- 17 4月, 2005 40 次提交
-
-
由 Roland Dreier 提交于
Fix bug in MTT allocation in mem-free mode. I misunderstood the MTT size value returned by the firmware -- it is really the size of a single MTT entry, since mem-free mode does not segment the MTT as the original firmware did. This meant that our MTT addresses ended up being off by a factor of 8. This meant that our MTT allocations might overlap, and so we could overwrite and corrupt earlier memory regions when writing new MTT entries. We fix this by always using our 64-byte MTT segment size. This allows some simplification of the code as well, since there's no reason to put the MTT segment size in a variable -- we can always use our enum value directly. Signed-off-by: NRoland Dreier <roland@topspin.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Roland Dreier 提交于
Add code to support RDMA and atomic send work requests in mem-free mode. Signed-off-by: NRoland Dreier <roland@topspin.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Roland Dreier 提交于
CQ numbers are only 24 bits, so only print 6 hex digits and mask off reserved part when reporting a CQ event. Signed-off-by: NRoland Dreier <roland@topspin.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Roland Dreier 提交于
On error path, only free doorbell records if we're in mem-free mode. Signed-off-by: NRoland Dreier <roland@topspin.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Roland Dreier 提交于
Print IRQ number when NOP command interrupt test fails to help debugging. Signed-off-by: NRoland Dreier <roland@topspin.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Roland Dreier 提交于
Release mutex on error return path from mthca_alloc_db(). Signed-off-by: NRoland Dreier <roland@topspin.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Michael S. Tsirkin 提交于
Fix error handling in MR allocation for mem-free mode: mthca_free must get an MR index, not a key. Signed-off-by: NMichael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: NRoland Dreier <roland@topspin.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Roland Dreier 提交于
Doorbell record pages are allocated in HCA page size chunks (always 4096 bytes), so we need to divide by 4096 and not PAGE_SIZE when figuring out how many pages we'll need space for. Signed-off-by: NRoland Dreier <roland@topspin.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Roland Dreier 提交于
It's cleaner to kfree mthca_mr, and not rely on the fact that ib_mr is the first field in mthca_mr. Signed-off-by: NMichael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: NRoland Dreier <roland@topspin.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Michael S. Tsirkin 提交于
The first buffer of a memory region is not required to be page-aligned, so don't return an error if it's not. Signed-off-by: NMichael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: NRoland Dreier <roland@topspin.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Roland Dreier 提交于
When posting a work request with immediate data, put the immediate data in the immediate data field of the hardware's work request (rather than overwriting the flags field). Signed-off-by: NRoland Dreier <roland@topspin.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Roland Dreier 提交于
Fix calculation of rdb_shift by using original number of QPs, not their slot in profile[] (which will be rearranged when we sort it). Signed-off-by: NRoland Dreier <roland@topspin.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Roland Dreier 提交于
Implement more of the device_query method in mthca. Signed-off-by: NRoland Dreier <roland@topspin.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Roland Dreier 提交于
In mem-free mode, when allocating memory regions, make sure that the HCA has context memory mapped to cover the virtual space used for the MPT and MTTs being used. Signed-off-by: NRoland Dreier <roland@topspin.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Hal Rosenstock 提交于
Eliminate unneeded and misleading comments Signed-off-by: NHal Rosenstock <halr@voltaire.com> Signed-off-by: NRoland Dreier <roland@topspin.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Roland Dreier 提交于
Fix handling of MAD agent registrations with mgmt_class == 0. In this case ib_umad should pass a NULL registration request to the MAD core rather than a request with mgmt_class set to 0. Signed-off-by: NRoland Dreier <roland@topspin.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Libor Michalek 提交于
Add missing newline in printk. Signed-off-by: NLibor Michalek <libor@topspin.com> Signed-off-by: NRoland Dreier <roland@topspin.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Roland Dreier 提交于
Mask bits correctly from jhash result in ib_fmr_hash() so that the computed bucket index is within our hash table. This fixes an SDP crash. Signed-off-by: NRoland Dreier <roland@topspin.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Hal Rosenstock 提交于
Eliminate no longer needed include files Signed-off-by: NHal Rosenstock <halr@voltaire.com> Signed-off-by: NRoland Dreier <roland@topspin.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Sean Hefty 提交于
Replace the *wc field in ib_mad_recv_wc from pointing to a structure on the stack to one allocated with the received MAD buffer. This allows a client to access the *wc field after their receive completion handler has returned. Signed-off-by: NSean Hefty <sean.hefty@intel.com> Signed-off-by: NRoland Dreier <roland@topspin.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Roland Dreier 提交于
Update IPoIB documentation now that multicast debugging files have moved from ipoibdebugfs to debugfs. Signed-off-by: NRoland Dreier <roland@topspin.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Roland Dreier 提交于
Convert IPoIB to use debugfs instead of its own custom debugging filesystem. Signed-off-by: NRoland Dreier <roland@topspin.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Roland Dreier 提交于
Correct and simplify calculation of static rate. We need to round up the quotient of (local_rate - path_rate) / path_rate. To round up we add (path_rate - 1) to the numerator, so the quotient simplifies to (local_rate - 1) / path_rate. No idea how I came up with the old formula. Signed-off-by: NRoland Dreier <roland@topspin.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Hal Rosenstock 提交于
Set skb->mac.raw on receive. This fixes crashes when this is dereferenced, for example by netfilter or when PF_PACKET is used. Signed-off-by: NHal Rosenstock <halr@voltaire.com> Signed-off-by: NRoland Dreier <roland@topspin.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Horms 提交于
Use netdev as the mailing list contact instead of the mostly dead linux-net list. Signed-off-by: NHorms <horms@verge.net.au> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Russell King 提交于
Both the RiscPC and (optionally) EBSA285 have floppy disk support. Allow this option to be selected on these ARM platforms again. Signed-off-by: NRussell King <rmk@arm.linux.org.uk> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Coywolf Qi Hunt 提交于
This patch hides reparent_to_init(). reparent_to_init() should only be called by daemonize(). Signed-off-by: NCoywolf Qi Hunt <coywolf@lovecn.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Adrian Bunk 提交于
Both maintainer email addresses are bouncing and the web address is no longer valid. Seems to be a good time to remove the entry. Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Adrian Bunk 提交于
Compiling SOUND_AD1889 with PCI=n results in the following compile error: sound/built-in.o(.text+0x24f0c): In function `ad1889_remove': : undefined reference to `pci_release_region' This patch adds the missing dependency on PCI. Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Benoit Boissinot 提交于
gcc-4 warns with include/linux/cpuset.h:21: warning: type qualifiers ignored on function return type cpuset_cpus_allowed is declared with const extern const cpumask_t cpuset_cpus_allowed(const struct task_struct *p); First const should be __attribute__((const)), but the gcc manual explains that: "Note that a function that has pointer arguments and examines the data pointed to must not be declared const. Likewise, a function that calls a non-const function usually must not be const. It does not make sense for a const function to return void." The following patch remove const from the function declaration. Signed-off-by: NBenoit Boissinot <benoit.boissinot@ens-lyon.org> Acked-by: NPaul Jackson <pj@sgi.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Lennert Buytenhek 提交于
IXP2000 (ARM-based) platforms use a separate 'struct resource' for PCI MEM space. Resource allocation for PCI BARs always fails because the 'root' resource (the IXP2000 PCI MEM resource) always has the entire address space (00000000-ffffffff) free, and find_resource() calculates the size of that range as ffffffff-00000000+1=0, so all allocations fail because it thinks there is no space. (akpm: pls. double-check) Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Colin Leroy 提交于
Update Colin's credits entry. Signed-off-by: NColin Leroy <colin@colino.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Randy.Dunlap 提交于
Add a current 'dontdiff' file for use with 'diff -X dontdiff'. Signed-off-by: NRandy Dunlap <rddunlap@osdl.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Matt Mackall 提交于
Ted has agreed to let me take over as maintainer of /dev/random and friends. I've gone ahead and added a line to his entry in CREDITS. Signed-off-by: NMatt Mackall <mpm@selenic.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Magnus Damm 提交于
opl3sa2: Fix "irq"-parameter name typo for parameter description. Signed-off-by: NMagnus Damm <damm@opensource.se> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 James Bottomley 提交于
In the new io infrastructure, all of our operators are expecting the underlying device to be little endian (because the PCI bus, their main consumer, is LE). However, there are a fair few devices and busses in the world that are actually Big Endian. There's even evidence that some of these BE bus and chip types are attached to LE systems. Thus, there's a need for a BE equivalent of our io{read,write}{16,32} operations. The attached patch adds this as io{read,write}{16,32}be. When it's in, I'll add the first consume (the 53c700 SCSI chip driver). Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 maximilian attems 提交于
Randy please double check especially this one. there may be a better solution. Fix efi section references: remove __initdata for struct efi efi_phys and struct efi_memory_map memmap Error: ./arch/i386/kernel/efi.o .text refers to 000000d3 R_386_32 .init.data Error: ./arch/i386/kernel/efi.o .text refers to 000000ff R_386_32 .init.data efi_memmap_walk (which is not __init nor static) accesses both efi_phys and memmap. Signed-off-by: Nmaximilian attems <janitor@sternwelten.at> Acked-by: NRandy Dunlap <rddunlap@osdl.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 maximilian attems 提交于
Fix hd section references: make parse_hd_setup() __init Error: ./drivers/ide/legacy/hd.o .text refers to 00000943 R_386_PC32 .init.text Signed-off-by: Nmaximilian attems <janitor@sternwelten.at> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 maximilian attems 提交于
one of the last buildcheck errors on i386, thanks Randy again for double checking. Fix pnpbios section references: make dmi_system_id pnpbios_dmi_table __initdata Error: ./drivers/pnp/pnpbios/core.o .data refers to 00000100 R_386_32 .init.text Error: ./drivers/pnp/pnpbios/core.o .data refers to 0000012c R_386_32 .init.text Signed-off-by: Nmaximilian attems <janitor@sternwelten.at> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Paul E. McKenney 提交于
The hlist_for_each_entry_rcu() comment block refers to a nonexistent hlist_add_rcu() API, needs to change to hlist_add_head_rcu(). Signed-off-by: NPaul E. McKenney <paulmck@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-