- 29 12月, 2009 40 次提交
-
-
由 Gertjan van Wingerde 提交于
Let each of them take a struct rt2x00_dev pointer as argument instead of a mixture of struct rt2x00_chip and struct rt2x00_dev pointers. Preparation for further clean ups in the rt2x00 chip handling, especially for rt2800 devices. Signed-off-by: NGertjan van Wingerde <gwingerde@gmail.com> Acked-by: NIvo van Doorn <IvDoorn@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Gertjan van Wingerde 提交于
There is no need for Kconfig symbols RT2800PCI_PCI and RT2800PCI_SOC to be tristates, as they are only used to check whether RT2800 PCI or SOC support is to be compiled in. Signed-off-by: NGertjan van Wingerde <gwingerde@gmail.com> Acked-by: NIvo van Doorn <IvDoorn@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Gertjan van Wingerde 提交于
rt2800lib currently checks whether RT2800USB is enabled in the configuration. Strictly speaking this is not necessary, it only needs to know whether the generic rt2x00usb library functions are available. Therefore check for RT2X00_LIB_USB instead. Signed-off-by: NGertjan van Wingerde <gwingerde@gmail.com> Acked-by: NIvo van Doorn <IvDoorn@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Gertjan van Wingerde 提交于
Fix checking for SOC support in rt2800pci. The wrong config (an unexisting one) was checked. Signed-off-by: NGertjan van Wingerde <gwingerde@gmail.com> Acked-by: NIvo van Doorn <IvDoorn@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 John W. Linville 提交于
This is no longer needed with the availability of CONFIG_CFG80211_INTERNAL_REGDB. Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Juuso Oikarinen 提交于
There is a minor bug in the code causing a "join" to be performed before there is an intention to associate. Fix this. Signed-off-by: NJuuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: NLuciano Coelho <luciano.coelho@nokia.com> Signed-off-by: NLuciano Coelho <luciano.coelho@nokia.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Juuso Oikarinen 提交于
Because the interface is started and the vif are created and destroyed separately, there is a slim possibility beacon-loss indications occur while there is no vif - causing a kernel-oops unless checked. Add checking for the vif. Signed-off-by: NJuuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: NLuciano Coelho <luciano.coelho@nokia.com> Signed-off-by: NLuciano Coelho <luciano.coelho@nokia.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Juuso Oikarinen 提交于
This acx configures host clock parameters in correspondence with the clock request line - the settling time of the clock, and whether fast wake-up is supported. Signed-off-by: NJuuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: NLuciano Coelho <luciano.coelho@nokia.com> Signed-off-by: NLuciano Coelho <luciano.coelho@nokia.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Juuso Oikarinen 提交于
For cleaner implementation, change the bunch of booleans in the struct wl1271 structure into a flags bitmask. Signed-off-by: NJuuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: NLuciano Coelho <luciano.coelho@nokia.com> Signed-off-by: NLuciano Coelho <luciano.coelho@nokia.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Juuso Oikarinen 提交于
Previously, only basic rates were used for data transmission - resulting in reduced transfer rates. This patch takes enables the firmware to take advantage of the full set of data rates supported by the AP. Signed-off-by: NJuuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: NLuciano Coelho <luciano.coelho@nokia.com> Signed-off-by: NLuciano Coelho <luciano.coelho@nokia.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Juuso Oikarinen 提交于
Previously a "firmware chooses" value was used for the rates of all control message templates set to the firmware. This resulted in a too high rate to be chosen to transmit those messages. Change this by configuring a fixed low rate for the templates. Signed-off-by: NJuuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: NLuciano Coelho <luciano.coelho@nokia.com> Signed-off-by: NLuciano Coelho <luciano.coelho@nokia.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Juuso Oikarinen 提交于
This patch adds rudimentary a-hoc support for the driver. It will allow setting up ad-hoc, and for other devices to scan and join. The beacon and probe response template setting is slightly dirty, and need to be properly implemented with support from mac80211. Also, the SSID is not configured to the firmware - the FW will not be able to respond to probe requests autonomously. Signed-off-by: NJuuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: NLuciano Coelho <luciano.coelho@nokia.com> Signed-off-by: NLuciano Coelho <luciano.coelho@nokia.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Juuso Oikarinen 提交于
Remove the beacon-loss indication to stack from PSM entry failure handling - this will cause more problems than it will solve due to the design of the mac80211. Signed-off-by: NJuuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: NLuciano Coelho <luciano.coelho@nokia.com> Signed-off-by: NLuciano Coelho <luciano.coelho@nokia.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Juuso Oikarinen 提交于
This patch adds a short delay before powering on the wl1271. Normally, it is not needed, but if the wl1271 has been powered off shortly before, for reliable firmware-booting this small stabilization delay is required. Signed-off-by: NJuuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: NLuciano Coelho <luciano.coelho@nokia.com> Signed-off-by: NLuciano Coelho <luciano.coelho@nokia.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Juuso Oikarinen 提交于
The wl1271 has a hardware bug which causes it to randomly (very infrequently) to fail powering up properly. This patch implements retry for the chipset boot sequence, to work around the hardware problem. Signed-off-by: NJuuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: NLuciano Coelho <luciano.coelho@nokia.com> Signed-off-by: NLuciano Coelho <luciano.coelho@nokia.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Juuso Oikarinen 提交于
The mac80211 sometimes requests power save entry while not associated - this will cause problems, so prevent it if not associated. Go to powersave once association is complete. Signed-off-by: NJuuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: NLuciano Coelho <luciano.coelho@nokia.com> Signed-off-by: NLuciano Coelho <luciano.coelho@nokia.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Juuso Oikarinen 提交于
In reference source, events are acknowledged separately - fix the driver to do the same. Signed-off-by: NJuuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: NLuciano Coelho <luciano.coelho@nokia.com> Signed-off-by: NLuciano Coelho <luciano.coelho@nokia.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Juuso Oikarinen 提交于
While not associated, default the data rates to 1 and 2mbps, so that only those rates will be used for association related message transfer. Once associated, configure the full rate-set supported by the AP. Signed-off-by: NJuuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: NLuciano Coelho <luciano.coelho@nokia.com> Signed-off-by: NLuciano Coelho <luciano.coelho@nokia.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Juuso Oikarinen 提交于
Remove the smart-reflex ACX - the associated parameters are now configured in the radio parameters config. Signed-off-by: NJuuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: NLuciano Coelho <luciano.coelho@nokia.com> Signed-off-by: NLuciano Coelho <luciano.coelho@nokia.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Juuso Oikarinen 提交于
Configure correct values to be used with the smart-reflex configuration of the firmware. Signed-off-by: NJuuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: NLuciano Coelho <luciano.coelho@nokia.com> Signed-off-by: NLuciano Coelho <luciano.coelho@nokia.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luciano Coelho 提交于
In the data path configuration, one of the parameters is the channel. We have been setting it to wl->channel, which is not correct in this case. This channel has nothing to do with the channel we're currently tuned to, since it is only used for calibration during this phase. Hardcoded the channel to 1, according to the reference driver. Signed-off-by: NLuciano Coelho <luciano.coelho@nokia.com> Reviewed-by: NJuuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luciano Coelho 提交于
In the new reference driver, some of the firmware configuration values have been changed. This patch changes them in the wl1271 driver accordingly. Signed-off-by: NLuciano Coelho <luciano.coelho@nokia.com> Reviewed-by: NJuuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luciano Coelho 提交于
We were uploading the whole NVS file, but that is wrong, because the same file also contains the initialization values. For the latest firmwares, we should upload only the initial 468 bytes from the file. Signed-off-by: NLuciano Coelho <luciano.coelho@nokia.com> Reviewed-by: NJuuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luciano Coelho 提交于
Some debugging tools require the chip to be powered on before they can work. With these tools, we shouldn't upload the firmware nor boot the firmware ourselves, so this debufs file is provided. It always contains the gpio power setting (0 = off, 1 = on). To change the power setting, just write 0 or 1 to the file. Signed-off-by: NLuciano Coelho <luciano.coelho@nokia.com> Reviewed-by: NJuuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: NKalle Valo <kalle.valo@nokia.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luciano Coelho 提交于
There was a typo in one of the values in the rx_rssi_and_proc_compens elemt of the Radio Parameters struct. Signed-off-by: NLuciano Coelho <luciano.coelho@nokia.com> Reviewed-by: NJuuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luciano Coelho 提交于
Newer firmwares require the dco itrim parameters to be set during initialization. This patch implements the new ACX function and calls it. Signed-off-by: NLuciano Coelho <luciano.coelho@nokia.com> Reviewed-by: NJuuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luciano Coelho 提交于
We were using CONF_TX_RATE_MASK_ALL when calling wl1271_acx_rate_policies() during init. We should use WL1271_DEFAULT_BASIC_RATE_SET instead. The values are the same, but the latter is just the correct macro to use. Signed-off-by: NLuciano Coelho <luciano.coelho@nokia.com> Reviewed-by: NJuuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luciano Coelho 提交于
The call to wl1271_cmd_build_null_data() was missing when we got associated, this was causing PS to fail. This patch adds the call and now PS seems to work. Signed-off-by: NLuciano Coelho <luciano.coelho@nokia.com> Reviewed-by: NJuuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luciano Coelho 提交于
We were not checking the return value from the call to wl1271_cmd_join(). Added a check to make things more reliable. Signed-off-by: NLuciano Coelho <luciano.coelho@nokia.com> Reviewed-by: NJuuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luciano Coelho 提交于
The wl1271 firmware supports maximun 25.5dBm, so the driver was returning -EINVALID to anything above that. This patch uses the channel max_power option to limit the TX power to 25dBm. Signed-off-by: NLuciano Coelho <luciano.coelho@nokia.com> Reviewed-by: NJuuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luciano Coelho 提交于
Now we're using a the idle information coming from mac80211 to decide when to disconnect. If we have joined (ie. we're listening to a channel), whenever the interface goes to idle, we will issue a disconnect command. So the workaround to send a disconnect command before joining is not needed anymore. Signed-off-by: NLuciano Coelho <luciano.coelho@nokia.com> Reviewed-by: NJuuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luciano Coelho 提交于
When we need to change the channel before association, we have to send a join command with a valid BSSID. With this patch we use 0baddeadbeef as the BSSID. There are ongoing discussions with TI to get this done in a cleaner way. When we go back to idle, we issue a CMD_DISCONNECT to make sure the firmware stops listening to the channel and cleans things up internally. Signed-off-by: NLuciano Coelho <luciano.coelho@nokia.com> Reviewed-by: NJuuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luciano Coelho 提交于
Add new radio parameters for new structures based on firmware revision 6.1.0.0.288. Signed-off-by: NLuciano Coelho <luciano.coelho@nokia.com> Reviewed-by: NJuuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luciano Coelho 提交于
There were some changes in the values we have to use for these settings. This patches updates them. Signed-off-by: NLuciano Coelho <luciano.coelho@nokia.com> Reviewed-by: NJuuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luciano Coelho 提交于
In revision 6.1.0.0.288 the general parameters structure has changed. This patch updates the driver code accordingly. Signed-off-by: NLuciano Coelho <luciano.coelho@nokia.com> Reviewed-by: NJuuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Luciano Coelho 提交于
In revision 6.1.0.0.288 the radio parameters structure has changed. This patch updates the driver code accordingly. Signed-off-by: NLuciano Coelho <luciano.coelho@nokia.com> Reviewed-by: NJuuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Larry Finger 提交于
If userencounter the "Fatal DMA Problem" with a BCM43XX device, and still wish to use b43 as the driver, their only option is to rebuild the kernel with CONFIG_B43_FORCE_PIO. This patch removes this option and allows PIO mode to be selected with a load-time parameter for the module. Note that the configuration variable CONFIG_B43_PIO is also removed. Once the DMA problem with the BCM4312 devices is solved, this patch will likely be reverted. Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net> Tested-by: NJohn Daiker <daikerjohn@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Lennert Buytenhek 提交于
Signed-off-by: NLennert Buytenhek <buytenh@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Lennert Buytenhek 提交于
Signed-off-by: NLennert Buytenhek <buytenh@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Lennert Buytenhek 提交于
The receive descriptor ops that are currently marked as being for 8687 only are actually used for all STA firmware images, whereas the receive descriptor ops marked as 8366 are only used on 8366 when an AP firmware image is in use. Rename the receive descriptor ops to reflect this, use the STA ops unconditionally if the firmware image loaded reported the STA ready code, and rename the mwl8k_device_info::rxd_ops member to ap_rxd_ops to indicate that it should only be used if we are running on AP firmware. Signed-off-by: NLennert Buytenhek <buytenh@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-