- 16 10月, 2007 40 次提交
-
-
由 Jeff Garzik 提交于
This driver was using hooks that were very recently removed. Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Jeremy Katz 提交于
There are standard keycodes for brightness and volume; map the events to emit them so that things work properly Signed-off-by: NJeremy Katz <katzj@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jeremy Fitzhardinge 提交于
Keep tx and rx elements separate on different cachelines to prevent bouncing. Signed-off-by: NJeremy Fitzhardinge <jeremy@xensource.com> Acked-by: NJeff Garzik <jgarzik@pobox.com> Cc: Stephen Hemminger <shemminger@linux-foundation.org> Cc: Christoph Hellwig <hch@infradead.org> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Geert Uytterhoeven 提交于
Atari keyboard: incorporate additional review comments: o Kill reference to source file name o Return error value from input_register_device() instead of -ENOMEM Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Michael Schmitz <schmitz@biophys.uni-duesseldorf.de> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alejandro Martinez Ruiz 提交于
This will convert remaining non-obvious or naive calculations of array sizes to use ARRAY_SIZE() macro. Signed-off-by: NAlejandro Martinez Ruiz <alex@flawedcode.org> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Pavel Emelyanov 提交于
When the loopback device is failed to initialize inside the new namespaces, panic() is called. Do not do it when the namespace in question is not the init_net. Plus cleanup the error path a bit. Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Linus Torvalds 提交于
Commit 90833fda ("[ARM] 4554/1: replace consistent_sync() with flush_ioremap_region()") introduced a new "flush_ioremap_region()" function to be used by the MTD mainstone-flash and lubbock-flash drivers to fix a regression from around 2.6.18. Those drivers were independently merged into a single driver by Todd Poynor in commit e644f7d6 ("[MTD] MAPS: Merge Lubbock and Mainstone drivers into common PXA2xx driver") Later, those two commits were merged into the main MTD tree by commit b160292c ("Merge Linux 2.6.23") by David Woodhouse, but in that merge, the fix to use flush_iomap_region() got lost (as it was to files that now no longer existed). This reinstates the fix in the new driver. Noticed-by: NRussell King <rmk@arm.linux.org.uk> Tested-and-acked-by: NNicolas Pitre <nico@cam.org> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Jared Hulbert <jaredeh@gmail.com> Cc: Todd Poynor <tpoynor@mvista.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Denis V. Lunev 提交于
On Mon, Oct 15, 2007 at 06:44:56PM +0400, Denis V. Lunev wrote: Compilation fix. The problem appears after 7c076d1de869256848dacb8de0050a3a390f95df by Karsten Keil <kkeil@suse.de> Acked-by: NKarsten Keil <kkeil@suse.de> Signed-off-by: NDenis V. Lunev <den@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Kristoffer Ericson 提交于
Signed-off-by: NKristoffer Ericson <kristoffer.ericson@gmail.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Linus Torvalds 提交于
If the gdth module is loaded (or compiled in), the gdth_timeout function gets started even if no actual gdth controllers are found b the probing. That ends up not only being unnecessary, but also causes a crash due to the function blindly just trying to pick the first entry off the "gdth_instances" list, and accessing it - which obviously doesn't work if the list is empty! Noticed by Ingo Molnar. Tested-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andrew Paprocki 提交于
The strn_pattern_cmp routine does not handle a blank name parameter properly. The only patterns which should match a blank name are "*" and an explicit "". If the function is passed a blank name in current code, it will always match against the patt parameter. The bug manifests itself as the device with the empty model name always matching the first device in the DMA blacklist, forcing it to revert to PIO mode. Signed-off-by: NAndrew Paprocki <andrew@ishiboo.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Jason Gaston 提交于
This patch adds a port map for ICH9 and ICH8 SATA controllers that have only 2 ports available in that mode. Signed-off-by: NJason Gaston <jason.d.gaston@intel.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Martin K. Petersen 提交于
This is a driver for the ATA controller on the Geode CS5536 companion chip. The PCI device ID for this device was previously claimed by pata_amd.c but the PIO timings were not correct. This driver also works around a bug in some BIOSes that handle unaligned access to the PCI config registers poorly. Finally, the driver allows fallback to using MSR registers for configuration on BIOSes that are truly broken. Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Michael Chan 提交于
A performance regression was introduced by the following commit: commit ee6a99b5 Author: Michael Chan <mchan@broadcom.com> Date: Wed Jul 18 21:49:10 2007 -0700 [TG3]: Fix msi issue with kexec/kdump. In making that change, the PCI latency timer and cache line size registers were not restored after chip reset. On the 5705, the latency timer gets reset to 0 during chip reset and this causes very poor performance. Update version to 3.84. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Karsten Keil 提交于
Signed-off-by: NKarsten Keil <kkeil@suse.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Al Viro 提交于
By the time we get to that switch by PHY type, we have 8bit value. No need to keep it in u64 when u8 would do. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Noticed by Coverity checker and reported by Adrian Bunk. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tejun Heo 提交于
ST9160821AS / 3.CCD does spurious completions too. Blacklist it. Signed-off-by: NTejun Heo <htejun@gmail.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Tejun Heo 提交于
After commands which can change device configuration, EH is scheduled to revalidate and reconfigure the device. Host link was incorrectly used unconditionally when scheduling EH action. This resulted in bogus revalidation request and mismatched configuration between device and driver. Fix it. This bug was reported by Igor Durdanovic. Signed-off-by: NTejun Heo <htejun@gmail.com> Cc: Igor Durdanovic <idurdanovic@comcast.net> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Kuan Luo 提交于
Add the Software NCQ support to sata_nv.c for MCP51/MCP55/MCP61 SATA controller. NCQ function is disable by default, you can enable it with 'swncq=1'. NCQ will be turned off if the drive is Maxtor on MCP51 or MCP55 rev 0xa2 platform. [akpm@linux-foundation.org: build fix] Signed-off-by: NKuan Luo <kluo@nvidia.com> Signed-off-by: NPeer Chen <pchen@nvidia.com> Cc: Zoltan Boszormenyi <zboszor@dunaweb.hu> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Benjamin Herrenschmidt 提交于
This patch adds MMIO support to the pata_sil680 for taskfile IOs, based on what the old siimage does. I haven't bothered changing the chip setup stuff from PCI config cycles to MMIO though (siimage does it), I don't think it matters, I've only adapted it to use MMIO for taskfile accesses. I've tested it on a Cell blade and it seems to work fine. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Emil Medve 提交于
drivers/net/ucc_geth.c: In function 'ucc_geth_rx': drivers/net/ucc_geth.c:3483: error: 'dev' undeclared (first use in this function) drivers/net/ucc_geth.c:3483: error: (Each undeclared identifier is reported only once drivers/net/ucc_geth.c:3483: error: for each function it appears in.) make[2]: *** [drivers/net/ucc_geth.o] Error 1 Signed-off-by: NEmil Medve <Emilian.Medve@Freescale.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Li Yang 提交于
Protect all new napi function calls with CONFIG_GFAR_NAPI. Otherwise the driver will stop working when CONFIG_GFAR_NAPI disabled. Signed-off-by: NLi Yang <leoli@freescale.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Li Yang 提交于
Signed-off-by: NLi Yang <leoli@freescale.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Li Yang 提交于
Signed-off-by: NLi Yang <leoli@freescale.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Yoichi Yuasa 提交于
Add new prom.h for AU1x00. Signed-off-by: NYoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Acked-by: NRalf Baechle <ralf@linux-mips.org> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Yoichi Yuasa 提交于
Update AU1000 get_ethernet_addr(). Three functions were brought together in one. Signed-off-by: NYoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Acked-by: NRalf Baechle <ralf@linux-mips.org> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Ralf Baechle 提交于
General cleanups mostly as suggested by checkpatch plus getting rid of homebrew version of offsetof(). Signed-off-by: NRalf Baechle <ralf@linux-mips.org> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Ralf Baechle 提交于
Caused by "[NET]: Introduce and use print_mac() and DECLARE_MAC_BUF()" aka 0795af57. Signed-off-by: NRalf Baechle <ralf@linux-mips.org> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Michael Ellerman 提交于
With the base stored in dcr_host_t, there's no need for callers to pass the dcr_n into dcr_unmap(). In fact this removes the possibility of them passing the incorrect value, which would then be iounmap()'ed. Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Michael Ellerman 提交于
Now that all users of dcr_read()/dcr_write() add the dcr_host_t.base, we can save them the trouble and do it in dcr_read()/dcr_write(). As some background to why we just went through all this jiggery-pokery, benh sayeth: Initially the goal of the dcr_read/dcr_write routines was to operate like mfdcr/mtdcr which take absolute DCR numbers. The reason is that on 4xx hardware, indirect DCR access is a pain (goes through a table of instructions) and it's useful to have the compiler resolve an absolute DCR inline. We decided that wasn't worth the API bastardisation since most places where absolute DCR values are used are low level 4xx-only code which may as well continue using mfdcr/mtdcr, while the new API is designed for device "instances" that can exist on 4xx and Axon type platforms and may be located at variable DCR offsets. Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Michael Ellerman 提交于
This requires us to do a sort-of fake dcr_map(), so that base is set properly. This will be fixed/removed when the device-tree-aware emac driver is merged. Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Michael Ellerman 提交于
Now that dcr_host_t contains the base address, we can use that in the ibm_newemac code, rather than storing it separately. Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Florin Malita 提交于
If pci_enable_device fails, bdx_probe returns without freeing the allocated pci_nic structure. Coverity CID 1908. Signed-off-by: NFlorin Malita <fmalita@gmail.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Ralf Baechle 提交于
bea3348e broke the build of tc35815.c for the non-NAPI case: CC drivers/net/tc35815.o drivers/net/tc35815.c: In function 'tc35815_interrupt': drivers/net/tc35815.c:1464: error: redefinition of 'lp' drivers/net/tc35815.c:1443: error: previous definition of 'lp' was here Signed-off-by: NRalf Baechle <ralf@linux-mips.org> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Ralf Baechle 提交于
Fix build breakage by the recent statistics cleanup in cset 09f75cd7. Signed-off-by: NRalf Baechle <ralf@linux-mips.org> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Matteo Croce 提交于
New version which uses less locking and drops old API Signed-off-by: NMatteo Croce <technoboy85@gmail.com> Signed-off-by: NEugene Konev <ejka@imfi.kspu.ru> Signed-off-by: NFelix Fietkau <nbd@openwrt.org> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Brice Goglin 提交于
The myri10ge driver is now at version 1.3.2-1.287. Signed-off-by: NBrice Goglin <brice@myri.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Brice Goglin 提交于
Add support for IPv6 TSO to the myri10ge driver. Signed-off-by: NBrice Goglin <brice@myri.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Brice Goglin 提交于
Update myri10ge firmware headers to latest upstream version with TSO6 and RSS support. Signed-off-by: NBrice Goglin <brice@myri.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-