitmap metadata. Config must be done via sysfs and when a recovery makes the array non-degraded again, writing 'true' to 'bitmap/can_clear' will allow bits in the bitmap to be cleared again. Signed-off-by: NNeilBrown <neilb@suse.de>
-
由 NeilBrown 提交于
Setting daemon_lastrun really has nothing to do with reading the bitmap superblock, it just happens to be needed at the same time. bitmap_read_sb is about to become options, so move that code out to after the call to bitmap_read_sb. Signed-off-by: NNeilBrown <neilb@suse.de>
-
由 NeilBrown 提交于
A new attribute directory 'bitmap' in 'md' is created which contains files for configuring the bitmap. 'location' identifies where the bitmap is, either 'none', or 'file' or 'sector offset from metadata'. Writing 'location' can create or remove a bitmap. Adding a 'file' bitmap this way is not yet supported. 'chunksize' and 'time_base' must be set before 'location' can be set. 'chunksize' can be set before creating a bitmap, but is currently always over-ridden by the bitmap superblock. 'time_base' and 'backlog' can be updated at any time. Signed-off-by: NNeilBrown <neilb@suse.de> Reviewed-by: NAndre Noll <maan@systemlinux.org>
-
由 NeilBrown 提交于
safe_delay_store can parse fixed point numbers (for fractions of a second). We will want to do that for another sysfs file soon, so factor out the code. Signed-off-by: NNeilBrown <neilb@suse.de>
-
由 NeilBrown 提交于
For md arrays were metadata is managed externally, the kernel does not know about a superblock so the superblock offset is 0. If we want to have a write-intent-bitmap near the end of the devices of such an array, we should support sector_t sized offset. We need offset be possibly negative for when the bitmap is before the metadata, so use loff_t instead. Also add sanity check that bitmap does not overlap with data. Signed-off-by: NNeilBrown <neilb@suse.de>
-
由 NeilBrown 提交于
As bitmap_create and bitmap_destroy already set thread->timeout as appropriate, there is no need to do it in raid10_quiesce. There is a possible need to wake the thread after the timeout has been set low, but it is better to do that where the timeout is actually set low, in bitmap_create. Signed-off-by: NNeilBrown <neilb@suse.de>
-
由 NeilBrown 提交于
This removes a lot of multiplications by HZ. Signed-off-by: NNeilBrown <neilb@suse.de>
-
由 NeilBrown 提交于
... and into bitmap_info. These are all configuration parameters that need to be set before the bitmap is created. Signed-off-by: NNeilBrown <neilb@suse.de>
-
由 NeilBrown 提交于
In preparation for making bitmap fields configurable via sysfs, start tidying up by making a single structure to contain the configuration fields. Signed-off-by: NNeilBrown <neilb@suse.de>
-
由 NeilBrown 提交于
A 2-device raid5 array can now be converted to raid1. Signed-off-by: NNeilBrown <neilb@suse.de>
-
由 NeilBrown 提交于
This will allow us to stop writeout to portions of the array while they are resynced by someone else - e.g. another node in a cluster. Signed-off-by: NNeilBrown <neilb@suse.de>
-
由 NeilBrown 提交于
The post-barrier-flush is sent by md as soon as make_request on the barrier write completes. For raid5, the data might not be in the per-device queues yet. So for barrier requests, wait for any pre-reading to be done so that the request will be in the per-device queues. We use the 'preread_active' count to check that nothing is still in the preread phase, and delay the decrement of this count until after write requests have been submitted to the underlying devices. Signed-off-by: NNeilBrown <neilb@suse.de>
-
由 NeilBrown 提交于
Previously barriers were only supported on RAID1. This is because other levels requires synchronisation across all devices and so needed a different approach. Here is that approach. When a barrier arrives, we send a zero-length barrier to every active device. When that completes - and if the original request was not empty - we submit the barrier request itself (with the barrier flag cleared) and then submit a fresh load of zero length barriers. The barrier request itself is asynchronous, but any subsequent request will block until the barrier completes. The reason for clearing the barrier flag is that a barrier request is allowed to fail. If we pass a non-empty barrier through a striping raid level it is conceivable that part of it could succeed and part could fail. That would be way too hard to deal with. So if the first run of zero length barriers succeed, we assume all is sufficiently well that we send the request and ignore errors in the second run of barriers. RAID5 needs extra care as write requests may not have been submitted to the underlying devices yet. So we flush the stripe cache before proceeding with the barrier. Note that the second set of zero-length barriers are submitted immediately after the original request is submitted. Thus when a personality finds mddev->barrier to be set during make_request, it should not return from make_request until the corresponding per-device request(s) have been queued. That will be done in later patches. Signed-off-by: NNeilBrown <neilb@suse.de> Reviewed-by: NAndre Noll <maan@systemlinux.org>
-
由 NeilBrown 提交于
If a resync/recovery/check/repair is interrupted for some reason, it can be useful to know exactly where it got up to. So in that case, do not clear curr_resync_completed. Initialise it when starting a resync/recovery/... instead. Signed-off-by: NNeilBrown <neilb@suse.de>
-
由 NeilBrown 提交于
When a 'check' or 'repair' finished we should clear resync_min so that a future check/repair will cover the whole array (by default). However if it is interrupted, we should update resync_min to where we got up to, so that when the check/repair continues it just does the remainder of the array. Signed-off-by: NNeilBrown <neilb@suse.de>
-
由 NeilBrown 提交于
Signed-off-by: NNeilBrown <neilb@suse.de>
-
由 NeilBrown 提交于
qd_idx is previously declared and given exactly the same value! Signed-off-by: NNeilBrown <neilb@suse.de>
-
由 NeilBrown 提交于
A write intent bitmap can be removed from an array while the array is active. When this happens, all IO is suspended and flushed before the bitmap is removed. However it is possible that bitmap_daemon_work is still running to clear old bits from the bitmap. If it is, it can dereference the bitmap after it has been freed. So introduce a new mutex to protect bitmap_daemon_work and get it before destroying a bitmap. This is suitable for any current -stable kernel. Signed-off-by: NNeilBrown <neilb@suse.de> Cc: stable@kernel.org
-
- 11 12月, 2009 11 次提交
-
-
由 Mikulas Patocka 提交于
If the snapshot we are merging became invalid (e.g. it ran out of space) redirect all I/O directly to the origin device. Signed-off-by: NMikulas Patocka <mpatocka@redhat.com> Reviewed-by: NMike Snitzer <snitzer@redhat.com> Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
-
由 Mike Snitzer 提交于
Set 'merge_failed' flag if a snapshot fails to merge. Update snapshot_status() to report "Merge failed" if 'merge_failed' is set. Signed-off-by: NMike Snitzer <snitzer@redhat.com> Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
-
由 Mike Snitzer 提交于
s->store->type->prepare_merge returns the number of chunks that can be copied linearly working backwards from the returned chunk number. For example, if it returns 3 chunks with old_chunk == 10 and new_chunk == 20, then chunk 20 can be copied to 10, chunk 19 to 9 and 18 to 8. Until now kcopyd only copied one chunk at a time. This patch now copies the full set at once. Consequently, snapshot_merge_process() needs to delay the merging of all chunks if any have writes in progress, not just the first chunk in the region that is to be merged. snapshot-merge's performance is now comparable to the original snapshot-origin target. Signed-off-by: NMike Snitzer <snitzer@redhat.com> Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
-
由 Mikulas Patocka 提交于
When there is one merging snapshot and other non-merging snapshots, snapshot_merge_process() must make exceptions in the non-merging snapshots. Use a sequence count to resolve the race between I/O to chunks that are about to be merged. The count increases each time an exception reallocation finishes. Use wait_event() to wait until the count changes. Signed-off-by: NMikulas Patocka <mpatocka@redhat.com> Signed-off-by: NMike Snitzer <snitzer@redhat.com> Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
-
由 Mikulas Patocka 提交于
Track writes to chunks that are currently being merged and delay merging a chunk until all writes to that chunk finish. Signed-off-by: NMikulas Patocka <mpatocka@redhat.com> Reviewed-by: NMike Snitzer <snitzer@redhat.com> Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
-
由 Mikulas Patocka 提交于
While a set of chunks is being merged, any overlapping writes need to be queued. Signed-off-by: NMikulas Patocka <mpatocka@redhat.com> Signed-off-by: NMike Snitzer <snitzer@redhat.com> Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
-
由 Mikulas Patocka 提交于
Merging is started when origin is resumed and it is stopped when origin is suspended or when the merging snapshot is destroyed or errors are detected. Merging is not yet interlocked with writes: this will be handled in subsequent patches. The code relies on callbacks from a private kcopyd thread. Signed-off-by: NMikulas Patocka <mpatocka@redhat.com> Signed-off-by: NMike Snitzer <snitzer@redhat.com> Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
-
由 Mikulas Patocka 提交于
Merging more than one snapshot is not supported, so prevent this happening. Signed-off-by: NMikulas Patocka <mpatocka@redhat.com> Signed-off-by: NMike Snitzer <snitzer@redhat.com> Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
-
由 Mike Snitzer 提交于
Sets num_flush_requests=2 to support flushing both the origin and cow devices used by the snapshot-merge target. Also, snapshot_ctr() now gets the origin device using FMODE_WRITE if the target is snapshot-merge (which writes to the origin device). Signed-off-by: NMike Snitzer <snitzer@redhat.com> Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
-
由 Mikulas Patocka 提交于
The snapshot-merge target should not allocate new exceptions because the intent is to merge all of its exceptions as quickly and safely as possible. This patch introduces the snapshot-merge mapping function and updates __origin_write() so that it doesn't allocate exceptions on any snapshots that are being merged. If a write request to a merging snapshot device is to be dispatched directly to the origin (because the chunk is not remapped or was already merged), snapshot_merge_map() must make exceptions in other snapshots so calls do_origin(). Signed-off-by: NMikulas Patocka <mpatocka@redhat.com> Signed-off-by: NMike Snitzer <snitzer@redhat.com> Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
-
由 Mikulas Patocka 提交于
To track the completion of exceptions relating to the same location on the device, the current code selects one exception as primary_pe, links the other exceptions to it and uses reference counting to wait until all the reallocations are complete. It is considered too complicated to extend this code to handle the new snapshot-merge target, where sets of non-overlapping chunks would also need to become linked. Instead, a simpler (but less efficient) approach is taken. Bios are linked to one exception. When it completes, bios are simply retried, and if other related exceptions are still outstanding, they'll get queued again to wait for another one. Signed-off-by: NMikulas Patocka <mpatocka@redhat.com> Signed-off-by: NMike Snitzer <snitzer@redhat.com> Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
-