Introduce a table containing the pins and their jack-detection states
for avoiding the unnecessary verbs to check the pin status at each time.

When the unsol event is enabled via snd_hda_jack_detect_enable(), it
automatically adds the given NID to the table.  Then the driver supposes
that the codec driver will set the dirty flag appropariately when an
unsolicited event is invoked for that pin.

The behavior for reading other pins that aren't registered in the table
doesn't change.  Only the pins assigned to the table are cached, so far.

In near futre, this table can be extended to use the central place for
the unsolicited events of all pins, etc, and eventually include the
jack-detect kcontrols that replace the current input-jack stuff.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Create a new helper function snd_hda_get_pin_label() for getting a label
string for both input and output pins.  hda_get_input_pin_label() is
obsoleted by this function, and the callers are replaced appropriately
now by this patch.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Some stuff was moved from kernel.org to other places.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

It looks more natural and saves two lines of code.
Signed-off-by: NWu Fengguang <fengguang.wu@intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The Intel HDMI chips (ironlake at least) are found to have ~250ms delay
between the ELD_Valid=1 hotplug event is send and the ELD buffer becomes
actually readable. During the time the ELD buffer is mysteriously all 0.

Fix it by scheduling a delayed work to re-read ELD buffer after 300ms.
Signed-off-by: NWu Fengguang <fengguang.wu@intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

memset(eld) clears eld->proc_entry which will leak the struct
snd_info_entry when unloading module.

Fix it by
- memset only the fields before eld->eld_buffer
- set eld->eld_valid to true _after_ all eld fields have been filled

Cc: <stable@kernel.org>
Cc: Pierre-louis Bossart <pierre-louis.bossart@intel.com>
Acked-by: NStephen Warren <swarren@nvidia.com>
Signed-off-by: NWu Fengguang <fengguang.wu@intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

ALC880 model=lg-lw works fine with the auto-parser as is.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Translate ALC880 medion-rim static configs to the auto-parser with the
additional GPIO2 verb and COEF setup.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The ALC882 macpro and imac24 static configs can be transferred to the
auto-parser with the additional GPIO setup.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

In the commit [c3e837bb: ALSA: hda/realtek - Rewrite ALC882 acer-aspire-*
models with the auto-parser], the check of the model option got removed
mistakenly.  Re-added the board_config check again.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Remove unused variables.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

When the pin or the DAC doesn't support the stereo, create a mono
control instead of creating a stereo control blindly.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Having just one semicolon after a break statement is enough.
Signed-off-by: NJesper Juhl <jj@chaosbits.net>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Clean up and fix pwr_nids for 92HD71 / 73 / 83 family codecs; remove
pwr_mapping which was incorrect.

The original pwr_nids support of 92HD83xxx was incorrect and never
actually worked before.  Now we should have things working correctly
without having to hack by DID anymore.

It is also not necessary to explicitly turn on all the pins near the
beginning of patch_stac92hd83xxx() now, the pins will go though
initialization properly.

Tested on 92HD66 / 71 / 73 / 75 / 83 / 89 / 91 demo boards.
Signed-off-by: NCharles Chin <Charles.Chin@idt.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Use kmemdup rather than duplicating its implementation

The semantic patch that makes this change is available
in scripts/coccinelle/api/memdup.cocci.
Signed-off-by: NThomas Meyer <thomas@m3y3r.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Now we can move the big acer-aspire-* static quirks to the auto-paresr
with some additional pin-configs and verbs.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

So far the driver creates the multi-io jacks only when a single output
jack, i.e. no multiple speakers are assigned.  This patch adds the
similar multi-io detection even with multiple speakers are assigned
primarily, so that 5.1-speakers + HP/mic/LI combination can work.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

We disabled the check of NO_PRESENCE bit of the default pin-config
in commit f4419172 temporarily.  One problem was that the first
implementation was wrong -- the bit after the shift must be checked.
However, this would still give many regressions on machines with broken
BIOS.  They set this bit wrongly even on active pins.

A workaround is to check whether all pins contain this bit.  As far as
I've checked, broken BIOSen set this bit on all pins, no matter whether
active or not.  In such a case, the driver should ignore this bit check.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

When freeing the vmaster master element, we should release slave-links
properly, not only assumig that slaves will be freed soon later.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

When a virtual mater control is created, the driver looks for slave
elements from the assigned card instance.  But this may include the
elements of other codecs when multiple codecs are on the same HD-audio
bus.  This works at the first time, but it'll give Oops when it's once
freed and re-created via reconfig sysfs.

This patch changes the element-look-up strategy to limit only to the
mixer elements of the same codec.
Reported-by: NDavid Henningsson <david.henningsson@canonical.com>
Cc: <stable@kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Detection code improved by PCI SSID usage. VM optimization
now enabled only for known devcices (skip host devices forwarded
to VM by VT-d or same kind of technology).
For debug/troubleshooting purposes optimization can be
forced (on/off) by module parameter: "inside_vm" (boolean).

Known devices (PCI SSID):
1af4:1100: Reserved for KVM devices. Note this is not yet
           implemented for KVM's ICH/AC'97 emulation.
1ab8:xxxx: Parallels ICH/AC'97 emulated sound.

[ fixed a minor coding-style issue by tiwai]
Signed-off-by: NKonstantin Ozerkov <kozerkov@parallels.com>
Signed-off-by: NDenis V. Lunev <den@openvz.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This is refactoring patch: preparation for add improved detection code.
Now all detection code placed in one place.
Signed-off-by: NKonstantin Ozerkov <kozerkov@parallels.com>
Signed-off-by: NDenis V. Lunev <den@openvz.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Now we're touching the desktop static configs for ALC88x codecs.
These are mostly OK with the auto-parser, but some models need careful
handling; ALC889 intel mobo requires the COEF setup, and W2JC needs
GPIO1 and COEF.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

All ALC882 targa-* models can be replaced with the auto-parser just
with the additional GPIO3 setup.  And it's generically applied to all
MSI boards unless other quirks are present.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

No, I'm not Mr. Monk, but can't resist...
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The ALC882 model=acer-aspire requires the additional COEF setup.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This quirk is anyway not used any more, so no problem to remove.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This works well without any special handling with the auto-parser.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

These static configs are no longer needed by replacement with the
auto-parser.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Move these quitks to the auto-parser.  They just need some EAPD setups
in addition.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

These are working well with the auto-parser although they have
relatively complex setup.  Let's go forward.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Remove all ALC882 static configurations for all Lenovo and Haier-w66
quirks.  They work fine with the auto-parser now.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

These machines are working well with the auto-parser without static
configurations.  More diet.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

These models work fine with the auto-parser with the additional COEF
setup.  The iMac 7,1 (106b:3200) also uses the same quirk, so remove it
too.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Not only PCI SSIDs but also look through codec SSIDs for fix-up table
entries.  MacBook tend to give the same PCI SSID but unique codec SSIDs.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The ASUS EEE1601 works almost fine with the auto-parser but the static
configuration has a certain specific COEF verb.  Add this to the fix-up
list so that we can drop the whole EEE1601 static config from
alc882_quirks.c.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

It works well with the auto-parser and the default BIOS setup.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>