- 19 10月, 2012 1 次提交
-
-
由 Eric Dumazet 提交于
tcp_ioctl() tries to take into account if tcp socket received a FIN to report correct number bytes in receive queue. But its flaky because if the application ate the last skb, we return 1 instead of 0. Correct way to detect that FIN was received is to test SOCK_DONE. Reported-by: NElliot Hughes <enh@google.com> Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: Neal Cardwell <ncardwell@google.com> Cc: Tom Herbert <therbert@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 25 9月, 2012 1 次提交
-
-
由 Eric Dumazet 提交于
We currently use a per socket order-0 page cache for tcp_sendmsg() operations. This page is used to build fragments for skbs. Its done to increase probability of coalescing small write() into single segments in skbs still in write queue (not yet sent) But it wastes a lot of memory for applications handling many mostly idle sockets, since each socket holds one page in sk->sk_sndmsg_page Its also quite inefficient to build TSO 64KB packets, because we need about 16 pages per skb on arches where PAGE_SIZE = 4096, so we hit page allocator more than wanted. This patch adds a per task frag allocator and uses bigger pages, if available. An automatic fallback is done in case of memory pressure. (up to 32768 bytes per frag, thats order-3 pages on x86) This increases TCP stream performance by 20% on loopback device, but also benefits on other network devices, since 8x less frags are mapped on transmit and unmapped on tx completion. Alexander Duyck mentioned a probable performance win on systems with IOMMU enabled. Its possible some SG enabled hardware cant cope with bigger fragments, but their ndo_start_xmit() should already handle this, splitting a fragment in sub fragments, since some arches have PAGE_SIZE=65536 Successfully tested on various ethernet devices. (ixgbe, igb, bnx2x, tg3, mellanox mlx4) Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: Ben Hutchings <bhutchings@solarflare.com> Cc: Vijay Subramanian <subramanian.vijay@gmail.com> Cc: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: NVijay Subramanian <subramanian.vijay@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 21 9月, 2012 2 次提交
-
-
由 Andrey Vagin 提交于
rcv_wscale is a symetric parameter with snd_wscale. Both this parameters are set on a connection handshake. Without this value a remote window size can not be interpreted correctly, because a value from a packet should be shifted on rcv_wscale. And one more thing is that wscale_ok should be set too. This patch doesn't break a backward compatibility. If someone uses it in a old scheme, a rcv window will be restored with the same bug (rcv_wscale = 0). v2: Save backward compatibility on big-endian system. Before the first two bytes were snd_wscale and the second two bytes were rcv_wscale. Now snd_wscale is opt_val & 0xFFFF and rcv_wscale >> 16. This approach is independent on byte ordering. Cc: David S. Miller <davem@davemloft.net> Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Cc: James Morris <jmorris@namei.org> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: Patrick McHardy <kaber@trash.net> CC: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: NAndrew Vagin <avagin@openvz.org> Acked-by: NPavel Emelyanov <xemul@parallels.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Christoph Paasch 提交于
Signed-off-by: NChristoph Paasch <christoph.paasch@uclouvain.be> Acked-by: NH.K. Jerry Chu <hkchu@google.com> Acked-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 20 9月, 2012 1 次提交
-
-
由 Michal Kubeček 提交于
If recv() syscall is called for a TCP socket so that - IOAT DMA is used - MSG_WAITALL flag is used - requested length is bigger than sk_rcvbuf - enough data has already arrived to bring rcv_wnd to zero then when tcp_recvmsg() gets to calling sk_wait_data(), receive window can be still zero while sk_async_wait_queue exhausts enough space to keep it zero. As this queue isn't cleaned until the tcp_service_net_dma() call, sk_wait_data() cannot receive any data and blocks forever. If zero receive window and non-empty sk_async_wait_queue is detected before calling sk_wait_data(), process the queue first. Signed-off-by: NMichal Kubecek <mkubecek@suse.cz> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 01 9月, 2012 1 次提交
-
-
由 Jerry Chu 提交于
This patch builds on top of the previous patch to add the support for TFO listeners. This includes - 1. allocating, properly initializing, and managing the per listener fastopen_queue structure when TFO is enabled 2. changes to the inet_csk_accept code to support TFO. E.g., the request_sock can no longer be freed upon accept(), not until 3WHS finishes 3. allowing a TCP_SYN_RECV socket to properly poll() and sendmsg() if it's a TFO socket 4. properly closing a TFO listener, and a TFO socket before 3WHS finishes 5. supporting TCP_FASTOPEN socket option 6. modifying tcp_check_req() to use to check a TFO socket as well as request_sock 7. supporting TCP's TFO cookie option 8. adding a new SYN-ACK retransmit handler to use the timer directly off the TFO socket rather than the listener socket. Note that TFO server side will not retransmit anything other than SYN-ACK until the 3WHS is completed. The patch also contains an important function "reqsk_fastopen_remove()" to manage the somewhat complex relation between a listener, its request_sock, and the corresponding child socket. See the comment above the function for the detail. Signed-off-by: NH.K. Jerry Chu <hkchu@google.com> Cc: Yuchung Cheng <ycheng@google.com> Cc: Neal Cardwell <ncardwell@google.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Tom Herbert <therbert@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 02 8月, 2012 1 次提交
-
-
由 Ben Hutchings 提交于
Cache the device gso_max_segs in sock::sk_gso_max_segs and use it to limit the size of TSO skbs. This avoids the need to fall back to software GSO for local TCP senders. Signed-off-by: NBen Hutchings <bhutchings@solarflare.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 28 7月, 2012 1 次提交
-
-
由 Hangbin Liu 提交于
TCP_USER_TIMEOUT is a TCP level socket option that takes an unsigned int. But patch "tcp: Add TCP_USER_TIMEOUT socket option"(dca43c75) didn't check the negative values. If a user assign -1 to it, the socket will set successfully and wait for 4294967295 miliseconds. This patch add a negative value check to avoid this issue. Signed-off-by: NHangbin Liu <liuhangbin@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 20 7月, 2012 1 次提交
-
-
由 Yuchung Cheng 提交于
sendmsg() (or sendto()) with MSG_FASTOPEN is a combo of connect(2) and write(2). The application should replace connect() with it to send data in the opening SYN packet. For blocking socket, sendmsg() blocks until all the data are buffered locally and the handshake is completed like connect() call. It returns similar errno like connect() if the TCP handshake fails. For non-blocking socket, it returns the number of bytes queued (and transmitted in the SYN-data packet) if cookie is available. If cookie is not available, it transmits a data-less SYN packet with Fast Open cookie request option and returns -EINPROGRESS like connect(). Using MSG_FASTOPEN on connecting or connected socket will result in simlar errno like repeating connect() calls. Therefore the application should only use this flag on new sockets. The buffer size of sendmsg() is independent of the MSS of the connection. Signed-off-by: NYuchung Cheng <ycheng@google.com> Acked-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 12 7月, 2012 1 次提交
-
-
由 Eric Dumazet 提交于
This introduce TSQ (TCP Small Queues) TSQ goal is to reduce number of TCP packets in xmit queues (qdisc & device queues), to reduce RTT and cwnd bias, part of the bufferbloat problem. sk->sk_wmem_alloc not allowed to grow above a given limit, allowing no more than ~128KB [1] per tcp socket in qdisc/dev layers at a given time. TSO packets are sized/capped to half the limit, so that we have two TSO packets in flight, allowing better bandwidth use. As a side effect, setting the limit to 40000 automatically reduces the standard gso max limit (65536) to 40000/2 : It can help to reduce latencies of high prio packets, having smaller TSO packets. This means we divert sock_wfree() to a tcp_wfree() handler, to queue/send following frames when skb_orphan() [2] is called for the already queued skbs. Results on my dev machines (tg3/ixgbe nics) are really impressive, using standard pfifo_fast, and with or without TSO/GSO. Without reduction of nominal bandwidth, we have reduction of buffering per bulk sender : < 1ms on Gbit (instead of 50ms with TSO) < 8ms on 100Mbit (instead of 132 ms) I no longer have 4 MBytes backlogged in qdisc by a single netperf session, and both side socket autotuning no longer use 4 Mbytes. As skb destructor cannot restart xmit itself ( as qdisc lock might be taken at this point ), we delegate the work to a tasklet. We use one tasklest per cpu for performance reasons. If tasklet finds a socket owned by the user, it sets TSQ_OWNED flag. This flag is tested in a new protocol method called from release_sock(), to eventually send new segments. [1] New /proc/sys/net/ipv4/tcp_limit_output_bytes tunable [2] skb_orphan() is usually called at TX completion time, but some drivers call it in their start_xmit() handler. These drivers should at least use BQL, or else a single TCP session can still fill the whole NIC TX ring, since TSQ will have no effect. Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: Dave Taht <dave.taht@bufferbloat.net> Cc: Tom Herbert <therbert@google.com> Cc: Matt Mathis <mattmathis@google.com> Cc: Yuchung Cheng <ycheng@google.com> Cc: Nandita Dukkipati <nanditad@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 11 7月, 2012 2 次提交
-
-
由 Ben Hutchings 提交于
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Maintain a local hash table of TCP dynamic metrics blobs. Computed TCP metrics are no longer maintained in the route metrics. The table uses RCU and an extremely simple hash so that it has low latency and low overhead. A simple hash is legitimate because we only make metrics blobs for fully established connections. Some tweaking of the default hash table sizes, metric timeouts, and the hash chain length limit certainly could use some tweaking. But the basic design seems sound. With help from Eric Dumazet and Joe Perches. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 24 5月, 2012 1 次提交
-
-
由 Tim Bird 提交于
UDP stack needs a minimum hash size value for proper operation and also uses alloc_large_system_hash() for proper NUMA distribution of its hash tables and automatic sizing depending on available system memory. On some low memory situations, udp_table_init() must ignore the alloc_large_system_hash() result and reallocs a bigger memory area. As we cannot easily free old hash table, we leak it and kmemleak can issue a warning. This patch adds a low limit parameter to alloc_large_system_hash() to solve this problem. We then specify UDP_HTABLE_SIZE_MIN for UDP/UDPLite hash table allocation. Reported-by: NMark Asselstine <mark.asselstine@windriver.com> Reported-by: NTim Bird <tim.bird@am.sony.com> Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 20 5月, 2012 1 次提交
-
-
由 Eldad Zack 提交于
Replace simple_strtoul with kstrtoul in three similar occurrences, all setup handlers: * route.c: set_rhash_entries * tcp.c: set_thash_entries * udp.c: set_uhash_entries Also check if the conversion failed. Signed-off-by: NEldad Zack <eldad@fogrefinery.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 18 5月, 2012 2 次提交
-
-
由 Willy Tarreau 提交于
Since recent changes on TCP splicing (starting with commits 2f533844 "tcp: allow splice() to build full TSO packets" and 35f9c09f "tcp: tcp_sendpages() should call tcp_push() once"), I started seeing massive stalls when forwarding traffic between two sockets using splice() when pipe buffers were larger than socket buffers. Latest changes (net: netdev_alloc_skb() use build_skb()) made the problem even more apparent. The reason seems to be that if do_tcp_sendpages() fails on out of memory condition without being able to send at least one byte, tcp_push() is not called and the buffers cannot be flushed. After applying the attached patch, I cannot reproduce the stalls at all and the data rate it perfectly stable and steady under any condition which previously caused the problem to be permanent. The issue seems to have been there since before the kernel migrated to git, which makes me think that the stalls I occasionally experienced with tux during stress-tests years ago were probably related to the same issue. This issue was first encountered on 3.0.31 and 3.2.17, so please backport to -stable. Signed-off-by: NWilly Tarreau <w@1wt.eu> Acked-by: NEric Dumazet <edumazet@google.com> Cc: <stable@vger.kernel.org>
-
由 Eric Dumazet 提交于
bool conversions where possible. __inline__ -> inline space cleanups Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 17 5月, 2012 1 次提交
-
-
由 Eric Dumazet 提交于
bool/const conversions where possible __inline__ -> inline space cleanups Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 16 5月, 2012 1 次提交
-
-
由 Joe Perches 提交于
Standardize the net core ratelimited logging functions. Coalesce formats, align arguments. Change a printk then vprintk sequence to use printf extension %pV. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 11 5月, 2012 1 次提交
-
-
由 Pavel Emelyanov 提交于
It actually works on the input queue and will use its read mem routines, thus it's better to have in in the tcp_input.c file. Signed-off-by: NPavel Emelyanov <xemul@parallels.com> Acked-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 03 5月, 2012 3 次提交
-
-
由 Eric Dumazet 提交于
Extend tcp coalescing implementing it from tcp_queue_rcv(), the main receiver function when application is not blocked in recvmsg(). Function tcp_queue_rcv() is moved a bit to allow its call from tcp_data_queue() This gives good results especially if GRO could not kick, and if skb head is a fragment. Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: Alexander Duyck <alexander.h.duyck@intel.com> Cc: Neal Cardwell <ncardwell@google.com> Cc: Tom Herbert <therbert@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
tcp_adv_win_scale default value is 2, meaning we expect a good citizen skb to have skb->len / skb->truesize ratio of 75% (3/4) In 2.6 kernels we (mis)accounted for typical MSS=1460 frame : 1536 + 64 + 256 = 1856 'estimated truesize', and 1856 * 3/4 = 1392. So these skbs were considered as not bloated. With recent truesize fixes, a typical MSS=1460 frame truesize is now the more precise : 2048 + 256 = 2304. But 2304 * 3/4 = 1728. So these skb are not good citizen anymore, because 1460 < 1728 (GRO can escape this problem because it build skbs with a too low truesize.) This also means tcp advertises a too optimistic window for a given allocated rcvspace : When receiving frames, sk_rmem_alloc can hit sk_rcvbuf limit and we call tcp_prune_queue()/tcp_collapse() too often, especially when application is slow to drain its receive queue or in case of losses (netperf is fast, scp is slow). This is a major latency source. We should adjust the len/truesize ratio to 50% instead of 75% This patch : 1) changes tcp_adv_win_scale default to 1 instead of 2 2) increase tcp_rmem[2] limit from 4MB to 6MB to take into account better truesize tracking and to allow autotuning tcp receive window to reach same value than before. Note that same amount of kernel memory is consumed compared to 2.6 kernels. Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: Neal Cardwell <ncardwell@google.com> Cc: Tom Herbert <therbert@google.com> Cc: Yuchung Cheng <ycheng@google.com> Acked-by: NNeal Cardwell <ncardwell@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yuchung Cheng 提交于
This patch implements RFC 5827 early retransmit (ER) for TCP. It reduces DUPACK threshold (dupthresh) if outstanding packets are less than 4 to recover losses by fast recovery instead of timeout. While the algorithm is simple, small but frequent network reordering makes this feature dangerous: the connection repeatedly enter false recovery and degrade performance. Therefore we implement a mitigation suggested in the appendix of the RFC that delays entering fast recovery by a small interval, i.e., RTT/4. Currently ER is conservative and is disabled for the rest of the connection after the first reordering event. A large scale web server experiment on the performance impact of ER is summarized in section 6 of the paper "Proportional Rate Reduction for TCP”, IMC 2011. http://conferences.sigcomm.org/imc/2011/docs/p155.pdf Note that Linux has a similar feature called THIN_DUPACK. The differences are THIN_DUPACK do not mitigate reorderings and is only used after slow start. Currently ER is disabled if THIN_DUPACK is enabled. I would be happy to merge THIN_DUPACK feature with ER if people think it's a good idea. ER is enabled by sysctl_tcp_early_retrans: 0: Disables ER 1: Reduce dupthresh to packets_out - 1 when outstanding packets < 4. 2: (Default) reduce dupthresh like mode 1. In addition, delay entering fast recovery by RTT/4. Note: mode 2 is implemented in the third part of this patch series. Signed-off-by: NYuchung Cheng <ycheng@google.com> Acked-by: NNeal Cardwell <ncardwell@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 26 4月, 2012 1 次提交
-
-
由 Pavel Emelyanov 提交于
Don't pick __u8/__u16 values directly from raw pointers, but instead use an array of structures of code:value pairs. This is OK, since the buffer we take options from is not an skb memory, but a user-to-kernel one. For those options which don't require any value now, require this to be zero (for potential future extension of this API). v2: Changed tcp_repair_opt to use two __u32-s as spotted by David Laight. Signed-off-by: NPavel Emelyanov <xemul@parallels.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 24 4月, 2012 1 次提交
-
-
由 Eric Dumazet 提交于
Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 22 4月, 2012 6 次提交
-
-
由 Neal Cardwell 提交于
This commit moves the (substantial) common code shared between tcp_v4_init_sock() and tcp_v6_init_sock() to a new address-family independent function, tcp_init_sock(). Centralizing this functionality should help avoid drift issues, e.g. where the IPv4 side is updated without a corresponding update to IPv6. There was already some drift: IPv4 initialized snd_cwnd to TCP_INIT_CWND, while the IPv6 side was still initializing snd_cwnd to 2 (in this case it should not matter, since snd_cwnd is also initialized in tcp_init_metrics(), but the general risks and maintenance overhead remain). When diffing the old and new code, note that new tcp_init_sock() function uses the order of steps from the tcp_v4_init_sock() implementation (the order is slightly different in tcp_v6_init_sock()). Signed-off-by: NNeal Cardwell <ncardwell@google.com> Acked-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pavel Emelyanov 提交于
There are options, which are set up on a socket while performing TCP handshake. Need to resurrect them on a socket while repairing. A new sockoption accepts a buffer and parses it. The buffer should be CODE:VALUE sequence of bytes, where CODE is standard option code and VALUE is the respective value. Only 4 options should be handled on repaired socket. To read 3 out of 4 of these options the TCP_INFO sockoption can be used. An ability to get the last one (the mss_clamp) was added by the previous patch. Now the restore. Three of these options -- timestamp_ok, mss_clamp and snd_wscale -- are just restored on a coket. The sack_ok flags has 2 issues. First, whether or not to do sacks at all. This flag is just read and set back. No other sack info is saved or restored, since according to the standart and the code dropping all sack-ed segments is OK, the sender will resubmit them again, so after the repair we will probably experience a pause in connection. Next, the fack bit. It's just set back on a socket if the respective sysctl is set. No collected stats about packets flow is preserved. As far as I see (plz, correct me if I'm wrong) the fack-based congestion algorithm survives dropping all of the stats and repairs itself eventually, probably losing the performance for that period. Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pavel Emelyanov 提交于
The mss_clamp is the only connection-time negotiated option which cannot be obtained from the user space. Make the TCP_MAXSEG sockopt report one in the repair mode. Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pavel Emelyanov 提交于
Reading queues under repair mode is done with recvmsg call. The queue-under-repair set by TCP_REPAIR_QUEUE option is used to determine which queue should be read. Thus both send and receive queue can be read with this. Caller must pass the MSG_PEEK flag. Writing to queues is done with sendmsg call and yet again -- the repair-queue option can be used to push data into the receive queue. When putting an skb into receive queue a zero tcp header is appented to its head to address the tcp_hdr(skb)->syn and the ->fin checks by the (after repair) tcp_recvmsg. These flags flags are both set to zero and that's why. The fin cannot be met in the queue while reading the source socket, since the repair only works for closed/established sockets and queueing fin packet always changes its state. The syn in the queue denotes that the respective skb's seq is "off-by-one" as compared to the actual payload lenght. Thus, at the rcv queue refill we can just drop this flag and set the skb's sequences to precice values. When the repair mode is turned off, the write queue seqs are updated so that the whole queue is considered to be 'already sent, waiting for ACKs' (write_seq = snd_nxt <= snd_una). From the protocol POV the send queue looks like it was sent, but the data between the write_seq and snd_nxt is lost in the network. This helps to avoid another sockoption for setting the snd_nxt sequence. Leaving the whole queue in a 'not yet sent' state (as it will be after sendmsg-s) will not allow to receive any acks from the peer since the ack_seq will be after the snd_nxt. Thus even the ack for the window probe will be dropped and the connection will be 'locked' with the zero peer window. Signed-off-by: NPavel Emelyanov <xemul@parallels.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pavel Emelyanov 提交于
This includes (according the the previous description): * TCP_REPAIR sockoption This one just puts the socket in/out of the repair mode. Allowed for CAP_NET_ADMIN and for closed/establised sockets only. When repair mode is turned off and the socket happens to be in the established state the window probe is sent to the peer to 'unlock' the connection. * TCP_REPAIR_QUEUE sockoption This one sets the queue which we're about to repair. The 'no-queue' is set by default. * TCP_QUEUE_SEQ socoption Sets the write_seq/rcv_nxt of a selected repaired queue. Allowed for TCP_CLOSE-d sockets only. When the socket changes its state the other seq-s are changed by the kernel according to the protocol rules (most of the existing code is actually reused). * Ability to forcibly bind a socket to a port The sk->sk_reuse is set to SK_FORCE_REUSE. * Immediate connect modification The connect syscall initializes the connection, then directly jumps to the code which finalizes it. * Silent close modification The close just aborts the connection (similar to SO_LINGER with 0 time) but without sending any FIN/RST-s to peer. Signed-off-by: NPavel Emelyanov <xemul@parallels.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pavel Emelyanov 提交于
This is just the preparation patch, which makes the needed for TCP repair code ready for use. Signed-off-by: NPavel Emelyanov <xemul@parallels.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 16 4月, 2012 1 次提交
-
-
由 Eric Dumazet 提交于
Use of "unsigned int" is preferred to bare "unsigned" in net tree. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 11 4月, 2012 2 次提交
-
-
由 Eric Dumazet 提交于
Marc Merlin reported many order-1 allocations failures in TX path on its wireless setup, that dont make any sense with MTU=1500 network, and non SG capable hardware. After investigation, it turns out TCP uses sk_stream_alloc_skb() and used as a convention skb_tailroom(skb) to know how many bytes of data payload could be put in this skb (for non SG capable devices) Note : these skb used kmalloc-4096 (MTU=1500 + MAX_HEADER + sizeof(struct skb_shared_info) being above 2048) Later, mac80211 layer need to add some bytes at the tail of skb (IEEE80211_ENCRYPT_TAILROOM = 18 bytes) and since no more tailroom is available has to call pskb_expand_head() and request order-1 allocations. This patch changes sk_stream_alloc_skb() so that only sk->sk_prot->max_header bytes of headroom are reserved, and use a new skb field, avail_size to hold the data payload limit. This way, order-0 allocations done by TCP stack can leave more than 2 KB of tailroom and no more allocation is performed in mac80211 layer (or any layer needing some tailroom) avail_size is unioned with mark/dropcount, since mark will be set later in IP stack for output packets. Therefore, skb size is unchanged. Reported-by: NMarc MERLIN <marc@merlins.org> Tested-by: NMarc MERLIN <marc@merlins.org> Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Commit c43b874d (tcp: properly initialize tcp memory limits) tried to fix a regression added in commits 4acb4190 & 3dc43e3e, but still get it wrong. Result is machines with low amount of memory have too small tcp_rmem[2] value and slow tcp receives : Per socket limit being 1/1024 of memory instead of 1/128 in old kernels, so rcv window is capped to small values. Fix this to match comment and previous behavior. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Glauber Costa <glommer@parallels.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 06 4月, 2012 2 次提交
-
-
由 Eric Dumazet 提交于
commit 2f533844 (tcp: allow splice() to build full TSO packets) added a regression for splice() calls using SPLICE_F_MORE. We need to call tcp_flush() at the end of the last page processed in tcp_sendpages(), or else transmits can be deferred and future sends stall. Add a new internal flag, MSG_SENDPAGE_NOTLAST, acting like MSG_MORE, but with different semantic. For all sendpage() providers, its a transparent change. Only sock_sendpage() and tcp_sendpages() can differentiate the two different flags provided by pipe_to_sendpage() Reported-by: NTom Herbert <therbert@google.com> Cc: Nandita Dukkipati <nanditad@google.com> Cc: Neal Cardwell <ncardwell@google.com> Cc: Tom Herbert <therbert@google.com> Cc: Yuchung Cheng <ycheng@google.com> Cc: H.K. Jerry Chu <hkchu@google.com> Cc: Maciej Żenczykowski <maze@google.com> Cc: Mahesh Bandewar <maheshb@google.com> Cc: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: NEric Dumazet <eric.dumazet@gmail>com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dave Jiang 提交于
This is the fallout from adding memcpy alignment workaround for certain IOATDMA hardware. NetDMA will only use DMA engine that can handle byte align ops. Acked-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NDave Jiang <dave.jiang@intel.com> Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
- 04 4月, 2012 1 次提交
-
-
由 Eric Dumazet 提交于
vmsplice()/splice(pipe, socket) call do_tcp_sendpages() one page at a time, adding at most 4096 bytes to an skb. (assuming PAGE_SIZE=4096) The call to tcp_push() at the end of do_tcp_sendpages() forces an immediate xmit when pipe is not already filled, and tso_fragment() try to split these skb to MSS multiples. 4096 bytes are usually split in a skb with 2 MSS, and a remaining sub-mss skb (assuming MTU=1500) This makes slow start suboptimal because many small frames are sent to qdisc/driver layers instead of big ones (constrained by cwnd and packets in flight of course) In fact, applications using sendmsg() (adding an additional memory copy) instead of vmsplice()/splice()/sendfile() are a bit faster because of this anomaly, especially if serving small files in environments with large initial [c]wnd. Call tcp_push() only if MSG_MORE is not set in the flags parameter. This bit is automatically provided by splice() internals but for the last page, or on all pages if user specified SPLICE_F_MORE splice() flag. In some workloads, this can reduce number of sent logical packets by an order of magnitude, making zero-copy TCP actually faster than one-copy :) Reported-by: NTom Herbert <therbert@google.com> Cc: Nandita Dukkipati <nanditad@google.com> Cc: Neal Cardwell <ncardwell@google.com> Cc: Tom Herbert <therbert@google.com> Cc: Yuchung Cheng <ycheng@google.com> Cc: H.K. Jerry Chu <hkchu@google.com> Cc: Maciej Żenczykowski <maze@google.com> Cc: Mahesh Bandewar <maheshb@google.com> Cc: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: NEric Dumazet <eric.dumazet@gmail>com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 13 3月, 2012 1 次提交
-
-
由 Joe Perches 提交于
Add #define pr_fmt(fmt) as appropriate. Add "IPv4: ", "TCP: ", and "IPsec: " to appropriate files. Standardize on "UDPLite: " for appropriate uses. Some prefixes were previously "UDPLITE: " and "UDP-Lite: ". Add KBUILD_MODNAME ": " to icmp and gre. Remove embedded prefixes as appropriate. Add missing "\n" to pr_info in gre.c. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 12 3月, 2012 1 次提交
-
-
由 Joe Perches 提交于
Use a more current kernel messaging style. Convert a printk block to print_hex_dump. Coalesce formats, align arguments. Use %s, __func__ instead of embedding function names. Some messages that were prefixed with <foo>_close are now prefixed with <foo>_fini. Some ah4 and esp messages are now not prefixed with "ip ". The intent of this patch is to later add something like #define pr_fmt(fmt) "IPv4: " fmt. to standardize the output messages. Text size is trivially reduced. (x86-32 allyesconfig) $ size net/ipv4/built-in.o* text data bss dec hex filename 887888 31558 249696 1169142 11d6f6 net/ipv4/built-in.o.new 887934 31558 249800 1169292 11d78c net/ipv4/built-in.o.old Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 14 2月, 2012 1 次提交
-
-
由 Dimitri Sivanich 提交于
When the number of dentry cache hash table entries gets too high (2147483648 entries), as happens by default on a 16TB system, use of a signed integer in the dcache_init() initialization loop prevents the dentry_hashtable from getting initialized, causing a panic in __d_lookup(). Fix this in dcache_init() and similar areas. Signed-off-by: NDimitri Sivanich <sivanich@sgi.com> Acked-by: NDavid S. Miller <davem@davemloft.net> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 03 2月, 2012 1 次提交
-
-
由 Jason Wang 提交于
Commit 4acb4190 tries to fix the using uninitialized value introduced by commit 3dc43e3e, but it would make the per-socket memory limits too small. This patch fixes this and also remove the redundant codes introduced in 4acb4190. Signed-off-by: NJason Wang <jasowang@redhat.com> Acked-by: NGlauber Costa <glommer@parallels.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-