- 25 9月, 2008 40 次提交
-
-
由 Chris Mason 提交于
Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Yan Zheng 提交于
Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Chris Mason 提交于
rename and link don't always have a lock on the source inode, and our use of a per-inode index variable was racy. This changes things to store the index in a local variable instead. Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Chris Mason 提交于
Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Chris Mason 提交于
Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Chris Mason 提交于
Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Chris Mason 提交于
Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Chris Mason 提交于
Large streaming reads make for large bios, which means each entry on the list async work queues represents a large amount of data. IO congestion throttling on the device was kicking in before the async worker threads decided a single thread was busy and needed some help. The end result was that a streaming read would result in a single CPU running at 100% instead of balancing the work off to other CPUs. This patch also changes the pre-IO checksum lookup done by reads to work on a per-bio basis instead of a per-page. This results in many extra btree lookups on large streaming reads. Doing the checksum lookup right before bio submit allows us to reuse searches while processing adjacent offsets. Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Sven Wegener 提交于
Add a couple of #if's to follow API changes. Signed-off-by: NSven Wegener <sven.wegener@stealer.net> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Yan 提交于
The memory reclaiming issue happens when snapshot exists. In that case, some cache entries may not be used during old snapshot dropping, so they will remain in the cache until umount. The patch adds a field to struct btrfs_leaf_ref to record create time. Besides, the patch makes all dead roots of a given snapshot linked together in order of create time. After a old snapshot was completely dropped, we check the dead root list and remove all cache entries created before the oldest dead root in the list. Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Yan Zheng 提交于
To check whether a given file extent is referenced by multiple snapshots, the checker walks down the fs tree through dead root and checks all tree blocks in the path. We can easily detect whether a given tree block is directly referenced by other snapshot. We can also detect any indirect reference from other snapshot by checking reference's generation. The checker can always detect multiple references, but can't reliably detect cases of single reference. So btrfs may do file data cow even there is only one reference. Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Chris Mason 提交于
A large reference cache is directly related to a lot of work pending for the cleaner thread. This throttles back new operations based on the size of the reference cache so the cleaner thread will be able to keep up. Overall, this actually makes the FS faster because the cleaner thread will be more likely to find things in cache. Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Chris Mason 提交于
This changes the reference cache to make a single cache per root instead of one cache per transaction, and to key by the byte number of the disk block instead of the keys inside. This makes it much less likely to have cache misses if a snapshot or something has an extra reference on a higher node or a leaf while the first transaction that added the leaf into the cache is dropping. Some throttling is added to functions that free blocks heavily so they wait for old transactions to drop. Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Yan 提交于
Inode ref item can be in the next leaf when we find "path->slots[0] == btrfs_header_nritems(...)". Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Balaji Rao 提交于
Remove a unused variable 'path' in fixup_tree_root_location. Signed-off-by: NBalaji Rao <balajirrao@gmail.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Josef Bacik 提交于
Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Josef Bacik 提交于
Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Josef Bacik 提交于
Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Chris Mason 提交于
Checksum items are not inserted into the tree until all of the io from a given extent is complete. This means one dirty page from an extent may be written, freed, and then read again before the entire extent is on disk and the checksum item is inserted. The checksums themselves are stored in the ordered extent so they can be inserted in bulk when IO is complete. On read, if a checksum item isn't found, the ordered extents were being searched for a checksum record. This all worked most of the time, but the checksum insertion code tries to reduce the number of tree operations by pre-inserting checksum items based on i_size and a few other factors. This means the read code might find a checksum item that hasn't yet really been filled in. This commit changes things to check the ordered extents first and only dive into the btree if nothing was found. This removes the need for extra locking and is more reliable. Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Chris Mason 提交于
Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Chris Mason 提交于
Stress testing was showing data checksum errors, most of which were caused by a lookup bug in the extent_map tree. The tree was caching the last pointer returned, and searches would check the last pointer first. But, search callers also expect the search to return the very first matching extent in the range, which wasn't always true with the last pointer usage. For now, the code to cache the last return value is just removed. It is easy to fix, but I think lookups are rare enough that it isn't required anymore. This commit also replaces do_sync_mapping_range with a local copy of the related functions. Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Chris Mason 提交于
Before, extent buffers were a temporary object, meant to map a number of pages at once and collect operations on them. But, a few extra fields have crept in, and they are also the best place to store a per-tree block lock field as well. This commit puts the extent buffers into an rbtree, and ensures a single extent buffer for each tree block. Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Chris Mason 提交于
* In btrfs_delete_inode, wait for ordered extents after calling truncate_inode_pages. This is much faster, and more correct * Properly clear our the PageChecked bit everywhere we redirty the page. * Change the writepage fixup handler to lock the page range and check to see if an ordered extent had been inserted since the improperly dirtied page was discovered * Wait for ordered extents outside the transaction. This isn't required for locking rules but does improve transaction latencies * Reduce contention on the alloc_mutex by dropping it while incrementing refs on a node/leaf and while dropping refs on a leaf. Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Chris Mason 提交于
Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Chris Mason 提交于
It was possible for stale mappings from disk to be used instead of the new pending ordered extent. This adds a flag to the extent map struct to keep it pinned until the pending ordered extent is actually on disk. Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Chris Mason 提交于
Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Chris Mason 提交于
Data checksumming is done right before the bio is sent down the IO stack, which means a single bio might span more than one ordered extent. In this case, the checksumming data is split between two ordered extents. Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Chris Mason 提交于
Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Chris Mason 提交于
btrfs_drop_extents is always called with a range lock held on the inode. But, it may operate on extents outside that range as it drops and splits them. This patch adds a per-inode mutex that is held while calling btrfs_drop_extents and while inserting new extents into the tree. It prevents races from two procs working against adjacent ranges in the tree. Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Chris Mason 提交于
Checksum items are not inserted until the entire ordered extent is on disk, but individual pages might be clean and available for reclaim long before the whole extent is on disk. In order to allow those pages to be freed, we need to be able to search the list of ordered extents to find the checksum that is going to be inserted in the tree. This way if the page needs to be read back in before the checksums are in the btree, we'll be able to verify the checksum on the page. This commit adds the ability to search the pending ordered extents for a given offset in the file, and changes btrfs_releasepage to allow ordered pages to be freed. Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Chris Mason 提交于
btrfs_commit_transaction has to loop waiting for any writers in the transaction to finish before it can proceed. btrfs_start_transaction should be polite and not join a transaction that is in the process of being finished off. There are a few places that can't wait, basically the ones doing IO that might be needed to finish the transaction. For them, btrfs_join_transaction is added. Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Chris Mason 提交于
This changes the ordered data code to update i_size after the extent is on disk. An on disk i_size is maintained in the in-memory btrfs inode structures, and this is updated as extents finish. Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Chris Mason 提交于
Higher layers sometimes call set_page_dirty without asking the filesystem to help. This causes many problems for the data=ordered and cow code. This commit detects pages that haven't been properly setup for IO and kicks off an async helper to deal with them. Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Chris Mason 提交于
The old data=ordered code would force commit to wait until all the data extents from the transaction were fully on disk. This introduced large latencies into the commit and stalled new writers in the transaction for a long time. The new code changes the way data allocations and extents work: * When delayed allocation is filled, data extents are reserved, and the extent bit EXTENT_ORDERED is set on the entire range of the extent. A struct btrfs_ordered_extent is allocated an inserted into a per-inode rbtree to track the pending extents. * As each page is written EXTENT_ORDERED is cleared on the bytes corresponding to that page. * When all of the bytes corresponding to a single struct btrfs_ordered_extent are written, The previously reserved extent is inserted into the FS btree and into the extent allocation trees. The checksums for the file data are also updated. Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Chris Mason 提交于
Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Chris Mason 提交于
The existing throttle mechanism was often not sufficient to prevent new writers from coming in and making a given transaction run forever. This adds an explicit wait at the end of most operations so they will allow the current transaction to close. There is no wait inside file_write, inode updates, or cow filling, all which have different deadlock possibilities. This is a temporary measure until better asynchronous commit support is added. This code leads to stalls as it waits for data=ordered writeback, and it really needs to be fixed. Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Chris Mason 提交于
This allows us to delete an unlinked inode with dirty pages from the list instead of forcing commit to write these out before deleting the inode. Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Chris Mason 提交于
Extent alloctions are still protected by a large alloc_mutex. Objectid allocations are covered by a objectid mutex Other btree operations are protected by a lock on individual btree nodes Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Chris Mason 提交于
The allocation trees and the chunk trees are serialized via their own dedicated mutexes. This means allocation location is still not very fine grained. The main FS btree is protected by locks on each block in the btree. Locks are taken top / down, and as processing finishes on a given level of the tree, the lock is released after locking the lower level. The end result of a search is now a path where only the lowest level is locked. Releasing or freeing the path drops any locks held. Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Christoph Hellwig 提交于
Split the ioctl handling out of inode.c into a file of it's own. Also fix up checkpatch.pl warnings for the moved code. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-