- 12 12月, 2009 8 次提交
-
-
由 David Vrabel 提交于
The WHCI HCD will also support urbs with scatter-gather lists. Add a usb_bus field to indicated how many sg list elements are supported by the HCD. Use this to decide whether to pass the scatter-list to the HCD or not. Make the usb-storage driver use this new field. Signed-off-by: NDavid Vrabel <david.vrabel@csr.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: Matthew Dharm <mdharm-usb@one-eyed-alien.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Jean Delvare 提交于
I can't see any reason why these would not be static. Signed-off-by: NJean Delvare <khali@linux-fr.org> Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Julie Zhu 提交于
Add bus glue driver for Xilinx USB host controller. The controller can be configured as HS only or HS/FS hybrid. The driver uses the device tree file to configure the driver according to the setting in the hardware system. This driver has been tested with usbtest using the NET2280 PCI card. Signed-off-by: NJulie Zhu <julie.zhu@xilinx.com> Signed-off-by: NJohn Linn <john.linn@xilinx.com> Acked-by: NGrant Likely <grant.likely@secretlab.ca> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Matthew Wilcox 提交于
Use dev_dbg() instead of an unconditional printk(KERN_DEBUG). This has two benefits; one is that it identifies the USB device which the messages related to, and the other is that the messages won't be produced unless debug is turned on. Enable the debug messages when CONFIG_USB_STORAGE_DEBUG is set. Signed-off-by: NMatthew Wilcox <willy@linux.intel.com> Acked-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Matthew Wilcox 提交于
Instead of reporting "SCSI emulation for USB Mass Storage devices", report "usb-storage 1-4:1.0". Signed-off-by: NMatthew Wilcox <willy@linux.intel.com> Acked-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Matthew Wilcox 提交于
Knowing which configuration was chosen is a debugging aid more than it is informational. Signed-off-by: NMatthew Wilcox <willy@linux.intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Jason Wessel 提交于
No need to check ehci->debug twice. Found-by: Sergei Shtylyov sshtylyov@ru.mvista.com Signed-off-by: NJason Wessel <jason.wessel@windriver.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Roland Koebler 提交于
Add mark and space parity, since the device supports it. Signed-off-by: NRoland Koebler <r.koebler@yahoo.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 11 12月, 2009 7 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: workqueue: Add debugobjects support
-
git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen由 Linus Torvalds 提交于
* 'bugfix' of git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen: xen: try harder to balloon up under memory pressure. Xen balloon: fix totalram_pages counting. xen: explicitly create/destroy stop_machine workqueues outside suspend/resume region. xen: improve error handling in do_suspend. xen: don't leak IRQs over suspend/resume. xen: call clock resume notifier on all CPUs xen: use iret for return from 64b kernel to 32b usermode xen: don't call dpm_resume_noirq() with interrupts disabled. xen: register runstate info for boot CPU early xen: register runstate on secondary CPUs xen: register timer interrupt with IRQF_TIMER xen: correctly restore pfn_to_mfn_list_list after resume xen: restore runstate_info even if !have_vcpu_info_placement xen: re-register runstate area earlier on resume. xen: wait up to 5 minutes for device connetion xen: improvement to wait_for_devices() xen: fix is_disconnected_device/exists_disconnected_device xen/xenbus: make DEVICE_ATTR()s static
-
git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen由 Linus Torvalds 提交于
* 'xen/fbdev' of git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen: xen pvfb: Inhibit VM_IO flag to be set on vmalloc-ed framebuffers. fb-defio: Inhibit VM_IO flag to be set on vmalloc-ed framebuffers. fb-defio: If FBINFO_VIRTFB is defined, do not set VM_IO flag. Fix toogle whether xenbus driver should be built as module or part of kernel.
-
git://git.kernel.org/pub/scm/linux/kernel/git/teigland/dlm由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/dlm: dlm: always use GFP_NOFS
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4由 Linus Torvalds 提交于
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (47 commits) ext4: Fix potential fiemap deadlock (mmap_sem vs. i_data_sem) ext4: Do not override ext2 or ext3 if built they are built as modules jbd2: Export jbd2_log_start_commit to fix ext4 build ext4: Fix insufficient checks in EXT4_IOC_MOVE_EXT ext4: Wait for proper transaction commit on fsync ext4: fix incorrect block reservation on quota transfer. ext4: quota macros cleanup ext4: ext4_get_reserved_space() must return bytes instead of blocks ext4: remove blocks from inode prealloc list on failure ext4: wait for log to commit when umounting ext4: Avoid data / filesystem corruption when write fails to copy data ext4: Use ext4 file system driver for ext2/ext3 file system mounts ext4: Return the PTR_ERR of the correct pointer in setup_new_group_blocks() jbd2: Add ENOMEM checking in and for jbd2_journal_write_metadata_buffer() ext4: remove unused parameter wbc from __ext4_journalled_writepage() ext4: remove encountered_congestion trace ext4: move_extent_per_page() cleanup ext4: initialize moved_len before calling ext4_move_extents() ext4: Fix double-free of blocks with EXT4_IOC_MOVE_EXT ext4: use ext4_data_block_valid() in ext4_free_blocks() ...
-
git://git.open-osd.org/linux-open-osd由 Linus Torvalds 提交于
* 'for-linus' of git://git.open-osd.org/linux-open-osd: exofs: Multi-device mirror support exofs: Move all operations to an io_engine exofs: move osd.c to ios.c exofs: statfs blocks is sectors not FS blocks exofs: Prints on mount and unmout exofs: refactor exofs_i_info initialization into common helper exofs: dbg-print less exofs: More sane debug print trivial: some small fixes in exofs documentation
-
git://git.infradead.org/ubifs-2.6由 Linus Torvalds 提交于
* git://git.infradead.org/ubifs-2.6: UBIFS: fix return code in check_leaf UBI: flush wl before clearing update marker MAINTAINERS: change e-mail of Artem Bityutskiy UBIFS: remove manual O_SYNC handling UBIFS: support mounting of UBI volume character devices UBI: Add ubi_open_volume_path
-
- 10 12月, 2009 25 次提交
-
-
由 David Wong 提交于
This patch drops usage of floating point variable for 32bit build Signed-off-by: NDavid T. L. Wong <davidtlwong@gmail.com> Acked-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Boaz Harrosh 提交于
This patch changes on-disk format, it is accompanied with a parallel patch to mkfs.exofs that enables multi-device capabilities. After this patch, old exofs will refuse to mount a new formatted FS and new exofs will refuse an old format. This is done by moving the magic field offset inside the FSCB. A new FSCB *version* field was added. In the future, exofs will refuse to mount unmatched FSCB version. To up-grade or down-grade an exofs one must use mkfs.exofs --upgrade option before mounting. Introduced, a new object that contains a *device-table*. This object contains the default *data-map* and a linear array of devices information, which identifies the devices used in the filesystem. This object is only written to offline by mkfs.exofs. This is why it is kept separate from the FSCB, since the later is written to while mounted. Same partition number, same object number is used on all devices only the device varies. * define the new format, then load the device table on mount time make sure every thing is supported. * Change I/O engine to now support Mirror IO, .i.e write same data to multiple devices, read from a random device to spread the read-load from multiple clients (TODO: stripe read) Implementation notes: A few points introduced in previous patch should be mentioned here: * Special care was made so absolutlly all operation that have any chance of failing are done before any osd-request is executed. This is to minimize the need for a data consistency recovery, to only real IO errors. * Each IO state has a kref. It starts at 1, any osd-request executed will increment the kref, finally when all are executed the first ref is dropped. At IO-done, each request completion decrements the kref, the last one to return executes the internal _last_io() routine. _last_io() will call the registered io_state_done. On sync mode a caller does not supply a done method, indicating a synchronous request, the caller is put to sleep and a special io_state_done is registered that will awaken the caller. Though also in sync mode all operations are executed in parallel. Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com>
-
由 Boaz Harrosh 提交于
In anticipation for multi-device operations, we separate osd operations into an abstract I/O API. Currently only one device is used but later when adding more devices, we will drive all devices in parallel according to a "data_map" that describes how data is arranged on multiple devices. The file system level operates, like before, as if there is one object (inode-number) and an i_size. The io engine will split this to the same object-number but on multiple device. At first we introduce Mirror (raid 1) layout. But at the final outcome we intend to fully implement the pNFS-Objects data-map, including raid 0,4,5,6 over mirrored devices, over multiple device-groups. And more. See: http://tools.ietf.org/html/draft-ietf-nfsv4-pnfs-obj-12 * Define an io_state based API for accessing osd storage devices in an abstract way. Usage: First a caller allocates an io state with: exofs_get_io_state(struct exofs_sb_info *sbi, struct exofs_io_state** ios); Then calles one of: exofs_sbi_create(struct exofs_io_state *ios); exofs_sbi_remove(struct exofs_io_state *ios); exofs_sbi_write(struct exofs_io_state *ios); exofs_sbi_read(struct exofs_io_state *ios); exofs_oi_truncate(struct exofs_i_info *oi, u64 new_len); And when done exofs_put_io_state(struct exofs_io_state *ios); * Convert all source files to use this new API * Convert from bio_alloc to bio_kmalloc * In io engine we make use of the now fixed osd_req_decode_sense There are no functional changes or on disk additions after this patch. Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com>
-
由 Boaz Harrosh 提交于
If I do a "git mv" together with a massive code change and commit in one patch, git looses the rename and records a delete/new instead. This is bad because I want a rename recorded so later rebased/cherry-picked patches to the old name will work. Also the --follow is lost. Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com>
-
由 Boaz Harrosh 提交于
Even though exofs has a 4k block size, statfs blocks is in sectors (512 bytes). Also if target returns 0 for capacity then make it ULLONG_MAX. df does not like zero-size filesystems Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com>
-
由 Boaz Harrosh 提交于
It is important to print in the logs when a filesystem was mounted and eventually unmounted. Print the osd-device's osd_name and pid the FS was mounted/unmounted on. TODO: How to also print the namespace path the filesystem was mounted on? Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com>
-
由 Boaz Harrosh 提交于
There are two places that initialize inodes: exofs_iget() and exofs_new_inode() As more members of exofs_i_info that need initialization are added this code will grow. (soon) Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com>
-
由 Boaz Harrosh 提交于
Iner-loops printing is converted to EXOFS_DBG2 which is #defined to nothing. It is now almost bareable to just leave debug-on. Every operation is printed once, with most relevant info (I hope). Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com>
-
由 Boaz Harrosh 提交于
debug prints should be somewhat useful without actually reading the source code Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com>
-
Add exofs.txt to filesystems Documentation index and fix some typos, identation and grammar. Signed-off-by: NThadeu Lima de Souza Cascardo <cascardo@holoscopio.com> Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6由 Linus Torvalds 提交于
* 'acpica' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: ACPICA: Update version to 20091112. ACPICA: Add additional module-level code support ACPICA: Deploy new create integer interface where appropriate ACPICA: New internal utility function to create Integer objects ACPICA: Add repair for predefined methods that must return sorted lists ACPICA: Fix possible fault if return Package objects contain NULL elements ACPICA: Add post-order callback to acpi_walk_namespace ACPICA: Change package length error message to an info message ACPICA: Reduce severity of predefined repair messages, Warning to Info ACPICA: Update version to 20091013 ACPICA: Fix possible memory leak for Scope ASL operator ACPICA: Remove possibility of executing _REG methods twice ACPICA: Add repair for bad _MAT buffers ACPICA: Add repair for bad _BIF/_BIX packages
-
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging由 Linus Torvalds 提交于
* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: (41 commits) hwmon: (adt7475) Add VID support for the ADT7476 hwmon: (adt7475) Add an entry in MAINTAINERS hwmon: (adt7475) Add support for the ADT7476 hwmon: (adt7475) Voltage attenuators can be bypassed hwmon: (adt7475) Print device information on probe hwmon: (adt7475) Handle alternative pin functions hwmon: (adt7475) Move sysfs files removal to a separate function hwmon: (adt7475) Add support for the ADT7490 hwmon: (adt7475) Improve device detection hwmon: (adt7475) Add missing static marker hwmon: (adt7475) Rework voltage inputs handling hwmon: (adt7475) Implement pwm_use_point2_pwm_at_crit hwmon: (adt7475) New documentation hwmon: (adt7475) Add support for the ADT7473 hwmon: (f71882fg) Add support for the f71889fg (version 2) hwmon: (f71882fg) Fix sysfs file removal hwmon: (f71882fg) Cleanup sysfs attr creation 2/2 hwmon: (f71882fg) Cleanup sysfs attr creation 1/2 hwmon: (thmc50) Stop using I2C_CLIENT_MODULE_PARM hwmon: Add Freescale MC13783 ADC driver ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ALSA: ice1724 - aureon - modify WM8770 Master & DAC volume ALSA: hda/realtek: quirk for D945GCLF2 mainboard ALSA: hda - Terradici HDA controllers does not support 64-bit mode ALSA: document: Add direct git link to grub hda-analyzer ALSA: radio/sound/miro: fix build, cleanup depends/selects ALSA: hda - Generalize EAPD inversion check in patch_analog.c ASoC: Wrong variable returned on error ALSA: snd-usb-us122l: add product IDs of US-122MKII and US-144MKII ALSA: hda - Exclude unusable ADCs for ALC88x ALSA: hda - Add missing Line-Out and PCM switches as slave ALSA: hda - iMac 9,1 sound patch. ALSA: opti93x: set MC indirect registers base from PnP data
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (51 commits) Input: appletouch - give up maintainership Input: dm355evm_kbd - switch to using sparse keymap library Input: wistron_btns - switch to using sparse keymap library Input: add generic support for sparse keymaps Input: fix memory leak in force feedback core Input: wistron - remove identification strings from DMI table Input: psmouse - remove identification strings from DMI tables Input: atkbd - remove identification strings from DMI table Input: i8042 - remove identification strings from DMI tables DMI: allow omitting ident strings in DMI tables Input: psmouse - do not carry DMI data around Input: matrix-keypad - switch to using dev_pm_ops Input: keyboard - fix lack of locking when traversing handler->h_list Input: gpio_keys - scan gpio state at probe and resume time Input: keyboard - add locking around event handling Input: usbtouchscreen - add support for ET&T TC5UH touchscreen controller Input: xpad - add two new Xbox 360 devices Input: polled device - do not start polling if interval is zero Input: polled device - schedule first poll immediately Input: add S3C24XX touchscreen driver ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6由 Linus Torvalds 提交于
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (345 commits) V4L/DVB (13542): ir-keytable: Allow dynamic table change V4L/DVB (13541): atbm8830: replace 64-bit division and floating point usage V4L/DVB (13540): ir-common: Cleanup get key evdev code V4L/DVB (13539): ir-common: add __func__ for debug messages V4L/DVB (13538): ir-common: Use a dynamic keycode table V4L/DVB (13537): ir: Prepare the code for dynamic keycode table allocation V4L/DVB (13536): em28xx: Use the full RC5 code on HVR-950 Remote Controller V4L/DVB (13535): ir-common: Add a hauppauge new table with the complete RC5 code V4L/DVB (13534): ir-common: Remove some unused fields/structs V4L/DVB (13533): ir: use dynamic tables, instead of static ones V4L/DVB (13532): ir-common: Add infrastructure to use a dynamic keycode table V4L/DVB (13531): ir-common: rename the debug routine to allow exporting it V4L/DVB (13458): go7007: subdev conversion V4L/DVB (13457): s2250: subdev conversion V4L/DVB (13456): s2250: Change module structure V4L/DVB (13528): em28xx: add support for em2800 VC211A card em28xx: don't reduce scale to half size for em2800 em28xx: don't load audio modules when AC97 is mis-detected em28xx: em2800 chips support max width of 640 V4L/DVB (13523): dvb-bt8xx: fix compile warning ... Fix up trivial conflicts due to spelling fixes from the trivial tree in Documentation/video4linux/gspca.txt drivers/media/video/cx18/cx18-mailbox.h
-
git://git.fluff.org/bjdooks/linux由 Linus Torvalds 提交于
* 'next-i2c' of git://git.fluff.org/bjdooks/linux: (25 commits) i2c-pnx: Map I2C adapter number to platform ID number i2c-omap: OMAP3: PM: (re)init for every transfer to support off-mode i2c-designware: i2c_dw_handle_tx_abort: Use dev_dbg() for NOACK cases i2c-designware: Cosmetic cleanups i2c-designware: Tx abort cleanups i2c-designware: Skip RX_FULL and TX_EMPTY bits on tx abort errors i2c-designware: i2c_dw_xfer_msg: Fix error handling procedures i2c-designware: Disable TX_EMPTY when all i2c_msg msgs has been processed i2c-designware: Process all i2c_msg messages in the interrupt handler i2c-designware: i2c_dw_read: Remove redundant target address checker i2c-designware: i2c_dw_func: Set I2C_FUNC_SMBUS_foo bits i2c-designware: Initialize byte count variables just prior to being used i2c-designware: i2c_dw_xfer_msg: Introduce a local "buf" pointer i2c-designware: Divide i2c_dw_xfer_msg into two functions i2c-designware: Enable RX_FULL interrupt i2c-designware: Set Tx/Rx FIFO threshold levels i2c-designware: Process i2c_msg messages in the interrupt handler i2c-designware: i2c_dw_xfer_msg: Fix i2c_msg search bug i2c-designware: Improved _HCNT/_LCNT calculation i2c-designware: Remove an useless local variable "num" ...
-
git://git.fluff.org/bjdooks/linux由 Linus Torvalds 提交于
* 's3c24xx-updates' of git://git.fluff.org/bjdooks/linux: ARM: S3C24XX: DMA: Use valid index when accessing array ARM: S3C: move s3c_pwm_remove to .devexit.text ARM: S3C24XX: Export s3c24xx_set_fiq for modules. ARM: S3C: move s3c_adc_remove to .devexit.text
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-next-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-next-2.6: sl82c105: remove no longer needed debugging code sis5513: remove stale TODO pdc202xx_old: remove no longer needed debugging code cy82c693: remove no longer needed debugging code cmd64x: remove no longer needed debugging code alim15x3: remove obsolete and dangerous wdc_udma parameter ide: Increase WAIT_DRQ to accomodate some CF cards and SSD drives. cs5535: add pci id for AMD based CS5535 controllers slc90e66: fix UDMA handling drivers/ide/tx4938ide.c: use resource_size() drivers/ide/ide_platform.c: use resource_size() drivers/ide/au1xxx-ide.c: use resource_size() hpt366: remove dead old timing tables ide: update Kconfig text to mark as deprecated ide-tape: remove the BKL hpt366: kill unused #define's
-
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (42 commits) tree-wide: fix misspelling of "definition" in comments reiserfs: fix misspelling of "journaled" doc: Fix a typo in slub.txt. inotify: remove superfluous return code check hdlc: spelling fix in find_pvc() comment doc: fix regulator docs cut-and-pasteism mtd: Fix comment in Kconfig doc: Fix IRQ chip docs tree-wide: fix assorted typos all over the place drivers/ata/libata-sff.c: comment spelling fixes fix typos/grammos in Documentation/edac.txt sysctl: add missing comments fs/debugfs/inode.c: fix comment typos sgivwfb: Make use of ARRAY_SIZE. sky2: fix sky2_link_down copy/paste comment error tree-wide: fix typos "couter" -> "counter" tree-wide: fix typos "offest" -> "offset" fix kerneldoc for set_irq_msi() spidev: fix double "of of" in comment comment typo fix: sybsystem -> subsystem ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: add multi-input quirk for NextWindow Touchscreen. HID: add support for Acan FG-8100 barcode reader HID: make Media key on Logitech DiNovo Mini work HID: support Logitech/3DConnexion SpaceTraveler and SpaceNavigator HID: remove BKL from hiddev_ioctl_usage() HID: fixup quirk for NCR devices HID: pidff - fix unnecessary loop iterations on reset HID: add NOGET quirk for another device from CH Products HID: remove useless DRIVER_VERSION macro HID: fix MODULE_AUTHOR usage in HID modules HID: blacklist Acer Ferrari 4005 optical mouse
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (222 commits) [SCSI] zfcp: Remove flag ZFCP_STATUS_FSFREQ_TMFUNCNOTSUPP [SCSI] zfcp: Activate fc4s attributes for zfcp in FC transport class [SCSI] zfcp: Block scsi_eh thread for rport state BLOCKED [SCSI] zfcp: Update FSF error reporting [SCSI] zfcp: Improve ELS ADISC handling [SCSI] zfcp: Simplify handling of ct and els requests [SCSI] zfcp: Remove ZFCP_DID_MASK [SCSI] zfcp: Move WKA port to zfcp FC code [SCSI] zfcp: Use common code definitions for FC CT structs [SCSI] zfcp: Use common code definitions for FC ELS structs [SCSI] zfcp: Update FCP protocol related code [SCSI] zfcp: Dont fail SCSI commands when transitioning to blocked fc_rport [SCSI] zfcp: Assign scheduled work to driver queue [SCSI] zfcp: Remove STATUS_COMMON_REMOVE flag as it is not required anymore [SCSI] zfcp: Implement module unloading [SCSI] zfcp: Merge trace code for fsf requests in one function [SCSI] zfcp: Access ports and units with container_of in sysfs code [SCSI] zfcp: Remove suspend callback [SCSI] zfcp: Remove global config_mutex [SCSI] zfcp: Replace local reference counting with common kref ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: m68knommu: export clk_* symbols in clk.c m68knommu: Split the .init section into INIT_TEXT_SECTION and INIT_DATA_SECTION. m68knommu: Move __init_end out of the .init section. m68knommu: Move __init_begin out of the .init section. m68knommu: Use more macros inside the .init section. m68knommu: Use INIT_TASK_DATA and CACHELINE_ALIGNED_DATA. m68knommu: Make THREAD_SIZE available to assembly files. m68knommu: Don't hardcode the value of PAGE_SIZE in the linker script. m68knommu: rename BSS define in linker script m68knommu: add a task_pt_regs() macro m68knommu: define arch_has_single_step() and friends m68knommu: add uboot commandline argument passing support m68knommu: Coldfire GPIO corrections m68knommu: move mcf_remove to .devexit.text Fixed up (?) conflict in arch/m68k/include/asm/ptrace.h
-
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6由 Linus Torvalds 提交于
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6: [IA64] Fix cut/paste detritus from unistd.h
-
git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (137 commits) sh: include empty zero page in romImage sh: Make associative cache writes fatal on all SH-4A parts. sh: Drop associative writes for SH-4 cache flushes. sh: Partial revert of copy/clear_user_highpage() optimizations. sh: Add default uImage rule for se7724, ap325rxa, and migor. sh: allow runtime pm without suspend/resume callbacks sh: mach-ecovec24: Remove un-defined settings for VPU sh: mach-ecovec24: LCDC drive ability become high sh: fix sh7724 VEU3F resource size serial: sh-sci: Fix too early port disabling. sh: pfc: pr_info() -> pr_debug() cleanups. sh: pfc: Convert from ctrl_xxx() to __raw_xxx() I/O routines. sh: Improve kfr2r09 serial port setup code sh: Break out SuperH PFC code sh: Move KEYSC header file sh: convert /proc/cpu/aligmnent, /proc/cpu/kernel_alignment to seq_file sh: Add CPG save/restore code for sh7724 R-standby sh: Add SDHI power control support to Ecovec mfd: Add power control platform data to SDHI driver sh: mach-ecovec24: modify address map ...
-
由 Linus Torvalds 提交于
Merge branch 'davinci-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-davinci * 'davinci-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-davinci: (69 commits) davinci: Initial support for Neuros OSD2 platform. davinci: remove unused variable in arch/arm/mach-davinci/board-sffsdr.c davinci: fix section mismatch warning in arch/arm/mach-davinci/board-dm646x-evm.c DaVinci: DM365: Enable DaVinci RTC support for DM365 EVM DA8xx/OMAP-L1xx: Add high speed SD/MMC capabilities davinci: DA8XX/OMAP-L1XX: enable cpuidle and regulator in defconfig davinci: DA850/OMAP-L138: avoid using separate initcall for initializing regulator davinci: DA850/OMAP-L138 EVM: register for cpuidle support davinci: DA8XX/OMAP-L1XX: add support for cpuidle driver register davinci: add CPU idle driver davinci: DA8XX/OMAP-L1XX: fix compiler warning davinci: DA850/OMAP-L138: eliminate static function declaration davinci: DA850/OMAP-L138 EVM: simplify configuration of emac in MII/RMII mode davinci: DA850/OMAP-L138 EVM: get rid of DA850_UI_EXP config option davinci: DA850/OMAP-L138 EVM: implement autodetect of RMII PHY davinci: DA830/OMAP-L137 EVM: do not configure NAND on UI card when MMC/SD is selected davinci: DA830/OMAP-L137 EVM: use runtime detection for UI card davinci: DA830/OMAP-L137 EVM: remove ifdefs inside da830_evm_init() davinci: DA830/OMAP-L137 EVM: fix warning with default config davinci: Add NAND support for DA830/OMAP-L137 EVM platform ...
-