- 08 10月, 2009 6 次提交
-
-
由 Dave Airlie 提交于
Both r100/r600 had this wrong, use the macro to extract the register to relocate. Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Robert Noland 提交于
There is no need to assign vb before you know that space is available. [agd5f: adapted for kernel tree.] Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Dave Airlie 提交于
This is just a cleanup of the list macro usage. Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Jerome Glisse 提交于
For AGP to work unmapped access must cover VRAM & AGP as AGP is treated like VRAM by the GPU (ie physical address). This patch properly setup the virtual memory system aperture to cover AGP if AGP is enabled. It seems that there is memory corruption after resume when using AGP (RV770 seems unaffected thought). Version 2 just fix merge issue with updated AGP fallback patch. Signed-off-by: NJerome Glisse <jglisse@redhat.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Jerome Glisse 提交于
When GPU acceleration is not working with AGP try to fallback to non AGP GART (either PCI or PCIE GART). This should make KMS failure on AGP less painfull. We still need to find out what is wrong when AGP fails but at least user have a lot of more chances to get a working configuration with acceleration. This patch also cleanup R600/RV770 fallback path so they use same code as others asics. Version 2 factorize agp disabling logic to avoid code duplication and bugs. Signed-off-by: NJerome Glisse <jglisse@redhat.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Jerome Glisse 提交于
Bad generated header file leaded to use wrong register to check IRQ status and acknowledge them. Fix the header and use proper registers. Signed-off-by: NJerome Glisse <jglisse@redhat.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
- 07 10月, 2009 1 次提交
-
-
由 Roel Kluin 提交于
Duplicate bits set Signed-off-by: NRoel Kluin <roel.kluin@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
- 06 10月, 2009 2 次提交
-
-
由 Dave Airlie 提交于
the global refcount wasn't being increased after the first reference. this caused an oops on unload on a multi-gpu card. Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Dave Airlie 提交于
The previous patches had some unwanted side effects, I've fixed the lack of 32bpp working, and fixed up 16bpp so it should also work. this also adds the interface to allow the driver to set a preferred console depth so for example low memory rn50 can set it to 8bpp. It also catches 24bpp on cards that can't do it and forces 32bpp. Tested on r100/r600/i945. Signed-off-by: NDave Airlie <airlied@redhat.com>
-
- 05 10月, 2009 4 次提交
-
-
由 Dave Airlie 提交于
This adds support for the setcmap api and fixes the 8bpp support at least on radeon hardware. It adds a new load_lut hook which can be called once the color map is setup. Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Dave Airlie 提交于
Also add single crtc for RN50 chips. changes in v2: fix vblank init to respect single crtc flag fix r100 mode bandwidth to respect single crtc flag Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Zhao Yakui 提交于
We can get the corresponding info by adding the boot option of "drm.debug= 0x07". But On some boxes it will print the following message many times in course of moving mouse. In such case the useful DRM debug info will be flushed. >[drm:drm_mode_cursor_ioctl], Avoid using the DRM_DEBUG_KMS in drm_mode_cursor_ioctl. Signed-off-by: NZhao Yakui <yakui.zhao@intel.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
"Surround View" is an option in the system bios that enables the AMD IGP chip in conjunction with a discrete AMD card. However, since the IGP vbios is part of the system bios it is not accessible via the rom bar or the legacy vga location. When "Surround View" is enabled in the system bios, the system bios puts a copy of the IGP vbios image at the start of vram. This patch adds support for reading the vbios image out of vram on IGP cards. Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
- 02 10月, 2009 11 次提交
-
-
由 Jerome Glisse 提交于
Avivo hw have vblank interrupt in different place, fixes irq handling (especialy irq disabling while suspending or shuting down the module). Signed-off-by: NJerome Glisse <jglisse@redhat.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Jerome Glisse 提交于
R600 & RV770 family are all using atombios so remove dead code and print an error message if we fail to find a valid atombios. Signed-off-by: NJerome Glisse <jglisse@redhat.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Jerome Glisse 提交于
When acceleration doesn't work we should free associated memory and stop GPU block responsible for hardware acceleration so we don't waste resource or let think one component of the driver that a GPU feature is working/running while it doesn't actualy work. Signed-off-by: NJerome Glisse <jglisse@redhat.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Jerome Glisse 提交于
We were calling reset unconditionaly in the startup path this is bad we need to call GPU reset for a good reason as after reset the GPU is in unknown states. To avoid any more bad things to happen we now also unconditionaly reinitialize the GPU after reset. This patch fix few issues reported by different people regarding KMS & R6XX/RV7XX hw. Signed-off-by: NJerome Glisse <jglisse@redhat.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Jerome Glisse 提交于
This split write back buffer handling into 3 functions, wb_fini for cleanup, wb_enable/wb_disable for enabling/disabling write back used for suspend/resume. This should fix potential issue of letting the write back active before suspending. We need to allocate memory in wb_enable because we can only allocate once GART is running. Signed-off-by: NJerome Glisse <jglisse@redhat.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Jerome Glisse 提交于
This remove old init path and allow code cleanup, now all hw use the new init path, see top of radeon.h for description of this. Signed-off-by: NJerome Glisse <jglisse@redhat.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Jerome Glisse 提交于
New init path allow to simply asic initialization and make easier to trace what happen on each different asic. We are removing most callback. Do a massive RS600 register cleanup to clarify RS600 register, we are still bit fuzy on some register and waiting for more informations. I don't have hw to test, so this patch is a best effort to not break anythings and to try to improve things. Signed-off-by: NJerome Glisse <jglisse@redhat.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Jerome Glisse 提交于
Also cleanup register specific to RS690/RS740. Version 2 add missing header file for register, remove unecessary call to AGP function and fix an indentation bug. Signed-off-by: NJerome Glisse <jglisse@redhat.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Jerome Glisse 提交于
New init path allow to simply asic initialization and make easier to trace what happen on each different asic. We are removing most callback. More cleanup should happen latter to remove even more callback. Also cleanup register specific to R100,RV200,RV250. Version 2 correct the placement on IGP of the VRAM inside GPU address space to match the stollen RAM placement of IGP. Signed-off-by: NJerome Glisse <jglisse@redhat.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Jerome Glisse 提交于
Also cleanup register specific to R300. Signed-off-by: NJerome Glisse <jglisse@redhat.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Jerome Glisse 提交于
Also cleanup register specific to RS400/RS480. This patch also fix legacy VGA register used to disable VGA access we were programming wrong register. Now we should properly disable VGA on r100 up to rs400 asics. Note that RS400/RS480 resume is broken, it hangs the computer while reprogramming dynamic clock, doesn't work either without that patch. We need to spend more time investigating this issue. Version 2 of the patch remove dead code that was left commented out in the previous version. Version 3 correct the placement on IGP of the VRAM inside GPU address space to match the stollen RAM placement of IGP. Signed-off-by: NJerome Glisse <jglisse@redhat.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
- 29 9月, 2009 4 次提交
-
-
由 Jerome Glisse 提交于
Convert the r520 asic support to new init path, change are smaller than previous one as most of the architecture is now in place and more code sharing can happen btw various asics. Signed-off-by: NJerome Glisse <jglisse@redhat.com> Signed-off-by: NDave Airlie <airlied@linux.ie>
-
由 Jerome Glisse 提交于
Convert the rv515 asic support to new init path also add an explanation in radeon.h about the new init path. There is also few cleanups associated with this change (others asic calling rv515 helper functions). Signed-off-by: NJerome Glisse <jglisse@redhat.com> Signed-off-by: NDave Airlie <airlied@linux.ie>
-
由 Mikael Pettersson 提交于
Compiling the radeon DRM driver with !CONFIG_DEBUG_FS throws the following warnings: drivers/gpu/drm/radeon/radeon_ttm.c: In function 'radeon_ttm_debugfs_init': drivers/gpu/drm/radeon/radeon_ttm.c:714: warning: unused variable 'i' drivers/gpu/drm/radeon/radeon_ttm.c: At top level: drivers/gpu/drm/radeon/radeon_ttm.c:692: warning: 'radeon_mem_types_list' defined but not used drivers/gpu/drm/radeon/radeon_ttm.c:693: warning: 'radeon_mem_types_names' defined but not used Fix: move these variables inside the #if defined(CONFIG_DEBUG_FS) block in radeon_ttm_debugsfs_init(), which is the only place using them. Signed-off-by: NMikael Pettersson <mikpe@it.uu.se> Signed-off-by: NDave Airlie <airlied@linux.ie>
-
由 Mikael Pettersson 提交于
Compiling DRM throws the following warning if MAGIC_SYSRQ is disabled: drivers/gpu/drm/drm_fb_helper.c:101: warning: 'sysrq_drm_fb_helper_restore_op' defined but not used Fix: place sysrq_drm_fb_helper_restore_op and associated definitions inside #ifdef CONFIG_MAGIC_SYSRQ. Signed-off-by: NMikael Pettersson <mikpe@it.uu.se> Signed-off-by: NDave Airlie <airlied@linux.ie>
-
- 28 9月, 2009 3 次提交
-
-
由 Dave Airlie 提交于
The legacy r600 path shares code, but doesn't share quite enough to get the freeing correct. Free the pages here also. Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Dave Airlie 提交于
This initialises the fb helper with the connector helper, so that the fb cmdline code works for intel as well. Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alexey Dobriyan 提交于
* mark struct vm_area_struct::vm_ops as const * mark vm_ops in AGP code But leave TTM code alone, something is fishy there with global vm_ops being used. Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 26 9月, 2009 7 次提交
-
-
由 Alex Deucher 提交于
Need add reloc offset to the offset in the actual packet. Fixes use of the DRAW_INDEX packet by the 3D driver. [airlied: modified first one where idx_value == ib[idx+0] Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@linux.ie>
-
由 Alex Deucher 提交于
All we need to do on r6xx/r7xx is clear the RADEON_IS_AGP flag; the rest is handled in r600.c fixes fdo bug 23990: http://bugs.freedesktop.org/show_bug.cgi?id=23990Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@linux.ie>
-
由 Dave Airlie 提交于
Thanks to Michel for pointing this out to me, this is why I need to get more sleep, over complicate this a bit. Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
Provides support for anti-tearing functionality in the ddx. Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@linux.ie>
-
由 Alex Deucher 提交于
- fix offset of NOP packet for parsing - fix p->idx increments - fix bad mask when updating crtc vline info Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@linux.ie>
-
由 Alex Deucher 提交于
r6xx and r7xx was missing this. We don't support non-CPU accessible vram yet. Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@linux.ie>
-
由 Dave Airlie 提交于
If drivers don't init the fb helper on the connector, the cmdline code won't work, but it shouldn't crash either. Signed-off-by: NDave Airlie <airlied@redhat.com>
-
- 25 9月, 2009 2 次提交
-
-
由 Dave Airlie 提交于
this avoids reading back the IB on AGP, also it avoids the race where since we haven't fetched the page from the main IB and written it to the gpu one, reading back fetches 0. Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Amerigo Wang 提交于
Got lots of untracked files after compiling. These files are generated, thus should be ignored by git. Signed-off-by: NWANG Cong <amwang@redhat.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-