- 31 7月, 2012 18 次提交
-
-
由 Johannes Berg 提交于
Since we only need the band, remove the channel pointer from struct ieee80211_tx_data and also assign it properly, depending on context, to the correct operating or current channel. Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Johannes Berg 提交于
When sending probe requests, e.g. during software scanning, these will go out on the *current* channel, so their IEs need to be built from the current channel. At other times, e.g. for beacons or probe request templates, the IEs will be used on the *operating* channel and using the current channel instead might result in errors. Add the appropriate parameters to respect the difference. Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Johannes Berg 提交于
Using hw.conf.channel is wrong as it could be the temporary channel if any function like the beacon get function is called while scanning or during other temporary out-of-channel activities. Use oper_channel instead. Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Johannes Berg 提交于
Using hw.conf.channel is wrong as it could be the temporary channel if any function like the beacon get function is called while scanning or during other temporary out-of-channel activities. Use oper_channel instead. Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Johannes Berg 提交于
Using hw.conf.channel is wrong as it could be the temporary channel if any function like the beacon get function is called while scanning or during other temporary out-of-channel activities. Use oper_channel instead. Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Johannes Berg 提交于
Using hw.conf.channel is wrong as it could be the temporary channel if any function like the beacon get function is called while scanning or during other temporary out-of-channel activities. Use oper_channel instead. Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Johannes Berg 提交于
There's no need to set up the channel during auth and again during assoc, just do it once. Currently this doesn't result in any changes since calling hw_config() with an unchanged channel will return early, but with the channel context work this has an impact on channel context assignment. Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Johannes Berg 提交于
In ieee80211_prep_connection(), the station (if not NULL) is the new station (representing the AP) that needs to be added. Rename the variable to "new_sta" to clarify this. Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Johannes Berg 提交于
If HT/VHT isn't supported by us we shouldn't print a message that we disabled it, do that only if the AP didn't support WMM and we therefore disable it. Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Thomas Huehn 提交于
Remove the control.sta pointer from ieee80211_tx_info to free up sufficient space in the TX skb control buffer for the upcoming Transmit Power Control (TPC). Instead, the pointer is now on the stack in a new control struct that is passed as a function parameter to the drivers' tx method. Signed-off-by: NThomas Huehn <thomas@net.t-labs.tu-berlin.de> Signed-off-by: NAlina Friedrichsen <x-alina@gmx.net> Signed-off-by: NFelix Fietkau <nbd@openwrt.org> [reworded commit message] Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Eliad Peller 提交于
Currently, ps mode is indicated per device (rather than per interface), which doesn't make a lot of sense. Moreover, there are subtle bugs caused by the inability to indicate ps change along with other changes (e.g. when the AP deauth us, we'd like to indicate CHANGED_PS | CHANGED_ASSOC, as changing PS before notifying about disassociation will result in null-packets being sent (if IEEE80211_HW_SUPPORTS_DYNAMIC_PS) while the sta is already disconnected.) Keep the current per-device notifications, and add parallel per-vif notifications. In order to keep it simple, the per-device ps and the per-vif ps are orthogonal - the per-vif ps configuration is determined only by the user configuration (enable/disable) and the connection state, and is not affected by other vifs state and (temporary) dynamic_ps/offchannel operations (unlike per-device ps). Signed-off-by: NEliad Peller <eliad@wizery.com> Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Arik Nemtsov 提交于
avoid using the skb CB for getting the appropriate sta. Signed-off-by: NArik Nemtsov <arik@wizery.com> Acked-by: NLuciano Coelho <coelho@ti.com> Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Arik Nemtsov 提交于
There was a bug hiding here since the hlid was sometimes inferred from the sta, which might be invalid at this point. Instead, propagate the hlid from the skb-queue where we got the skb in the first place. Signed-off-by: NArik Nemtsov <arik@wizery.com> Acked-by: NLuciano Coelho <coelho@ti.com> Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Vladimir Kondratiev 提交于
Remove ah-hoc IE search code found in the ieee80211_bss_get_ie() and use cfg80211_find_ie() instead. Signed-off-by: NVladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Emmanuel Grumbach 提交于
This doesn't make any sense since we are expected to be on the medium or at least to Tx only when we are on the right channel and the AP/GO can hear us. Move the call to mgd_prepare_tx() for deauth to be only done in case we're sending a deauth while not associated. Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Johannes Berg 提交于
If the HW is monitoring connection loss (as advertised by IEEE80211_HW_CONNECTION_MONITOR) but not filtering beacons (IEEE80211_VIF_BEACON_FILTER) then mac80211 will still start the beacon loss timer and if a few beacons are lost, e.g. due to scanning, drop the connection. If the hardware doesn't advertise connection monitoring, then it won't drop the connection right away but probe the AP, which is intended, but due to the logic in the timer when connection monitoring is done it assumes the connection was actually lost. Fix this problem by not starting the timer when the HW does connection monitoring. Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Mahesh Palivela 提交于
Insert VHT IEs into association frames to allow mac80211 to connect as a VHT client. Signed-off-by: NMahesh Palivela <maheshp@posedge.com> [clarify commit message] Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Chun-Yeow Yeoh 提交于
Rate control is re-initialized whenever a beacon from a mesh peer received, breaking the algorithms and resulting in low performance. Return early from mesh_peer_init if we already established a link with this peer to avoid this. Signed-off-by: NChun-Yeow Yeoh <yeohchunyeow@gmail.com> [clarify commit message] Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
- 28 7月, 2012 5 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4由 Linus Torvalds 提交于
Pull ext4 updates from Ted Ts'o: "The usual collection of bug fixes and optimizations. Perhaps of greatest note is a speed up for parallel, non-allocating DIO writes, since we no longer take the i_mutex lock in that case. For bug fixes, we fix an incorrect overhead calculation which caused slightly incorrect results for df(1) and statfs(2). We also fixed bugs in the metadata checksum feature." * tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (23 commits) ext4: undo ext4_calc_metadata_amount if we fail to claim space ext4: don't let i_reserved_meta_blocks go negative ext4: fix hole punch failure when depth is greater than 0 ext4: remove unnecessary argument from __ext4_handle_dirty_metadata() ext4: weed out ext4_write_super ext4: remove unnecessary superblock dirtying ext4: convert last user of ext4_mark_super_dirty() to ext4_handle_dirty_super() ext4: remove useless marking of superblock dirty ext4: fix ext4 mismerge back in January ext4: remove dynamic array size in ext4_chksum() ext4: remove unused variable in ext4_update_super() ext4: make quota as first class supported feature ext4: don't take the i_mutex lock when doing DIO overwrites ext4: add a new nolock flag in ext4_map_blocks ext4: split ext4_file_write into buffered IO and direct IO ext4: remove an unused statement in ext4_mb_get_buddy_page_lock() ext4: fix out-of-date comments in extents.c ext4: use s_csum_seed instead of i_csum_seed for xattr block ext4: use proper csum calculation in ext4_rename ext4: fix overhead calculation used by ext4_statfs() ...
-
git://git.linaro.org/people/rmk/linux-arm由 Linus Torvalds 提交于
Pull ARM updates from Russell King: "First ARM push of this merge window, post me coming back from holiday. This is what has been in linux-next for the last few weeks. Not much to say which isn't described by the commit summaries." * 'for-linus' of git://git.linaro.org/people/rmk/linux-arm: (32 commits) ARM: 7463/1: topology: Update cpu_power according to DT information ARM: 7462/1: topology: factorize the update of sibling masks ARM: 7461/1: topology: Add arch_scale_freq_power function ARM: 7456/1: ptrace: provide separate functions for tracing syscall {entry,exit} ARM: 7455/1: audit: move syscall auditing until after ptrace SIGTRAP handling ARM: 7454/1: entry: don't bother with syscall tracing on ret_from_fork path ARM: 7453/1: audit: only allow syscall auditing for pure EABI userspace ARM: 7452/1: delay: allow timer-based delay implementation to be selected ARM: 7451/1: arch timer: implement read_current_timer and get_cycles ARM: 7450/1: dcache: select DCACHE_WORD_ACCESS for little-endian ARMv6+ CPUs ARM: 7449/1: use generic strnlen_user and strncpy_from_user functions ARM: 7448/1: perf: remove arm_perf_pmu_ids global enumeration ARM: 7447/1: rwlocks: remove unused branch labels from trylock routines ARM: 7446/1: spinlock: use ticket algorithm for ARMv6+ locking implementation ARM: 7445/1: mm: update CONTEXTIDR register to contain PID of current process ARM: 7444/1: kernel: add arch-timer C3STOP feature ARM: 7460/1: remove asm/locks.h ARM: 7439/1: head.S: simplify initial page table mapping ARM: 7437/1: zImage: Allow DTB command line concatenation with ATAG_CMDLINE ARM: 7436/1: Do not map the vectors page as write-through on UP systems ...
-
由 Russell King 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty由 Linus Torvalds 提交于
Pull TTY/Serial patches from Greg Kroah-Hartman: "Here's the "tiny" set of patches for 3.6-rc1 for the tty layer and serial drivers. They were cherry-picked from the tty-next branch of the tty git tree, as they are small and "obvious" fixes. The larger changes, as mentioned before, will be saved for the 3.7-rc1 merge window. All of these changes have been in the linux-next releases for quite a while. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" * tag 'tty-3.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: pch_uart: Fix parity setting issue pch_uart: Fix rx error interrupt setting issue pch_uart: Fix missing break for 16 byte fifo tty ldisc: Close/Reopen race prevention should check the proper flag pch_uart: Add eg20t_port lock field, avoid recursive spinlocks vt: fix race in vt_waitactive() serial/of-serial: Add LPC3220 standard UART compatible string serial/8250: Add LPC3220 standard UART type serial_core: Update buffer overrun statistics. serial: samsung: Fixed wrong comparison for baudclk_rate
-
git://github.com/congwang/linux由 Linus Torvalds 提交于
Pull final kmap_atomic cleanups from Cong Wang: "This should be the final round of cleanup, as the definitions of enum km_type finally get removed from the whole tree. The patches have been in linux-next for a long time." * 'kmap_atomic' of git://github.com/congwang/linux: pipe: remove KM_USER0 from comments vmalloc: remove KM_USER0 from comments feature-removal-schedule.txt: remove kmap_atomic(page, km_type) tile: remove km_type definitions um: remove km_type definitions asm-generic: remove km_type definitions avr32: remove km_type definitions frv: remove km_type definitions powerpc: remove km_type definitions arm: remove km_type definitions highmem: remove the deprecated form of kmap_atomic tile: remove usage of enum km_type frv: remove the second parameter of kmap_atomic_primary() jbd2: remove the second argument of kmap_atomic
-
- 27 7月, 2012 17 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc由 Linus Torvalds 提交于
Pull powerpc fixes from Benjamin Herrenschmidt: "Here's a handful of powerpc patches, a couple of regression fixes for problems introduced in the main batch in this merge window, a couple of defconfig updates, and some trivials. The radeonfb one is something that was long standing in SLES which I forgot to pickup earlier." * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc/ftrace: Trace function graph entry before updating index radeonfb: Add quirk for the graphics adapter in some JSxx powerpc: Lack of firmware flash support is not an error powerpc: Enable pseries hardware RNG and crypto modules powerpc: Update g5_defconfig powerpc/kvm/bookehv: Fix build regression powerpc: Set stack limit properly in crit_transfer_to_handler
-
由 Linus Torvalds 提交于
Merge tag 'cpumask-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus Pull cpumask changes from Rusty Russell: "Trivial comment changes to cpumask code. I guess it's getting boring." Boring is good. * tag 'cpumask-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus: cpumask: cpulist_parse() comments correction init: add comments to keep initcall-names in sync with initcall levels cpumask: add a few comments of cpumask functions
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc由 Linus Torvalds 提交于
Pull ARM SoC fixes from Olof Johansson: "A mixed bag of fixes, some for merge window fallout (tegra, MXS), and a short series of fixes for marvell platforms that didn't make it in before 3.5." * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: mxs: fix compile error caused by prom_update_property change ARM: dt: tegra trimslice: enable USB2 port ARM: dt: tegra trimslice: add vbus-gpio property ARM: vt8500: Add maintainer for VT8500 architecture ARM: Kirkwood: Replace mrvl with marvell ARM: Orion: fix driver probe error handling with respect to clk ARM: Dove: Fixup ge00 initialisation ARM: Kirkwood: Fix PHY disable clk problems ARM: Kirkwood: Ensure runit clock always ticks. ARM: versatile: Don't use platform clock for Integrator & VE ARM: tegra: harmony: add regulator supply name and its input supply
-
git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds由 Linus Torvalds 提交于
Pull LED subsystem update from Bryan Wu. * 'for-3.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds: (50 commits) leds-lp8788: forgotten unlock at lp8788_led_work LEDS: propagate error codes in blinkm_detect() LEDS: memory leak in blinkm_led_common_set() leds: add new lp8788 led driver LEDS: add BlinkM RGB LED driver, documentation and update MAINTAINERS leds: max8997: Simplify max8997_led_set_mode implementation leds/leds-s3c24xx: use devm_gpio_request leds: convert Network Space v2 LED driver to devm_kzalloc() and cleanup error exit path leds: convert DAC124S085 LED driver to devm_kzalloc() leds: convert LM3530 LED driver to devm_kzalloc() and cleanup error exit path leds: convert TCA6507 LED driver to devm_kzalloc() leds: convert Freescale MC13783 LED driver to devm_kzalloc() and cleanup error exit path leds: convert ADP5520 LED driver to devm_kzalloc() and cleanup error exit path leds: convert PCA955x LED driver to devm_kzalloc() and cleanup error exit path leds: convert Sun Fire LED driver to devm_kzalloc() and cleanup error exit path leds: convert PCA9532 LED driver to devm_kzalloc() leds: convert LT3593 LED driver to devm_kzalloc() leds: convert Renesas TPU LED driver to devm_kzalloc() and cleanup error exit path leds: convert LP5523 LED driver to devm_kzalloc() and cleanup error exit path leds: convert PCA9633 LED driver to devm_kzalloc() ...
-
由 Steven Rostedt 提交于
As Colin Cross ported my x86 change to ARM, he also pointed out that powerpc is also behind in this fix. The commit 722b3c74 "ftrace/graph: Trace function entry before updating index" fixes an issue with function graph tracing for x86, where if the called entry function decides not to trace interrupts, it can fail the check if an interrupt comes in just after the curr_ret_stack is updated. The solution is to call the entry function first, then update the curr_ret_stack if the entry function wants to be traced. Cc: Colin Cross <ccross@android.com> Signed-off-by: NSteven Rostedt <rostedt@goodmis.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Tony Breeds 提交于
These devices are set to 640x480 by firmware, switch them to 800x600@60 so that the graphical installer can run on remote console. Reported by IBM during SLES10 SP2 beta testing: https://bugzilla.novell.com/show_bug.cgi?id=461002 LTC50817 Signed-off-by: NOlaf Hering <olaf@aepfle.de> Signed-off-by: NTony Breeds <tony@bakeyournoodle.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Anton Blanchard 提交于
Reduce the severity of the warning given when firmware flash is not supported. Not all platforms have it. Signed-off-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Anton Blanchard 提交于
Enable the hardware RNG and crypto modules. I verified they both autoload via the VIO subsystem, so there is no need to build them in. Signed-off-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Benjamin Herrenschmidt 提交于
This updates the g5 defconfig to include nouveau instead of nvidiafb (which works much better nowadays, in fact the latter crashes on modern distros), and to set CONFIG_VT_HW_CONSOLE_BINDING without which takeover from the firmware offb by nouveau doesn't work properly (and leads to unexplained black screens for some users). The rest is churn of going through defconfig / savedefconfig Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Alexander Graf 提交于
After merging the register type check patches from Ben's tree, the hv enabled booke implementation ceased to compile. This patch fixes things up so everyone's happy again. Signed-off-by: NAlexander Graf <agraf@suse.de> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Stuart Yoder 提交于
Commit 9778b696 incorrectly changes the code setting the stack limit on entry to the kernel to mark the thread_info at the bottom of the stack out of bounds anymore. This fixes it. Signed-off-by: NStuart Yoder <stuart.yoder@freescale.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc由 Linus Torvalds 提交于
Pull sparc updates from David Miller: "Nothing much this merge window for sparc. 1) Fix FPU state management in sparc32, from Tkhai Kirill. 2) More sparc32 mm layer code cleanups, largely more side effects of the sun4c support removal in the 3.5 From Sam Ravnborg. 3) Remove unused code in sparc64, from Bjorn Helgaas and Kirill Tkhai. 4) Some declaration and comment tidies in PROM support code, from Geert Uytterhoeven." * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: (24 commits) sparc32, copy_thread: Clear TIF_USEDFPU flag of created task instead of current sparc32: delete dead code in show_mem() sparc32: move kmap_init() to highmem.c sparc32: move probe_memory() to srmmu.c sparc32: drop unused BAD_PAGE stuff sparc32: centralize all mmu context handling in srmmu.c sparc32: drop quicklist sparc32: drop sparc model check in paging_init sparc32: drop sparc_unmapped_base sparc32,leon: drop leon_init() sparc32: drop fixmap.h sparc32: fixmap.h cleanup sparc32: drop unused kmap_atomic_to_page sparc32: drop swapper_pg_dir sparc32: beautify srmmu_inherit_prom_mappings() sparc32: use void * in nocache get/free sparc32: fix coding-style in srmmu.c sparc32: sort includes in srmmu.c sparc32: define a few srmmu functions __init sparc64: remove unused function straddles_64bit_va_hole() ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
Pull networking updates and fixes from David Miller: 1) Reinstate the no-ref optimization for input route lookups in ipv4 to fix some routing cache removal perf regressions. 2) Make TCP socket pre-demux work on ipv6 side too, from Eric Dumazet. 3) Get RX hash value from correct place in be2net driver, from Sarveshwar Bandi. 4) Validation of FIB cached routes missing critical check, from Eric Dumazet. 5) EEH support in mlx4 driver, from Kleber Sacilotto de Souza. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (23 commits) ipv6: Early TCP socket demux ipv4: Fix input route performance regression. pch_gbe: vlan skb len fix pch_gbe: add extra clean tx pch_gbe: fix transmit watchdog timeout ixgbe: fix panic while dumping packets on Tx hang with IOMMU be2net: Fix to parse RSS hash from Receive completions correctly. net/mlx4_en: Limit the RFS filter IDs to be < RPS_NO_FILTER hyperv: Add error handling to rndis_filter_device_add() hyperv: Add a check for ring_size value ipv4: rt_cache_valid must check expired routes net/pch_gpe: Cannot disable ethernet autonegation qeth: repair crash in qeth_l3_vlan_rx_kill_vid() netiucv: cleanup attribute usage net: wiznet add missing HAS_IOMEM dependency be2net: Missing byteswap in be_get_fw_log_level causes oops on PowerPC mlx4: Add support for EEH error recovery cdc-ncm: tag Ericsson WWAN devices (eg F5521gw) with FLAG_WWAN wanmain: comparing array with NULL caif: fix NULL pointer check ...
-
由 Stephen Rothwell 提交于
On powerpc, we don't get the implicit vmalloc.h include, and as a result the build fails noisily: fs/btrfs/send.c: In function 'fs_path_free': fs/btrfs/send.c:185:4: error: implicit declaration of function 'vfree' [-Werror=implicit-function-declaration] fs/btrfs/send.c: In function 'fs_path_ensure_buf': fs/btrfs/send.c:215:4: error: implicit declaration of function 'vmalloc' [-Werror=implicit-function-declaration] fs/btrfs/send.c:215:12: warning: assignment makes pointer from integer without a cast [enabled by default] fs/btrfs/send.c:225:12: warning: assignment makes pointer from integer without a cast [enabled by default] fs/btrfs/send.c:233:13: warning: assignment makes pointer from integer without a cast [enabled by default] fs/btrfs/send.c: In function 'iterate_dir_item': fs/btrfs/send.c:900:10: warning: assignment makes pointer from integer without a cast [enabled by default] fs/btrfs/send.c:909:11: warning: assignment makes pointer from integer without a cast [enabled by default] fs/btrfs/send.c: In function 'btrfs_ioctl_send': fs/btrfs/send.c:4463:17: warning: assignment makes pointer from integer without a cast [enabled by default] fs/btrfs/send.c:4469:17: warning: assignment makes pointer from integer without a cast [enabled by default] fs/btrfs/send.c:4475:2: error: implicit declaration of function 'vzalloc' [-Werror=implicit-function-declaration] fs/btrfs/send.c:4475:20: warning: assignment makes pointer from integer without a cast [enabled by default] fs/btrfs/send.c:4483:21: warning: assignment makes pointer from integer without a cast [enabled by default] Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Devendra Naga 提交于
at default case of switch we return with out unlocking the mutex. Signed-off-by: NDevendra Naga <develkernel412222@gmail.com> Signed-off-by: NBryan Wu <bryan.wu@canonical.com>
-
由 Dan Carpenter 提交于
Use the error codes from the lower levels instead of -ENODEV. Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Acked-by: NJan-Simon Möller <jansimon.moeller@gmx.de> Signed-off-by: NBryan Wu <bryan.wu@canonical.com>
-
由 Dan Carpenter 提交于
This can return without freeing the bl_work struct. Also there was no check for allocation failure. Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Acked-by: NJan-Simon Möller <jansimon.moeller@gmx.de> Signed-off-by: NBryan Wu <bryan.wu@canonical.com>
-