- 31 3月, 2011 8 次提交
-
-
由 Yevgeny Petrilin 提交于
In case of allocation failure, tried to use the promiscuous QP entry that was previously freed. Now freeing this entry only in case we will not put it back to the list of promiscuous entries. Reported-by: NDan Carpenter <error27@gmail.com> Signed-off-by: NYevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Peter Pan(潘卫平) 提交于
use accumulates instead of acumulates. Signed-off-by: NPan Weiping <panweiping3@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Like DCCP and other similar pieces of code, there are mechanisms here to try allocating smaller hash tables if the allocation fails. So pass in __GFP_NOWARN like the others do instead of emitting a scary message. Reported-by: NDave Jones <davej@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
Commits 01a16b21 (netlink: kill eff_cap from struct netlink_skb_parms) and c53fa1ed (netlink: kill loginuid/sessionid/sid members from struct netlink_skb_parms) removed some members from struct netlink_skb_parms that depend on the current context, all netlink users are now required to do synchronous message processing. connector however queues received messages and processes them in a work queue, which is not valid anymore. This patch converts connector to do synchronous message processing by invoking the registered callback handler directly from the netlink receive function. In order to avoid invoking the callback with connector locks held, a reference count is added to struct cn_callback_entry, the reference is taken when finding a matching callback entry on the device's queue_list and released after the callback handler has been invoked. Signed-off-by: NPatrick McHardy <kaber@trash.net> Acked-by: NEvgeniy Polyakov <zbr@ioremap.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Daniel J Blueman reported a lockdep splat in trie_firstleaf(), caused by RTNL being not locked before a call to fib_table_flush() Reported-by: NDaniel J Blueman <daniel.blueman@gmail.com> Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Philip A. Prindeville 提交于
Don't flap VCs when carrier state changes; higher-level protocols can detect loss of connectivity and act accordingly. This is more consistent with how other network interfaces work. We no longer use release_vccs() so we can delete it. release_vccs() was duplicated from net/atm/common.c; make the corresponding function exported, since other code duplicates it and could leverage it if it were public. Signed-off-by: NPhilip A. Prindeville <philipp@redfish-solutions.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Philip A. Prindeville 提交于
Omit pkt_hdr preamble when dumping transmitted packet as hex-dump; we can pull this up because the frame has already been sent, and dumping it is the last thing we do with it before freeing it. Also include the size, vpi, and vci in the debug as is done on receive. Use "port" consistently instead of "device" intermittently. Signed-off-by: NPhilip Prindeville <philipp@redfish-solutions.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Philip A. Prindeville 提交于
Use VPI.VCI notation consistently throughout the module. This is the one remaining place where the VCI is used before the VPI in any output. Signed-off-by: NPhilip Prindeville <philipp@redfish-solutions.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 30 3月, 2011 19 次提交
-
-
由 Jesper Juhl 提交于
We leak in some error paths of drivers/net/atlx/atl2.c:atl2_set_eeprom(). The memory allocated to 'eeprom_buff' is not freed when we return -EIO. This patch fixes that up and also removes a pointless explicit cast. Signed-off-by: NJesper Juhl <jj@chaosbits.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Daniel Lezcano 提交于
In case the device where is coming from the packet has TSO enabled, we should not check the mtu size value as this one could be bigger than the expected value. This is the case for the macvlan driver when the lower device has TSO enabled. The macvlan inherit this feature and forward the packets without fragmenting them. Then the packets go through dev_forward_skb and are dropped. This patch fix this by checking TSO is not enabled when we want to check the mtu size. Signed-off-by: NDaniel Lezcano <daniel.lezcano@free.fr> Acked-by: N"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Andrzej Zaborowski 提交于
This adds a driver for the CDC Ethernet part of this modem. The device's ID is blacklisted in cdc_ether.c and is white-listed in this new driver because of the quirks needed to make it useful. The modem's firmware exposes a CDC ACM port for modem control and a CDC Ethernet port for network data. The descriptors look fine but both ports actually are some sort of multiplexers requiring non- standard headers added/removed from every packet or they get ignored. All information is based on a usb traffic log from a Windows machine. On the Verizon 4G network I've seen speeds up to 1.1MB/s so far with this driver, a speed-o-meter site reports 16.2Mbps/10.5Mbps. Userspace scripts are required to talk to the CDC ACM port. Signed-off-by: NAndrzej Zaborowski <balrogg@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Marc Kleine-Budde 提交于
The function phy_attach_direct attaches the phy and calls phy_init_hw. phy_init_hw can fail, but the phy is still marked as attached. Successive calls to phy_attach_direct will fail because the phy is busy. [ 1.020000] eth0: Freescale FEC PHY driver [Generic PHY] (mii_bus:phy_addr=1:00, irq=-1) [ 1.030000] eth1: Freescale FEC PHY driver [Generic PHY] (mii_bus:phy_addr=1:01, irq=-1) [ 2.050000] Sending DHCP requests . [ 3.020000] PHY: 1:00 - Link is Up - 100/Full [ 5.110000] ..... timed out! [ 87.660000] IP-Config: Reopening network devices... [ 88.190000] FEC: MDIO read timeout [ 88.190000] eth0: could not attach to PHY [ 88.190000] IP-Config: Failed to open eth0 [ 88.210000] FEC: MDIO read timeout [ 88.210000] eth1: could not attach to PHY [ 88.210000] IP-Config: Failed to open eth1 [ 88.220000] IP-Config: No network devices available. [ 88.220000] Freeing init memory: 6968K [...] starting network interfaces... ip: RTNETLINK answers: File exists [ 94.000000] net eth0: PHY already attached [ 94.010000] eth0: could not attach to PHY ip: SIOCSIFFLAGS: Device or resource busy This patch adds phy_detach to clean up if phy_init_hw fails. Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Linus Lüssing 提交于
"len = ntohs(ip6h->payload_len)" does not include the length of the ipv6 header itself, which the rest of this function assumes, though. This leads to a length check less restrictive as it should be in the following line for one thing. For another, it very likely leads to an integer underrun when substracting the offset and therefore to a very high new value of 'len' due to its unsignedness. This will ultimately lead to the pskb_trim_rcsum() practically never being called, even in the cases where it should. Signed-off-by: NLinus Lüssing <linus.luessing@web.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ben Hutchings 提交于
via-ircc has been passing a NULL pointer to DMA allocation functions, which is completely invalid and results in a BUG on PowerPC. Now that we always have the device pointer available, pass it in. Reference: http://bugs.debian.org/619450Reported-by: NAndrew Buckeridge <andrewb@bgc.com.au> Signed-off-by: NBen Hutchings <ben@decadent.org.uk> Tested-by: Andrew Buckeridge <andrewb@bgc.com.au> [against 2.6.32] Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ben Hutchings 提交于
via-ircc still maintains its own array of device pointers in Linux 2.4 style. Worse, it always uses index 0, so it will crash if there are multiple suitable devices in the system. Signed-off-by: NBen Hutchings <ben@decadent.org.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Timo Teräs 提交于
My commit 6d55cb91 (gre: fix hard header destination address checking) broke multicast. The reason is that ip_gre used to get ipgre_header() calls with zero destination if we have NOARP or multicast destination. Instead the actual target was decided at ipgre_tunnel_xmit() time based on per-protocol dissection. Instead of allowing the "abuse" of ->header() calls with invalid destination, this creates multicast mappings for ip_gre. This also fixes "ip neigh show nud noarp" to display the proper multicast mappings used by the gre device. Reported-by: NDoug Kehn <rdkehn@yahoo.com> Signed-off-by: NTimo Teräs <timo.teras@iki.fi> Acked-by: NDoug Kehn <rdkehn@yahoo.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Balaji G 提交于
net/bridge/br_stp_if.c: In function ‘br_stp_recalculate_bridge_id’: net/bridge/br_stp_if.c:216:3: warning: ‘return’ with no value, in function returning non-void Signed-off-by: NG.Balaji <balajig81@gmail.com> Acked-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
After commit a715dea3 ("net: Always allocate at least 16 skb frags regardless of page size"), the value of MAX_SKB_FRAGS can now take on either an "unsigned long" or an "int" value. This causes warnings like: net/packet/af_packet.c: In function ‘tpacket_fill_skb’: net/packet/af_packet.c:948: warning: format ‘%lu’ expects type ‘long unsigned int’, but argument 2 has type ‘int’ Fix by forcing the constant to be unsigned long, otherwise we have a situation where the type of a system wide constant is variable. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Linus Torvalds 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (26 commits) mmc: SDHI should depend on SUPERH || ARCH_SHMOBILE mmc: tmio_mmc: Move some defines into a shared header mmc: tmio: support aggressive clock gating mmc: tmio: fix power-mode interpretation mmc: tmio: remove work-around for unmasked SDIO interrupts sh: fix SDHI IO address-range ARM: mach-shmobile: fix SDHI IO address-range mmc: tmio: only access registers above 0xff, if available mfd: remove now redundant sh_mobile_sdhi.h header sh: convert boards to use linux/mmc/sh_mobile_sdhi.h ARM: mach-shmobile: convert boards to use linux/mmc/sh_mobile_sdhi.h mmc: tmio: convert the SDHI MMC driver from MFD to a platform driver sh: ecovec: use the CONFIG_MMC_TMIO symbols instead of MFD mmc: tmio: split core functionality, DMA and MFD glue mmc: tmio: use PIO for short transfers mmc: tmio-mmc: Improve DMA stability on sh-mobile mmc: fix mmc_app_send_scr() for dma transfer mmc: sdhci-esdhc: enable esdhc on imx53 mmc: sdhci-esdhc: use writel/readl as general APIs mmc: sdhci: add the abort CMDTYPE bits definition ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-2.6-frv由 Linus Torvalds 提交于
* 'frv' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-2.6-frv: FRV: Use generic show_interrupts() FRV: Convert genirq namespace frv: Select GENERIC_HARDIRQS_NO_DEPRECATED frv: Convert cpu irq_chip to new functions frv: Convert mb93493 irq_chip to new functions frv: Convert mb93093 irq_chip to new function frv: Convert mb93091 irq_chip to new functions frv: Fix typo from __do_IRQ overhaul frv: Remove stale irq_chip.end FRV: Do some cleanups FRV: Missing node arg in alloc_thread_info_node() macro NOMMU: implement access_remote_vm NOMMU: support SMP dynamic percpu_alloc NOMMU: percpu should use is_vmalloc_addr().
-
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen由 Linus Torvalds 提交于
* 'stable/bug-fixes-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen: Use new irq_move functions xen: Convert genirq namespace xen: fix p2m section mismatches xen/p2m: Allocate p2m tracking pages on override xen-gntdev: unlock on error path in gntdev_mmap() xen-gntdev: return -EFAULT on copy_to_user failure
-
git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog: watchdog: softdog.c: enhancement to optionally invoke panic instead of reboot on timer expiry watchdog: fix nv_tco section mismatch watchdog: sp5100_tco.c: Check if firmware has set correct value in tcobase. watchdog: Convert release_resource to release_region/release_mem_region watchdog: s3c2410_wdt.c: Convert release_resource to release_region/release_mem_region
-
git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: amd64_edac: Fix potential memleak
-
由 Linus Torvalds 提交于
Merge branch 'irq-final-for-linus-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'irq-final-for-linus-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (111 commits) gpio: ab8500: Mark broken genirq: Remove move_*irq leftovers genirq: Remove compat code drivers: Final irq namespace conversion mn10300: Use generic show_interrupts() mn10300: Cleanup irq_desc access mn10300: Convert genirq namespace frv: Use generic show_interrupts() frv: Convert genirq namespace frv: Select GENERIC_HARDIRQS_NO_DEPRECATED frv: Convert cpu irq_chip to new functions frv: Convert mb93493 irq_chip to new functions frv: Convert mb93093 irq_chip to new function frv: Convert mb93091 irq_chip to new functions frv: Fix typo from __do_IRQ overhaul frv: Remove stale irq_chip.end m68k: Convert irq function namespace xen: Use new irq_move functions xen: Cleanup genirq namespace unicore32: Use generic show_interrupts() ...
-
由 Peter Huewe 提交于
This patch fixes information leakage to the userspace by initializing the data buffer to zero. Reported-by: NPeter Huewe <huewe.external@infineon.com> Signed-off-by: NPeter Huewe <huewe.external@infineon.com> Signed-off-by: NMarcel Selhorst <m.selhorst@sirrix.com> [ Also removed the silly "* sizeof(u8)". If that isn't 1, we have way deeper problems than a simple multiplication can fix. - Linus ] Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Borislav Petkov 提交于
We check the pointers together but at least one of them could be invalid due to failed allocation. Since we cannot continue if either of the two allocations has failed, exit early by freeing them both. Cc: <stable@kernel.org> # 38.x Reported-by: NMauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: NBorislav Petkov <borislav.petkov@amd.com>
-
- 29 3月, 2011 13 次提交
-
-
由 Dave Chinner 提交于
Fix the incorrect use of igrab() inside the i_lock in NFS and Ceph‥ If we are already holding the i_lock, we have a reference to the inode so we can safely use ihold() to gain an extra reference. This avoids hangs due to lock recursion on the i_lock now that the inode_lock is gone and igrab() uses the i_lock itself. Signed-off-by: NDave Chinner <dchinner@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Cc: Ryan Mallon <ryan@bluewatersys.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (30 commits) xfrm: Restrict extended sequence numbers to esp xfrm: Check for esn buffer len in xfrm_new_ae xfrm: Assign esn pointers when cloning a state xfrm: Move the test on replay window size into the replay check functions netdev: bfin_mac: document TE setting in RMII modes drivers net: Fix declaration ordering in inline functions. cxgb3: Apply interrupt coalescing settings to all queues net: Always allocate at least 16 skb frags regardless of page size ipv4: Don't ip_rt_put() an error pointer in RAW sockets. net: fix ethtool->set_flags not intended -EINVAL return value mlx4_en: Fix loss of promiscuity tg3: Fix inline keyword usage tg3: use <linux/io.h> and <linux/uaccess.h> instead <asm/io.h> and <asm/uaccess.h> net: use CHECKSUM_NONE instead of magic number Net / jme: Do not use legacy PCI power management myri10ge: small rx_done refactoring bridge: notify applications if address of bridge device changes ipv4: Fix IP timestamp option (IPOPT_TS_PRESPEC) handling in ip_options_echo() can: c_can: Fix tx_bytes accounting can: c_can_platform: fix irq check in probe ...
-
由 Thomas Gleixner 提交于
These functions take irq_data as an argument and avoid a redundant lookup in the sparse irq case. Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Cc: Ian Campbell <ian.campbell@citrix.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
由 Thomas Gleixner 提交于
Converted with coccinelle. Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Acked-by: NIan Campbell <ian.campbell@citrix.com> Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
由 Randy Dunlap 提交于
Fix section mismatch warnings: set_phys_range_identity() is called by __init xen_set_identity(), so also mark set_phys_range_identity() as __init. then: __early_alloc_p2m() is called set_phys_range_identity(), so also mark __early_alloc_p2m() as __init. WARNING: arch/x86/built-in.o(.text+0x7856): Section mismatch in reference from the function __early_alloc_p2m() to the function .init.text:extend_brk() The function __early_alloc_p2m() references the function __init extend_brk(). This is often because __early_alloc_p2m lacks a __init annotation or the annotation of extend_brk is wrong. WARNING: arch/x86/built-in.o(.text+0x7967): Section mismatch in reference from the function set_phys_range_identity() to the function .init.text:extend_brk() The function set_phys_range_identity() references the function __init extend_brk(). This is often because set_phys_range_identity lacks a __init annotation or the annotation of extend_brk is wrong. [v2: Per Stephen Hemming recommonedation made __early_alloc_p2m static] Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
由 Thomas Gleixner 提交于
Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NDavid Howells <dhowells@redhat.com>
-
由 Thomas Gleixner 提交于
Convert to new function names. Converted with coccinelle. Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NDavid Howells <dhowells@redhat.com>
-
由 Thomas Gleixner 提交于
All chips converted Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NDavid Howells <dhowells@redhat.com>
-
由 Thomas Gleixner 提交于
Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NDavid Howells <dhowells@redhat.com>
-
由 Thomas Gleixner 提交于
Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NDavid Howells <dhowells@redhat.com>
-
由 Thomas Gleixner 提交于
Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NDavid Howells <dhowells@redhat.com>
-
由 Thomas Gleixner 提交于
Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NDavid Howells <dhowells@redhat.com>
-
由 Thomas Gleixner 提交于
Compiles way better. Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NDavid Howells <dhowells@redhat.com>
-