- 27 4月, 2009 2 次提交
-
-
由 Linus Torvalds 提交于
Look at the: diff -u arch/x86/boot/compressed/vmlinux_*.lds output and realize that they're basially exactly the same except for trivial naming differences, and the fact that the 64-bit version has a "pgtable" thing. So unify them. There's some trivial cleanup there (make the output format a Kconfig thing rather than doing #ifdef's for it, and unify both 32-bit and 64-bit BSS end to "_ebss", where 32-bit used to use the traditional "_end"), but other than that it's really very mindless and straigt conversion. For example, I think we should aim to remove "startup_32" vs "startup_64", and just call it "startup", and get rid of one more difference. I didn't do that. Also, notice the comment in the unified vmlinux.lds.S talks about "head_64" and "startup_32" which is an odd and incorrect mix, but that was actually what the old 64-bit only lds file had, so the confusion isn't new, and now that mixing is arguably more accurate thanks to the vmlinux.lds.S file being shared between the two cases ;) [ Impact: cleanup, unification ] Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org> Acked-by: NSam Ravnborg <sam@ravnborg.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Sam Ravnborg 提交于
Beautify vmlinux_64.lds.S: - Use tabs for indent - Located curly braces like in C code - Rearranged a few comments There is no functional changes in this patch The beautification is done to prepare a unification of the _32 and the _64 variants of the linker scripts. [ Impact: cleanup ] Signed-off-by: NSam Ravnborg <sam@ravnborg.org> Cc: Tim Abbott <tabbott@MIT.EDU> Cc: Linus Torvalds <torvalds@linux-foundation.org> LKML-Reference: <20090426210742.GA3464@uranus.ravnborg.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 17 4月, 2009 1 次提交
-
-
由 Sam Ravnborg 提交于
Introducing this Kbuild file allow us to: make arch/x86/ And thus building all the core part of x86. Signed-off-by: NSam Ravnborg <sam@ravnborg.org> Cc: Jaswinder Singh Rajput <jaswinder@kernel.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 16 4月, 2009 3 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ALSA: hda - Fix the cmd cache keys for amp verbs ALSA: add missing definitions(letters) to HD-Audio.txt ALSA: hda - Add quirk mask for Fujitsu Amilo laptops with ALC883 [ALSA] intel8x0: add one retry to the ac97_clock measurement routine [ALSA] intel8x0: fix wrong conditions in ac97_clock measure routine ALSA: hda - Avoid call of snd_jack_report at release ALSA: add private_data to struct snd_jack ALSA: snd-usb-caiaq: rename files to remove redundant information in file pathes ALSA: snd-usb-caiaq: clean up header includes ALSA: sound/pci: use memdup_user() ALSA: sound/usb: use memdup_user() ALSA: sound/isa: use memdup_user() ALSA: sound/core: use memdup_user() [ALSA] intel8x0: do not use zero value from PICB register [ALSA] intel8x0: an attempt to make ac97_clock measurement more reliable [ALSA] pcm-midlevel: Add more strict buffer position checks based on jiffies [ALSA] hda_intel: fix unexpected ring buffer positions ASoC: Disable S3C64xx support in Kconfig ASoC: magician: remove un-necessary #include of pxa-regs.h and hardware.h
-
git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-fixes由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-fixes: GFS2: Use DEFINE_SPINLOCK GFS2: cleanup file_operations mess GFS2: Move umount flush rwsem GFS2: Fix symlink creation race GFS2: Make quotad's waiting interruptible
-
git://git.kernel.dk/linux-2.6-block由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: (28 commits) cfq-iosched: add close cooperator code cfq-iosched: log responsible 'cfqq' in idle timer arm cfq-iosched: tweak kick logic a bit more cfq-iosched: no need to save interrupts in cfq_kick_queue() brd: fix cacheflushing brd: support barriers swap: Remove code handling bio_alloc failure with __GFP_WAIT gfs2: Remove code handling bio_alloc failure with __GFP_WAIT ext4: Remove code handling bio_alloc failure with __GFP_WAIT dio: Remove code handling bio_alloc failure with __GFP_WAIT block: Remove code handling bio_alloc failure with __GFP_WAIT bio: add documentation to bio_alloc() splice: add helpers for locking pipe inode splice: remove generic_file_splice_write_nolock() ocfs2: fix i_mutex locking in ocfs2_splice_to_file() splice: fix i_mutex locking in generic_splice_write() splice: remove i_mutex locking in splice_from_pipe() splice: split up __splice_from_pipe() block: fix SG_IO to return a proper error value cfq-iosched: don't delay queue kick for a merged request ...
-
- 15 4月, 2009 34 次提交
-
-
由 Takashi Iwai 提交于
* topic/hda: ALSA: hda - Fix the cmd cache keys for amp verbs ALSA: add missing definitions(letters) to HD-Audio.txt
-
由 Takashi Iwai 提交于
Fix the key value generation for get/set amp verbs. The upper bits of the parameter have to be combined with the verb value to be unique for each direction/index of amp access. This fixes the resume problem on some hardwares like Macbook after the channel mode is changed. Tested-by: NJohannes Berg <johannes@sipsolutions.net> Cc: <stable@kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc由 Linus Torvalds 提交于
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: powerpc: pseries/dtl.c should include asm/firmware.h powerpc: Fix data-corrupting bug in __futex_atomic_op powerpc/pseries: Set error_state to pci_channel_io_normal in eeh_report_reset() powerpc: Allow 256kB pages with SHMEM powerpc: Document new FSL I2C bindings and cleanup powerpc/mm: Fix compile warning powerpc/85xx: TQM8548: update defconfig powerpc/85xx: TQM8548: use proper phy-handles for enet2 and enet3 powerpc/85xx: TQM85xx: correct address of LM75 I2C device nodes powerpc: Add support for early tlbilx opcode powerpc: Fix tlbilx opcode
-
由 Linus Torvalds 提交于
It turns out that 'smp_call_function_many()' doesn't work at all like 'smp_call_function_single()', and my change to Andrew's patch to use it rather than a loop over all CPU's acpi-cpufreq doesn't work. My bad. 'smp_call_function_many()' has two "features" (aka "documented bugs"): (a) it needs to be called with preemption disabled, because it uses smp_processor_id() without guarding the CPU lookup with 'get_cpu()' and 'put_cpu()' like the 'single' variant does. (b) even if the current CPU is part of the CPU mask, it won't do the call on that CPU. Still, we're better off trying to use 'smp_call_function_many()' than looping over CPU's, since it at least in theory allows us to use a broadcast IPI and do it all in parallel. So let's just work around the silly semantic bugs in that function. Reported-and-tested-by: NAli Gholami Rudi <ali@rudi.ir> Cc: Ingo Molnar <mingo@elte.hu> Cc: Andrew Morton <akpm@linux-foundation.org>, Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Dave Jones <davej@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jens Axboe 提交于
If we have processes that are working in close proximity to each other on disk, we don't want to idle wait. Instead allow the close process to issue a request, getting better aggregate bandwidth. The anticipatory scheduler has similar checks, noop and deadline do not need it since they don't care about process <-> io mappings. The code for CFQ is a little more involved though, since we split request queues into per-process contexts. This fixes a performance problem with eg dump(8), since it uses several processes in some silly attempt to speed IO up. Even if dump(8) isn't really a valid case (it should be fixed by using CLONE_IO), there are other cases where we see close processes and where idling ends up hurting performance. Credit goes to Jeff Moyer <jmoyer@redhat.com> for writing the initial implementation. Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 Jens Axboe 提交于
Makes it easier to read the traces. Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 Jens Axboe 提交于
We only kick the dispatch for an idling queue, if we think it's a (somewhat) fully merged request. Also allow a kick if we have other busy queues in the system, since we don't want to risk waiting for a potential merge in that case. It's better to get some work done and proceed. Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 Jens Axboe 提交于
It's called from the workqueue handlers from process context, so we always have irqs enabled when entered. Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 Nick Piggin 提交于
brd is missing a flush_dcache_page. On 2nd thoughts, perhaps it is the pagecache's responsibility to flush user virtual aliases (the driver of course should flush kernel virtual mappings)... but anyway, there already exists cache flushing for one direction of transfer, so we should add the other. Signed-off-by: NNick Piggin <npiggin@suse.de> Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 Nick Piggin 提交于
brd is always ordered (not that it matters, as it is defined not to survive when the system goes down). So tell the block layer it is ordered, which might be of help with testing filesystems. Signed-off-by: NNick Piggin <npiggin@suse.de> Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 Nikanth Karthikesan 提交于
Remove code handling bio_alloc failure with __GFP_WAIT. Signed-off-by: NNikanth Karthikesan <knikanth@suse.de> Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 Nikanth Karthikesan 提交于
Remove code handling bio_alloc failure with __GFP_WAIT. GFP_NOFS implies __GFP_WAIT. Signed-off-by: NNikanth Karthikesan <knikanth@suse.de> Acked-by: NSteven Whitehouse <swhiteho@redhat.com> Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 Nikanth Karthikesan 提交于
Remove code handling bio_alloc failure with __GFP_WAIT. GFP_NOIO implies __GFP_WAIT. Signed-off-by: NNikanth Karthikesan <knikanth@suse.de> Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 Nikanth Karthikesan 提交于
Remove code handling bio_alloc failure with __GFP_WAIT. GFP_KERNEL implies __GFP_WAIT. Signed-off-by: NNikanth Karthikesan <knikanth@suse.de> Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 Nikanth Karthikesan 提交于
Remove code handling bio_alloc failure with __GFP_WAIT. GFP_KERNEL implies __GFP_WAIT. Signed-off-by: NNikanth Karthikesan <knikanth@suse.de> Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 Jens Axboe 提交于
Explain that with __GFP_WAIT set it will not fail, and that the caller must never allocate more than 1 bio at the time. Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 Miklos Szeredi 提交于
There are lots of sequences like this, especially in splice code: if (pipe->inode) mutex_lock(&pipe->inode->i_mutex); /* do something */ if (pipe->inode) mutex_unlock(&pipe->inode->i_mutex); so introduce helpers which do the conditional locking and unlocking. Also replace the inode_double_lock() call with a pipe_double_lock() helper to avoid spreading the use of this functionality beyond the pipe code. This patch is just a cleanup, and should cause no behavioral changes. Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz> Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 Miklos Szeredi 提交于
Remove the now unused generic_file_splice_write_nolock() function. It's conceptually broken anyway, because splice may need to wait for pipe events so holding locks across the whole operation is wrong. Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz> Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 Miklos Szeredi 提交于
Rearrange locking of i_mutex on destination and call to ocfs2_rw_lock() so locks are only held while buffers are copied with the pipe_to_file() actor, and not while waiting for more data on the pipe. Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz> Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 Miklos Szeredi 提交于
Rearrange locking of i_mutex on destination so it's only held while buffers are copied with the pipe_to_file() actor, and not while waiting for more data on the pipe. Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz> Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 Miklos Szeredi 提交于
splice_from_pipe() is only called from two places: - generic_splice_sendpage() - splice_write_null() Neither of these require i_mutex to be taken on the destination inode. Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz> Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 Miklos Szeredi 提交于
Split up __splice_from_pipe() into four helper functions: splice_from_pipe_begin() splice_from_pipe_next() splice_from_pipe_feed() splice_from_pipe_end() splice_from_pipe_next() will wait (if necessary) for more buffers to be added to the pipe. splice_from_pipe_feed() will feed the buffers to the supplied actor and return when there's no more data available (or if all of the requested data has been copied). This is necessary so that implementations can do locking around the non-waiting splice_from_pipe_feed(). This patch should not cause any change in behavior. Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz> Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 FUJITA Tomonori 提交于
blk_rq_unmap_user() returns -EFAULT if a program passes an invalid address to kernel. SG_IO path needs to pass the returned value to user space instead of ignoring it. Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 Justin Mattock 提交于
impact: Add missing definitions(letters). Signed-off-by: NJustin P. Mattock <justinmattock@gmail.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
* topic/memdup_user: ALSA: sound/pci: use memdup_user() ALSA: sound/usb: use memdup_user() ALSA: sound/isa: use memdup_user() ALSA: sound/core: use memdup_user()
-
由 Takashi Iwai 提交于
* topic/usb-caiaq: ALSA: snd-usb-caiaq: rename files to remove redundant information in file pathes ALSA: snd-usb-caiaq: clean up header includes
-
由 Takashi Iwai 提交于
* topic/asoc: ASoC: Disable S3C64xx support in Kconfig ASoC: magician: remove un-necessary #include of pxa-regs.h and hardware.h
-
由 Takashi Iwai 提交于
* topic/hda: ALSA: hda - Add quirk mask for Fujitsu Amilo laptops with ALC883 ALSA: hda - Avoid call of snd_jack_report at release ALSA: add private_data to struct snd_jack
-
由 Takashi Iwai 提交于
* topic/jack-free-fix: ALSA: hda - Avoid call of snd_jack_report at release ALSA: add private_data to struct snd_jack
-
git://git.alsa-project.org/alsa-kernel由 Takashi Iwai 提交于
* 'master' of git://git.alsa-project.org/alsa-kernel: [ALSA] intel8x0: add one retry to the ac97_clock measurement routine [ALSA] intel8x0: fix wrong conditions in ac97_clock measure routine [ALSA] intel8x0: do not use zero value from PICB register [ALSA] intel8x0: an attempt to make ac97_clock measurement more reliable [ALSA] pcm-midlevel: Add more strict buffer position checks based on jiffies [ALSA] hda_intel: fix unexpected ring buffer positions
-
由 Xu Gang 提交于
SPIN_LOCK_UNLOCKED is deprecated, use DEFINE_SPINLOCK instead. (as suggested in Documentation/spinlocks.txt) Signed-off-by: NXu Gang <xug@cn.fujitsu.com> Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Christoph Hellwig 提交于
Remove the weird pointer to file_operations mess and replace it with straight-forward defining of the lockinginstance names to the _nolock variants. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Steven Whitehouse 提交于
The rwsem, used only on umount, is in the wrong place in glock.c. This patch moves it up a bit so that it does not get called under a spinlock. Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-
由 Steven Whitehouse 提交于
In certain cases symlinks can appear to have zero size if a lookup on the inode occurs within a certain (very short) time after the symlink has been created. The symlink is correctly created on disk but appears to have zero size when stat()ed. This patch closes the race and prevents incorrect sizes appearing. Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com>
-