- 28 1月, 2008 7 次提交
-
-
由 Daniel Mack 提交于
This patch adds support for Toradex' PXA27x based Colibri module. It's kept as simple as possible to only provide basic functionality. A default config is also included. Signed-off-by: NDaniel Mack <daniel@caiaq.de> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Richard Purdie 提交于
This patch refactors the code in corgi_lcd.c moving it to the board specific corgi and spitz files where appropriate instead of the existing ifdef mess which hinders readability. Fix spitz_get_hsync_len() to call get_hsync_invperiod so pxafb can be compiled as a module. The confusing variables which represent the inverse horizintal sync period are renamed to "invperiod" consistently. An incorrect comment in corgi_ts.c is also corrected. Signed-off-by: NRichard Purdie <rpurdie@rpsys.net> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Robert Schwebel 提交于
This patch adds baseboard support for the phyCORE-PXA270 development kit (aka PCM-990). This example shows how to use some phyCORE-PXA270 CPU module features on a baseboard in a standard manner. It could be used as a starting point for custom baseboard development. V2: After comments by Eric Miao: - IRQ chained handler fixed - video/graphic support moved to separate patch - ifdef/endif hell reduced ;-) V3: After comments by Russell King - initialise the mmci platform data statically V4: After comments by Russell King - wrong return value in pcm990_mci_init() fixed Signed-off-by: NJuergen Beisert <j.beisert@pengutronix.de> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Robert Schwebel 提交于
This patch adds main support for the generic phyCORE-PXA270 CPU module (aka PCM-027). Its as generic as possible to support any kind of baseboard. Note: Neither the CPU module nor the pcm027.c implementation can work without a baseboard support. Baseboard support can be added by the PCM-990 or any custom variant. V2: After comments by Eric Miao: - Currently unsupported devices moved into separate patch - direct call of baseboard initialisation V3: After comments by Russell King - sort include files - setting RTC bit for power control removed - style problems fixed (discovered by checkpatch.pl) Signed-off-by: NJuergen Beisert <j.beisert@pengutronix.de> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 eric miao 提交于
Signed-off-by: Neric miao <eric.miao@marvell.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Philipp Zabel 提交于
This includes irda, gpio keys, pxafb, backlight, ohci and flash (read-only). Signed-off-by: NPhilipp Zabel <philipp.zabel@gmail.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Mike Rapoport 提交于
Add polling I2C transfer implementation for PXA I2C. This is needed for cases where I2C transactions have to occur at times interrups are disabled. Signed-off-by: NMike Rapoport <mike@compulab.co.il> Acked-by: Neric miao <eric.miao@marvell.com> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
- 26 1月, 2008 15 次提交
-
-
由 Russell King 提交于
Wakeup sources on PXA3 are enabled at two levels. First, the MFP configuration has to be set to enable which edges a specific pin will trigger a wakeup. The pin also has to be routed to a functional unit. Lastly, the functional unit must be enabled as a wakeup source in the appropriate AD*ER registers (AD2D0ER for standby resume.) This doesn't fit well with the IRQ wake scheme - we currently do a best effort conversion from IRQ numbers to functional unit wake enable bits. For instance, there's several USB client related enable bits but there's no corresponding IRQs to determine which you'd want. Conversely, there's a single enable bit covering several functional units. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 eric miao 提交于
There are two reasons for making the MFP configuration to be processor independent, i.e. removing the relationship of configuration bits with actual MFPR register settings: 1. power management sometimes requires the MFP to be configured differently when in run mode or in low power mode 2. for future integration of pxa{25x,27x} GPIO configurations The modifications include: 1. introducing of processor independent MFP configuration bits, as defined in [include/asm-arm/arch-pxa/mfp.h]: bit 0.. 9 - MFP Pin Number (1024 Pins Maximum) bit 10..12 - Alternate Function Selection bit 13..15 - Drive Strength bit 16..18 - Low Power Mode State bit 19..20 - Low Power Mode Edge Detection bit 21..22 - Run Mode Pull State and so on, 2. moving the processor dependent code from mfp.h into mfp-pxa3xx.h 3. cleaning up of the MFPR bit definitions 4. mapping of processor independent MFP configuration into processor specific MFPR register settings is now totally encapsulated within pxa3xx_mfp_config() 5. using of "unsigned long" instead of invented type of "mfp_cfg_t" according to Documentation/CodingStyle Chapter 5, usage of this in platform code will be slowly removed in later patches Signed-off-by: Neric miao <eric.miao@marvell.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 eric miao 提交于
pxa3xx_mfp_set_xxx() functions are originally provided for overwriting MFP configurations performed by pxa3xx_mfp_config(), the usage of such a dirtry trick is not recommended, since there is currently no user of these functions, they are safely removed Signed-off-by: Neric miao <eric.miao@marvell.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 eric miao 提交于
Signed-off-by: Neric miao <eric.miao@marvell.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
PXA3 has a different memory controller from PXA2 platforms. Avoid clashing definitions by moving the PXA2 definitions to pxa2xx-regs.h Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 eric miao 提交于
Signed-off-by: Neric miao <eric.miao@marvell.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Bridge Wu 提交于
This patch is to add the third mmc controller support _only_ for pxa310. On zylonite, the third controller support one slot. Signed-off-by: NBridge Wu <bridge.wu@marvell.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Bridge Wu 提交于
This patch is to add the second mmc controller support for pxa3xx. It's valid for pxa3[0|1|2]0. On zylonite, the second controller has no slot. Signed-off-by: NBridge Wu <bridge.wu@marvell.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Bridge Wu 提交于
This patchis to add the first mmc controller support for pxa3xx. It's valid for pxa3[0|1|2]0. On zylonite, the first controller supports two slots, this patch only support the first one right now. Signed-off-by: NBridge Wu <bridge.wu@marvell.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Philipp Zabel 提交于
FFUART and friends are already defined as __REG(x) in pxa-regs.h. Instead of redefining them here, we can just provide the __REG macro. Including asm/arch/hardware.h is not an option because this physical addresses are needed here. This is a fix for the compiler warnings generated by 4663/1. Signed-off-by: NPhilipp Zabel <philipp.zabel@gmail.com> Acked-by: NNicolas Pitre <nico@cam.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 eric miao 提交于
1. make pxa2xx_spi.c use ssp_request() and ssp_free() to get the common information of the designated SSP port. 2. remove those IRQ/memory request code, ssp_request() has done that for the driver 3. the SPI platform device is thus made psuedo, no resource (memory/IRQ) has to be defined, all will be retreived by ssp_request() 4. introduce ssp_get_clk_div() to handle controller difference in clock divisor setting 5. use clk_xxx() API for clock enable/disable, and clk_get_rate() to handle the different SSP clock frequency between different processors Signed-off-by: Neric miao <eric.miao@marvell.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 eric miao 提交于
1. change SSP register definitions from absolute virtual addresses to offsets 2. use __raw_writel()/__raw_readl() for functions of ssp_xxxx() Signed-off-by: Neric miao <eric.miao@marvell.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 eric miao 提交于
Signed-off-by: Neric miao <eric.miao@marvell.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 eric miao 提交于
1. define "struct ssp_device" for SSP information, which is requested and released by function ssp_request()/ssp_free() 2. modify the ssp_init() and ssp_exit() to use the interface Signed-off-by: Neric miao <eric.miao@marvell.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Philipp Zabel 提交于
Also, use existing register and bit definitions instead of numbers. Signed-off-by: NPhilipp Zabel <philipp.zabel@gmail.com> Acked-by: NNicolas Pitre <nico@cam.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 10 1月, 2008 1 次提交
-
-
由 Russell King 提交于
If only a single CPU type is selected, __cpu_is_xxx() doesn't use its argument. This causes the compiler to issue a warning about an unused variable in the parent function. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 08 12月, 2007 1 次提交
-
-
由 Michael Brunner 提交于
Fix CKEN register corruption in the PXA27x cold reset code located in sound/arm/pxa27x-ac97.c. The problem has been introduced with a pxa_set_cken() function change in linux 2.6.23. This patch is based on patch 4527/1 that fixes the same problem in the ASoC PXA-AC97 driver. Additionally a definition for the CKEN index value is added and applied to both PXA AC97 drivers. Signed-off-by: NMichael Brunner <mibru@gmx.de> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 30 11月, 2007 3 次提交
-
-
由 eric miao 提交于
Some platforms (e.g. Littleton) requires LCD PCLK drive strength to be higher than default to cope with the fast PCLK frequency. Signed-off-by: Neric miao <eric.miao@marvell.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 eric miao 提交于
Signed-off-by: Neric miao <eric.miao@marvell.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 eric miao 提交于
Signed-off-by: Neric miao <eric.miao@marvell.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 26 11月, 2007 3 次提交
-
-
由 eric miao 提交于
1. update default MFPR value to drive strength fast 3mA and edge detection logic disabled 2. update impacted MFP_CFG_xxx() macros Signed-off-by: Nbridge wu <bridge.wu@marvell.com> Signed-off-by: Neric miao <eric.miao@marvell.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 eric miao 提交于
Signed-off-by: Nbridge wu <bridge.wu@marvell.com> Signed-off-by: Neric miao <eric.miao@marvell.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 eric miao 提交于
add missing IRQ_xxx definitions for PXA3xx Signed-off-by: Neric miao <eric.miao@marvell.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 31 10月, 2007 1 次提交
-
-
由 eric miao 提交于
Signed-off-by: Neric miao <eric.miao@marvell.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 19 10月, 2007 1 次提交
-
-
由 Rafael J. Wysocki 提交于
Move the definition of 'struct pm_ops' and related functions from <linux/pm.h> to <linux/suspend.h> . There are, at least, the following reasons to do that: * 'struct pm_ops' is specifically related to suspend and not to the power management in general. * As long as 'struct pm_ops' is defined in <linux/pm.h>, any modification of it causes the entire kernel to be recompiled, which is unnecessary and annoying. * Some suspend-related features are already defined in <linux/suspend.h>, so it is logical to move the definition of 'struct pm_ops' into there. * 'struct hibernation_ops', being the hibernation-related counterpart of 'struct pm_ops', is defined in <linux/suspend.h> . Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl> Acked-by: NPavel Machek <pavel@ucw.cz> Cc: Len Brown <lenb@kernel.org> Cc: Greg KH <greg@kroah.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 17 10月, 2007 1 次提交
-
-
由 Hans J. Koch 提交于
This patch adds support for the other three palette formats possible with the PXA LCD controller. This is required on boards where an LCD is connected with all its 18 bits. With this patch, it's possible to use an 8-bit mode with 18-bit palette entries. This used to be possible in 2.4 kernels but disappeared in 2.6. With current kernels, you can only get wrong colours out of an LCD connected this way. Users can choose the palette format by doing something like this in their board definition: static struct pxafb_mach_info my_fb_info = { [...] .lccr3 = LCCR3_OutEnH | LCCR3_PixFlEdg | LCCR3_PDFOR_3, .lccr4 = LCCR4_PAL_FOR_2, [...] }; Signed-off-by: NHans J. Koch <hjk@linutronix.de> Signed-off-by: NAntonino Daplas <adaplas@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 16 10月, 2007 4 次提交
-
-
由 Mike Rapoport 提交于
This patch provides core support for CM-X270 platform. Signed-off-by: NMike Rapoport <mike@compulab.co.il> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
pxa_gpio_mode() is a universal call that fiddles with the GAFR (gpio alternate function register.) GAFR does not exist on PXA3 CPUs, but instead the alternate functions are controlled via the MFP support code. Platforms are expected to configure the MFP according to their needs in their platform support code rather than drivers. We extend this idea to the GAFR, and make the gpio_direction_*() functions purely operate on the GPIO level. This means platform support code is entirely responsible for configuring the GPIOs alternate functions on all PXA CPU types. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
Make the cpu_is_pxaXXX() macros define to zero when support for a particular CPU is disabled. This allows us to eliminate code for CPUs which aren't enabled. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 eric miao 提交于
Signed-off-by: Neric miao <eric.y.miao@gmail.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 13 10月, 2007 3 次提交
-
-
由 eric miao 提交于
This definition produces processor specific code in generic function pxa_gpio_mode(), thus creating inconsistencies for support of pxa25x and pxa27x in a single zImage. As David Brownell suggests, make it a run-time variable and initialize at run-time according to the number of GPIOs on the processor. For now the initialization happens in pxa_init_irq_gpio(), since there is already a parameter for that, besides, this is and MUST be earlier than any subsequent calls to pxa_gpio_mode(). Signed-off-by: Neric miao <eric.y.miao@gmail.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 eric miao 提交于
Extracted from patch by Eric Miao, this adds the cpu_is_xxx() macros for identifying PXA3 SoCs. Signed-off-by: Neric miao <eric.y.miao@gmail.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
Allow the generic clock support code to fiddle with the CKEN register and mark pxa_set_cken() deprecated. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-