- 21 10月, 2007 3 次提交
-
-
由 Milton Miller 提交于
Commit 9a39e273 removed the boot directory addition to CFLAGS that was being used by the subdirectory builds. For the other files, that patch set EXTRA_CFLAGS, but Makefile.build explicitly sets that to empty as it is explicitly for a single directory only. Append to KBUILD_CFLAGS instead. Signed-off-by: NMilton Miller <miltonm@bga.com> Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-
由 Randy Dunlap 提交于
Put kernel version info on title bar in xconfig (qconf) instead of defaulting to "qconf". Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-
由 David Brownell 提交于
This removes a syntax error (seen building on Ubuntu Feisty). Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-
- 20 10月, 2007 37 次提交
-
-
由 Linus Torvalds 提交于
This reverts commit a5bf3d89. David Brownell notes that this causes a regression visible in the drivers/usb/gadget Kconfig file: "That Kconfig hasn't changed (other than adding new drivers), and it's worked that way for several years now ... so the issue seems to be changes in menuconfig/kconfig/etc semantics. The issue is that when USB_GADGET=m, it's no longer possible to configure peripheral controller drivers as modules ... the controller drivers can now only be configured for static linkage. It should be making a choice of one of the controller drivers which could work on the target system, and allow that driver to be linked either as a module (ok iff USB_GADGET=m) or statically." Reverting this commit resolves the problem, and also fixes a second problem that David noticed: various dependent options couldn't be enabled. Tested-and-reported-by: NDavid Brownell <david-b@pacbell.net> Cc: Randy Dunlap <rdunlap@xenotime.net> Cc: Jan Beulich <jbeulich@novell.com>, Cc: Andrew Morton <akpm@linux-foundation.org>, Cc: Sam Ravnborg <sam@ravnborg.org>, Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial: (74 commits) fix do_sys_open() prototype sysfs: trivial: fix sysfs_create_file kerneldoc spelling mistake Documentation: Fix typo in SubmitChecklist. Typo: depricated -> deprecated Add missing profile=kvm option to Documentation/kernel-parameters.txt fix typo about TBI in e1000 comment proc.txt: Add /proc/stat field small documentation fixes Fix compiler warning in smount example program from sharedsubtree.txt docs/sysfs: add missing word to sysfs attribute explanation documentation/ext3: grammar fixes Documentation/java.txt: typo and grammar fixes Documentation/filesystems/vfs.txt: typo fix include/asm-*/system.h: remove unused set_rmb(), set_wmb() macros trivial copy_data_pages() tidy up Fix typo in arch/x86/kernel/tsc_32.c file link fix for Pegasus USB net driver help remove unused return within void return function Typo fixes retrun -> return x86 hpet.h: remove broken links ...
-
由 Linus Torvalds 提交于
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: (21 commits) Fix build break in tsi108.c qeth: remove header_ops bug ir-functions.c:(.text+0xbce18): undefined reference to `input_event' NAPI: kconfig prompt and deleted doc file phy/bitbang: missing MODULE_LICENSE DM9000 initialization fix [PATCH] rt2x00: Add new rt73usb USB ID [PATCH] rt2x00: Fix residual check in PLCP calculations. [PATCH] iwlwifi: Fix rate setting in probe request for HW sacn [PATCH] b43: Make b43_stop() static [PATCH] drivers/net/wireless/b43/main.c: fix an uninitialized variable [PATCH] iwlwifi: set correct base rate for A band in rs_dbgfs_set_mcs [PATCH] zd1211rw, fix oops when ejecting install media [PATCH] b43legacy: Fix potential return of uninitialized variable [PATCH] iwl4965-base.c: fix off-by-one errors [PATCH] p54: Make filter configuration atomic [PATCH] rtl8187: remove NICMAC setting in configure_filters callback [PATCH] janitorial: fix all double includes in drivers/net/wireless [PATCH] rtl8187: Fix more frag bit checking, rts duration calc [PATCH] ipw2100: send WEXT scan events ...
-
由 Linus Torvalds 提交于
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev: [libata] sata_sis: use correct S/G table size pata_cs5536: MWDMA fix sata_sis: fix SCR read breakage libata: fix kernel-doc param name
-
由 Jeff Garzik 提交于
Merge branch 'fixes-jgarzik' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into upstream
-
由 Olof Johansson 提交于
Fix build break: drivers/net/tsi108_eth.c: In function 'tsi108_init_one': drivers/net/tsi108_eth.c:1633: error: expected ')' before 'dev' drivers/net/tsi108_eth.c:1633: warning: too few arguments for format make[2]: *** [drivers/net/tsi108_eth.o] Error 1 Signed-off-by: NOlof Johansson <olof@lixom.net> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Ursula Braun 提交于
Remove qeth bug caused by commit: [NET]: Move hardware header operations out of netdevice. Signed-off-by: NUrsula Braun <braunu@de.ibm.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Randy Dunlap 提交于
[bugme-daemon@bugzilla.kernel.org wrote:] From: Randy Dunlap <randy.dunlap@oracle.com> Drivers that use lro functions should depend on INET, otherwise they may not link correctly. Let's not select INET. Select should be used only for library-like code, not to enable subsystems. ERROR: "lro_flush_all" [drivers/net/myri10ge/myri10ge.ko] undefined! ERROR: "lro_receive_frags" [drivers/net/myri10ge/myri10ge.ko] undefined! Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Randy Dunlap 提交于
- make the kconfig NAPI option prompt consistent across all net drivers (other than EXPERIMENTAL; can it now be removed also, or is the new napi_struct implementation now EXPERIMENTAL ?) - remove comment about the now-deleted NAPI_HOWTO.txt file - clean up typos in Tulip NAPI & Interrupt Mitigation Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Randy Dunlap 提交于
Missing MODULE_LICENSE(), loading this module taints the kernel. Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Mike Rapoport 提交于
DM9000 driver returns success even if it is failed to detect the chip. Below patch fixes it. Signed-off-by: NMike Rapoport <mike@compulab.co.il> drivers/net/dm9000.c | 6 +++--- 1 files changed, 3 insertions(+), 3 deletions(-) Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Linus Torvalds 提交于
Erez Zadok reports that certain configurations fail to build due to schedule() TASK_[UN]INTERRUPTIBLE not being declared. Add proper include files to fix. Cc: Erez Zadok <ezk@cs.sunysb.edu> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jeff Garzik 提交于
sata_sis has the same restrictions as other SFF controllers, and so must use LIBATA_MAX_PRD to denote that SCSI may only fill ATA_MAX_PRD/2 entries, due to our need to handle IOMMU merging. Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
* Fix out-of-bound array access for MWDMA modes. * Bump driver version. Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Tejun Heo 提交于
SCR read for controllers which uses PCI configuration space for SCR access got broken while adding @val argument to SCR accessors. Fix it. Signed-off-by: NTejun Heo <htejun@gmail.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Randy Dunlap 提交于
Fix libata kernel-doc parameter name. Warning(linux-2.6.23-git13//drivers/ata/libata-core.c:1415): No description found for parameter 'sgl' Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Linus Torvalds 提交于
* master.kernel.org:/pub/scm/linux/kernel/git/bart/ide-2.6: (50 commits) ide: remove inclusion of non-existent io_trace.h ide-disk: add get_smart_data() helper ide: fix ->data_phase in taskfile_load_raw() ide: check drive->using_dma in flagged_taskfile() ide: check ->dma_setup() return value in flagged_taskfile() dtc2278: note on docs qd65xx: remove pointless qd_{read,write}_reg() (take 2) ide: PCI BMDMA initialization fixes (take 2) ide: remove stale comments from ide-taskfile.c ide: remove dead code from ide_driveid_update() ide: use __ide_end_request() in ide_end_dequeued_request() ide: enhance ide_setup_pci_noise() cs5530: remove needless ide_lock taking ide: take ide_lock for prefetch disable/enable in do_special() ht6560b: fix deadlock on error handling cmd640: fix deadlock on error handling slc90e66: fix deadlock on error handling opti621: fix deadlock on error handling qd65xx: fix deadlock on error handling dtc2278: fix deadlock on error handling ...
-
由 Olof Johansson 提交于
Signed-off-by: NOlof Johansson <olof@lixom.net> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
* master.kernel.org:/pub/scm/linux/kernel/git/agk/linux-2.6-dm: (29 commits) dm crypt: tidy pending dm mpath: send uevents dm: uevent generate events dm: add uevent to core dm: export name and uuid dm raid1: add mirror_set to struct mirror dm log: split suspend dm mpath: hp retry if not ready dm mpath: add hp handler dm mpath: add retry pg init dm crypt: tidy labels dm crypt: tidy whitespace dm crypt: add post processing queue dm crypt: use per device singlethread workqueues dm mpath: emc fix an error message dm: bio_list macro renaming dm io:ctl remove vmalloc void cast dm: tidy bio_io_error usage kcopyd use mutex instead of semaphore dm: use kzalloc ...
-
由 Jason Uhlenkott 提交于
Fix an argument name in do_sys_open()'s prototype. Signed-off-by: NJason Uhlenkott <juhlenko@akamai.com> Signed-off-by: NAdrian Bunk <bunk@kernel.org>
-
由 Chris Malley 提交于
Spelling error in sysfs_create_file kerneldoc. Signed-off-by: NChris Malley <mail@chrismalley.co.uk> Signed-off-by: NAdrian Bunk <bunk@kernel.org>
-
由 James Bowes 提交于
Signed-off-by: NJames Bowes <jbowes@dangerouslyinc.com> Signed-off-by: NAdrian Bunk <bunk@kernel.org>
-
由 Rolf Eike Beer 提交于
Typo: depricated -> deprecated Signed-off-by: NRolf Eike Beer <eike-kernel@sf-tec.de> Signed-off-by: NAdrian Bunk <bunk@kernel.org>
-
由 Dave Jones 提交于
Whilst looking up what profile=sleep did, I noticed that we missed adding docs for the most recent addition to the profiler. Signed-off-by: NDave Jones <davej@redhat.com> Acked-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NAdrian Bunk <bunk@kernel.org>
-
由 Masatake YAMATO 提交于
Signed-off-by: NMasatake YAMATO <jet@gyve.org> Signed-off-by: NAdrian Bunk <bunk@kernel.org>
-
由 Eric W. Biederman 提交于
Weird I thought I had written the makefile so this would be handled. Oh well this should fix it. Sorry about that. Signed-off-by: NEric W. Biederman <ebiederm@xmission.com> Acked-and-tested-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Leonardo Chiquitto 提交于
This patch updates the "cat /proc/stat" output found in Documentation/filesystems/proc.txt. Signed-off-by: NAdrian Bunk <bunk@kernel.org>
-
由 Milan Broz 提交于
Add crypt prefix to dec_pending to avoid confusing it in backtraces with the dm core function of the same name. No functional change here. Signed-off-by: NMilan Broz <mbroz@redhat.com> Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
-
由 Mike Anderson 提交于
This patch adds calls to dm_path_event for a failed path and a reinstated path. Signed-off-by: NMike Anderson <andmike@linux.vnet.ibm.com> Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
-
由 Mike Anderson 提交于
This patch adds support for the dm_path_event dm_send_event functions which create and send udev events. Signed-off-by: NMike Anderson <andmike@linux.vnet.ibm.com> Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
-
由 Mike Anderson 提交于
This patch adds a uevent skeleton to device-mapper. Signed-off-by: NMike Anderson <andmike@linux.vnet.ibm.com> Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
-
由 Mike Anderson 提交于
This patch adds a function to obtain a copy of a mapped device's name and uuid. Signed-off-by: NMike Anderson <andmike@linux.vnet.ibm.com> Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
-
由 Jonathan Brassow 提交于
Store a pointer to the owning mirror_set structure within each mirror structure for a subsequent patch to use. Signed-off-by: NJonathan Brassow <jbrassow@redhat.com> Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
-
由 Jonathan Brassow 提交于
There are now two phases to a suspend in device-mapper - presuspend and postsuspend. This patch removes the single 'suspend' in the logging API and replaces it with 'presuspend' and 'postsuspend' functions to align it better with core device-mapper. A subsequent patch will make use of 'presuspend'. Signed-off-by: NJonathan Brassow <jbrassow@redhat.com> Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
-
由 Dave Wysochanski 提交于
This patch adds retries to the hp hardware handler, and utilizes the MP_RETRY flag of dm-multipath. For now in the hp handler, if we get a pg_init completed with a check condition we just assume we can retry the pg_init command. We make this assumption because of incomplete data on specific check condition code of the HP hardware, and because testing has shown the HP path initialization command to be idempotent. The number of times we retry is settable via the "pg_init_retries" multipath map feature. Signed-off-by: NDave Wysochanski <dwysocha@redhat.com> Acked-by: NChandra Seetharaman <sekharan@us.ibm.com> Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
-
由 Dave Wysochanski 提交于
This patch adds the most basic dm-multipath hardware support for the HP active/passive arrays. Signed-off-by: NDave Wysochanski <dwysocha@redhat.com> Signed-off-by: NMike Christie <michaelc@cs.wisc.edu> Acked-by: NChandra Seetharaman <sekharan@us.ibm.com> Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
-
由 Dave Wysochanski 提交于
This patch allows a failed path group initialisation command to be retried. It adds a generic MP_RETRY flag and a "pg_init_retries" feature to device-mapper multipath which limits the number of retries. 1. A hw handler sends a path initialization command to the storage and the command completes with an error code indicating the command should be retried. 2. The hardware handler calls dm_pg_init_complete() with MP_RETRY set in err_flags to ask the dm multipath core to retry. 3. If the retry limit has not been exceeded, pg_init() is retried. Otherwise fail_path() is called. If you are using the userspace multipath-tools or device-mapper-multipath package, you can set pg_init_retries in the 'device' section of your /etc/multipath.conf file. For example: features "2 pg_init_retries 7" The number of PG retries attempted is reported in the 'dmsetup status' output. Signed-off-by: NDave Wysochanski <dwysocha@redhat.com> Acked-by: NMike Christie <michaelc@cs.wisc.edu> Acked-by: NChandra Seetharaman <sekharan@us.ibm.com> Signed-off-by: NAlasdair G Kergon <agk@redhat.com>
-