Slowly working on pruning struct btree_op - the aim is for it to only
contain things that are actually necessary for traversing the btree.
Signed-off-by: NKent Overstreet <kmo@daterainc.com>

Making things less asynchronous that don't need to be - bch_journal()
only has to block when the journal or journal entry is full, which is
emphatically not a fast path. So make it a normal function that just
returns when it finishes, to make the code and control flow easier to
follow.
Signed-off-by: NKent Overstreet <kmo@daterainc.com>

More refactoring, and renaming.
Signed-off-by: NKent Overstreet <kmo@daterainc.com>

Try to improve some of the naming a bit to be more consistent, and also
improve the flow of control in request_write() a bit.
Signed-off-by: NKent Overstreet <kmo@daterainc.com>

More random refactoring.
Signed-off-by: NKent Overstreet <kmo@daterainc.com>

Some refactoring - better to explicitly pass stuff around instead of
having it all in the "big bag of state", struct btree_op. Going to prune
struct btree_op quite a bit over time.
Signed-off-by: NKent Overstreet <kmo@daterainc.com>

This was the main point of all this refactoring - now,
btree_insert_check_key() won't fail just because the leaf node happened
to be full.
Signed-off-by: NKent Overstreet <kmo@daterainc.com>

We'll often end up with a list of adjacent keys to insert -
because bch_data_insert() may have to fragment the data it writes.

Originally, to simplify things and avoid having to deal with corner
cases bch_btree_insert() would pass keys from this list one at a time to
btree_insert_recurse() - mainly because the list of keys might span leaf
nodes, so it was easier this way.

With the btree_insert_node() refactoring, it's now a lot easier to just
pass down the whole list and have btree_insert_recurse() iterate over
leaf nodes until it's done.
Signed-off-by: NKent Overstreet <kmo@daterainc.com>

The flow of control in the old btree insertion code was rather -
backwards; we'd recurse down the btree (in btree_insert_recurse()), and
then if we needed to split the keys to be inserted into the parent node
would be effectively returned up to btree_insert_recurse(), which would
notice there was more work to do and finish the insertion.

The main problem with this was that the full logic for btree insertion
could only be used by calling btree_insert_recurse; if you'd gotten to a
btree leaf some other way and had a key to insert, if it turned out that
node needed to be split you were SOL.

This inverts the flow of control so btree_insert_node() does _full_
btree insertion, including splitting - and takes a (leaf) btree node to
insert into as a parameter.

This means we can now _correctly_ handle cache misses - for cache
misses, we need to insert a fake "check" key into the btree when we
discover we have a cache miss - while we still have the btree locked.
Previously, if the btree node was full inserting a cache miss would just
fail.
Signed-off-by: NKent Overstreet <kmo@daterainc.com>

This is prep work for the reworked btree insertion code.

The way we set b->parent is ugly and hacky... the problem is, when
btree_split() or garbage collection splits or rewrites a btree node, the
parent changes for all its (potentially already cached) children.

I may change this later and add some code to look through the btree node
cache and find all our cached child nodes and change the parent pointer
then...
Signed-off-by: NKent Overstreet <kmo@daterainc.com>

Checking i->seq was redundant, because since ages ago we always
initialize the new bset when advancing b->written
Signed-off-by: NKent Overstreet <kmo@daterainc.com>

Originally I got this right... except that the divides didn't use
do_div(), which broke 32 bit kernels. When I went to fix that, I forgot
that the raid stripe size usually isn't a power of two... doh
Signed-off-by: NKent Overstreet <kmo@daterainc.com>

Works kind of like the ext4 setting, to panic or remount read only on
errors.
Signed-off-by: NKent Overstreet <kmo@daterainc.com>

The old asynchronous discard code was really a relic from when all the
allocation code was asynchronous - now that allocation runs out of a
dedicated thread there's no point in keeping around all that complicated
machinery.
Signed-off-by: NKent Overstreet <kmo@daterainc.com>

bch_keybuf_del() takes a spinlock that can't be taken in interrupt context -
whoops. Fortunately, this code isn't enabled by default (you have to toggle a
sysfs thing).
Signed-off-by: NKent Overstreet <kmo@daterainc.com>

Dirty data accounting wasn't quite right - firstly, we were adding the key we're
inserting after it could have merged with another dirty key already in the
btree, and secondly we could sometimes pass the wrong offset to
bcache_dev_sectors_dirty_add() for dirty data we were overwriting - which is
important when tracking dirty data by stripe.
Signed-off-by: NKent Overstreet <kmo@daterainc.com>
Cc: linux-stable <stable@vger.kernel.org> # >= v3.10

The options have to be passed space-separated and prefixed by "floppy=",
rather than separately and unprefixed.

This fixes <http://bugs.debian.org/726655>.
Signed-off-by: NBen Harris <bjh21@cam.ac.uk>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

My static checker complains correctly that this is potential NULL
dereference because debugfs functions return NULL on error.  They return
an ERR_PTR if they are configured out.

We don't need to check for ERR_PTR because if debugfs is stubbed out the
dummy functions won't complain about that.  We don't need to check the
values before calling debugfs_remove() because that accepts ERR_PTRs and
NULL pointers.

We don't need to set pkt->dfs_f_info to NULL in pkt_debugfs_dev_new()
because it was initialized with kzalloc() so I have removed that.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

When persistent grants were added they were always used, even if the
backend doesn't have this feature (there's no harm in always using the
same set of pages). This restores the old data path when the backend
doesn't have persistent grants, removing the burden of doing a memcpy
when it is not actually needed.
Signed-off-by: NRoger Pau Monné <roger.pau@citrix.com>
Reported-by: NFelipe Franciosi <felipe.franciosi@citrix.com>
Cc: Felipe Franciosi <felipe.franciosi@citrix.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: David Vrabel <david.vrabel@citrix.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
[v2: Fix up whitespace issues]

Cc: Akhil Bhansali <abhansali@stec-inc.com>
Cc: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Reorder placement of skd_construct(), skd_cons_sg_list(), skd_destruct()
and skd_free_sg_list() functions. Then remove no longer needed function
prototypes.

Cc: Akhil Bhansali <abhansali@stec-inc.com>
Cc: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

skdev->pdev and skdev->pdev->bus are always different than NULL in
skd_do_inq_page_da() so simplify the code accordingly.

Also cache skdev->pdev value in pdev variable while at it.

Cc: Akhil Bhansali <abhansali@stec-inc.com>
Cc: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

SKD_OMIT_FROM_SRC_DIST is never defined.

Cc: Akhil Bhansali <abhansali@stec-inc.com>
Cc: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

skdev->pdev is set to pdev twice in skd_pci_probe(), first time
through skd_construct() call and the second time directly in
the function. Remove the second assignment as it is not needed.

Cc: Akhil Bhansali <abhansali@stec-inc.com>
Cc: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Use <asm/unaligned.h> instead of <asm-generic/unaligned.h>.

Cc: Akhil Bhansali <abhansali@stec-inc.com>
Cc: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

This is not a SCSI host driver so remove SCSI subsystem specific
includes.

Cc: Akhil Bhansali <abhansali@stec-inc.com>
Cc: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Register block device in skd_pci_probe() instead of in skd_init() so it
is registered only if some devices are present (currently it is always
registered when the driver is loaded). Please note that this change
depends on the fact that register_blkdev(0, ...) never returns 0.

Cc: Akhil Bhansali <abhansali@stec-inc.com>
Cc: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

* change priority level from KERN_INFO to KERN_ERR
* add "skd: " prefix
* do minor CodingStyle fixes

Cc: Akhil Bhansali <abhansali@stec-inc.com>
Cc: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Cc: Akhil Bhansali <abhansali@stec-inc.com>
Cc: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

register_blkdev() is called before pci_register_driver() in skd_init()
so unregister_blkdev() should be called after pci_unregister_driver()
in skd_exit(). Fix it.

Cc: Akhil Bhansali <abhansali@stec-inc.com>
Cc: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Remove skd_flush_cmd structure and skd_flush_slab.
Remove skd_end_request wrapper around skd_end_request_blk.
Remove skd_requeue_request, use blk_requeue_request directly.
Cleanup some comments (remove "bio" info) and whitespace.
Signed-off-by: NMike Snitzer <snitzer@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Just call the block functions directly, don't wrap them
in skd helpers. With only one queueing model enabled, there's
no point in doing that.

Also kill the ->start_time and ->bio from the skd_request_context,
we don't use those anymore.
Signed-off-by: NJens Axboe <axboe@kernel.dk>

The skd driver has a selectable rq or bio based queueing model.
For 3.14, we want to turn this into a single blk-mq interface
instead. With the immutable biovecs being merged in 3.13, the
bio model would need patches to even work. So rip it out, with
a conversion pending for blk-mq in the next release.
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Fix to return -ENOMEM in the skd construct error handling
case instead of 0, as done elsewhere in this function.
Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

"elevator: Fix a race in elevator switching and md device initialization"
changed the semantics of elevator_init() in a way that now enforces to hold
the corresponding request queue's sysfs_lock when calling elevator_init()
to fix a race.
The patch did not convert the s390 dasd device driver which is the only
device driver which also calls elevator_init(). So add the missing locking.

Cc: Tomoki Sekiyama <tomoki.sekiyama@hds.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

A return value of 1 is interpreted as an error
Signed-off-by: NStephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Replaced DPRINTK() and VPRINTK() with pr_debug().
Signed-off-by: NRamprasad C <ramprasad.chinthekindi@hgst.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

This patch fixes checkpatch.pl errors for assignment in if condition.
It also removes unused readq / readl function calls.

As Andrew had disabled the compilation of drivers for 32 bit,
I have modified format specifiers in few VPRINTKs to avoid warnings
during 64 bit compilation.
Signed-off-by: NAkhil Bhansali <abhansali@stec-inc.com>
Reviewed-by: NRamprasad Chinthekindi <rchinthekindi@stec-inc.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

This patch fixes a possible Kernel Panic on driver load if
the configuration on the card is messed up or not yet set.
The driver could possible give a 32 bit unsigned all Fs to
the kernel as the device's block size.

Now we only write the block size to the kernel if the
configuration from the card is valid.

Also, driver version is being updated.
Signed-off-by: NPhilip J Kelleher <pjk1939@linux.vnet.ibm.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>