- 12 11月, 2013 7 次提交
-
-
由 Takashi Iwai 提交于
msnd_pinnacle.c is used for both snd-msnd-pinnacle and snd-msnd-classic drivers, and both should have different driver names. Using the same driver name results in the sysfs warning for duplicated entries like kobject: 'msnd-pinnacle.7' (cec33408): kobject_release, parent (null) (delayed) kobject: 'msnd-pinnacle' (cecd4980): kobject_release, parent cf3ad9b0 (delayed) ------------[ cut here ]------------ WARNING: CPU: 0 PID: 1 at fs/sysfs/dir.c:486 sysfs_warn_dup+0x7d/0xa0() sysfs: cannot create duplicate filename '/bus/isa/drivers/msnd-pinnacle' ...... Reported-by: NFengguang Wu <fengguang.wu@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Richard Fitzgerald 提交于
Pausing audio playback is not an illegal state so it doesn't seem sensible for poll() to return -EBADFD on a paused stream. There's also no reason to assume that we can't write more data to the DSP while playback is paused. Remove the -EBADFD so that a stream in paused state will still report the buffer availability from poll(). It is up to the user process to manage its state so that it knows whether it is paused or not. Signed-off-by: NRichard Fitzgerald <rf@opensource.wolfsonmicro.com> Acked-by VInod Koul <vinod.koul@intel.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Anssi Hannula 提交于
According to the HDA specification the baseline ELD length is counted in DW of 4 bytes instead of in bytes. Fix the code accordingly. Baseline length is not used by the kernel so only the ELD exported to userspace was affected. No issues have been reported. v2: Fixed so that eld_size is adjusted upwards accordingly as well. Signed-off-by: NAnssi Hannula <anssi.hannula@iki.fi> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Anssi Hannula 提交于
The ATI/AMD video/audio latencies are specified in apparent HDMI VSDB format. In this format values above 251 are not valid (or stream component is not supported - 255), but no checking is performed since this was not mentioned in the AMD HDA verbs specification. Check that the latencies are valid before using them, and add a comment describing the formats. Signed-off-by: NAnssi Hannula <anssi.hannula@iki.fi> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Anssi Hannula 提交于
Add error checks to HBR status reads (both generic and ATI/AMD) and ATI/AMD codec reads for ELD generation. Unchecked errors in these just caused more errors later on (invalid codec writes for the HBR ones and ELD parsing errors for the ATI/AMD ELD ones), but it is better to catch them earlier. Signed-off-by: NAnssi Hannula <anssi.hannula@iki.fi> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Anssi Hannula 提交于
According to USB Audio spec v2 bits 25 and 26 of bmChannelConfig are "Back Left of Center - BLC" and "Back Right of Center - BRC", respectively. They are currently assigned to ALSA channels BLC/BRC. However, the ALSA BLC/BRC are actually the rather nonsensical "bottom left center" and "bottom right center", so the channels will be assigned wrongly. The comments in the USB code are also similarly wrong, so this is not readily apparent without looking at the actual specification. Fix the channel mapping by mapping bits 25 and 26 to RLC (Rear Left Center) and RRC (Rear Right Center), respectively, instead. Signed-off-by: NAnssi Hannula <anssi.hannula@iki.fi> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Anssi Hannula 提交于
Channel map positions FLH, FCH, FRH duplicate positions TFL, TFC, TFR. Both are the speakers above the front speakers (CEA uses "high" and USB audio uses "top" nomenclature). Since the USB audio code has used the TFx positions since v3.8 (04324ccc, "ALSA: usb-audio: add channel map support") but the HDMI code only just started using FxH in a5b7d510 ("ALSA: hda - hdmi: Fix channel maps with less common speakers") which is not yet in any released kernel, standardize on TFx instead. Signed-off-by: NAnssi Hannula <anssi.hannula@iki.fi> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 11 11月, 2013 2 次提交
-
-
由 Wei Yongjun 提交于
Add the missing unlock before return from function snd_cs4231_playback_prepare() in the error handling case. Fixes: 5a19b178 ('ALSA: sparc/cs4231: Use WARN_ON() instead of BUG_ON()') Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
The SPDIF output MBP11,2 requires the pin control to be set/cleared for turning on/off the optical SPDIF. The red light turns off only when the corresponding pin control is cleared (or powered to D3). Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=64401Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 08 11月, 2013 31 次提交
-
-
由 Takashi Iwai 提交于
Merge tag 'asoc-v3.13-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Updates for v3.13 Some additional fixes for v3.13, the majority of which are removals and downgrades of BUG()s from Takashi.
-
由 Kailang Yang 提交于
New codec ALC255/ALC3234 support multifunction jacks. It used for menual select the input device. Signed-off-by: NKailang Yang <kailang@realtek.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
The commit [8fe7b65a: ALSA: hda - Apply GPIO setup for MacBooks with CS4208] added a fixup entry matching with the vendor id 0x106b. This broke the fixups for previous MBA6,1 and 6,2, since the PCI SSID vendor id matches before evaluating the codec SSIDs. We had a similar issue on Mac with Sigmatel codecs, and solve this problem again similarly, by introducing a skeleton entry matching with the all MacBooks, then remap to the right one. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=64401 Fixes: 8fe7b65a ('ALSA: hda - Apply GPIO setup for MacBooks with CS4208') Cc: <stable@vger.kernel.org> [v3.12+] Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Mark Brown 提交于
-
由 Mark Brown 提交于
-
由 Mark Brown 提交于
-
由 Mark Brown 提交于
-
由 Mark Brown 提交于
-
由 Mark Brown 提交于
-
由 Mark Brown 提交于
-
由 Mark Brown 提交于
-
由 Mark Brown 提交于
-
由 Mark Brown 提交于
-
由 Mark Brown 提交于
-
由 Mark Brown 提交于
-
由 Mark Brown 提交于
-
由 Mark Brown 提交于
-
由 Mark Brown 提交于
-
由 Mark Brown 提交于
-
由 Mark Brown 提交于
-
由 Mark Brown 提交于
-
由 Mark Brown 提交于
-
由 Mark Brown 提交于
-
由 Mark Brown 提交于
-
由 Mark Brown 提交于
-
由 Mark Brown 提交于
-
由 Mark Brown 提交于
-
由 Mark Brown 提交于
-
由 Mark Brown 提交于
-
由 Mark Brown 提交于
-
由 Mark Brown 提交于
-