- 04 6月, 2015 3 次提交
-
-
由 Ville Syrjälä 提交于
commit 65ca7514 Author: Damien Lespiau <damien.lespiau@intel.com> Date: Mon Feb 9 19:33:22 2015 +0000 drm/i915/skl: Implement WaBarrierPerformanceFixDisable got misapplied and the code landed in chv_init_workarounds() instead of the intended skl_init_workarounds(). Move it over to the right place. Cc: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: NDamien Lespiau <damien.lespiau@intel.com> Reviewed-by: NBen Widawsky <ben@bwidawsk.net> Signed-off-by: NJani Nikula <jani.nikula@intel.com>
-
Add all missing platforms handled by intel_set_memory_cxsr() to the i915_sr_status debugfs entry. v2: Add G4X too. (Ville) Clarify the change also affects CHV. (Ander) References: https://bugs.freedesktop.org/show_bug.cgi?id=89792Signed-off-by: NAnder Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: NJani Nikula <jani.nikula@intel.com>
-
由 Arun Siluvery 提交于
After GPU reset, HW is losing the address of HWS page in the register. The page itself is valid except that HW is not aware of its location. [ 64.368623] [drm:gen8_init_common_ring [i915]] *ERROR* HWS Page address = 0x00000000 [ 64.368655] [drm:gen8_init_common_ring [i915]] *ERROR* HWS Page address = 0x00000000 [ 64.368681] [drm:gen8_init_common_ring [i915]] *ERROR* HWS Page address = 0x00000000 [ 64.368704] [drm:gen8_init_common_ring [i915]] *ERROR* HWS Page address = 0x00000000 This patch reloads this value into the register during ring init. Signed-off-by: NArun Siluvery <arun.siluvery@linux.intel.com> Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: NJani Nikula <jani.nikula@intel.com>
-
- 01 6月, 2015 9 次提交
-
-
由 Ville Syrjälä 提交于
Apparently we can have requests even if though the active list is empty, so do the request retirement regardless of whether there's anything on the active list. The way it happened here is that during suspend intel_ring_idle() notices the olr hanging around and then proceeds to get rid of it by adding a request. However since there was nothing on the active lists i915_gem_retire_requests() didn't clean those up, and so the idle work never runs, and we leave the GPU "busy" during suspend resulting in a WARN later. Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk> Cc: stable@vger.kernel.org Signed-off-by: NJani Nikula <jani.nikula@intel.com>
-
由 Jim Bride 提交于
According to the HSW b-spec we need to try clock divisors of 63 and 72, each 3 or more times, when attempting DP AUX channel communication on a server chipset. This actually wasn't happening due to a short-circuit that only checked the DP_AUX_CH_CTL_DONE bit in status rather than checking that the operation was done and that DP_AUX_CH_CTL_TIME_OUT_ERROR was not set. [v2] Implemented alternate solution suggested by Jani Nikula. Cc: stable@vger.kernel.org Signed-off-by: NJim Bride <jim.bride@linux.intel.com> Signed-off-by: NJani Nikula <jani.nikula@intel.com>
-
由 Linus Torvalds 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs由 Linus Torvalds 提交于
Pull vfs fix from Al Viro: "Off-by-one in d_walk()/__dentry_kill() race fix. It's very hard to hit; possible in the same conditions as the original bug, except that you need the skipped branch to contain all the remaining evictables, so that the d_walk()-calling loop in d_invalidate() decides there's nothing more to do and doesn't go for another pass - otherwise that next pass will sweep the sucker. So it's not too urgent, but seeing that the fix is obvious and the original commit has spread into all -stable branches..." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: d_walk() might skip too much
-
git://ftp.arm.linux.org.uk/~rmk/linux-arm由 Linus Torvalds 提交于
Pull ARM fixes from Russell King: "Three fixes this time around: - fix a memory leak which occurs when probing performance monitoring unit interrupts - fix handling of non-PMD aligned end of RAM causing boot failures - fix missing syscall trace exit path with syscall tracing enabled causing a kernel oops in the audit code" * 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: ARM: 8357/1: perf: fix memory leak when probing PMU PPIs ARM: fix missing syscall trace exit ARM: 8356/1: mm: handle non-pmd-aligned end of RAM
-
git://git.kernel.org/pub/scm/linux/kernel/git/ralf/linux由 Linus Torvalds 提交于
Pull MIPS fixes from Ralf Baechle: "MIPS fixes for 4.1 all across the tree" * 'upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/ralf/linux: MIPS: strnlen_user.S: Fix a CPU_DADDI_WORKAROUNDS regression MIPS: BMIPS: Fix bmips_wr_vec() MIPS: ath79: fix build problem if CONFIG_BLK_DEV_INITRD is not set MIPS: Fuloong 2E: Replace CONFIG_USB_ISP1760_HCD by CONFIG_USB_ISP1760 MIPS: irq: Use DECLARE_BITMAP ttyFDC: Fix to use native endian MMIO reads MIPS: Fix CDMM to use native endian MMIO reads
-
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux由 Linus Torvalds 提交于
Pull turbostat tool fixes from Len Brown: "Just one minor kernel dependency in this batch -- added a #define to msr-index.h" * 'turbostat' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: tools/power turbostat: update version number to 4.7 tools/power turbostat: allow running without cpu0 tools/power turbostat: correctly decode of ENERGY_PERFORMANCE_BIAS tools/power turbostat: enable turbostat to support Knights Landing (KNL) tools/power turbostat: correctly display more than 2 threads/core
-
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending由 Linus Torvalds 提交于
Pull SCSI target fixes from Nicholas Bellinger: "These are mostly minor fixes, with the exception of the following that address fall-out from recent v4.1-rc1 changes: - regression fix related to the big fabric API registration changes and configfs_depend_item() usage, that required cherry-picking one of HCH's patches from for-next to address the issue for v4.1 code. - remaining TCM-USER -v2 related changes to enforce full CDB passthrough from Andy + Ilias. Also included is a target_core_pscsi driver fix from Andy that addresses a long standing issue with a Scsi_Host reference being leaked on PSCSI device shutdown" * git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: iser-target: Fix error path in isert_create_pi_ctx() target: Use a PASSTHROUGH flag instead of transport_types target: Move passthrough CDB parsing into a common function target/user: Only support full command pass-through target/user: Update example code for new ABI requirements target/pscsi: Don't leak scsi_host if hba is VIRTUAL_HOST target: Fix se_tpg_tfo->tf_subsys regression + remove tf_subsystem target: Drop signal_pending checks after interruptible lock acquire target: Add missing parentheses target: Fix bidi command handling target/user: Disallow full passthrough (pass_level=0) ISCSI: fix minor memory leak
-
由 Linus Torvalds 提交于
Merge tag 'hwmon-for-linus-v4.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fixes from Guenter Roeck: "Some late hwmon patches, all headed for -stable - fix sysfs attribute initialization in nct6775 and nct6683 drivers - do not attempt to auto-detect tmp435 on I2C address 0x37 - ensure iio channel is of type IIO_VOLTAGE in ntc_thermistor driver" * tag 'hwmon-for-linus-v4.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (nct6683) Add missing sysfs attribute initialization hwmon: (nct6775) Add missing sysfs attribute initialization hwmon: (tmp401) Do not auto-detect chip on I2C address 0x37 hwmon: (ntc_thermistor) Ensure iio channel is of type IIO_VOLTAGE
-
- 31 5月, 2015 7 次提交
-
-
由 Roland Dreier 提交于
We don't assign pi_ctx to desc->pi_ctx until we're certain to succeed in the function. That means the cleanup path should use the local pi_ctx variable, not desc->pi_ctx. This was detected by Coverity (CID 1260062). Signed-off-by: NRoland Dreier <roland@purestorage.com> Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>
-
由 Andy Grover 提交于
It seems like we only care if a transport is passthrough or not. Convert transport_type to a flags field and replace TRANSPORT_PLUGIN_* with a flag, TRANSPORT_FLAG_PASSTHROUGH. Signed-off-by: NAndy Grover <agrover@redhat.com> Reviewed-by: NIlias Tsitsimpis <iliastsi@arrikto.com> Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>
-
由 Andy Grover 提交于
Aside from whether they handle BIDI ops or not, parsing of the CDB by kernel and user SCSI passthrough modules should be identical. Move this into a new passthrough_parse_cdb() and call it from tcm-pscsi and tcm-user. Reported-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NIlias Tsitsimpis <iliastsi@arrikto.com> Signed-off-by: NAndy Grover <agrover@redhat.com> Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>
-
由 Andy Grover 提交于
After much discussion, give up on only passing a subset of SCSI commands to userspace and pass them all. Based on what pscsi is doing, make sure to set SCF_SCSI_DATA_CDB for I/O ops, and define attributes identical to pscsi. Make hw_block_size configurable via dev param. Remove mention of command filtering from tcmu-design.txt. Signed-off-by: NAndy Grover <agrover@redhat.com> Reviewed-by: NIlias Tsitsimpis <iliastsi@arrikto.com> Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>
-
由 Andy Grover 提交于
We now require that the userspace handler set a bit if the command is not handled. Update calls to tcmu_hdr_get_op for v2. Signed-off-by: NAndy Grover <agrover@redhat.com> Reviewed-by: NIlias Tsitsimpis <iliastsi@arrikto.com> Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>
-
由 Andy Grover 提交于
See https://bugzilla.redhat.com/show_bug.cgi?id=1025672 We need to put() the reference to the scsi host that we got in pscsi_configure_device(). In VIRTUAL_HOST mode it is associated with the dev_virt, not the hba_virt. Signed-off-by: NAndy Grover <agrover@redhat.com> Cc: stable@vger.kernel.org # 2.6.38+ Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>
-
由 Christoph Hellwig 提交于
There is just one configfs subsystem in the target code, so we might as well add two helpers to reference / unreference it from the core code instead of passing pointers to it around. This fixes a regression introduced for v4.1-rc1 with commit 9ac8928e, where configfs_depend_item() callers using se_tpg_tfo->tf_subsys would fail, because the assignment from the original target_core_subsystem[] is no longer happening at target_register_template() time. (Fix target_core_exit_configfs pointer dereference - Sagi) Signed-off-by: NChristoph Hellwig <hch@lst.de> Reported-by: NHimanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>
-
- 30 5月, 2015 17 次提交
-
-
由 Guenter Roeck 提交于
The following error message is seen when loading the nct6683 driver with DEBUG_LOCK_ALLOC enabled. BUG: key ffff88040b2f0030 not in .data! ------------[ cut here ]------------ WARNING: CPU: 0 PID: 186 at kernel/locking/lockdep.c:2988 lockdep_init_map+0x469/0x630() DEBUG_LOCKS_WARN_ON(1) Caused by a missing call to sysfs_attr_init() when initializing sysfs attributes. Reported-by: NAlexey Orishko <alexey.orishko@gmail.com> Reviewed-by: NJean Delvare <jdelvare@suse.de> Cc: stable@vger.kernel.org # v3.18+ Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
-
由 Guenter Roeck 提交于
The following error message is seen when loading the nct6775 driver with DEBUG_LOCK_ALLOC enabled. BUG: key ffff88040b2f0030 not in .data! ------------[ cut here ]------------ WARNING: CPU: 0 PID: 186 at kernel/locking/lockdep.c:2988 lockdep_init_map+0x469/0x630() DEBUG_LOCKS_WARN_ON(1) Caused by a missing call to sysfs_attr_init() when initializing sysfs attributes. Reported-by: NAlexey Orishko <alexey.orishko@gmail.com> Reviewed-by: NJean Delvare <jdelvare@suse.de> Cc: stable@vger.kernel.org # v3.12+ Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm由 Linus Torvalds 提交于
Pull PCI / ACPI fix from Rafael Wysocki: "This fixes a bug uncovered by a recent driver core change that modified the implementation of the ACPI_COMPANION_SET() macro to strictly rely on its second argument to be either NULL or a valid pointer to struct acpi_device. As it turns out, pcibios_root_bridge_prepare() on x86 and ia64 works with the assumption that the only code path calling pci_create_root_bus() is pci_acpi_scan_root() and therefore the sysdata argument passed to it will always match the expectations of pcibios_root_bridge_prepare(). That need not be the case, however, and in particular it is not the case for the Xen pcifront driver that passes a pointer to its own private data strcture as sysdata to pci_scan_bus_parented() which then passes it to pci_create_root_bus() and it ends up being used incorrectly by pcibios_root_bridge_prepare()" * tag 'acpi-pci-4.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: PCI / ACPI: Do not set ACPI companions for host bridges with parents
-
git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs由 Linus Torvalds 提交于
Pull xfs fixes from Dave Chinner: "This is a little larger than I'd like late in the release cycle, but all the fixes are for regressions introduced in the 4.1-rc1 merge, or are needed back in -stable kernels fairly quickly as they are filesystem corruption or userspace visible correctness issues. Changes in this update: - regression fix for new rename whiteout code - regression fixes for new superblock generic per-cpu counter code - fix for incorrect error return sign introduced in 3.17 - metadata corruption fixes that need to go back to -stable kernels" * tag 'xfs-for-linus-4.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs: xfs: fix broken i_nlink accounting for whiteout tmpfile inode xfs: xfs_iozero can return positive errno xfs: xfs_attr_inactive leaves inconsistent attr fork state behind xfs: extent size hints can round up extents past MAXEXTLEN xfs: inode and free block counters need to use __percpu_counter_compare percpu_counter: batch size aware __percpu_counter_compare() xfs: use percpu_counter_read_positive for mp->m_icount
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc由 Linus Torvalds 提交于
Pull ARM SoC fixes from Arnd Bergmann: "Two weeks worth of small bug fixes this time, nothing sticking out this time: - one defconfig change to adapt to a modified Kconfig symbol - two fixes for i.MX for backwards compatibility with older DT files that was accidentally broken - one regression fix for irq handling on pxa - three small dt files on omap, and one each for imx and exynos" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: multi_v7_defconfig: Replace CONFIG_USB_ISP1760_HCD by CONFIG_USB_ISP1760 ARM: imx6: gpc: don't register power domain if DT data is missing ARM: imx6: allow booting with old DT ARM: dts: set display clock correctly for exynos4412-trats2 ARM: pxa: pxa_cplds: signedness bug in probe ARM: dts: Fix WLAN interrupt line for AM335x EVM-SK ARM: dts: omap3-devkit8000: Fix NAND DT node ARM: dts: am335x-boneblack: disable RTC-only sleep ARM: dts: fix imx27 dtb build rule ARM: dts: imx27: only map 4 Kbyte for fec registers
-
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm由 Linus Torvalds 提交于
Pull device-mapper fixes from Mike Snitzer: "Quite a few fixes for DM's blk-mq support thanks to extra DM multipath testing from Junichi Nomura and Bart Van Assche. Also fix a casting bug in dm_merge_bvec() that could cause only a single page to be added to a bio (Joe identified this while testing dm-cache writeback)" * tag 'dm-4.1-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm: fix casting bug in dm_merge_bvec() dm: fix reload failure of 0 path multipath mapping on blk-mq devices dm: fix false warning in free_rq_clone() for unmapped requests dm: requeue from blk-mq dm_mq_queue_rq() using BLK_MQ_RQ_QUEUE_BUSY dm mpath: fix leak of dm_mpath_io structure in blk-mq .queue_rq error path dm: fix NULL pointer when clone_and_map_rq returns !DM_MAPIO_REMAPPED dm: run queue on re-queue
-
由 Guenter Roeck 提交于
I2C address 0x37 may be used by EEPROMs, which can result in false positives. Do not attempt to detect a chip at this address. Reviewed-by: NJean Delvare <jdelvare@suse.de> Cc: stable@vger.kernel.org # v4.0+ Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
-
由 Linus Torvalds 提交于
Merge misc fixes from Andrew Morton: "10 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: scripts/gdb: fix lx-lsmod refcnt omfs: fix potential integer overflow in allocator omfs: fix sign confusion for bitmap loop counter omfs: set error return when d_make_root() fails fs, omfs: add NULL terminator in the end up the token list MAINTAINERS: update CAPABILITIES pattern fs/binfmt_elf.c:load_elf_binary(): return -EINVAL on zero-length mappings tracing/mm: don't trace mm_page_pcpu_drain on offline cpus tracing/mm: don't trace mm_page_free on offline cpus tracing/mm: don't trace kmem_cache_free on offline cpus
-
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux由 Linus Torvalds 提交于
Pull fixes for cpumask and modules from Rusty Russell: "** NOW WITH TESTING! ** Two fixes which got lost in my recent distraction. One is a weird cpumask function which needed to be rewritten, the other is a module bug which is cc:stable" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: cpumask_set_cpu_local_first => cpumask_local_spread, lament module: Call module notifier on failure after complete_formation()
-
由 Maciej W. Rozycki 提交于
Correct a regression introduced with 8453eebd [MIPS: Fix strnlen_user() return value in case of overlong strings.] causing assembler warnings and broken code generated in __strnlen_kernel_nocheck_asm: arch/mips/lib/strnlen_user.S: Assembler messages: arch/mips/lib/strnlen_user.S:64: Warning: Macro instruction expanded into multiple instructions in a branch delay slot with the CPU_DADDI_WORKAROUNDS option set, resulting in the function looping indefinitely upon mounting NFS root. Use conditional assembly to avoid a microMIPS code size regression. Using $at unconditionally would cause such a regression as there are no 16-bit instruction encodings available for ALU operations using this register. Using $v1 unconditionally would produce short microMIPS encodings, but would prevent this register from being used across calls to this function. The extra LI operation introduced is free, replacing a NOP originally scheduled into the delay slot of the branch that follows. Signed-off-by: NMaciej W. Rozycki <macro@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/10205/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Petri Gynther 提交于
bmips_wr_vec() copies exception vector code from start to dst. The call to dma_cache_wback() needs to flush (end-start) bytes, starting at dst, from write-back cache to memory. Signed-off-by: NPetri Gynther <pgynther@google.com> Acked-by: NFlorian Fainelli <f.fainelli@gmail.com> Reviewed-by: NKevin Cernekee <cernekee@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/10193/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Laurent Fasnacht 提交于
initrd_start is defined in init/do_mounts_initrd.c, which is only included in kernel if CONFIG_BLK_DEV_INITRD=y. Signed-off-by: NLaurent Fasnacht <l@libres.ch> Cc: linux-mips@linux-mips.org Cc: trivial@kernel.org Patchwork: https://patchwork.linux-mips.org/patch/10198/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
git://people.freedesktop.org/~airlied/linux由 Linus Torvalds 提交于
Pull drm fixes from Dave Airlie: "This is made up 4 groups of fixes detailed below. vgem: Due to some misgivings about possible bad use cases this allow, backout a chunk of the interface to stop those use cases for now. radeon: Fix for an oops regression in the audio code, and a partial revert for a fix that was cauing problems. nouveau: regression fix for Fermi, and display-less Maxwell boot fixes. drm core: a fix for i915 cursor vblank waiting in the atomic helpers" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/nouveau/gr/gm204: remove a stray printk drm/nouveau/devinit/gm100-: force devinit table execution on boards without PDISP drm/nouveau/devinit/gf100: make the force-post condition more obvious drm/nouveau/gr/gf100-: fix wrong constant definition drm/radeon: partially revert "fix VM_CONTEXT*_PAGE_TABLE_END_ADDR handling" drm/radeon/audio: make sure connector is valid in hotplug case Revert "drm/radeon: only mark audio as connected if the monitor supports it (v3)" drm/radeon: don't share plls if monitors differ in audio support drm/vgem: drop DRIVER_PRIME (v2) drm/plane-helper: Adapt cursor hack to transitional helpers
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound由 Linus Torvalds 提交于
Pull sound fixes from Takashi Iwai: "No big surprise here, just a bunch of small fixes for HD-audio and USB-audio: - partial revert of widget power-saving for IDT codecs - revert mute-LED enum ctl for Thinkpads due to confusion - a quirk for a new Radeon HDMI controller - Realtek codec name fix for Dell - a workaround for headphone mic boost on some laptops - stream_pm ops setup (and its fix for regression) - another quirk for MS LifeCam USB-audio" * tag 'sound-4.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda - Fix lost sound due to stream_pm ops cleanup ALSA: hda - Disable Headphone Mic boost for ALC662 ALSA: hda - Disable power_save_node for IDT92HD71bxx ALSA: hda - Fix noise on AMD radeon 290x controller ALSA: hda - Set stream_pm ops automatically by generic parser ALSA: hda/realtek - Add ALC256 alias name for Dell Revert "ALSA: hda - Add mute-LED mode control to Thinkpad" ALSA: usb-audio: Add quirk for MS LifeCam HD-3000
-
由 Joe Thornber 提交于
dm_merge_bvec() was originally added in f6fccb ("dm: introduce merge_bvec_fn"). In that commit a value in sectors is converted to bytes using << 9, and then assigned to an int. This code made assumptions about the value of BIO_MAX_SECTORS. A later commit 148e51 ("dm: improve documentation and code clarity in dm_merge_bvec") was meant to have no functional change but it removed the use of BIO_MAX_SECTORS in favor of using queue_max_sectors(). At this point the cast from sector_t to int resulted in a zero value. The fallout being dm_merge_bvec() would only allow a single page to be added to a bio. This interim fix is minimal for the benefit of stable@ because the more comprehensive cleanup of passing a sector_t to all DM targets' merge function will impact quite a few DM targets. Signed-off-by: NJoe Thornber <ejt@redhat.com> Signed-off-by: NMike Snitzer <snitzer@redhat.com> Cc: stable@vger.kernel.org # 3.19+
-
由 Junichi Nomura 提交于
dm-multipath accepts 0 path mapping. # echo '0 2097152 multipath 0 0 0 0' | dmsetup create newdev Such a mapping can be used to release underlying devices while still holding requests in its queue until working paths come back. However, once the multipath device is created over blk-mq devices, it rejects reloading of 0 path mapping: # echo '0 2097152 multipath 0 0 1 1 queue-length 0 1 1 /dev/sda 1' \ | dmsetup create mpath1 # echo '0 2097152 multipath 0 0 0 0' | dmsetup load mpath1 device-mapper: reload ioctl on mpath1 failed: Invalid argument Command failed With following kernel message: device-mapper: ioctl: can't change device type after initial table load. DM tries to inherit the current table type using dm_table_set_type() but it doesn't work as expected because of unnecessary check about whether the target type is hybrid or not. Hybrid type is for targets that work as either request-based or bio-based and not required for blk-mq or non blk-mq checking. Fixes: 65803c20 ("dm table: train hybrid target type detection to select blk-mq if appropriate") Signed-off-by: NJun'ichi Nomura <j-nomura@ce.jp.nec.com> Signed-off-by: NMike Snitzer <snitzer@redhat.com>
-
git://neil.brown.name/md由 Linus Torvalds 提交于
Pull m,ore md bugfixes gfrom Neil Brown: "Assorted fixes for new RAID5 stripe-batching functionality. Unfortunately this functionality was merged a little prematurely. The necessary testing and code review is now complete (or as complete as it can be) and to code passes a variety of tests and looks quite sensible. Also a fix for some recent locking changes - a race was introduced which causes a reshape request to sometimes fail. No data safety issues" * tag 'md/4.1-rc5-fixes' of git://neil.brown.name/md: md: fix race when unfreezing sync_action md/raid5: break stripe-batches when the array has failed. md/raid5: call break_stripe_batch_list from handle_stripe_clean_event md/raid5: be more selective about distributing flags across batch. md/raid5: add handle_flags arg to break_stripe_batch_list. md/raid5: duplicate some more handle_stripe_clean_event code in break_stripe_batch_list md/raid5: remove condition test from check_break_stripe_batch_list. md/raid5: Ensure a batch member is not handled prematurely. md/raid5: close race between STRIPE_BIT_DELAY and batching. md/raid5: ensure whole batch is delayed for all required bitmap updates.
-
- 29 5月, 2015 4 次提交
-
-
由 Mike Snitzer 提交于
When stacking request-based dm device on non blk-mq device and device-mapper target could not map the request (error target is used, multipath target with all paths down, etc), the WARN_ON_ONCE() in free_rq_clone() will trigger when it shouldn't. The warning was added by commit aa6df8dd ("dm: fix free_rq_clone() NULL pointer when requeueing unmapped request"). But free_rq_clone() with clone->q == NULL is valid usage for the case where dm_kill_unmapped_request() initiates request cleanup. Fix this false warning by just removing the WARN_ON -- it only generated false positives and was never useful in catching the intended case (completing clone request not being mapped e.g. clone->q being NULL). Fixes: aa6df8dd ("dm: fix free_rq_clone() NULL pointer when requeueing unmapped request") Reported-by: NBart Van Assche <bart.vanassche@sandisk.com> Reported-by: NJun'ichi Nomura <j-nomura@ce.jp.nec.com> Signed-off-by: NMike Snitzer <snitzer@redhat.com>
-
由 Geert Uytterhoeven 提交于
Since commit 100832ab ("usb: isp1760: Make HCD support optional"), CONFIG_USB_ISP1760_HCD is automatically selected when needed. Enabling that option in the defconfig is now a no-op, and no longer enables ISP1760 HCD support. Re-enable the ISP1760 driver in the defconfig by enabling USB_ISP1760_HOST_ROLE instead. Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: NArnd Bergmann <arnd@arndb.de>
-
由 Arnd Bergmann 提交于
Merge tag 'imx-fixes-4.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into fixes Merge "The i.MX fixes for 4.1, 3rd round" from Shawn Guo: It includes a couple of fixes for i.MX6 GPC code to let the new kernel be able to boot with old DTBs: - Booting v4.1-rc kernel with old DTBs will fail with a fat warning (require low-level debug to be seen), due to the adoption of stacked IRQ domain. The first fix improves the situation by allowing kernel boot up with old DTBs, although suspend/resume still breaks. - Booting new kernel with old DTBs that do not have power-domain info will result in a hang. The second patch fixes the hang by skipping the kernel power-domain registration if DTB has no power-domain info. * tag 'imx-fixes-4.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: imx6: gpc: don't register power domain if DT data is missing ARM: imx6: allow booting with old DT
-
由 Arnd Bergmann 提交于
Merge tag 'samsung-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into fixes Merge "Samsung fix for v4.1" from Kukjin Kim: - Set display clock correctly for exynos4412-trats2 : fix the following error exynos-drm: No connectors reported connected with modes [drm] Cannot find any crtc or sizes - going 1024x768 * tag 'samsung-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: dts: set display clock correctly for exynos4412-trats2
-