- 24 6月, 2009 4 次提交
-
-
由 Jaswinder Singh Rajput 提交于
Remove dead code and do some code alignment. Signed-off-by: NJaswinder Singh Rajput <jaswinderrajput@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <1245847774.2681.2.camel@ht.satnam> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Yong Wang 提交于
Previous code made an assumption that the power on value of global control MSR has enabled all fixed and general purpose counters properly. However, this is not the case for certain Intel processors, such as Atom - and it might also be firmware dependent. Each enable bit in IA32_PERF_GLOBAL_CTRL is AND'ed with the enable bits for all privilege levels in the respective IA32_PERFEVTSELx or IA32_PERF_FIXED_CTR_CTRL MSRs to start/stop the counting of respective counters. Counting is enabled if the AND'ed results is true; counting is disabled when the result is false. The end result is that all fixed counters are always disabled on Atom processors because the assumption is just invalid. Fix this by not initializing the ctrl-mask out of the global MSR, but setting it to perf_counter_mask. Reported-by: NStephane Eranian <eranian@googlemail.com> Signed-off-by: NYong Wang <yong.y.wang@intel.com> Cc: Arjan van de Ven <arjan@infradead.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <20090624021324.GA2788@ywang-moblin2.bj.intel.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Roel Kluin 提交于
size_t res cannot be less than 0 - fread returns 0 on error. [ Updated by: René Scharfe <rene.scharfe@lsrfire.ath.cx> ] Reported-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NRoel Kluin <roel.kluin@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Junio C Hamano <gitster@pobox.com> LKML-Reference: <4A3FB479.2090902@lsrfire.ath.cx> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Jaswinder Singh Rajput 提交于
Error message should use stderr for verbose (-v), otherwise message will be lost for: $ ./perf stat -v <cmd> > /dev/null For example on AMD bus-cycles event is not available so now it looks like: $ ./perf stat -v -e bus-cycles ls > /dev/null Error: counter 0, sys_perf_counter_open() syscall returned with -1 (Invalid argument) Performance counter stats for 'ls': <not counted> bus-cycles 0.006765877 seconds time elapsed. Signed-off-by: NJaswinder Singh Rajput <jaswinderrajput@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <1245757369.3776.1.camel@localhost.localdomain> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 23 6月, 2009 6 次提交
-
-
由 Ingo Molnar 提交于
Reported-by: NBrice Goglin <Brice.Goglin@inria.fr> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <new-submission> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Peter Zijlstra 提交于
We don't need to add usage counts for swcounter and attr usage models for inherited counters since the parent counter will always have one, which suffices to generate the needed output. This avoids up to 3 global atomic increments per inherited counter. LKML-Reference: <new-submission> Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Peter Zijlstra 提交于
Teach perf_counter_alloc() about inheritance so that we can optimize the inherit path in the next patch. Remove the child_counter->atrr.inherit = 1 line because the only way to get there is if parent_counter->attr.inherit == 1 and we copy the attrs. Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <new-submission> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Peter Zijlstra 提交于
Similar to tracepoints, use an enable variable to reduce overhead when unused. Only look for a counter of a particular event type when we know there is at least one in the system. Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Peter Zijlstra 提交于
Martin Schwidefsky reported "perf report" symbol resolution problems on S390. Since we only report MMAP, not MUNMAP, we have to deal with overlapping maps. We used to simply throw out the old map on the assumption whole maps got unmapped. This obviously doesn't deal with partial unmaps. However it appears some dynamic linkers do fancy partial unmaps (s390), so do something more elaborate and truncate the old maps, only removing them when they've been fully covered. This resolves (part of) the S390 symbol resolution problems. Reported-by: NMartin Schwidefsky <schwidefsky@de.ibm.com> Tested-by: NMartin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <new-submission> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Jaswinder Singh Rajput 提交于
-l is not supported, it should be -S for scale. Signed-off-by: NJaswinder Singh Rajput <jaswinderrajput@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <1245703959.6167.16.camel@localhost.localdomain> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 22 6月, 2009 4 次提交
-
-
由 Jaswinder Singh Rajput 提交于
"faults" should be alias for "page-faults" Also fixed alignment and 80 characters issue Signed-off-by: NJaswinder Singh Rajput <jaswinderrajput@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <1245683846.12092.1.camel@localhost.localdomain> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Peter Zijlstra 提交于
Print more symbol relocation related info under -vv. Signed-off-by: NPeter Zijlstra <peterz@infradead.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <new-submission> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Jaswinder Singh Rajput 提交于
By introducing alias member in event_symbol : 1. duplicate lines are removed, like: cpu-cycles and cycles branch-instructions and branches context-switches and cs cpu-migrations and migrations 2. We can also add alias for another events. Now ./perf list looks like : List of pre-defined events (to be used in -e): cpu-cycles OR cycles [Hardware event] instructions [Hardware event] cache-references [Hardware event] cache-misses [Hardware event] branch-instructions OR branches [Hardware event] branch-misses [Hardware event] bus-cycles [Hardware event] cpu-clock [Software event] task-clock [Software event] page-faults [Software event] faults [Software event] minor-faults [Software event] major-faults [Software event] context-switches OR cs [Software event] cpu-migrations OR migrations [Software event] rNNN [raw hardware event descriptor] Signed-off-by: NJaswinder Singh Rajput <jaswinderrajput@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <1245669268.17153.8.camel@localhost.localdomain> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Jaswinder Singh Rajput 提交于
Define separate declarations for H/W and S/W events to: 1. Shorten name to save some space so that we can add more members 2. Fix alignment 3. Avoid declaring HARDWARE/SOFTWARE again and again. Removed unused CR(x, y) Signed-off-by: NJaswinder Singh Rajput <jaswinderrajput@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <1245669194.17153.6.camel@localhost.localdomain> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 21 6月, 2009 18 次提交
-
-
由 Ingo Molnar 提交于
Lucas De Marchi reported that perf report and perf annotate displays mismatching profile if a perf.data is analyzed on an older kernel - even if the correct vmlinux is specified via the -k option. The reason is the fallback path in util/symbol.c:dso__load_kernel(): int dso__load_kernel(struct dso *self, const char *vmlinux, symbol_filter_t filter, int verbose) { int err = -1; if (vmlinux) err = dso__load_vmlinux(self, vmlinux, filter, verbose); if (err) err = dso__load_kallsyms(self, filter, verbose); return err; } dso__load_vmlinux() returns negative on error, but on success it returns the number of symbols loaded - which confuses the function to load the kallsyms. This is normally harmless, as reporting is usually performed on the same kernel that is analyzed - but if there's a mismatch then we load the wrong kallsyms and create a non-sensical symbol tree. The fix is to only fall back to kallsyms on errors. Reported-by: NLucas De Marchi <lucas.de.marchi@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <new-submission> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Jaswinder Singh Rajput 提交于
Fix AMD's Data Cache Refills from System event. After this patch : ./tools/perf/perf stat -e l1d -e l1d-misses -e l1d-write -e l1d-prefetch -e l1d-prefetch-miss -e l1i -e l1i-misses -e l1i-prefetch -e l2 -e l2-misses -e l2-write -e dtlb -e dtlb-misses -e itlb -e itlb-misses -e bpu -e bpu-misses ls /dev/ > /dev/null Performance counter stats for 'ls /dev/': 2499484 L1-data-Cache-Load-Referencees (scaled from 3.97%) 70347 L1-data-Cache-Load-Misses (scaled from 7.30%) 9360 L1-data-Cache-Store-Referencees (scaled from 8.64%) 32804 L1-data-Cache-Prefetch-Referencees (scaled from 17.72%) 7693 L1-data-Cache-Prefetch-Misses (scaled from 22.97%) 2180945 L1-instruction-Cache-Load-Referencees (scaled from 28.48%) 14518 L1-instruction-Cache-Load-Misses (scaled from 35.00%) 2405 L1-instruction-Cache-Prefetch-Referencees (scaled from 34.89%) 71387 L2-Cache-Load-Referencees (scaled from 34.94%) 18732 L2-Cache-Load-Misses (scaled from 34.92%) 79918 L2-Cache-Store-Referencees (scaled from 36.02%) 1295294 Data-TLB-Cache-Load-Referencees (scaled from 35.99%) 30896 Data-TLB-Cache-Load-Misses (scaled from 33.36%) 1222030 Instruction-TLB-Cache-Load-Referencees (scaled from 29.46%) 357 Instruction-TLB-Cache-Load-Misses (scaled from 20.46%) 530888 Branch-Cache-Load-Referencees (scaled from 11.48%) 8638 Branch-Cache-Load-Misses (scaled from 5.09%) 0.011295149 seconds time elapsed. Earlier it always shows value 0. Signed-off-by: NJaswinder Singh Rajput <jaswinderrajput@gmail.com> LKML-Reference: <1245484165.3102.6.camel@localhost.localdomain> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Johannes Weiner 提交于
da456f14 "page allocator: do not disable interrupts in free_page_mlock()" moved the PG_mlocked clearing after the flag sanity checking which makes mlocked pages always trigger 'bad page'. Fix this by clearing the bit up front. Reported--and-debugged-by: NPeter Chubb <peter.chubb@nicta.com.au> Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org> Acked-by: NMel Gorman <mel@csn.ul.ie> Tested-by: NMaxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
The discussion about using "access_ok()" in get_user_pages_fast() (see commit 7f818906: "x86: don't use 'access_ok()' as a range check in get_user_pages_fast()" for details and end result), made us notice that x86-64 was really being very sloppy about virtual address checking. So be way more careful and straightforward about masking x86-64 virtual addresses: - All the VIRTUAL_MASK* variants now cover half of the address space, it's not like we can use the full mask on a signed integer, and the larger mask just invites mistakes when applying it to either half of the 48-bit address space. - /proc/kcore's kc_offset_to_vaddr() becomes a lot more obvious when it transforms a file offset into a (kernel-half) virtual address. - Unify/simplify the 32-bit and 64-bit USER_DS definition to be based on TASK_SIZE_MAX. This cleanup and more careful/obvious user virtual address checking also uncovered a buglet in the x86-64 implementation of strnlen_user(): it would do an "access_ok()" check on the whole potential area, even if the string itself was much shorter, and thus return an error even for valid strings. Our sloppy checking had hidden this. So this fixes 'strnlen_user()' to do this properly, the same way we already handled user strings in 'strncpy_from_user()'. Namely by just checking the first byte, and then relying on fault handling for the rest. That always works, since we impose a guard page that cannot be mapped at the end of the user space address space (and even if we didn't, we'd have the address space hole). Acked-by: NIngo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Nick Piggin <npiggin@suse.de> Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
Merge branch 'irq-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'irq-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: genirq, irq.h: Fix kernel-doc warnings genirq: fix comment to say IRQ_WAKE_THREAD
-
由 Linus Torvalds 提交于
Merge branch 'perfcounters-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perfcounters-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (49 commits) perfcounter: Handle some IO return values perf_counter: Push perf_sample_data through the swcounter code perf_counter tools: Define and use our own u64, s64 etc. definitions perf_counter: Close race in perf_lock_task_context() perf_counter, x86: Improve interactions with fast-gup perf_counter: Simplify and fix task migration counting perf_counter tools: Add a data file header perf_counter: Update userspace callchain sampling uses perf_counter: Make callchain samples extensible perf report: Filter to parent set by default perf_counter tools: Handle lost events perf_counter: Add event overlow handling fs: Provide empty .set_page_dirty() aop for anon inodes perf_counter: tools: Makefile tweaks for 64-bit powerpc perf_counter: powerpc: Add processor back-end for MPC7450 family perf_counter: powerpc: Make powerpc perf_counter code safe for 32-bit kernels perf_counter: powerpc: Change how processor-specific back-ends get selected perf_counter: powerpc: Use unsigned long for register and constraint values perf_counter: powerpc: Enable use of software counters on 32-bit powerpc perf_counter tools: Add and use isprint() ...
-
由 Linus Torvalds 提交于
Merge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: sched: Fix out of scope variable access in sched_slice() sched: Hide runqueues from direct refer at source code level sched: Remove unneeded __ref tag sched, x86: Fix cpufreq + sched_clock() TSC scaling
-
由 Linus Torvalds 提交于
Merge branch 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (24 commits) tracing/urgent: warn in case of ftrace_start_up inbalance tracing/urgent: fix unbalanced ftrace_start_up function-graph: add stack frame test function-graph: disable when both x86_32 and optimize for size are configured ring-buffer: have benchmark test print to trace buffer ring-buffer: do not grab locks in nmi ring-buffer: add locks around rb_per_cpu_empty ring-buffer: check for less than two in size allocation ring-buffer: remove useless compile check for buffer_page size ring-buffer: remove useless warn on check ring-buffer: use BUF_PAGE_HDR_SIZE in calculating index tracing: update sample event documentation tracing/filters: fix race between filter setting and module unload tracing/filters: free filter_string in destroy_preds() ring-buffer: use commit counters for commit pointer accounting ring-buffer: remove unused variable ring-buffer: have benchmark test handle discarded events ring-buffer: prevent adding write in discarded area tracing/filters: strloc should be unsigned short tracing/filters: operand can be negative ... Fix up kmemcheck-induced conflict in kernel/trace/ring_buffer.c manually
-
由 Linus Torvalds 提交于
Merge branch 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: NOHZ: Properly feed cpufreq ondemand governor
-
由 Linus Torvalds 提交于
Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (45 commits) x86, mce: fix error path in mce_create_device() x86: use zalloc_cpumask_var for mce_dev_initialized x86: fix duplicated sysfs attribute x86: de-assembler-ize asm/desc.h i386: fix/simplify espfix stack switching, move it into assembly i386: fix return to 16-bit stack from NMI handler x86, ioapic: Don't call disconnect_bsp_APIC if no APIC present x86: Remove duplicated #include's x86: msr.h linux/types.h is only required for __KERNEL__ x86: nmi: Add Intel processor 0x6f4 to NMI perfctr1 workaround x86, mce: mce_intel.c needs <asm/apic.h> x86: apic/io_apic.c: dmar_msi_type should be static x86, io_apic.c: Work around compiler warning x86: mce: Don't touch THERMAL_APIC_VECTOR if no active APIC present x86: mce: Handle banks == 0 case in K7 quirk x86, boot: use .code16gcc instead of .code16 x86: correct the conversion of EFI memory types x86: cap iomem_resource to addressable physical memory x86, mce: rename _64.c files which are no longer 64-bit-specific x86, mce: mce.h cleanup ... Manually fix up trivial conflict in arch/x86/mm/fault.c
-
git://git.monstr.eu/linux-2.6-microblaze由 Linus Torvalds 提交于
* 'for-linus' of git://git.monstr.eu/linux-2.6-microblaze: microblaze: Add missing symbols for CONSTRUCTORS support microblaze: remove init_mm
-
git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-fixes由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-fixes: kernel-doc: fix param matching for array params kernel-doc: ignore kmemcheck_bitfield_begin/end kallsyms: fix inverted valid symbol checking kbuild: fix build error during make htmldocs
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (35 commits) Input: add driver for Synaptics I2C touchpad Input: synaptics - add support for reporting x/y resolution Input: ALPS - handle touchpoints buttons correctly Input: gpio-keys - change timer to workqueue Input: ads7846 - pin change interrupt support Input: add support for touchscreen on W90P910 ARM platform Input: appletouch - improve finger detection Input: wacom - clear Intuos4 wheel data when finger leaves proximity Input: ucb1400 - move static function from header into core Input: add driver for EETI touchpanels Input: ads7846 - more detailed model name in sysfs Input: ads7846 - support swapping x and y axes Input: ati_remote2 - use non-atomic bitops Input: introduce lm8323 keypad driver Input: psmouse - ESD workaround fix for OLPC XO touchpad Input: tsc2007 - make sure platform provides get_pendown_state() Input: uinput - flush all pending ff effects before destroying device Input: simplify name handling for certain input handles Input: serio - do not use deprecated dev.power.power_state Input: wacom - add support for Intuos4 tablets ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6由 Linus Torvalds 提交于
* 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (24 commits) agp/intel: Make intel_i965_mask_memory use dma_addr_t for physical addresses agp: add user mapping support to ATI AGP bridge. drm/i915: enable GEM on PAE. drm/radeon: fix unused variables warning agp: switch AGP to use page array instead of unsigned long array agpgart: detected ALi M???? chipset with M1621 drm/radeon: command stream checker for r3xx-r5xx hardware drm/radeon: Fully initialize LVDS info also when we can't get it from the ROM. radeon: Fix CP byte order on big endian architectures with KMS. agp/uninorth: Handle user memory types. drm/ttm: Add some powerpc cache flush code. radeon: Enable modesetting on non-x86. drm/radeon: Respect AGP cant_use_aperture flag. drm: EDID endianness fixes. drm/radeon: this VRAM vs aperture test is wrong, just remove it. drm/ttm: fix an error path to exit function correctly drm: Apply "Memory fragmentation from lost alignment blocks" ttm: Return -ERESTART when a signal interrupts bo eviction. drm: Remove memory debugging infrastructure. drm/i915: Clear fence register on tiling stride change. ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/hirofumi/fatfs-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/hirofumi/fatfs-2.6: fat: Fix the removal of opts->fs_dmask
-
git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6由 Linus Torvalds 提交于
* 'for-2.6.31' of git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (34 commits) ide-cd: prevent null pointer deref via cdrom_newpc_intr ide: BUG() on unknown requests ide: filter out invalid DMA xfer mode changes in HDIO_DRIVE_CMD ioctl handler ide: do not access ide_drive_t 'drive_data' field directly sl82c105: implement test_irq() method siimage: implement test_irq() method pdc202xx_old: implement test_irq() method (take 2) cmd64x: implement test_irq() method cmd640: implement test_irq() method ide: move ack_intr() method into 'struct ide_port_ops' (take 2) ide: move IRQ clearing from ack_intr() method to clear_irq() method (take 2) siimage: use ide_dma_test_irq() (take 2) cmd64x: implement clear_irq() method (take 2) ide: call clear_irq() method in ide_timer_expiry() sgiioc4: coding style cleanup ide: don't enable IORDY at a probe time ide: IORDY handling fixes ata: add ata_id_pio_need_iordy() helper (v2) ide-tape: fix build issue ide: unify interrupt reason checking ...
-
由 Linus Torvalds 提交于
It's really not right to use 'access_ok()', since that is meant for the normal "get_user()" and "copy_from/to_user()" accesses, which are done through the TLB, rather than through the page tables. Why? access_ok() does both too few, and too many checks. Too many, because it is meant for regular kernel accesses that will not honor the 'user' bit in the page tables, and because it honors the USER_DS vs KERNEL_DS distinction that we shouldn't care about in GUP. And too few, because it doesn't do the 'canonical' check on the address on x86-64, since the TLB will do that for us. So instead of using a function that isn't meant for this, and does something else and much more complicated, just do the real rules: we don't want the range to overflow, and on x86-64, we want it to be a canonical low address (on 32-bit, all addresses are canonical). Acked-by: NIngo Molnar <mingo@elte.hu> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Ingo Molnar 提交于
Merge branch 'tip/tracing/urgent-1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-trace into tracing/urgent
-
- 20 6月, 2009 8 次提交
-
-
由 Ingo Molnar 提交于
Merge branch 'tip/tracing/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-trace into tracing/urgent
-
由 OGAWA Hirofumi 提交于
(ce3b0f8d: New helper - current_umask()) is removing the opts->fs_dmask, probably it's a cut-and-paste miss or something. Signed-off-by: NOGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
-
由 Michal Simek 提交于
Commit b99b87f7 add CONSTRUCTOR support to Linux but Microblaze not defined KERNEL_CTORS symbols which are used with that patch. This patch fixed it. Signed-off-by: NMichal Simek <monstr@monstr.eu>
-
由 Arnd Bergmann 提交于
Alexey removed the definition for init_mm from all architectures but forgot microblaze, which was only recently added. This fixes the microblaze build by dropping it there as well. Cc: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NMichal Simek <monstr@monstr.eu>
-
由 Randy Dunlap 提交于
Fix function actual parameter vs. kernel-doc description matching so that a warning is not printed when it should not be: Warning(include/linux/etherdevice.h:199): Excess function parameter 'addr' description in 'is_etherdev_addr' Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-
由 Randy Dunlap 提交于
Teach kernel-doc to ignore kmemcheck_bitfield_{begin,end} sugar so that it won't generate warnings like this: Warning(include/net/sock.h:297): No description found for parameter 'kmemcheck_bitfield_begin(flags)' Warning(include/net/sock.h:297): No description found for parameter 'kmemcheck_bitfield_end(flags)' Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-
由 Mike Frysinger 提交于
The previous commit (17b1f0de) introduced a slightly broken consolidation of the memory text range checking. Signed-off-by: NMike Frysinger <vapier@gentoo.org> Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-
由 Amerigo Wang 提交于
Fix the following build error when do 'make htmldocs': DOCPROC Documentation/DocBook/debugobjects.xml exec /scripts/kernel-doc: No such file or directory exec /scripts/kernel-doc: No such file or directory Reported-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NWANG Cong <amwang@redhat.com> Acked-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-