Adds a way for clock consumers to set maximum and minimum rates. This
can be used for thermal drivers to set minimum rates, or by misc.
drivers to set maximum rates to assure a minimum performance level.

Changes the signature of the determine_rate callback by adding the
parameters min_rate and max_rate.
Signed-off-by: NTomeu Vizoso <tomeu.vizoso@collabora.com>
Signed-off-by: NStephen Boyd <sboyd@codeaurora.org>
[sboyd@codeaurora.org: set req_rate in __clk_init]
Signed-off-by: NMichael Turquette <mturquette@linaro.org>
[mturquette@linaro.org: min/max rate for sun6i_ahb1_clk_determine_rate
                        migrated clk-private.h changes to clk.c]

Private clock framework data structures should be private, surprisingly.

Now that all platforms and drivers have been updated to remove static
initializations of struct clk and struct clk_core objects and all
references to clk-private.h have been removed we can move the
definitions of these structures into drivers/clk/clk.c and delete the
header.

Additionally the ugly DEFINE_CLK macros have been removed. Those were
used for static definitions of struct clk objects. That practice is no
longer allowed.

Finally __clk_init is staticized as it is no longer declared in any
header.
Reviewed-by: NStephen Boyd <sboyd@codeaurora.org>
Signed-off-by: NMichael Turquette <mturquette@linaro.org>

The X-Gene PCIe driver consumes clocks and does not provide them.
Replace usage of clk-private.h with clk.h.

Cc: Tanmay Inamdar <tinamdar@apm.com>
Signed-off-by: NMichael Turquette <mturquette@linaro.org>

Remove omap_clocks_register and dummy_ck. The former is not used anymore
now that the statically defined clk stuctures are replaced with proper
descriptors and registered with the framework.

The dummy clock in arch/arm/mach-omap2 is made redundant by the OMAP3+
clock data that migrated to drivers/clk.

An additional benefit to this clean-up is removing the references to
clk-private.h which will be removed.

Cc: Paul Walmsley <paul@pwsan.com>
Cc: Tero Kristo <t-kristo@ti.com>
Acked-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NMichael Turquette <mturquette@linaro.org>

Conflicts:
	arch/arm/mach-omap2/cclock3xxx_data.c

Moves clock state to struct clk_core, but takes care to change as little API as
possible.

struct clk_hw still has a pointer to a struct clk, which is the
implementation's per-user clk instance, for backwards compatibility.

The struct clk that clk_get_parent() returns isn't owned by the caller, but by
the clock implementation, so the former shouldn't call clk_put() on it.

Because some boards in mach-omap2 still register clocks statically, their clock
registration had to be updated to take into account that the clock information
is stored in struct clk_core now.
Signed-off-by: NTomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: NStephen Boyd <sboyd@codeaurora.org>
Tested-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NMichael Turquette <mturquette@linaro.org>
[mturquette@linaro.org: adapted clk_has_parent to struct clk_core
                        applied OMAP3+ DPLL fix from Tero & Tony]

This is no longer used for anything, thus it can be removed.
Signed-off-by: NTero Kristo <t-kristo@ti.com>
Acked-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NMichael Turquette <mturquette@linaro.org>

As the clock data is now available for the legacy boot also from the
clock driver, use this rather than the data under the mach folder.
This allows us to get rid of the old clock data completely.
Signed-off-by: NTero Kristo <t-kristo@ti.com>
Acked-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NMichael Turquette <mturquette@linaro.org>

As the legacy clock data is being moved under clock driver, the
clock data will be using the same low level infrastructure for
register accesses. This requires the clk_memmaps to be initialized
properly. This patch adds a support hook to the PRM driver to
initialize the mappings.
Signed-off-by: NTero Kristo <t-kristo@ti.com>
Acked-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NMichael Turquette <mturquette@linaro.org>

Introduces omap3 legacy clock data under clock driver. The clock data
is also in new format, which makes it possible to get rid of the
clk-private.h header. This patch also introduces SoC specific init
functions that shall be called from the low level init.

The data format used in this file has two possible evolution paths;
it can either be removed completely once no longer needed, or it will
be possible to retain the format and modify the TI clock driver to be
a loadable module at some point. The actual path to be followed
will be decided later.
Signed-off-by: NTero Kristo <t-kristo@ti.com>
Acked-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NMichael Turquette <mturquette@linaro.org>

Legacy clock data is initialized slightly differently compared to
DT clocks, thus add support for this.
Signed-off-by: NTero Kristo <t-kristo@ti.com>
Acked-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NMichael Turquette <mturquette@linaro.org>

Legacy clock data is initialized slightly differently compared to
DT clocks, thus add support for this.
Signed-off-by: NTero Kristo <t-kristo@ti.com>
Acked-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NMichael Turquette <mturquette@linaro.org>

Legacy clock data is initialized slightly differently compared to
DT clocks, thus add support for this.
Signed-off-by: NTero Kristo <t-kristo@ti.com>
Acked-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NMichael Turquette <mturquette@linaro.org>

Legacy clock data is initialized slightly differently compared to
DT clocks, thus add support for this. The interface clock descriptor
itself is overloading the gate clock descriptor, thus it needs to
be called from the gate setup.
Signed-off-by: NTero Kristo <t-kristo@ti.com>
Acked-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NMichael Turquette <mturquette@linaro.org>

Legacy clock data is initialialized slightly differently compared to
DT clocks, thus add support for this.
Signed-off-by: NTero Kristo <t-kristo@ti.com>
Acked-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NMichael Turquette <mturquette@linaro.org>

Legacy clock data is initialized slightly differently compared to
DT clocks, thus add support for this.
Signed-off-by: NTero Kristo <t-kristo@ti.com>
Acked-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NMichael Turquette <mturquette@linaro.org>

Legacy clock data for OMAP3 is being moved under clock driver, thus
base support for this is needed. This patch adds basic definitions for
clock init descriptors and core infrastructure for initialization,
which will be called from the OMAP3 clock init.
Signed-off-by: NTero Kristo <t-kristo@ti.com>
Acked-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NMichael Turquette <mturquette@linaro.org>

As it has never been used.
Signed-off-by: NTomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: NStephen Boyd <sboyd@codeaurora.org>
Signed-off-by: NMichael Turquette <mturquette@linaro.org>

As clk_unprepare_unused_subtree and clk_disable_unused_subtree are
always called with a valid struct clk.
Signed-off-by: NTomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: NStephen Boyd <sboyd@codeaurora.org>
Signed-off-by: NMichael Turquette <mturquette@linaro.org>

Currently a mix of clk-qoriq/qoriq-clk and no prefix is used
Signed-off-by: NEmil Medve <Emilian.Medve@Freescale.com>
Signed-off-by: NMichael Turquette <mturquette@linaro.org>

Where the memset() is not necessary
Signed-off-by: NEmil Medve <Emilian.Medve@Freescale.com>
Signed-off-by: NMichael Turquette <mturquette@linaro.org>

drivers/clk/clk-qoriq.c:59:22: warning: symbol 'cmux_ops' was not declared. Should it be static?
Signed-off-by: NEmil Medve <Emilian.Medve@Freescale.com>
Signed-off-by: NMichael Turquette <mturquette@linaro.org>

WARNING:OOM_MESSAGE: Possible unnecessary 'out of memory' message
+       if (!parent_names) {
+               pr_err("%s: could not allocate parent_names\n", __func__);

WARNING:OOM_MESSAGE: Possible unnecessary 'out of memory' message
+       if (!cmux_clk) {
+               pr_err("%s: could not allocate cmux_clk\n", __func__);

WARNING:OOM_MESSAGE: Possible unnecessary 'out of memory' message
+       if (!subclks) {
+               pr_err("%s: could not allocate subclks\n", __func__);

WARNING:OOM_MESSAGE: Possible unnecessary 'out of memory' message
+       if (!onecell_data) {
+               pr_err("%s: could not allocate onecell_data\n", __func__);
Signed-off-by: NEmil Medve <Emilian.Medve@Freescale.com>
Signed-off-by: NMichael Turquette <mturquette@linaro.org>

CHECK:ALLOC_SIZEOF_STRUCT: Prefer kzalloc(sizeof(*cmux_clk)...) over kzalloc(sizeof(struct cmux_clk)...)
+       cmux_clk = kzalloc(sizeof(struct cmux_clk), GFP_KERNEL);

CHECK:ALLOC_SIZEOF_STRUCT: Prefer kzalloc(sizeof(*onecell_data)...) over kzalloc(sizeof(struct clk_onecell_data)...)
+       onecell_data = kzalloc(sizeof(struct clk_onecell_data), GFP_KERNEL);
Signed-off-by: NEmil Medve <Emilian.Medve@Freescale.com>
Signed-off-by: NMichael Turquette <mturquette@linaro.org>

WARNING:ALLOC_WITH_MULTIPLY: Prefer kcalloc over kzalloc with multiply
+       subclks = kzalloc(sizeof(struct clk *) * count, GFP_KERNEL);
Signed-off-by: NEmil Medve <Emilian.Medve@Freescale.com>
Signed-off-by: NMichael Turquette <mturquette@linaro.org>

CHECK:PARENTHESIS_ALIGNMENT: Alignment should match open parenthesis
+       rc = of_property_read_string_index(np, "clock-output-names",
+                       0, &clk_name);

CHECK:PARENTHESIS_ALIGNMENT: Alignment should match open parenthesis
+               pr_err("Could not register clock provider for node:%s\n",
+                        np->name);

CHECK:PARENTHESIS_ALIGNMENT: Alignment should match open parenthesis
+               rc = of_property_read_string_index(np, "clock-output-names",
+                               i, &clk_name);

CHECK:PARENTHESIS_ALIGNMENT: Alignment should match open parenthesis
+               pr_err("Could not register clk provider for node:%s\n",
+                        np->name);
Signed-off-by: NEmil Medve <Emilian.Medve@Freescale.com>
Signed-off-by: NMichael Turquette <mturquette@linaro.org>

Move pxa25x clock drivers from arch/arm/mach-pxa to driver/clk.
In the move :
 - convert to new clock framework legacy clocks
 - provide clocks as before for platform data based boards
 - provide clocks through devicetree with clk-pxa-dt
Signed-off-by: NRobert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: NMichael Turquette <mturquette@linaro.org>

The CPU_2X clock does not have a classical in-kernel user, but is,
amongst other things, required for OCM and debug access. Make sure this
clock is not mistakenly disabled during boot up by enabling it in the
platform's clock driver.

Cc: stable@vger.kernel.org # 3.11+
Fixes: 0ee52b15 'clk: zynq: Add clock controller driver'
Signed-off-by: NSoren Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: NMichael Turquette <mturquette@linaro.org>

Merge tag 'sunxi-clocks-for-3.20' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into clk-next

Allwinner clock changes for 3.20

The set of clock changes for the 3.20 merge window, with mostly:
  - Some PLL fixes for the A80 and A31
  - The MMC custom phase functions are removed, and moved over to the generic
    phase API.
  - Add the A80 MMC clocks

Some DT changes slipped here as well, to preserve bisectability.

Merge tag 'v3.20-rockchip-clk1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into clk-next

The two big changes are the additional of the watchdog clock, which
we currently only "fake" as the clock gate control is living in a
very strange place, but the watchdog driver needs to read the clock
rate from it and the setting of rk3288 plls to slow mode upon suspend.

Other than that some more exported clocks and a CLK_SET_RATE_PARENT
flag for the uart clocks.

These modules don't need to include clk-private.h. Replace the
include with clk.h because these modules are clock consumers and
also include clk-provider.h in clk/ti.h because struct
clk_hw_omap has a struct clk_hw embedded in it.

Cc: Tero Kristo <t-kristo@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
Signed-off-by: NStephen Boyd <sboyd@codeaurora.org>
Reviewed-by: NPaul Walmsley <paul@pwsan.com>
Signed-off-by: NMichael Turquette <mturquette@linaro.org>

These drivers don't need to include clk-private.h. Remove the
include.
Signed-off-by: NStephen Boyd <sboyd@codeaurora.org>
Acked-by: NUlf Hansson <ulf.hansson@linaro.org>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NMichael Turquette <mturquette@linaro.org>

The phase setter and getter were not exported until now, which was causing
build breakages when callers were compiled as module. Export these two
functions.
Reported-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
Reviewed-by: NStephen Boyd <sboyd@codeaurora.org>
Signed-off-by: NMichael Turquette <mturquette@linaro.org>

Document the LPASS (low power audio subsystem) clock controller
found on Qualcomm devices.

Cc: <devicetree@vger.kernel.org>
Signed-off-by: NRajendra Nayak <rnayak@codeaurora.org>
Signed-off-by: NKumar Gala <galak@codeaurora.org>
Signed-off-by: NStephen Boyd <sboyd@codeaurora.org>
Signed-off-by: NMichael Turquette <mturquette@linaro.org>

Add an LCC driver for MSM8960/APQ8064 that supports the i2s,
slimbus, and pcm clocks.
Signed-off-by: NStephen Boyd <sboyd@codeaurora.org>
Tested-by: NKenneth Westfield <kwestfie@codeaurora.org>
Signed-off-by: NMichael Turquette <mturquette@linaro.org>

Add an LCC driver for IPQ806x that supports the i2s, S/PDIF, and
pcm clocks.
Signed-off-by: NRajendra Nayak <rnayak@codeaurora.org>
Signed-off-by: NKumar Gala <galak@codeaurora.org>
Signed-off-by: NJosh Cartwright <joshc@codeaurora.org>
[sboyd@codeaurora.org: Reworded commit text, added Kconfig
select, fleshed out Kconfig description a bit more, added pll4
configuration and reworked probe for it, added muxes, split out
dt-binding file]
Signed-off-by: NStephen Boyd <sboyd@codeaurora.org>
Tested-by: NKenneth Westfield <kwestfie@codeaurora.org>
Signed-off-by: NMichael Turquette <mturquette@linaro.org>

Add defines to make more human readable numbers for the lpass
clock controller found on IPQ806x SoCs. Also remove the PLL4
define in gcc to avoid #define conflicts because that clock
doesn't exist in gcc, instead it lives in lcc.
Signed-off-by: NRajendra Nayak <rnayak@codeaurora.org>
[sboyd@codeaurora.org: Split off into separate patch]
Signed-off-by: NStephen Boyd <sboyd@codeaurora.org>
Tested-by: NKenneth Westfield <kwestfie@codeaurora.org>
Signed-off-by: NMichael Turquette <mturquette@linaro.org>

Add support for muxes that use regmap instead of readl/writel
directly. We don't support as many features as clk-mux.c, but
this is good enough to support getting and setting parents.
Adding a table based lookup can be added in the future if needed.
Signed-off-by: NStephen Boyd <sboyd@codeaurora.org>
Tested-by: NKenneth Westfield <kwestfie@codeaurora.org>
Signed-off-by: NMichael Turquette <mturquette@linaro.org>

Add support for dividers that use regmap instead of readl/writel.
Signed-off-by: NJosh Cartwright <joshc@codeaurora.org>
Signed-off-by: NRajendra Nayak <rnayak@codeaurora.org>
[sboyd@codeaurora.org: Switch to using generic divider code, drop
enable/disable, reword commit text]
Signed-off-by: NStephen Boyd <sboyd@codeaurora.org>
Tested-by: NKenneth Westfield <kwestfie@codeaurora.org>
Signed-off-by: NMichael Turquette <mturquette@linaro.org>

Some devices don't use mmio to interact with dividers. Split out the
logic from the register read/write parts so that we can reuse the
division logic elsewhere.
Signed-off-by: NStephen Boyd <sboyd@codeaurora.org>
Tested-by: NKenneth Westfield <kwestfie@codeaurora.org>
Signed-off-by: NMichael Turquette <mturquette@linaro.org>