- 10 9月, 2009 5 次提交
-
-
由 Jesse Barnes 提交于
The current mp_bus_to_node array is initialized only by AMD specific code, since AMD platforms have registers that can be used for determining mode numbers. On new Intel platforms it's necessary to initialize this array as well though, otherwise all PCI node numbers will be 0, when in fact they should be -1 (indicating that I/O isn't tied to any particular node). So move the mp_bus_to_node code into the common PCI code, and initialize it early with a default value of -1. This may be overridden later by arch code (e.g. the AMD code). With this change, PCI consistent memory and other node specific allocations (e.g. skbuff allocs) should occur on the "current" node. If, for performance reasons, applications want to be bound to specific nodes, they should open their devices only after being pinned to the CPU where they'll run, for maximum locality. Acked-by: NYinghai Lu <yinghai@kernel.org> Tested-by: NJesse Brandeburg <jesse.brandeburg@gmail.com> Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
-
由 Jesse Barnes 提交于
yenta needs this for example. Acked-by: NMatthew Wilcox <willy@linux.intel.com> Reported-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
-
由 Matthew Wilcox 提交于
Instead of open-coding pci_find_parent_resource and request_resource, just call pci_claim_resource. Signed-off-by: NMatthew Wilcox <willy@linux.intel.com> Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
-
由 Matthew Wilcox 提交于
Instead of open-coding pci_find_parent_resource and request_resource, just call pci_claim_resource. Acked-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NMatthew Wilcox <willy@linux.intel.com> Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
-
由 Alex Chiang 提交于
This was #define'd as 0 on all platforms, so let's get rid of it. This change makes pci_scan_slot() slightly easier to read. Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Tony Luck <tony.luck@intel.com> Cc: David Howells <dhowells@redhat.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jeff Dike <jdike@addtoit.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Reviewed-by: NMatthew Wilcox <willy@linux.intel.com> Acked-by: NRussell King <linux@arm.linux.org.uk> Acked-by: NRalf Baechle <ralf@linux-mips.org> Acked-by: NKyle McMartin <kyle@mcmartin.ca> Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: NPaul Mundt <lethal@linux-sh.org> Acked-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NAlex Chiang <achiang@hp.com> Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
-
- 09 9月, 2009 3 次提交
-
-
由 Ed Cashin 提交于
Andy Whitcroft reported an oops in aoe triggered by use of an incorrectly initialised request_queue object: [ 2645.959090] kobject '<NULL>' (ffff880059ca22c0): tried to add an uninitialized object, something is seriously wrong. [ 2645.959104] Pid: 6, comm: events/0 Not tainted 2.6.31-5-generic #24-Ubuntu [ 2645.959107] Call Trace: [ 2645.959139] [<ffffffff8126ca2f>] kobject_add+0x5f/0x70 [ 2645.959151] [<ffffffff8125b4ab>] blk_register_queue+0x8b/0xf0 [ 2645.959155] [<ffffffff8126043f>] add_disk+0x8f/0x160 [ 2645.959161] [<ffffffffa01673c4>] aoeblk_gdalloc+0x164/0x1c0 [aoe] The request queue of an aoe device is not used but can be allocated in code that does not sleep. Bruno bisected this regression down to cd43e26f block: Expose stacked device queues in sysfs "This seems to generate /sys/block/$device/queue and its contents for everyone who is using queues, not just for those queues that have a non-NULL queue->request_fn." Addresses http://bugs.launchpad.net/bugs/410198 Addresses http://bugzilla.kernel.org/show_bug.cgi?id=13942 Note that embedding a queue inside another object has always been an illegal construct, since the queues are reference counted and must persist until the last reference is dropped. So aoe was always buggy in this respect (Jens). Signed-off-by: NEd Cashin <ecashin@coraid.com> Cc: Andy Whitcroft <apw@canonical.com> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Bruno Premont <bonbons@linux-vserver.org> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 Linus Torvalds 提交于
Reinette Chatre reports a frozen system (with blinking keyboard LEDs) when switching from graphics mode to the text console, or when suspending (which does the same thing). With netconsole, the oops turned out to be BUG: unable to handle kernel NULL pointer dereference at 0000000000000084 IP: [<ffffffffa03ecaab>] i915_driver_irq_handler+0x26b/0xd20 [i915] and it's due to the i915_gem.c code doing drm_irq_uninstall() after having done i915_gem_idle(). And the i915_gem_idle() path will do i915_gem_idle() -> i915_gem_cleanup_ringbuffer() -> i915_gem_cleanup_hws() -> dev_priv->hw_status_page = NULL; but if an i915 interrupt comes in after this stage, it may want to access that hw_status_page, and gets the above NULL pointer dereference. And since the NULL pointer dereference happens from within an interrupt, and with the screen still in graphics mode, the common end result is simply a silently hung machine. Fix it by simply uninstalling the irq handler before idling rather than after. Fixes http://bugzilla.kernel.org/show_bug.cgi?id=13819Reported-and-tested-by: NReinette Chatre <reinette.chatre@intel.com> Acked-by: NJesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Zhenyu Wang 提交于
eDP is exclusive connector too, and add missing crtc_mask setting for TV. This fixes http://bugzilla.kernel.org/show_bug.cgi?id=14139Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com> Reported-and-tested-by: NCarlos R. Mafra <crmafra2@gmail.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 08 9月, 2009 5 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6由 Linus Torvalds 提交于
* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm/radeon/kms: add LTE/GTE discard + rv515 two sided stencil register.
-
由 Linus Torvalds 提交于
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6: IMA: update ima_counts_put
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-2.6: pcmcia: add CNF-CDROM-ID for ide
-
git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel: agp/intel: support for new chip variant of IGDNG mobile drm/i915: Unref old_obj on get_fence_reg() error path drm/i915: increase default latency constant (v2 w/comment)
-
- 07 9月, 2009 2 次提交
-
-
由 Dave Airlie 提交于
This adds some rv350+ register for LTE/GTE discard, and enables the rv515 two sided stencil register. It also disables the DEPTHXY_OFFSET register which can be used to workaround the CS checker. Moves rs690 to proper place in rs600 and uses correct table on rs600. Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Mimi Zohar 提交于
- As ima_counts_put() may be called after the inode has been freed, verify that the inode is not NULL, before dereferencing it. - Maintain the IMA file counters in may_open() properly, decrementing any counter increments on subsequent errors. Reported-by: NCiprian Docan <docan@eden.rutgers.edu> Reported-by: NJ.R. Okajima <hooanon05@yahoo.co.jp> Signed-off-by: NMimi Zohar <zohar@us.ibm.com> Acked-by: Eric Paris <eparis@redhat.com Signed-off-by: NJames Morris <jmorris@namei.org>
-
- 06 9月, 2009 25 次提交
-
-
由 David S. Miller 提交于
Reported by Michael Guntsche <mike@it-loops.com> -------------------- Commit 38bddf04 gianfar: gfar_remove needs to call unregister_netdev() breaks the build of the gianfar driver because "dev" is undefined in this function. To quickly test rc9 I changed this to priv->ndev but I do not know if this is the correct one. -------------------- Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Linus Torvalds 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: firewire: sbp2: fix freeing of unallocated memory firewire: ohci: fix Ricoh R5C832, video reception firewire: ohci: fix Agere FW643 and multiple cameras firewire: core: fix crash in iso resource management
-
由 Roderick Colenbrander 提交于
This patch fixes a null pointer exception caused by removal of 'ack()' for level interrupts in the Xilinx interrupt driver. A recent change to the xilinx interrupt controller removed the ack hook for level irqs. Signed-off-by: NRoderick Colenbrander <thunderbird2k@gmail.com> Signed-off-by: NGrant Likely <grant.likely@secretlab.ca> Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.infradead.org/~dwmw2/mtd-2.6.31由 Linus Torvalds 提交于
* git://git.infradead.org/~dwmw2/mtd-2.6.31: JFFS2: add missing verify buffer allocation/deallocation mtd: nftl: fix offset alignments mtd: nftl: write support is broken mtd: m25p80: fix null pointer dereference bug
-
git://git.kernel.dk/linux-2.6-block由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: block: Allow changing max_sectors_kb above the default 512
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6由 Linus Torvalds 提交于
* 'fix/oxygen' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: sound: oxygen: handle cards with missing EEPROM sound: oxygen: fix MCLK rate for 192 kHz playback
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: tc: Fix unitialized kernel memory leak pkt_sched: Revert tasklet_hrtimer changes. net: sk_free() should be allowed right after sk_alloc() gianfar: gfar_remove needs to call unregister_netdev() ipw2200: firmware DMA loading rework
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: skcipher - Fix skcipher_dequeue_givcrypt NULL test
-
git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq由 Linus Torvalds 提交于
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq: [CPUFREQ] Re-enable cpufreq suspend and resume code
-
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6由 Linus Torvalds 提交于
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6: [IA64] fix csum_ipv6_magic() [IA64] Fix warning in dma-mapping.c
-
git://oss.sgi.com/xfs/xfs由 Linus Torvalds 提交于
* 'for-linus' of git://oss.sgi.com/xfs/xfs: xfs: actually enable the swapext compat handler
-
git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2: nilfs2: fix preempt count underflow in nilfs_btnode_prepare_change_key
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: percpu: don't assume existence of cpu0
-
git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6由 Linus Torvalds 提交于
* 'slab/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6: slub: Fix kmem_cache_destroy() with SLAB_DESTROY_BY_RCU
-
git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-2.6-dm由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-2.6-dm: dm snapshot: fix on disk chunk size validation dm exception store: split set_chunk_size dm snapshot: fix header corruption race on invalidation dm snapshot: refactor zero_disk_area to use chunk_io dm log: userspace add luid to distinguish between concurrent log instances dm raid1: do not allow log_failure variable to unset after being set dm log: remove incorrect field from userspace table output dm log: fix userspace status output dm stripe: expose correct io hints dm table: add more context to terse warning messages dm table: fix queue_limit checking device iterator dm snapshot: implement iterate devices dm multipath: fix oops when request based io fails when no paths
-
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: PCI SR-IOV: correct broken resource alignment calculations
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6: sparc64: Fix bootup with mcount in some configs. sparc64: Kill spurious NMI watchdog triggers by increasing limit to 30 seconds.
-
由 Linus Torvalds 提交于
Merge branch 'perfcounters-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perfcounters-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: perf_counter/powerpc: Fix cache event codes for POWER7 perf_counter: Fix /0 bug in swcounters perf_counters: Increase paranoia level
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: atkbd - add Compaq Presario R4000-series repeat quirk Input: i8042 - add Acer Aspire 5536 to the nomux list
-
由 Nicolas Pitre 提交于
In ext2_rename(), dir_page is acquired through ext2_dotdot(). It is then released through ext2_set_link() but only if old_dir != new_dir. Failing that, the pkmap reference count is never decremented and the page remains pinned forever. Repeat that a couple times with highmem pages and all pkmap slots get exhausted, and every further kmap() calls end up stalling on the pkmap_map_wait queue at which point the whole system comes to a halt. Signed-off-by: NNicolas Pitre <nico@marvell.com> Acked-by: NTheodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2由 Linus Torvalds 提交于
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2: ocfs2: ocfs2_write_begin_nolock() should handle len=0 ocfs2: invalidate dentry if its dentry_lock isn't initialized.
-
由 Linus Torvalds 提交于
The whole write-room thing is something that is up to the _caller_ to worry about, not the pty layer itself. The total buffer space will still be limited by the buffering routines themselves, so there is no advantage or need in having pty_write() artificially limit the size somehow. And what happened was that the caller (the n_tty line discipline, in this case) may have verified that there is room for 2 bytes to be written (for NL -> CRNL expansion), and it used to then do those writes as two single-byte writes. And if the first byte written (CR) then caused a new tty buffer to be allocated, pty_space() may have returned zero when trying to write the second byte (LF), and then incorrectly failed the write - leading to a lost newline character. This should finally fix http://bugzilla.kernel.org/show_bug.cgi?id=14015Reported-by: NMikael Pettersson <mikpe@it.uu.se> Acked-by: NAlan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
When translating CR to CRNL in the n_tty line discipline, we did it as two tty_put_char() calls. Which works, but is stupid, and has caused problems before too with bad interactions with the write_room() logic. The generic USB serial driver had that problem, for example. Now the pty layer had similar issues after being moved to the generic tty buffering code (in commit d945cb9c: "pty: Rework the pty layer to use the normal buffering logic"). So stop doing the silly separate two writes, and do it as a single write instead. That's what the n_tty layer already does for the space expansion of tabs (XTABS), and it means that we'll now always have just a single write for the CRNL to match the single 'tty_write_room()' test, which hopefully means that the next time somebody screws up buffering, it won't cause weeks of debugging. Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Oleg Nesterov 提交于
Tom Horsley reports that his debugger hangs when it tries to read /proc/pid_of_tracee/maps, this happens since "mm_for_maps: take ->cred_guard_mutex to fix the race with exec" 04b836cbf19e885f8366bccb2e4b0474346c02d commit in 2.6.31. But the root of the problem lies in the fact that do_execve() path calls tracehook_report_exec() which can stop if the tracer sets PT_TRACE_EXEC. The tracee must not sleep in TASK_TRACED holding this mutex. Even if we remove ->cred_guard_mutex from mm_for_maps() and proc_pid_attr_write(), another task doing PTRACE_ATTACH should not hang until it is killed or the tracee resumes. With this patch do_execve() does not use ->cred_guard_mutex directly and we do not hold it throughout, instead: - introduce prepare_bprm_creds() helper, it locks the mutex and calls prepare_exec_creds() to initialize bprm->cred. - install_exec_creds() drops the mutex after commit_creds(), and thus before tracehook_report_exec()->ptrace_stop(). or, if exec fails, free_bprm() drops this mutex when bprm->cred != NULL which indicates install_exec_creds() was not called. Reported-by: NTom Horsley <tom.horsley@att.net> Signed-off-by: NOleg Nesterov <oleg@redhat.com> Acked-by: NDavid Howells <dhowells@redhat.com> Cc: Roland McGrath <roland@redhat.com> Cc: James Morris <jmorris@namei.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-