- 19 12月, 2014 4 次提交
-
-
由 Pintu Kumar 提交于
This patch include CMA info (CMATotal, CMAFree) in /proc/meminfo. Currently, in a CMA enabled system, if somebody wants to know the total CMA size declared, there is no way to tell, other than the dmesg or /var/log/messages logs. With this patch we are showing the CMA info as part of meminfo, so that it can be determined at any point of time. This will be populated only when CMA is enabled. Below is the sample output from a ARM based device with RAM:512MB and CMA:16MB. MemTotal: 471172 kB MemFree: 111712 kB MemAvailable: 271172 kB . . . CmaTotal: 16384 kB CmaFree: 6144 kB This patch also fix below checkpatch errors that were found during these changes. ERROR: space required after that ',' (ctx:ExV) 199: FILE: fs/proc/meminfo.c:199: + ,atomic_long_read(&num_poisoned_pages) << (PAGE_SHIFT - 10) ^ ERROR: space required after that ',' (ctx:ExV) 202: FILE: fs/proc/meminfo.c:202: + ,K(global_page_state(NR_ANON_TRANSPARENT_HUGEPAGES) * ^ ERROR: space required after that ',' (ctx:ExV) 206: FILE: fs/proc/meminfo.c:206: + ,K(totalcma_pages) ^ total: 3 errors, 0 warnings, 2 checks, 236 lines checked Signed-off-by: NPintu Kumar <pintu.k@samsung.com> Signed-off-by: NVishnu Pratap Singh <vishnu.ps@samsung.com> Acked-by: NMichal Nazarewicz <mina86@mina86.com> Cc: Rafael Aquini <aquini@redhat.com> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Pintu Kumar 提交于
When the system boots up, in the dmesg logs we can see the memory statistics along with total reserved as below. Memory: 458840k/458840k available, 65448k reserved, 0K highmem When CMA is enabled, still the total reserved memory remains the same. However, the CMA memory is not considered as reserved. But, when we see /proc/meminfo, the CMA memory is part of free memory. This creates confusion. This patch corrects the problem by properly subtracting the CMA reserved memory from the total reserved memory in dmesg logs. Below is the dmesg snapshot from an arm based device with 512MB RAM and 12MB single CMA region. Before this change: Memory: 458840k/458840k available, 65448k reserved, 0K highmem After this change: Memory: 458840k/458840k available, 53160k reserved, 12288k cma-reserved, 0K highmem Signed-off-by: NPintu Kumar <pintu.k@samsung.com> Signed-off-by: NVishnu Pratap Singh <vishnu.ps@samsung.com> Acked-by: NMichal Nazarewicz <mina86@mina86.com> Cc: Rafael Aquini <aquini@redhat.com> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Sougata Santra 提交于
Longname is not correctly handled by hfsplus driver. If an attempt to create a longname(>255) file/directory is made, it succeeds by creating a file/directory with HFSPLUS_MAX_STRLEN and incorrect catalog key. Thus leaving the volume in an inconsistent state. This patch fixes this issue. Although lookup is always called first to create a negative entry, so just doing a check in lookup would probably fix this issue. I choose to propagate error to other iops as well. Please NOTE: I have factored out hfsplus_cat_build_key_with_cnid from hfsplus_cat_build_key, to avoid unncessary branching. Thanks a lot. TEST: ------ dir="TEST_DIR" cdir=`pwd` name255="_123456789_123456789_123456789_123456789_123456789_123456789\ _123456789_123456789_123456789_123456789_123456789_123456789_123456789\ _123456789_123456789_123456789_123456789_123456789_123456789_123456789\ _123456789_123456789_123456789_123456789_123456789_1234" name256="${name255}5" mkdir $dir cd $dir touch $name255 rm -f $name255 touch $name256 ls -la cd $cdir rm -rf $dir RESULT: ------- [sougata@ultrabook tmp]$ cdir=`pwd` [sougata@ultrabook tmp]$ name255="_123456789_123456789_123456789_123456789_123456789_123456789\ > _123456789_123456789_123456789_123456789_123456789_123456789_123456789\ > _123456789_123456789_123456789_123456789_123456789_123456789_123456789\ > _123456789_123456789_123456789_123456789_123456789_1234" [sougata@ultrabook tmp]$ name256="${name255}5" [sougata@ultrabook tmp]$ [sougata@ultrabook tmp]$ mkdir $dir [sougata@ultrabook tmp]$ cd $dir [sougata@ultrabook TEST_DIR]$ touch $name255 [sougata@ultrabook TEST_DIR]$ rm -f $name255 [sougata@ultrabook TEST_DIR]$ touch $name256 [sougata@ultrabook TEST_DIR]$ ls -la ls: cannot access _123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_1234: No such file or directory total 0 drwxrwxr-x 1 sougata sougata 3 Feb 20 19:56 . drwxrwxrwx 1 root root 6 Feb 20 19:56 .. -????????? ? ? ? ? ? _123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_1234 [sougata@ultrabook TEST_DIR]$ cd $cdir [sougata@ultrabook tmp]$ rm -rf $dir rm: cannot remove `TEST_DIR': Directory not empty -ENAMETOOLONG returned from hfsplus_asc2uni was not propaged to iops. This allowed hfsplus to create files/directories with HFSPLUS_MAX_STRLEN and incorrect keys, leaving the FS in an inconsistent state. This patch fixes this issue. Signed-off-by: NSougata Santra <sougata@tuxera.com> Reviewed-by: NChristoph Hellwig <hch@lst.de> Cc: Vyacheslav Dubeyko <slava@dubeyko.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Zhihui Zhang 提交于
When nodes is true, nsc->mask2 has already been filtered by nsc->mask1, which has already factored in node_states[N_MEMORY]. Signed-off-by: NZhihui Zhang <zzhsuny@gmail.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Oleg Nesterov <oleg@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 18 12月, 2014 36 次提交
-
-
由 Linus Torvalds 提交于
Neither Sage nor I noticed that Zheng Yan had mistakenly committed fs/ceph/super.h.rej as part of commit 31c542a1 ("ceph: add inline data to pagecache"). Remove it. Requested-by: NYan, Zheng <ukernel@gmail.com> Cc: Sage Weil <sweil@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client由 Linus Torvalds 提交于
Pull ceph updates from Sage Weil: "The big item here is support for inline data for CephFS and for message signatures from Zheng. There are also several bug fixes, including interrupted flock request handling, 0-length xattrs, mksnap, cached readdir results, and a message version compat field. Finally there are several cleanups from Ilya, Dan, and Markus. Note that there is another series coming soon that fixes some bugs in the RBD 'lingering' requests, but it isn't quite ready yet" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: (27 commits) ceph: fix setting empty extended attribute ceph: fix mksnap crash ceph: do_sync is never initialized libceph: fixup includes in pagelist.h ceph: support inline data feature ceph: flush inline version ceph: convert inline data to normal data before data write ceph: sync read inline data ceph: fetch inline data when getting Fcr cap refs ceph: use getattr request to fetch inline data ceph: add inline data to pagecache ceph: parse inline data in MClientReply and MClientCaps libceph: specify position of extent operation libceph: add CREATE osd operation support libceph: add SETXATTR/CMPXATTR osd operations support rbd: don't treat CEPH_OSD_OP_DELETE as extent op ceph: remove unused stringification macros libceph: require cephx message signature by default ceph: introduce global empty snap context ceph: message versioning fixes ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace由 Linus Torvalds 提交于
Pull user namespace related fixes from Eric Biederman: "As these are bug fixes almost all of thes changes are marked for backporting to stable. The first change (implicitly adding MNT_NODEV on remount) addresses a regression that was created when security issues with unprivileged remount were closed. I go on to update the remount test to make it easy to detect if this issue reoccurs. Then there are a handful of mount and umount related fixes. Then half of the changes deal with the a recently discovered design bug in the permission checks of gid_map. Unix since the beginning has allowed setting group permissions on files to less than the user and other permissions (aka ---rwx---rwx). As the unix permission checks stop as soon as a group matches, and setgroups allows setting groups that can not later be dropped, results in a situtation where it is possible to legitimately use a group to assign fewer privileges to a process. Which means dropping a group can increase a processes privileges. The fix I have adopted is that gid_map is now no longer writable without privilege unless the new file /proc/self/setgroups has been set to permanently disable setgroups. The bulk of user namespace using applications even the applications using applications using user namespaces without privilege remain unaffected by this change. Unfortunately this ix breaks a couple user space applications, that were relying on the problematic behavior (one of which was tools/selftests/mount/unprivileged-remount-test.c). To hopefully prevent needing a regression fix on top of my security fix I rounded folks who work with the container implementations mostly like to be affected and encouraged them to test the changes. > So far nothing broke on my libvirt-lxc test bed. :-) > Tested with openSUSE 13.2 and libvirt 1.2.9. > Tested-by: Richard Weinberger <richard@nod.at> > Tested on Fedora20 with libvirt 1.2.11, works fine. > Tested-by: Chen Hanxiao <chenhanxiao@cn.fujitsu.com> > Ok, thanks - yes, unprivileged lxc is working fine with your kernels. > Just to be sure I was testing the right thing I also tested using > my unprivileged nsexec testcases, and they failed on setgroup/setgid > as now expected, and succeeded there without your patches. > Tested-by: Serge Hallyn <serge.hallyn@ubuntu.com> > I tested this with Sandstorm. It breaks as is and it works if I add > the setgroups thing. > Tested-by: Andy Lutomirski <luto@amacapital.net> # breaks things as designed :(" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: userns: Unbreak the unprivileged remount tests userns; Correct the comment in map_write userns: Allow setting gid_maps without privilege when setgroups is disabled userns: Add a knob to disable setgroups on a per user namespace basis userns: Rename id_map_mutex to userns_state_mutex userns: Only allow the creator of the userns unprivileged mappings userns: Check euid no fsuid when establishing an unprivileged uid mapping userns: Don't allow unprivileged creation of gid mappings userns: Don't allow setgroups until a gid mapping has been setablished userns: Document what the invariant required for safe unprivileged mappings. groups: Consolidate the setgroups permission checks mnt: Clear mnt_expire during pivot_root mnt: Carefully set CL_UNPRIVILEGED in clone_mnt mnt: Move the clear of MNT_LOCKED from copy_tree to it's callers. umount: Do not allow unmounting rootfs. umount: Disallow unprivileged mount force mnt: Update unprivileged remount test mnt: Implicitly add MNT_NODEV on remount when it was implicitly added by mount
-
由 Linus Torvalds 提交于
Dave Hansen reports that commit fb7332a9 ("mmu_gather: move minimal range calculations into generic code") caused a performance problem: "tlb_finish_mmu() goes up about 9x in the profiles (~0.4%->3.6%) and tlb_flush_mmu_free() takes about 3.1% of CPU time with the patch applied, but does not show up at all on the commit before" and the reason is that Will moved the test for whether we need to flush from tlb_flush_mmu() into tlb_flush_mmu_tlbonly(). But that meant that tlb_flush_mmu_free() basically lost that check. Move it back into tlb_flush_mmu() where it belongs, so that it covers both tlb_flush_mmu_tlbonly() _and_ tlb_flush_mmu_free(). Reported-and-tested-by: NDave Hansen <dave@sr71.net> Acked-by: NWill Deacon <will.deacon@arm.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
My commit 26178ec1 ("x86: mm: consolidate VM_FAULT_RETRY handling") had a really stupid typo: the FAULT_FLAG_USER bit is in the 'flags' variable, not the 'fault' variable. Duh, The one silver lining in this is that Dave finding this at least confirms that trinity actually triggers this special path easily, in a way normal use does not. Reported-by: NDave Jones <davej@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://github.com/awilliam/linux-vfio由 Linus Torvalds 提交于
Pull VFIO updates from Alex Williamson: - s390 support (Frank Blaschka) - Enable iommu-type1 for ARM SMMU (Will Deacon) * tag 'vfio-v3.19-rc1' of git://github.com/awilliam/linux-vfio: drivers/vfio: allow type-1 IOMMU instantiation on top of an ARM SMMU vfio: make vfio run on s390
-
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux由 Linus Torvalds 提交于
Pull virtio updates from Rusty Russell: "A balloon enhancement, and a minor race-on-module-unload theoretical bug which doesn't merit cc: stable. All the exciting stuff went via MST this cycle" * tag 'virtio-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: virtio_balloon: free some memory from balloon on OOM virtio_balloon: return the amount of freed memory from leak_balloon() virtio_blk: fix race at module removal virtio: Fix comment typo 'CONFIG_S_FAILED'
-
git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux由 Linus Torvalds 提交于
Pull thermal management update from Zhang Rui: "Summary: - of-thermal extension to allow drivers to register and use its functionality in a better way, without exploiting thermal core. From Lukasz Majewski. - Fix a bug in intel_soc_dts_thermal driver which calls a sleep function in interrupt handler. From Maurice Petallo. - add a thermal UAPI header file for exporting the thermal generic netlink information to user-space. From Florian Fainelli. - First round of refactoring in Exynos driver. Bartlomiej and Lukasz are attempting to make it lean and easier to understand. - New thermal driver for Rockchip (rk3288), with support for DT thermal. From Caesar Wang. - New thermal driver for Nvidia, Tegra124 SOCTHERM driver, with support for DT thermal. From Mikko Perttunen. - New cooling device, based on common clock framework. From Eduardo Valentin. - a couple of small fixes in thermal core framework. From Srinivas Pandruvada, Javi Merino, Luis Henriques. - Dropping Armada A375-Z1 SoC thermal support as the chip is not in the market, armada folks decided to drop its support. - a couple of small fixes and cleanups in int340x thermal driver" * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: (58 commits) thermal: provide an UAPI header file Thermal/int340x: Clear the error value of the last acpi_bus_get_device() call thermal/powerclamp: add id for braswell cpu thermal: Intel SoC DTS: Don't do thermal zone update inside spin_lock Thermal: fix platform_no_drv_owner.cocci warnings Thermal/int340x: avoid unnecessary pointer casting thermal: int3403: Delete a check before thermal_zone_device_unregister() thermal/int3400: export uuids thermal: of: Extend current of-thermal.c code to allow setting emulated temp thermal: of: Extend of-thermal to export table of trip points thermal: of: Rename struct __thermal_trip to struct thermal_trip thermal: of: Extend of-thermal.c to provide check if trip point is valid thermal: of: Extend of-thermal.c to provide number of trip points thermal: Fix error path in thermal_init() thermal: lock the thermal zone when switching governors thermal: core: ignore invalid trip temperature thermal: armada: Remove support for A375-Z1 SoC thermal: rockchip: add driver for thermal dt-bindings: document Rockchip thermal thermal: exynos: remove exynos_tmu_data.h include ...
-
由 Linus Torvalds 提交于
Merge tag 'pwm/for-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm Pull pwm updates from Thierry Reding: "There are two new drivers, one for the BCM2835 (Raspberry Pi) and one used in conjunction with the LCD controller on various Atmel SoCs. The Samsung PWM driver can now be built for 64-bit ARM (Exynos7). A couple of fixes have been applied to the FTM PWM driver and system sleep support was added" * tag 'pwm/for-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: pwm: atmel-hlcdc: add at91sam9x5 and sama5d3 errata handling pwm: ftm: Add Power Management support for FTM PWM pwm: ftm: Add regmap rbtree type cache support pwm: ftm: Correctly track usage count pwm: samsung: Allow Samsung PWM driver to be enabled on Exynos7 pwm: add DT bindings documentation for atmel-hlcdc-pwm driver pwm: add support for atmel-hlcdc-pwm device pwm: Add BCM2835 PWM driver
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input由 Linus Torvalds 提交于
Pull input subsystem updates from Dmitry Torokhov: "Two new drivers for Elan hardware (for I2C touchpad and touchscreen found in several Chromebooks and other devices), a driver for Goodix touch panel, and small fixes to Cypress I2C trackpad and other input drivers. Also we switched to use __maybe_unused instead of gating suspend/ resume code with #ifdef guards to get better compile coverage" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (27 commits) Input: gpio_keys - fix warning regarding uninitialized 'button' variable Input: add support for Elan eKTH I2C touchscreens Input: gpio_keys - fix warning regarding uninitialized 'irq' variable Input: cyapa - use 'error' for error codes Input: cyapa - fix resuming the device Input: gpio_keys - add device tree support for interrupt only keys Input: amikbd - allocate temporary keymap buffer on the stack Input: amikbd - fix build if !CONFIG_HW_CONSOLE Input: lm8323 - missing error check in lm8323_set_disable() Input: initialize device counter variables with -1 Input: initialize input_no to -1 to avoid subtraction Input: i8042 - do not try to load on Intel NUC D54250WYK Input: atkbd - correct MSC_SCAN events for force_release keys Input: cyapa - switch to using managed resources Input: lifebook - use "static inline" instead of "inline" in lifebook.h Input: touchscreen - use __maybe_unused instead of ifdef around suspend/resume Input: mouse - use __maybe_unused instead of ifdef around suspend/resume Input: misc - use __maybe_unused instead of ifdef around suspend/resume Input: cap11xx - support for irq-active-high option Input: cap11xx - add support for various cap11xx devices ...
-
git://git.infradead.org/linux-mtd由 Linus Torvalds 提交于
Pull MTD updates from Brian Norris: "Summary: - Add device tree support for DoC3 - SPI NOR: Refactoring, for better layering between spi-nor.c and its driver users (e.g., m25p80.c) New flash device support Support 6-byte ID strings - NAND: New NAND driver for Allwinner SoC's (sunxi) GPMI NAND: add support for raw (no ECC) access, for testing purposes Add ATO manufacturer ID A few odd driver fixes - MTD tests: Allow testers to compensate for OOB bitflips in oobtest Fix a torturetest regression - nandsim: Support longer ID byte strings And more" * tag 'for-linus-20141215' of git://git.infradead.org/linux-mtd: (63 commits) mtd: tests: abort torturetest on erase errors mtd: physmap_of: fix potential NULL dereference mtd: spi-nor: allow NULL as chip name and try to auto detect it mtd: nand: gpmi: add raw oob access functions mtd: nand: gpmi: add proper raw access support mtd: nand: gpmi: add gpmi_copy_bits function mtd: spi-nor: factor out write_enable() for erase commands mtd: spi-nor: add support for s25fl128s mtd: spi-nor: remove the jedec_id/ext_id mtd: spi-nor: add id/id_len for flash_info{} mtd: nand: correct the comment of function nand_block_isreserved() jffs2: Drop bogus if in comment mtd: atmel_nand: replace memcpy32_toio/memcpy32_fromio with memcpy mtd: cafe_nand: drop duplicate .write_page implementation mtd: m25p80: Add support for serial flash Spansion S25FL132K MTD: m25p80: fix inconsistency in m25p_ids compared to spi_nor_ids mtd: spi-nor: improve wait-till-ready timeout loop mtd: delete unnecessary checks before two function calls mtd: nand: omap: Fix NAND enumeration on 3430 LDP mtd: nand: add ATO manufacturer info ...
-
git://git.monstr.eu/linux-2.6-microblaze由 Linus Torvalds 提交于
Pull Microblaze fix from Michal Simek: "Fix mmap for cache coherent memory" * tag 'microblaze-3.19-rc1' of git://git.monstr.eu/linux-2.6-microblaze: microblaze: Fix mmap for cache coherent memory
-
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security由 Linus Torvalds 提交于
Pull security subsystem fixes from James Morris. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: KEYS: remove a bogus NULL check ima: Fix build failure on powerpc when TCG_IBMVTPM dependencies are not met KEYS: Fix stale key registration at error path
-
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse由 Linus Torvalds 提交于
Pull fuse update from Miklos Szeredi: "The first part makes sure we don't hold up umount with pending async requests. In addition to being a cleanup, this is a small behavioral change (for the better) and unlikely to break anything. The second part prepares for a cleanup of the fuse device I/O code by adding a helper for simple request submission, with some savings in line numbers already realized" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: fuse: use file_inode() in fuse_file_fallocate() fuse: introduce fuse_simple_request() helper fuse: reduce max out args fuse: hold inode instead of path after release fuse: flush requests on umount fuse: don't wake up reserved req in fuse_conn_kill()
-
由 Yan, Zheng 提交于
make sure 'value' is not null. otherwise __ceph_setxattr will remove the extended attribute. Signed-off-by: NYan, Zheng <zyan@redhat.com> Reviewed-by: NSage Weil <sage@redhat.com>
-
由 Yan, Zheng 提交于
mksnap reply only contain 'target', does not contain 'dentry'. So it's wrong to use req->r_reply_info.head->is_dentry to detect traceless reply. Signed-off-by: NYan, Zheng <zyan@redhat.com> Reviewed-by: NSage Weil <sage@redhat.com>
-
由 Dan Carpenter 提交于
Probably this code was syncing a lot more often then intended because the do_sync variable wasn't set to zero. Cc: stable@vger.kernel.org # v3.11+ Fixes: c62988ec ('ceph: avoid meaningless calling ceph_caps_revoking if sync_mode == WB_SYNC_ALL.') Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NIlya Dryomov <idryomov@redhat.com>
-
由 Ilya Dryomov 提交于
pagelist.h needs to include linux/types.h and asm/byteorder.h and not rely on other headers pulling yet another set of headers. Signed-off-by: NIlya Dryomov <idryomov@redhat.com>
-
由 Yan, Zheng 提交于
Signed-off-by: NYan, Zheng <zyan@redhat.com>
-
由 Yan, Zheng 提交于
After converting inline data to normal data, client need to flush the new i_inline_version (CEPH_INLINE_NONE) to MDS. This commit makes cap messages (sent to MDS) contain inline_version and inline_data. Client always converts inline data to normal data before data write, so the inline data length part is always zero. Signed-off-by: NYan, Zheng <zyan@redhat.com>
-
由 Yan, Zheng 提交于
Before any data write, convert inline data to normal data and set i_inline_version to CEPH_INLINE_NONE. The OSD request that saves inline data to object contains 3 operations (CMPXATTR, WRITE and SETXATTR). It compares a xattr named 'inline_version' to prevent old data overwrites newer data. Signed-off-by: NYan, Zheng <zyan@redhat.com>
-
由 Yan, Zheng 提交于
we can't use getattr to fetch inline data while holding Fr cap, because it can cause deadlock. If we need to sync read inline data, drop cap refs first, then use getattr to fetch inline data. Signed-off-by: NYan, Zheng <zyan@redhat.com>
-
由 Yan, Zheng 提交于
we can't use getattr to fetch inline data after getting Fcr caps, because it can cause deadlock. The solution is try bringing inline data to page cache when not holding any cap, and hope the inline data page is still there after getting the Fcr caps. If the page is still there, pin it in page cache for later IO. Signed-off-by: NYan, Zheng <zyan@redhat.com>
-
由 Yan, Zheng 提交于
Add a new parameter 'locked_page' to ceph_do_getattr(). If inline data in getattr reply will be copied to the page. Signed-off-by: NYan, Zheng <zyan@redhat.com>
-
由 Yan, Zheng 提交于
Request reply and cap message can contain inline data. add inline data to the page cache if there is Fc cap. Signed-off-by: NYan, Zheng <zyan@redhat.com>
-
由 Yan, Zheng 提交于
Signed-off-by: NYan, Zheng <zyan@redhat.com>
-
由 Yan, Zheng 提交于
allow specifying position of extent operation in multi-operations osd request. This is required for cephfs to convert inline data to normal data (compare xattr, then write object). Signed-off-by: NYan, Zheng <zyan@redhat.com> Reviewed-by: NIlya Dryomov <idryomov@redhat.com>
-
由 Yan, Zheng 提交于
Add CEPH_OSD_OP_CREATE support. Also change libceph to not treat CEPH_OSD_OP_DELETE as an extent op and add an assert to that end. Signed-off-by: NYan, Zheng <zyan@redhat.com> Reviewed-by: NIlya Dryomov <idryomov@redhat.com>
-
由 Yan, Zheng 提交于
Signed-off-by: NYan, Zheng <zyan@redhat.com> Reviewed-by: NIlya Dryomov <idryomov@redhat.com>
-
由 Ilya Dryomov 提交于
CEPH_OSD_OP_DELETE is not an extent op, stop treating it as such. This sneaked in with discard patches - it's one of the three osd ops (the other two are CEPH_OSD_OP_TRUNCATE and CEPH_OSD_OP_ZERO) that discard is implemented with. Signed-off-by: NIlya Dryomov <idryomov@redhat.com> Reviewed-by: NAlex Elder <elder@linaro.org>
-
由 Ilya Dryomov 提交于
These were used to report git versions a long time ago. Signed-off-by: NIlya Dryomov <idryomov@redhat.com>
-
由 Yan, Zheng 提交于
Signed-off-by: NYan, Zheng <zyan@redhat.com> Reviewed-by: NIlya Dryomov <idryomov@redhat.com>
-
由 Yan, Zheng 提交于
Current snaphost code does not properly handle moving inode from one empty snap realm to another empty snap realm. After changing inode's snap realm, some dirty pages' snap context can be not equal to inode's i_head_snap. This can trigger BUG() in ceph_put_wrbuffer_cap_refs() The fix is introduce a global empty snap context for all empty snap realm. This avoids triggering the BUG() for filesystem with no snapshot. Fixes: http://tracker.ceph.com/issues/9928Signed-off-by: NYan, Zheng <zyan@redhat.com> Reviewed-by: NIlya Dryomov <idryomov@redhat.com>
-
由 John Spray 提交于
There were two places we were assigning version in host byte order instead of network byte order. Also in MSG_CLIENT_SESSION we weren't setting compat_version in the header to reflect continued compatability with older MDSs. Fixes: http://tracker.ceph.com/issues/9945Signed-off-by: NJohn Spray <john.spray@redhat.com> Reviewed-by: NSage Weil <sage@redhat.com>
-
由 John Spray 提交于
2 bytes of what was reserved space is now used by userspace for the compat_version field. Signed-off-by: NJohn Spray <john.spray@redhat.com> Reviewed-by: NSage Weil <sage@redhat.com>
-
由 Yan, Zheng 提交于
Signed-off-by: NYan, Zheng <zyan@redhat.com>
-