Patch from Malcolm Parsons

Printking a backtrace requires printk, so disable backtrace code
when printk is disabled.

Without this patch, a kernel with CONFIG_PRINTK disabled does not link:

arch/arm/lib/lib.a(backtrace.o): In function `c_backtrace':
arch/arm/lib/backtrace.S:(.text+0x108): undefined reference to `printk'
arch/arm/lib/backtrace.S:(.text+0x11c): undefined reference to `printk'
arch/arm/lib/lib.a(backtrace.o):(.fixup+0x8): undefined reference to `printk'
Signed-off-by: NMalcolm Parsons <malcolm.parsons@gmail.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Catalin Marinas

The current VFP code corrupts the VFP registers (including the control
ones) if more than one floating point application is executed at the same
time. This patch fixes the updating of the load/store base addresses for
the VFP registers.
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Andrew Victor

This patch updates the hardware header to include definitions for the
Memory Controller registers.
Signed-off-by: NAndrew Victor <andrew@sanpeople.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Pavel Machek

This adds support for battery reading on collie. Collie slowly charges
battery even with charging disabled, so I did not yet enable fast
charge.
Signed-off-by: NPavel Machek <pavel@suse.cz>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

The recent addition of boot_cpu_init() implements the initialisation
of the online, present and possible cpu maps for the boot CPU, so
there is no reason to duplicate this in the architecture
smp_prepare_boot_cpu() hook.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

include/linux/clk.h is betraying its ARM origins.
Signed-off-by: NTodd Poynor <tpoynor@mvista.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

5d25ac03 broke VFP builds due to
enable_irq not being defined as an assembly macro.  Move it to
assembler.h so everyone can use it.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Patch from Lennert Buytenhek

This patch changes iop3xx and omap2 and to use PLAT8250_DEV_PLATFORM{,1}
as platform device id instead of just hardcoding 0/1 directly.
Signed-off-by: NLennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

* git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (78 commits)
  [PATCH] powerpc: Add FSL SEC node to documentation
  [PATCH] macintosh: tidy-up driver_register() return values
  [PATCH] powerpc: tidy-up of_register_driver()/driver_register() return values
  [PATCH] powerpc: via-pmu warning fix
  [PATCH] macintosh: cleanup the use of i2c headers
  [PATCH] powerpc: dont allow old RTC to be selected
  [PATCH] powerpc: make powerbook_sleep_grackle static
  [PATCH] powerpc: Fix warning in add_memory
  [PATCH] powerpc: update mailing list addresses
  [PATCH] powerpc: Remove calculation of io hole
  [PATCH] powerpc: iseries: Add bootargs to /chosen
  [PATCH] powerpc: iseries: Add /system-id, /model and /compatible
  [PATCH] powerpc: Add strne2a() to convert a string from EBCDIC to ASCII
  [PATCH] powerpc: iseries: Make more stuff static in platforms/iseries/mf.c
  [PATCH] powerpc: iseries: Remove pointless iSeries_(restart|power_off|halt)
  [PATCH] powerpc: iseries: mf related cleanups
  [PATCH] powerpc: Replace platform_is_lpar() with a firmware feature
  [PATCH] powerpc: trivial: Cleanup whitespace in cputable.h
  [PATCH] powerpc: Remove unused iommu_off logic from pSeries_init_early()
  [PATCH] powerpc: Unconfuse htab_bolt_mapping() callers
  ...

Documentation: Added FSL SOC SEC node definition

Updated the documentation to include the definition of the SEC device
node format for Freescale SOC devices.
Signed-off-by: NKim Phillips <kim.phillips@freescale.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Remove the assumption that driver_register() returns the number of devices
bound to the driver.  In fact, it returns zero for success or a negative
error value.

All callers of macio_register_driver() either ignore the return value or
return it as the return value of a module_init() function.
Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Remove the assumption that driver_register() returns the number of devices
bound to the driver.  In fact, it returns zero for success or a negative
error value.

Nobody uses the return value of of_register_driver() anyway.
Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com>
Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

drivers/macintosh/via-pmu.c:164: warning: `sleep_in_progress' defined but not used

Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Cleanup the use of i2c headers in macintosh drivers.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Now powerpc uses the generic RTC stuff we should not enable the old RTC.
Doing so will result in hangs at boot.
Signed-off-by: NAnton Blanchard <anton@samba.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

powerbook_sleep_grackle is only called inside via-pmu, from pmu_ioctl()
Signed-off-by: NOlaf Hering <olh@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

arch/powerpc/mm/mem.c: In function `add_memory':
arch/powerpc/mm/mem.c:128: warning: assignment makes integer from pointer without a cast

Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6:
  [PATCH] Use of uninitialized variable in drivers/net/depca.c
  [PATCH] Use after free in net/tulip/de2104x.c
  [PATCH] sis900 adm7001 PHY support
  [PATCH] sky2: more ethtool stats
  [PATCH] s390: qeth :allow setting of attribute "route6" to "no_router".
  [PATCH] s390: qeth driver cleanups
  [PATCH] s390: qeth driver statistics fixes
  [PATCH] AMD Au1xx0: fix Ethernet TX stats
  [PATCH] fix spidernet build issue

If the debug driver is built-in, link it in last, so that any real
drivers will probe first, rather than having the debug driver pick the
first scsi slots..
Signed-off-by: NDouglas Gilbert <dougg@torque.net>
Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net>
Acked-by: NJames Bottomley <James.Bottomley@SteelEye.com>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6:
  [TCP]: Do not use inet->id of global tcp_socket when sending RST.
  [NETFILTER]: Fix undefined references to get_h225_addr
  [NETFILTER]: futher {ip,ip6,arp}_tables unification
  [NETFILTER]: Fix xt_policy address matching
  [NETFILTER]: nf_conntrack: support for layer 3 protocol load on demand
  [NETFILTER]: x_tables: set the protocol family in x_tables targets/matches
  [NETFILTER]: conntrack: cleanup the conntrack ID initialization
  [NETFILTER]: nfnetlink_queue: fix nfnetlink message size
  [NETFILTER]: ctnetlink: Fix expectaction mask dumping
  [NETFILTER]: Fix Kconfig typos
  [NETFILTER]: Fix ip6tables breakage from {get,set}sockopt compat layer

* master.kernel.org:/home/rmk/linux-2.6-serial:
  [SERIAL] Merge avlab serial board entries in parport_serial
  [SERIAL] kernel console should send CRLF not LFCR

* master.kernel.org:/home/rmk/linux-2.6-arm: (45 commits)
  [ARM] 3389/1: typo and grammar fix
  [ARM] 3386/1: AT91RM9200 Clock update
  [ARM] 3384/1: AT91RM9200: Timer
  [ARM] 3382/1: ixp2000: unify defconfigs
  [ARM] 3381/1: ixp2000: fix slowport write timing control register fields
  [ARM] 3380/1: ixp2000: simplify ixdp2x00_master_npu() check
  [ARM] 3379/1: ixp2000: use generic 8250 debug macros
  [ARM] 3378/1: ixp2000: fix gpio interrupt handling
  [ARM] Quieten spurious IRQ detection
  [ARM] Use kcalloc to allocate counter_config array rather than kmalloc
  [ARM] Oprofile: dynamically allocate counter_config
  [ARM] Oprofile: Convert semaphore to mutex
  [ARM] 3376/2: S3C2410 - update defconfig
  [ARM] 3375/1: S3C2440 - fix osiris machine build
  [ARM] 3374/1: ep93xx: gpio interrupt support
  [ARM] 3361/1: S3C24XX - add USB bus clock source
  [ARM] 3360/1: S3C2440 - add set rate methods and camera clock
  [ARM] 3359/1: S3C24XX - add support for clk_set_rate
  [ARM] Convert kmalloc+memset to kzalloc
  [ARM] 3373/1: move uengine loader to arch/arm/common
  ...

hi,

this fixes coverity bug #888, where the variable
dev is used uninitialized. I assume the programmer
meant to use mdev, which is initialized.
Compile tested only.
Signed-off-by: NEric Sesterhenn <snakebyte@gmx.de>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

hi,

this fixes coverity bug #912, where skb is freed first,
and dereferenced a few lines later with skb->len.
Signed-off-by: NEric Sesterhenn <snakebyte@gmx.de>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

this patch is required to get a SIS964 based motherboard ethernet working (FSC D1875)
(picking the #1 transceiver, instead of the last one, in case no known ones were found
might be a better default, and would have worked in this case too)
Signed-off-by: NArtur Skawina <art_k@o2.pl>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Expose all the available hardware statistics via ethtool.
And cleanup some of the statistics definitions.
Signed-off-by: NStephen Hemminger <shemminger@osdl.org>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

[patch 4/6] s390: qeth :allow setting of attribute "route6" to "no_router".

From: Ursula Braun <braunu@de.ibm.com>
	when setting route6 attribute back to no_router qeth does not
	issue an IP ASSIST command to reset router value to no_router.
	Once primary_router is set device stays in this mode.
	Issue an IP ASSIST command when no_router is set in route6.
	Device will be reset and thus will not longer run as a primary
	router.
Signed-off-by: NFrank Pavlic <fpavlic@de.ibm.com>

diffstat:
 qeth_main.c |    5 -----
 1 files changed, 5 deletions(-)
Signed-off-by: NJeff Garzik <jeff@garzik.org>

[patch 3/6] s390: qeth driver cleanups

From: Ursula Braun <braunu@de.ibm.com>
	- code analyzing tool BEAM has found some unreachable
	  and unnecessary statements and also conditions
	  which are always true.
	- removed some useless MII code since OSA card will never
	  allow to set such values.
Signed-off-by: NFrank Pavlic <fpavlic@de.ibm.com>

diffstat:
 qeth_main.c |   49 ++++---------------------------------------------
 qeth_proc.c |   18 +++++++++---------
 qeth_sys.c  |    2 +-
 3 files changed, 14 insertions(+), 55 deletions(-)
Signed-off-by: NJeff Garzik <jeff@garzik.org>

[patch 2/6] s390: qeth driver statistics fixes

From: Ursula Braun <braunu@de.ibm.com>
	- display "unsigned int" values in /proc/qeth_perf with %u instead of %i
	- omit qdio header length when increasing card->stats.tx_bytes
Signed-off-by: NFrank Pavlic <fpavlic@de.ibm.com>

diffstat:
qeth_main.c |    3 ++-
 qeth_proc.c |   38 +++++++++++++++++++-------------------
 2 files changed, 21 insertions(+), 20 deletions(-)
Signed-off-by: NJeff Garzik <jeff@garzik.org>

With Au1xx0 Ethernet driver, TX bytes/packets always remain zero.  The
problem seems to be that when packet has been transmitted, the length word
in DMA buffer is zero.

The patch updates the TX stats when a buffer is fed to DMA.  The initial
2.4 patch was posted to linux-mips@linux-mips.org by Thomas Lange 21 Jan
2005.
Signed-off-by: NThomas Lange <thomas@corelatus.se>
Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Jordan Crouse <jordan.crouse@amd.com>
Cc: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

<unchangelogged>
Signed-off-by: NJens Osterkamp <Jens.Osterkamp@de.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Now that libata is smart enought to handle both soft and hard resets,
add softreset method.
Signed-off-by: NTejun Heo <htejun@gmail.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

As libata now can do PIO, don't ignore PIO-only devices.
Signed-off-by: NTejun Heo <htejun@gmail.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Not much to say here except that some drives have fixed and bad firmware
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

The current code follows the spec but uses an overlong delay. This would
be great if the hardware did. Several vendors however forget the D7
pulldown. Fortunately 0xFF isnt a sane reset state so we can use it to
skip detection as is done in drivers/ide. (ie this is a tested solution
over a long time)
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

The problem is in ip_push_pending_frames(), which uses:

        if (!df) {
                __ip_select_ident(iph, &rt->u.dst, 0);
        } else {
                iph->id = htons(inet->id++);
        }

instead of ip_select_ident().

Right now I think the code is a nonsense. Most likely, I copied it from
old ip_build_xmit(), where it was really special, we had to decide
whether to generate unique ID when generating the first (well, the last)
fragment.

In ip_push_pending_frames() it does not make sense, it should use plain
ip_select_ident() instead.
Signed-off-by: NAlexey Kuznetsov <kuznet@ms2.inr.ac.ru>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

get_h225_addr is exported, but declared static, which fails when
linking statically.
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>