- 15 2月, 2016 2 次提交
-
-
由 Takashi Iwai 提交于
The commit [991f86d7: ALSA: hda - Flush the pending probe work at remove] introduced the sync of async probe work at remove for fixing the race. However, this may lead to another hangup when the module removal is performed quickly before starting the probe work, because it issues flush_work() and it's blocked forever. The workaround is to use cancel_work_sync() instead of flush_work() there. Fixes: 991f86d7 ('ALSA: hda - Flush the pending probe work at remove') Cc: <stable@vger.kernel.org> # v3.17+ Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
When multiple concurrent writes happen on the ALSA sequencer device right after the open, it may try to allocate vmalloc buffer for each write and leak some of them. It's because the presence check and the assignment of the buffer is done outside the spinlock for the pool. The fix is to move the check and the assignment into the spinlock. (The current implementation is suboptimal, as there can be multiple unnecessary vmallocs because the allocation is done before the check in the spinlock. But the pool size is already checked beforehand, so this isn't a big problem; that is, the only possible path is the multiple writes before any pool assignment, and practically seen, the current coverage should be "good enough".) The issue was triggered by syzkaller fuzzer. BugLink: http://lkml.kernel.org/r/CACT4Y+bSzazpXNvtAr=WXaL8hptqjHwqEyFA+VN2AWEx=aurkg@mail.gmail.comReported-by: NDmitry Vyukov <dvyukov@google.com> Tested-by: NDmitry Vyukov <dvyukov@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 13 2月, 2016 1 次提交
-
-
由 Andrey Konovalov 提交于
The 'umidi' object will be free'd on the error path by snd_usbmidi_free() when tearing down the rawmidi interface. So we shouldn't try to free it in snd_usbmidi_create() after having registered the rawmidi interface. Found by KASAN. Signed-off-by: NAndrey Konovalov <andreyknvl@gmail.com> Acked-by: NClemens Ladisch <clemens@ladisch.de> Cc: <stable@vger.kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 12 2月, 2016 1 次提交
-
-
由 Takashi Iwai 提交于
Merge tag 'asoc-fix-v4.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v4.5 A rather large batch of fixes here, almost all in the Intel driver. The changes that got merged in this merge window for Skylake were rather large and as well as issues that you'd expect in a large block of new code there were some problems created for older processors which needed fixing up. Things are largely settling down now hopefully.
-
- 11 2月, 2016 9 次提交
-
-
由 Mark Brown 提交于
Merge remote-tracking branches 'asoc/fix/rt5659', 'asoc/fix/sigmadsp', 'asoc/fix/simple', 'asoc/fix/wm5110' and 'asoc/fix/wm8960' into asoc-linus
-
由 Mark Brown 提交于
Merge remote-tracking branches 'asoc/fix/imx-spdif', 'asoc/fix/mtk', 'asoc/fix/mxs-saif', 'asoc/fix/qcom' and 'asoc/fix/rt286' into asoc-linus
-
由 Mark Brown 提交于
Merge remote-tracking branches 'asoc/fix/amd', 'asoc/fix/arizona', 'asoc/fix/dpcm', 'asoc/fix/dwc', 'asoc/fix/fsl' and 'asoc/fix/fsl-ssi' into asoc-linus
-
由 Mark Brown 提交于
-
由 Mark Brown 提交于
-
由 Mark Brown 提交于
-
由 Mark Brown 提交于
-
由 Richard Fitzgerald 提交于
When the FLL is in pseudo-fractional mode there is an additional limit on fref based on the fratio, to prevent aliasing around the Nyquist frequency. If fref exceeds this limit the refclk divider must be increased and the calculation tried again until a suitable combination of fref and fratio is found or we have to fall back to integer mode. This patch also adds some debug log prints around this code. Signed-off-by: NRichard Fitzgerald <rf@opensource.wolfsonmicro.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Pascal Huerst 提交于
Forwarding the return value of i2c_master_send, leads to errors later on, since i2c_master_send returns the number of bytes transmittet. Check for ret < 0 instead and return 0 otherwise. Signed-off-by: NPascal Huerst <pascal.huerst@gmail.com> Acked-by: NLars-Peter Clausen <lars@metafoo.de> Signed-off-by: NMark Brown <broonie@kernel.org>
-
- 10 2月, 2016 1 次提交
-
-
由 Takashi Iwai 提交于
-
- 09 2月, 2016 5 次提交
-
-
由 Takashi Iwai 提交于
snd_timer_user_read() has a potential race among parallel reads, as qhead and qused are updated outside the critical section due to copy_to_user() calls. Move them into the critical section, and also sanitize the relevant code a bit. Cc: <stable@vger.kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Geert Uytterhoeven 提交于
sound/firewire/digi00x/amdtp-dot.c:67: warning: type qualifiers ignored on function return type Drop the bogus "const" type qualifier on the return type of dot_scrt() to fix this. Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: NTakashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
The hda_jack_tbl entries are managed by snd_array for allowing multiple jacks. It's good per se, but the problem is that struct hda_jack_callback keeps the hda_jack_tbl pointer. Since snd_array doesn't preserve each pointer at resizing the array, we can't keep the original pointer but have to deduce the pointer at each time via snd_array_entry() instead. Actually, this resulted in the deference to the wrong pointer on codecs that have many pins such as CS4208. This patch replaces the pointer to the NID value as the search key. As an unexpected good side effect, this even simplifies the code, as only NID is needed in most cases. Cc: <stable@vger.kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
A slave timer element also unlinks at snd_timer_stop() but it takes only slave_active_lock. When a slave is assigned to a master, however, this may become a race against the master's interrupt handling, eventually resulting in a list corruption. The actual bug could be seen with a syzkaller fuzzer test case in BugLink below. As a fix, we need to take timeri->timer->lock when timer isn't NULL, i.e. assigned to a master, while the assignment to a master itself is protected by slave_active_lock. BugLink: http://lkml.kernel.org/r/CACT4Y+Y_Bm+7epAb=8Wi=AaWd+DYS7qawX52qxdCfOfY49vozQ@mail.gmail.com Cc: <stable@vger.kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
In snd_timer_notify1(), the wrong timer instance was passed for slave ccallback function. This leads to the access to the wrong data when an incompatible master is handled (e.g. the master is the sequencer timer and the slave is a user timer), as spotted by syzkaller fuzzer. This patch fixes that wrong assignment. BugLink: http://lkml.kernel.org/r/CACT4Y+Y_Bm+7epAb=8Wi=AaWd+DYS7qawX52qxdCfOfY49vozQ@mail.gmail.comReported-by: NDmitry Vyukov <dvyukov@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 08 2月, 2016 8 次提交
-
-
由 Vinod Koul 提交于
The match module lacked module license and description, so add it Acked-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: NVinod Koul <vinod.koul@intel.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Pierre-Louis Bossart 提交于
DPCM driver is recommended for BYT, CHT based platforms, so if CONFIG_SND_SST_IPC_ACPI is selected then don't compile the BYT Device IDs in common ACPI driver to avoid probe conflicts. Signed-off-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Acked-by: NJie Yang <yang.jie@intel.com> Signed-off-by: NVinod Koul <vinod.koul@intel.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Vinod Koul 提交于
The ACPI match module is common to all three drivers, HSW, SKL and Atom-DPCM driver. But Atom-DPCM driver does not use common sst code so we cannot include the common SST module in Atom-DPCM driver. So the solution is to have a independent sst-match-acpi module which helps in matching for all the three drivers. Now all driver can be inbuilt in a single image This patch really fixes the regression introduced by the commit 95f09801 ("ASoC: Intel: Move apci find machine routines") Acked-by: NJie Yang <yang.jie@intel.com> Acked-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: NVinod Koul <vinod.koul@intel.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Vinod Koul 提交于
This reverts commit dc901a35 ("ASoC: Intel: fix ACPI probe regression with Atom DPCM driver") as the fix prevented the probe on HSW/BDW if Atom-DPCM was selected Acked-by: NJie Yang <yang.jie@intel.com> Acked-by: NPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: NVinod Koul <vinod.koul@intel.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Takashi Iwai 提交于
Currently the selected timer backend is referred at any moment from the running PCM callbacks. When the backend is switched, it's possible to lead to inconsistency from the running backend. This was pointed by syzkaller fuzzer, and the commit [7ee96216: ALSA: dummy: Disable switching timer backend via sysfs] disabled the dynamic switching for avoiding the crash. This patch improves the handling of timer backend switching. It keeps the reference to the selected backend during the whole operation of an opened stream so that it won't be changed by other streams. Together with this change, the hrtimer parameter is reenabled as writable now. NOTE: this patch also turned out to fix the still remaining race. Namely, ops was still replaced dynamically at dummy_pcm_open: static int dummy_pcm_open(struct snd_pcm_substream *substream) { .... dummy->timer_ops = &dummy_systimer_ops; if (hrtimer) dummy->timer_ops = &dummy_hrtimer_ops; Since dummy->timer_ops is common among all streams, and when the replacement happens during accesses of other streams, it may lead to a crash. This was actually triggered by syzkaller fuzzer and KASAN. This patch rewrites the code not to use the ops shared by all streams any longer, too. BugLink: http://lkml.kernel.org/r/CACT4Y+aZ+xisrpuM6cOXbL21DuM0yVxPYXf4cD4Md9uw0C3dBQ@mail.gmail.comReported-by: NDmitry Vyukov <dvyukov@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Linus Torvalds 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc由 Linus Torvalds 提交于
Pull ARM SoC fixes from Olof Johansson: "The first real batch of fixes for this release cycle, so there are a few more than usual. Most of these are fixes and tweaks to board support (DT bugfixes, etc). I've also picked up a couple of small cleanups that seemed innocent enough that there was little reason to wait (const/ __initconst and Kconfig deps). Quite a bit of the changes on OMAP were due to fixes to no longer write to rodata from assembly when ARM_KERNMEM_PERMS was enabled, but there were also other fixes. Kirkwood had a bunch of gpio fixes for some boards. OMAP had RTC fixes on OMAP5, and Nomadik had changes to MMC parameters in DT. All in all, mostly the usual mix of various fixes" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (46 commits) ARM: multi_v7_defconfig: enable DW_WATCHDOG ARM: nomadik: fix up SD/MMC DT settings ARM64: tegra: Add chosen node for tegra132 norrin ARM: realview: use "depends on" instead of "if" after prompt ARM: tango: use "depends on" instead of "if" after prompt ARM: tango: use const and __initconst for smp_operations ARM: realview: use const and __initconst for smp_operations bus: uniphier-system-bus: revive tristate prompt arm64: dts: Add missing DMA Abort interrupt to Juno bus: vexpress-config: Add missing of_node_put ARM: dts: am57xx: sbc-am57x: correct Eth PHY settings ARM: dts: am57xx: cl-som-am57x: fix CPSW EMAC pinmux ARM: dts: am57xx: sbc-am57x: fix UART3 pinmux ARM: dts: am57xx: cl-som-am57x: update SPI Flash frequency ARM: dts: am57xx: cl-som-am57x: set HOST mode for USB2 ARM: dts: am57xx: sbc-am57x: fix SB-SOM EEPROM I2C address ARM: dts: LogicPD Torpedo: Revert Duplicative Entries ARM: dts: am437x: pixcir_tangoc: use correct flags for irq types ARM: dts: am4372: fix irq type for arm twd and global timer ARM: dts: at91: sama5d4 xplained: fix phy0 IRQ type ...
-
git://git.linaro.org/landing-teams/working/fujitsu/integration由 Linus Torvalds 提交于
Pull mailbox fixes from Jassi Brar: - fix getting element from the pcc-channels array by simply indexing into it - prevent building mailbox-test driver for archs that don't have IOMEM * 'mailbox-devel' of git://git.linaro.org/landing-teams/working/fujitsu/integration: mailbox: Fix dependencies for !HAS_IOMEM archs mailbox: pcc: fix channel calculation in get_pcc_channel()
-
- 07 2月, 2016 3 次提交
-
-
由 Takashi Iwai 提交于
Some Sony VAIO AiO models (VGC-JS4EF and VGC-JS25G, both with PCI SSID 104d:9044) need the same quirk to make the speaker working properly. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=112031 Cc: <stable@vger.kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb由 Linus Torvalds 提交于
Pull USB fixes from Greg KH: "Here are some USB fixes for 4.5-rc3. The usual, xhci fixes for reported issues, combined with some small gadget driver fixes, and a MAINTAINERS file update. All have been in linux-next with no reported issues" * tag 'usb-4.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: xhci: harden xhci_find_next_ext_cap against device removal xhci: Fix list corruption in urb dequeue at host removal usb: host: xhci-plat: fix NULL pointer in probe for device tree case usb: xhci-mtk: fix AHB bus hang up caused by roothubs polling usb: xhci-mtk: fix bpkts value of LS/HS periodic eps not behind TT usb: xhci: apply XHCI_PME_STUCK_QUIRK to Intel Broxton-M platforms usb: xhci: set SSIC port unused only if xhci_suspend succeeds usb: xhci: add a quirk bit for ssic port unused usb: xhci: handle both SSIC ports in PME stuck quirk usb: dwc3: gadget: set the OTG flag in dwc3 gadget driver. Revert "xhci: don't finish a TD if we get a short-transfer event mid TD" MAINTAINERS: fix my email address usb: dwc2: Fix probe problem on bcm2835 Revert "usb: dwc2: Move reset into dwc2_get_hwparams()" usb: musb: ux500: Fix NULL pointer dereference at system PM usb: phy: mxs: declare variable with initialized value usb: phy: msm: fix error handling in probe.
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging由 Linus Torvalds 提交于
Pull staging and IIO driver fixes from Greg KH: "Here are some IIO and staging driver fixes for 4.5-rc3. All of them, except one, are for IIO drivers, and one is for a speakup driver fix caused by some earlier patches, to resolve a reported build failure" * tag 'staging-4.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: Staging: speakup: Fix allyesconfig build on mn10300 iio: dht11: Use boottime iio: ade7753: avoid uninitialized data iio: pressure: mpl115: fix temperature offset sign iio: imu: Fix dependencies for !HAS_IOMEM archs staging: iio: Fix dependencies for !HAS_IOMEM archs iio: adc: Fix dependencies for !HAS_IOMEM archs iio: inkern: fix a NULL dereference on error iio:adc:ti_am335x_adc Fix buffered mode by identifying as software buffer. iio: light: acpi-als: Report data as processed iio: dac: mcp4725: set iio name property in sysfs iio: add HAS_IOMEM dependency to VF610_ADC iio: add IIO_TRIGGER dependency to STK8BA50 iio: proximity: lidar: correct return value iio-light: Use a signed return type for ltr501_match_samp_freq()
-
- 06 2月, 2016 10 次提交
-
-
由 Linus Torvalds 提交于
Merge fixes from Andrew Morton: "22 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (22 commits) epoll: restrict EPOLLEXCLUSIVE to POLLIN and POLLOUT radix-tree: fix oops after radix_tree_iter_retry MAINTAINERS: trim the file triggers for ABI/API dax: dirty inode only if required thp: make deferred_split_scan() work again mm: replace vma_lock_anon_vma with anon_vma_lock_read/write ocfs2/dlm: clear refmap bit of recovery lock while doing local recovery cleanup um: asm/page.h: remove the pte_high member from struct pte_t mm, hugetlb: don't require CMA for runtime gigantic pages mm/hugetlb: fix gigantic page initialization/allocation mm: downgrade VM_BUG in isolate_lru_page() to warning mempolicy: do not try to queue pages from !vma_migratable() mm, vmstat: fix wrong WQ sleep when memory reclaim doesn't make any progress vmstat: make vmstat_update deferrable mm, vmstat: make quiet_vmstat lighter mm/Kconfig: correct description of DEFERRED_STRUCT_PAGE_INIT memblock: don't mark memblock_phys_mem_size() as __init dump_stack: avoid potential deadlocks mm: validate_mm browse_rb SMP race condition m32r: fix build failure due to SMP and MMU ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client由 Linus Torvalds 提交于
Pull Ceph fixes from Sage Weil: "We have a few wire protocol compatibility fixes, ports of a few recent CRUSH mapping changes, and a couple error path fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: libceph: MOSDOpReply v7 encoding libceph: advertise support for TUNABLES5 crush: decode and initialize chooseleaf_stable crush: add chooseleaf_stable tunable crush: ensure take bucket value is valid crush: ensure bucket id is valid before indexing buckets array ceph: fix snap context leak in error path ceph: checking for IS_ERR instead of NULL
-
git://people.freedesktop.org/~airlied/linux由 Linus Torvalds 提交于
Pull drm fixes from Dave Airlie: "Fixes all over the place: - amdkfd: two static checker fixes - mst: a bunch of static checker and spec/hw interaction fixes - amdgpu: fix Iceland hw properly, and some fiji bugs, along with some write-combining fixes. - exynos: some regression fixes - adv7511: fix some EDID reading issues" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (38 commits) drm/dp/mst: deallocate payload on port destruction drm/dp/mst: Reverse order of MST enable and clearing VC payload table. drm/dp/mst: move GUID storage from mgr, port to only mst branch drm/dp/mst: change MST detection scheme drm/dp/mst: Calculate MST PBN with 31.32 fixed point drm: Add drm_fixp_from_fraction and drm_fixp2int_ceil drm/mst: Add range check for max_payloads during init drm/mst: Don't ignore the MST PBN self-test result drm: fix missing reference counting decrease drm/amdgpu: disable uvd and vce clockgating on Fiji drm/amdgpu: remove exp hardware support from iceland drm/amdgpu: load MEC ucode manually on iceland drm/amdgpu: don't load MEC2 on topaz drm/amdgpu: drop topaz support from gmc8 module drm/amdgpu: pull topaz gmc bits into gmc_v7 drm/amdgpu: The VI specific EXE bit should only apply to GMC v8.0 above drm/amdgpu: iceland use CI based MC IP drm/amdgpu: move gmc7 support out of CIK dependency drm/amdgpu/gfx7: enable cp inst/reg error interrupts drm/amdgpu/gfx8: enable cp inst/reg error interrupts ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm由 Linus Torvalds 提交于
Pull power management and ACPI fixes from Rafael Wysocki: "These are: a fix for a recently introduced false-positive warnings about PM domain pointers being changed inappropriately (harmless but annoying), an MCH size workaround quirk for one more platform, a compiler warning fix (generic power domains framework), an ACPI LPSS (Intel SoCs) driver fixup and a cleanup of the ACPI CPPC core code. Specifics: - PM core fix to avoid false-positive warnings generated when the pm_domain field is cleared for a device that appears to be bound to a driver (Rafael Wysocki). - New MCH size workaround quirk for Intel Haswell-ULT (Josh Boyer). - Fix for an "unused function" compiler warning in the generic power domains framework (Ulf Hansson). - Fixup for the ACPI driver for Intel SoCs (acpi-lpss) to set the PM domain pointer of a device properly in one place that was overlooked by a recent PM core update (Andy Shevchenko). - Removal of a redundant function declaration in the ACPI CPPC core code (Timur Tabi)" * tag 'pm+acpi-4.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: PM: Avoid false-positive warnings in dev_pm_domain_set() PM / Domains: Silence compiler warning for an unused function ACPI / CPPC: remove redundant mbox_send_message() declaration ACPI / LPSS: set PM domain via helper setter PNP: Add Haswell-ULT to Intel MCH size workaround
-
由 Jason Baron 提交于
In the current implementation of the EPOLLEXCLUSIVE flag (added for 4.5-rc1), if epoll waiters create different POLL* sets and register them as exclusive against the same target fd, the current implementation will stop waking any further waiters once it finds the first idle waiter. This means that waiters could miss wakeups in certain cases. For example, when we wake up a pipe for reading we do: wake_up_interruptible_sync_poll(&pipe->wait, POLLIN | POLLRDNORM); So if one epoll set or epfd is added to pipe p with POLLIN and a second set epfd2 is added to pipe p with POLLRDNORM, only epfd may receive the wakeup since the current implementation will stop after it finds any intersection of events with a waiter that is blocked in epoll_wait(). We could potentially address this by requiring all epoll waiters that are added to p be required to pass the same set of POLL* events. IE the first EPOLL_CTL_ADD that passes EPOLLEXCLUSIVE establishes the set POLL* flags to be used by any other epfds that are added as EPOLLEXCLUSIVE. However, I think it might be somewhat confusing interface as we would have to reference count the number of users for that set, and so userspace would have to keep track of that count, or we would need a more involved interface. It also adds some shared state that we'd have store somewhere. I don't think anybody will want to bloat __wait_queue_head for this. I think what we could do instead, is to simply restrict EPOLLEXCLUSIVE such that it can only be specified with EPOLLIN and/or EPOLLOUT. So that way if the wakeup includes 'POLLIN' and not 'POLLOUT', we can stop once we hit the first idle waiter that specifies the EPOLLIN bit, since any remaining waiters that only have 'POLLOUT' set wouldn't need to be woken. Likewise, we can do the same thing if 'POLLOUT' is in the wakeup bit set and not 'POLLIN'. If both 'POLLOUT' and 'POLLIN' are set in the wake bit set (there is at least one example of this I saw in fs/pipe.c), then we just wake the entire exclusive list. Having both 'POLLOUT' and 'POLLIN' both set should not be on any performance critical path, so I think that's ok (in fs/pipe.c its in pipe_release()). We also continue to include EPOLLERR and EPOLLHUP by default in any exclusive set. Thus, the user can specify EPOLLERR and/or EPOLLHUP but is not required to do so. Since epoll waiters may be interested in other events as well besides EPOLLIN, EPOLLOUT, EPOLLERR and EPOLLHUP, these can still be added by doing a 'dup' call on the target fd and adding that as one normally would with EPOLL_CTL_ADD. Since I think that the POLLIN and POLLOUT events are what we are interest in balancing, I think that the 'dup' thing could perhaps be added to only one of the waiter threads. However, I think that EPOLLIN, EPOLLOUT, EPOLLERR and EPOLLHUP should be sufficient for the majority of use-cases. Since EPOLLEXCLUSIVE is intended to be used with a target fd shared among multiple epfds, where between 1 and n of the epfds may receive an event, it does not satisfy the semantics of EPOLLONESHOT where only 1 epfd would get an event. Thus, it is not allowed to be specified in conjunction with EPOLLEXCLUSIVE. EPOLL_CTL_MOD is also not allowed if the fd was previously added as EPOLLEXCLUSIVE. It seems with the limited number of flags to not be as interesting, but this could be relaxed at some further point. Signed-off-by: NJason Baron <jbaron@akamai.com> Tested-by: NMadars Vitolins <m@silodev.com> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Al Viro <viro@ftp.linux.org.uk> Cc: Eric Wong <normalperson@yhbt.net> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Hagen Paul Pfeifer <hagen@jauu.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Konstantin Khlebnikov 提交于
Helper radix_tree_iter_retry() resets next_index to the current index. In following radix_tree_next_slot current chunk size becomes zero. This isn't checked and it tries to dereference null pointer in slot. Tagged iterator is fine because retry happens only at slot 0 where tag bitmask in iter->tags is filled with single bit. Fixes: 46437f9a ("radix-tree: fix race in gang lookup") Signed-off-by: NKonstantin Khlebnikov <koct9i@gmail.com> Cc: Matthew Wilcox <willy@linux.intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ohad Ben-Cohen <ohad@wizery.com> Cc: Jeremiah Mahler <jmmahler@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
Commit ea8f8fc8 ("MAINTAINERS: add linux-api for review of API/ABI changes") added file triggers for various paths that likely indicated API/ABI changes. However, catching all changes in Documentation/ABI/ and include/uapi/ produces a large volume of mail to linux-api, rather than only API/ABI changes. Drop those two entries, but leave include/linux/syscalls.h and kernel/sys_ni.c to catch syscall-related changes. [josh@joshtriplett.org: redid changelog] Signed-off-by: NMichael Kerrisk <mtk.man-pages@gmail.com> Acked-by: NShuah khan <shuahkh@osg.samsung.com> Cc: Josh Triplett <josh@joshtriplett.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Dmitry Monakhov 提交于
Signed-off-by: NDmitry Monakhov <dmonakhov@openvz.org> Reviewed-by: NJan Kara <jack@suse.cz> Reviewed-by: NRoss Zwisler <ross.zwisler@linux.intel.com> Cc: Matthew Wilcox <matthew.r.wilcox@intel.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Kirill A. Shutemov 提交于
We need to iterate over split_queue, not local empty list to get anything split from the shrinker. Fixes: e3ae1953 ("thp: limit number of object to scan on deferred_split_scan()") Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Konstantin Khlebnikov 提交于
Sequence vma_lock_anon_vma() - vma_unlock_anon_vma() isn't safe if anon_vma appeared between lock and unlock. We have to check anon_vma first or call anon_vma_prepare() to be sure that it's here. There are only few users of these legacy helpers. Let's get rid of them. This patch fixes anon_vma lock imbalance in validate_mm(). Write lock isn't required here, read lock is enough. And reorders expand_downwards/expand_upwards: security_mmap_addr() and wrapping-around check don't have to be under anon vma lock. Link: https://lkml.kernel.org/r/CACT4Y+Y908EjM2z=706dv4rV6dWtxTLK9nFg9_7DhRMLppBo2g@mail.gmail.comSigned-off-by: NKonstantin Khlebnikov <koct9i@gmail.com> Reported-by: NDmitry Vyukov <dvyukov@google.com> Acked-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-