- 17 11月, 2013 1 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random由 Linus Torvalds 提交于
Pull /dev/random changes from Ted Ts'o: "The /dev/random changes for 3.13 including a number of improvements in the following areas: performance, avoiding waste of entropy, better tracking of entropy estimates, support for non-x86 platforms that have a register which can't be used for fine-grained timekeeping, but which might be good enough for the random driver. Also add some printk's so that we can see how quickly /dev/urandom can get initialized, and when programs try to use /dev/urandom before it is fully initialized (since this could be a security issue). This shouldn't be an issue on x86 desktop/laptops --- a test on my Lenovo T430s laptop shows that /dev/urandom is getting fully initialized approximately two seconds before the root file system is mounted read/write --- this may be an issue with ARM and MIPS embedded/mobile systems, though. These printk's will be a useful canary before potentially adding a future change to start blocking processes which try to read from /dev/urandom before it is initialized, which is something FreeBSD does already for security reasons, and which security folks have been agitating for Linux to also adopt" * tag 'random_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random: random: add debugging code to detect early use of get_random_bytes() random: initialize the last_time field in struct timer_rand_state random: don't zap entropy count in rand_initialize() random: printk notifications for urandom pool initialization random: make add_timer_randomness() fill the nonblocking pool first random: convert DEBUG_ENT to tracepoints random: push extra entropy to the output pools random: drop trickle mode random: adjust the generator polynomials in the mixing function slightly random: speed up the fast_mix function by a factor of four random: cap the rate which the /dev/urandom pool gets reseeded random: optimize the entropy_store structure random: optimize spinlock use in add_device_randomness() random: fix the tracepoint for get_random_bytes(_arch) random: account for entropy loss due to overwrites random: allow fractional bits to be tracked random: statically compute poolbitshift, poolbytes, poolbits random: mix in architectural randomness earlier in extract_buf()
-
- 16 11月, 2013 15 次提交
-
-
由 Linus Torvalds 提交于
Commit 7d02c4d6 ("iommu/shmobile: Enable the driver on all ARM platforms") completely brokenly enabled the shmobile-iommu driver under COMPILE_TEST. It's bogus, because it won't compile anywhere else than ARM, since it tries to include <asm/dma-iommu.h>, which is very much ARM-only. So remove the bogus COMPILE_TEST dependency, which just causes allmodconfig to fail on non-ARM platforms. Cc: Joerg Roedel <joro@8bytes.org> Cc: iommu@lists.linux-foundation.org Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Cc: Simon Horman <horms@verge.net.au> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid由 Linus Torvalds 提交于
Pull HID updates from Jiri Kosina: - i2c-hid is not querying init reports any more, as it's not mandated by the spec, and annoys quite a few devices during enumeration, by Bibek Basu - a lot of fixes for Logitech devices, by Simon Wood - hid-apple now has an option to switch between Option and Command mode, by Nanno Langstraat - Some more workarounds for severely broken ELO devices, by Oliver Neukum - more devm conversions, by Benjamin Tissoires - wiimote correctness fixes, by David Herrmann - a lot of added support for various new device IDs and random small fixes here and there" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (34 commits) HID: enable Mayflash USB Gamecube Adapter HID: sony: Add force feedback support for Dualshock3 USB Input: usbtouchscreen: ignore eGalax/D-Wav/EETI HIDs HID: don't ignore eGalax/D-Wav/EETI HIDs HID: roccat: add missing special driver declarations HID:hid-lg4ff: Correct Auto-center strength for wheels other than MOMO and MOMO2 HID:hid-lg4ff: Initialize device properties before we touch autocentering. HID:hid-lg4ff: ensure ConstantForce is disabled when set to 0 HID:hid-lg4ff: Switch autocentering off when strength is set to zero. HID:hid-lg4ff: Scale autocentering force properly on Logitech wheel HID: roccat: fix Coverity CID 141438 HID: multitouch: add manufacturer to Kconfig help text HID: logitech-dj: small cleanup in rdcat() HID: remove self-assignment from hid_input_report HID: hid-sensor-hub: fix report size HID: i2c-hid: Stop querying for init reports HID: roccat: add support for Ryos MK keyboards HID: roccat: generalize some common code HID: roccat: add new device return value HID: wiimote: add pro-controller analog stick calibration ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial由 Linus Torvalds 提交于
Pull trivial tree updates from Jiri Kosina: "Usual earth-shaking, news-breaking, rocket science pile from trivial.git" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (23 commits) doc: usb: Fix typo in Documentation/usb/gadget_configs.txt doc: add missing files to timers/00-INDEX timekeeping: Fix some trivial typos in comments mm: Fix some trivial typos in comments irq: Fix some trivial typos in comments NUMA: fix typos in Kconfig help text mm: update 00-INDEX doc: Documentation/DMA-attributes.txt fix typo DRM: comment: `halve' -> `half' Docs: Kconfig: `devlopers' -> `developers' doc: typo on word accounting in kprobes.c in mutliple architectures treewide: fix "usefull" typo treewide: fix "distingush" typo mm/Kconfig: Grammar s/an/a/ kexec: Typo s/the/then/ Documentation/kvm: Update cpuid documentation for steal time and pv eoi treewide: Fix common typo in "identify" __page_to_pfn: Fix typo in comment Correct some typos for word frequency clk: fixed-factor: Fix a trivial typo ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input由 Linus Torvalds 提交于
Pull input updates from Dmitry Torokhov: "Updates for the input subsystem. You will get an new drivers for Hyper-V synthetic keyboard and for Neonode zForce touchscreens, plus a bunch of driver fixes and cleanups" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (49 commits) Revert "Input: ALPS - add support for model found on Dell XT2" arm: dts: am335x sk: add touchscreen support Input: ti_am335x_tsc - fix spelling mistake in TSC/ADC DT binding Input: cyttsp4 - replace IS_ERR and PTR_ERR with PTR_ERR_OR_ZERO Input: mma8450 - add missing i2c_set_clientdata() in mma8450_probe() Input: mpu3050 - add missing i2c_set_clientdata() in mpu3050_probe() Input: tnetv107x-keypad - make irqs signed for error handling Input: add driver for Neonode zForce based touchscreens Input: sh_keysc - enable the driver on all ARM platforms Input: remove a redundant max() call Input: mousedev - allow disabling even without CONFIG_EXPERT Input: allow deselecting serio drivers even without CONFIG_EXPERT Input: i8042 - add PNP modaliases Input: evdev - fall back to vmalloc for client event buffer Input: cypress_ps2 - do not consider data bad if palm is detected Input: cypress_ps2 - remove useless cast Input: fix PWM-related undefined reference errors Input: ALPS - change secondary device's name Input: wacom - not all multi-interface devices support touch Input: nspire-keypad - add missing clk_disable_unprepare() on error path ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-next由 Linus Torvalds 提交于
Pull MFD updates from Samuel Ortiz: "For the 3.13 merge window we have a couple of new drivers for the AMS AS3722 PMIC and for STMicroelectronics STw481x PMIC. Although this is a smaller update than usual, we also have: - Device tree support for the max77693 driver - linux/of.h inclusion for all DT compatible MFD drivers, to avoid build breakage in the future - Support for Intel Wildcat Point-LP PCH through the lpc_ich driver - A small arizona update for new wm5110 DSP registers and a few fixes - A small palmas update as well, including an of_device table addition and a few minor fixes - Two small mfd-core changes, one including a memory leak fix for when mfd_add_device() fails - Our usual round of minor cleanups and janitorial fixes" * tag 'mfd-3.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-next: (63 commits) Documentation: mfd: Update s2mps11.txt mfd: pm8921: Potential NULL dereference in pm8921_remove() mfd: Fix memory leak in mfd_add_devices() mfd: Stop setting refcounting pointers in original mfd_cell arrays mfd: wm5110: Enable micd clamp functionality mfd: lpc_ich: Add Device IDs for Intel Wildcat Point-LP PCH mfd: max77693: Fix up bug of wrong interrupt number mfd: as3722: Don't export the regmap config mfd: twl6040: Remove obsolete cleanup for i2c clientdata mfd: tps65910: Remove warning during dt node parsing mfd: lpc_sch: Ignore resource conflicts when adding mfd cells mfd: ti_am335x_tscadc: Avoid possible deadlock of reg_lock mfd: syscon: Return -ENOSYS if CONFIG_MFD_SYSCON is not enabled mfd: Add support for ams AS3722 PMIC mfd: max77693: Include linux/of.h header mfd: tc3589x: Detect the precise version mfd: omap-usb: prepare/unprepare clock while enable/disable mfd: max77686: Include linux/of.h header mfd: max8907: Include linux/of.h header mfd: max8997: Include linux/of.h header ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging由 Linus Torvalds 提交于
Pull hwmon fixes and updates from Jean Delvare: "All lm90 driver fixes and improvements" * 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: Documentation: dt: hwmon: Add OF document for LM90 hwmon: (lm90) Add power control hwmon: (lm90) Add support for TI TMP451 hwmon: (lm90) Use enums for the indexes of temp8 and temp11 hwmon: (lm90) Add support to handle IRQ hwmon: (lm90) Define status bits hwmon: (lm90) Fix max6696 alarm handling
-
git://git.kernel.dk/linux-block由 Linus Torvalds 提交于
Pull second round of block driver updates from Jens Axboe: "As mentioned in the original pull request, the bcache bits were pulled because of their dependency on the immutable bio vecs. Kent re-did this part and resubmitted it, so here's the 2nd round of (mostly) driver updates for 3.13. It contains: - The bcache work from Kent. - Conversion of virtio-blk to blk-mq. This removes the bio and request path, and substitutes with the blk-mq path instead. The end result almost 200 deleted lines. Patch is acked by Asias and Christoph, who both did a bunch of testing. - A removal of bootmem.h include from Grygorii Strashko, part of a larger series of his killing the dependency on that header file. - Removal of __cpuinit from blk-mq from Paul Gortmaker" * 'for-linus' of git://git.kernel.dk/linux-block: (56 commits) virtio_blk: blk-mq support blk-mq: remove newly added instances of __cpuinit bcache: defensively handle format strings bcache: Bypass torture test bcache: Delete some slower inline asm bcache: Use ida for bcache block dev minor bcache: Fix sysfs splat on shutdown with flash only devs bcache: Better full stripe scanning bcache: Have btree_split() insert into parent directly bcache: Move spinlock into struct time_stats bcache: Kill sequential_merge option bcache: Kill bch_next_recurse_key() bcache: Avoid deadlocking in garbage collection bcache: Incremental gc bcache: Add make_btree_freeing_key() bcache: Add btree_node_write_sync() bcache: PRECEDING_KEY() bcache: bch_(btree|extent)_ptr_invalid() bcache: Don't bother with bucket refcount for btree node allocations bcache: Debug code improvements ...
-
由 Jiri Kosina 提交于
Merge branches 'for-3.12/upstream-fixes', 'for-3.13/holtek', 'for-3.13/i2c-hid', 'for-3.13/logitech', 'for-3.13/multitouch', 'for-3.13/roccat', 'for-3.13/upstream' and 'for-3.13/wiimote' into for-linus
-
git://people.freedesktop.org/~airlied/linux由 Linus Torvalds 提交于
Pull drm regression fix from Dave Airlie: "Forgot this one liner was necessary to fix module reload issues introduced earlier in the drm pull" * 'drm-next' of git://people.freedesktop.org/~airlied/linux: drm: check for !kdev in drm_unplug_minor()
-
由 Linus Torvalds 提交于
Merge tag 'blackfin-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/realmz6/blackfin-linux Pull blackfin updates from Steven Miao: "Blackfin gpio changes, add adi pinctrl driver, and bug fixes" * tag 'blackfin-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/realmz6/blackfin-linux: blackfin: fix build warning for unused variable smp: bf561: and smb_wmb()/smp_rmb() at ipi send/receive pm: use GFP_ATOMIC when pm core call this function blackfin: serial: Add serial port_fer and port_mux early platform resources. blackfin: pinctrl-adi2: code cleanup after using pinctrl-adi2 blackfin: adi gpio driver and pinctrl driver support bf609: update default config for spi Blackfin: bfin_gpio: Use proper mask for comparing pfunc
-
git://git.openrisc.net/~jonas/linux由 Linus Torvalds 提交于
Pull OpenRISC updates from Jonas Bonn: - small cleanups to make allmodconfig pass - defconfig refresh - a handful of code sanitization patches * tag 'for-3.13' of git://git.openrisc.net/~jonas/linux: openrisc: Refactor or32_early_setup() openrisc: Remove unused declaration of __initramfs_start openrisc: Use the declarations provided by <asm/sections.h> openrisc: Refresh or1ksim_defconfig for v3.12 openrisc: Refactor 16-bit constant relocation openrisc: include: asm: Kbuild: add default "vga.h" openrisc: Makefile: append "-D__linux__" to KBUILD_CFLAGS
-
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild由 Linus Torvalds 提交于
Pull misc kbuild changes from Michal Marek: - make tags fixes again - scripts/show_delta fix for newer python - scripts/kernel-doc does not fail on unknown function prototype - one less coccinelle check this time * 'misc' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: scripts/tags.sh: remove obsolete __devinit[const|data] scripts/kernel-doc: make unknown function prototype a Warning instead of an Error show_delta: Update script to support python versions 2.5 through 3.3 scripts/coccinelle/api: remove devm_request_and_ioremap.cocci scripts/tags.sh: Increase identifier list
-
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild由 Linus Torvalds 提交于
Pull kconfig changes from Michal Marek: - xconfig stores its setting in a meaningful path (~/.config/kernel.org/qconf.conf) - kconfig symbol search fix - documentation fixes - cleanup & comment update - fix warning when a kconfig symbol is defined with two different types - Yann is now officially listed as maintainer of kconfig, but he prefers me to send pull requests for now * 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: MAINTAINERS: New kconfig maintainer xconfig: Fix the filename for GUI settings kconfig: fix bug in search results string: use strlen(gstr->s), not gstr->len kconfig: remove unused definition from scanner kconfig: adjust warning message for conflicting types kconfig: fix trivial typos and update mconf documentation kconfig: add short explanation to SYMBOL_WRITE Documentation/kbuild/kconfig.txt: 'make listnewconfig' replaces: yes "" | make oldconfig
-
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild由 Linus Torvalds 提交于
Pull kbuild changes from Michal Marek: - LTO fixes, but the kallsyms part had to be reverted - Pass -Werror=implicit-int and -Werror=strict-prototypes to the compiler by default - snprintf fix in modpost - remove GREP_OPTIONS from the environment to be immune against exotic grep option settings * 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: kallsyms: Revert back to 128 max symbol length Kbuild: Ignore GREP_OPTIONS env variable scripts: kallsyms: Use %zu to print 'size_t' scripts/bloat-o-meter: use .startswith rather than fragile slicing scripts/bloat-o-meter: ignore changes in the size of linux_banner kbuild: replace unbounded sprintf call in modpost kbuild, bloat-o-meter: fix static detection Kbuild: Handle longer symbols in kallsyms.c kbuild: Increase kallsyms max symbol length Makefile: enable -Werror=implicit-int and -Werror=strict-prototypes by default
-
git://linux-c6x.org/git/projects/linux-c6x-upstreaming由 Linus Torvalds 提交于
Pull Kconfig cleanups from Mark Salter: "Remove some unused config options from C6X and clean up PC_PARPORT dependencies. The latter was discussed here: https://lkml.org/lkml/2013/10/8/12" * tag 'for-linus' of git://linux-c6x.org/git/projects/linux-c6x-upstreaming: c6x: remove unused COMMON_CLKDEV Kconfig parameter Kconfig cleanup (PARPORT_PC dependencies) x86: select ARCH_MIGHT_HAVE_PC_PARPORT unicore32: select ARCH_MIGHT_HAVE_PC_PARPORT sparc: select ARCH_MIGHT_HAVE_PC_PARPORT sh: select ARCH_MIGHT_HAVE_PC_PARPORT powerpc: select ARCH_MIGHT_HAVE_PC_PARPORT parisc: select ARCH_MIGHT_HAVE_PC_PARPORT mips: select ARCH_MIGHT_HAVE_PC_PARPORT microblaze: select ARCH_MIGHT_HAVE_PC_PARPORT m68k: select ARCH_MIGHT_HAVE_PC_PARPORT ia64: select ARCH_MIGHT_HAVE_PC_PARPORT arm: select ARCH_MIGHT_HAVE_PC_PARPORT alpha: select ARCH_MIGHT_HAVE_PC_PARPORT c6x: remove unused parameter in Kconfig
-
- 15 11月, 2013 24 次提交
-
-
由 David Herrmann 提交于
We moved minor deallocation to drm_dev_free() in: commit 8f6599da Author: David Herrmann <dh.herrmann@gmail.com> Date: Sun Oct 20 18:55:45 2013 +0200 drm: delay minor destruction to drm_dev_free() However, this causes a call to drm_unplug_minor(), which should just do nothing as drm_dev_unregister() already called this. But a separate patch caused kdev lifetime changes: commit 5bdebb18 Author: Dave Airlie <airlied@redhat.com> Date: Fri Oct 11 14:07:25 2013 +1000 drm/sysfs: sort out minor and connector device object lifetimes. Thus making our dev_is_registered() call useles (and even segfault if it is NULL). Replace it with a simple !kdev test and we're fine. Reported-by: NHuax Lu <huax.lu@intel.com> Reported-by: NDaniel Vetter <daniel@ffwll.ch> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=71208Tested-by: Nlu hua <huax.lu@intel.com> Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: NDavid Herrmann <dh.herrmann@gmail.com> Signed-off-by: NDave Airlie <airlied@gmail.com>
-
由 Steven Miao 提交于
Signed-off-by: NSteven Miao <realmz6@gmail.com>
-
由 Steven Miao 提交于
add smb_wmb()/smp_rmb() to keep cache coherent Signed-off-by: NSteven Miao <realmz6@gmail.com>
-
由 Scott Jiang 提交于
We shouldn't sleep in atomic sections. Signed-off-by: NScott Jiang <scott.jiang.linux@gmail.com>
-
由 Sonic Zhang 提交于
The serial driver sets up port function manually in early platform probe stage if the ADI GPIO2 driver is used. Remove the bfin_sport_uart early platform devices. Signed-off-by: NSonic Zhang <sonic.zhang@analog.com>
-
由 Steven Miao 提交于
Signed-off-by: NSteven Miao <realmz6@gmail.com>
-
由 Geert Uytterhoeven 提交于
- Change fdt pointer (passed from head.S) from unsigned int to void *, which allows to kill a cast, and makes it compatible with __dtb_start. - Use pr_info(), - Extract common part. Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org> Cc: linux@lists.openrisc.net Signed-off-by: NJonas Bonn <jonas@southpole.se>
-
由 Wei Ni 提交于
Add OF document for LM90 in Documentation/devicetree/. [JD: Add this new file to the LM90 MAINTAINERS entry.] Signed-off-by: NWei Ni <wni@nvidia.com> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Wei Ni 提交于
The device lm90 can be controlled by the vcc rail. Adding the regulator support to power on/off the vcc rail. Enable the "vcc" regulator before accessing the device. [JD: Rename variables to avoid confusion with registers.] Signed-off-by: NWei Ni <wni@nvidia.com> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Wei Ni 提交于
TI TMP451 is mostly compatible with ADT7461, except for local temperature low byte and max conversion rate. Add support to the LM90 driver. Signed-off-by: NWei Ni <wni@nvidia.com> Reviewed-by: NGuenter Roeck <linux@roeck-us.net> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Wei Ni 提交于
Using enums for the indexes and nrs of temp8 and temp11. This make the code much more readable. Signed-off-by: NWei Ni <wni@nvidia.com> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Wei Ni 提交于
When the temperature exceed the limit range value, the driver can handle the interrupt. Signed-off-by: NWei Ni <wni@nvidia.com> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Wei Ni 提交于
Add bit defines for the status register. And add a function lm90_is_tripped() which will read status register and return tripped or not, then lm90_alert can call it directly, and in the future the IRQ thread also can use it. [JD: Adjusted to include all the new MAX6696 status flags.] Signed-off-by: NWei Ni <wni@nvidia.com> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Guenter Roeck 提交于
Bit 2 of status register 2 on MAX6696 (external diode 2 open) sets ALERT; the bit thus has to be listed in alert_alarms. Also display a message in the alert handler if the condition is encountered. Even though not all overtemperature conditions cause ALERT to be set, we should not ignore them in the alert handler. Display messages for all out-of-range conditions. Reported-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NGuenter Roeck <linux@roeck-us.net> Cc: stable@vger.kernel.org Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Geert Uytterhoeven 提交于
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: NJonas Bonn <jonas@southpole.se>
-
由 Geert Uytterhoeven 提交于
Openrisc's private vmlinux.h duplicates a few definitions that are already provided by asm-generic/sections.h. The former is used by setup.c only, while the latter is already used everywhere else. Convert setup.c to use the generic version: - Include <asm/sections.h>, - Remove the (slightly different) extern declarations, - Remove the no longer needed address-of ('&') operators. Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: NJonas Bonn <jonas@southpole.se>
-
由 Geert Uytterhoeven 提交于
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: NJonas Bonn <jonas@southpole.se>
-
由 Sonic Zhang 提交于
Remove gpio driver for new gpio controller on BF54x and BF60x. Build the bfin_gpio driver only when other BF5xx processors are selected. Replace the prefix of some gpio and peripheral functions with adi. add portmux platform data in machine portmux.h Signed-off-by: NSonic Zhang <sonic.zhang@analog.com> Signed-off-by: NSteven Miao <realmz6@gmail.com>
-
由 Scott Jiang 提交于
Signed-off-by: NScott Jiang <scott.jiang.linux@gmail.com>
-
由 Sonic Zhang 提交于
For BF537_FAMILY, when offset != 1, the mask is 1. Thus add proper mask for comparing pfunc with function. Also has small refactor for better readability. In portmux_setup(), it looks odd having "pmux &= ~(3 << 1);" while in current code we do pmux |= (function << offset);. Signed-off-by: NAxel Lin <axel.lin@ingics.com> Signed-off-by: NSonic Zhang <sonic.zhang@analog.com>
-
git://people.freedesktop.org/~airlied/linux由 Linus Torvalds 提交于
Pull drm updates from Dave Airlie: "This is a combo of -next and some -fixes that came in in the intervening time. Highlights: New drivers: ARM Armada driver for Marvell Armada 510 SOCs Intel: Broadwell initial support under a default off switch, Stereo/3D HDMI mode support Valleyview improvements Displayport improvements Haswell fixes initial mipi dsi panel support CRC support for debugging build with CONFIG_FB=n Radeon: enable DPM on a number of GPUs by default secondary GPU powerdown support enable HDMI audio by default Hawaii support Nouveau: dynamic pm code infrastructure reworked, does nothing major yet GK208 modesetting support MSI fixes, on by default again PMPEG improvements pageflipping fixes GMA500: minnowboard SDVO support VMware: misc fixes MSM: prime, plane and rendernodes support Tegra: rearchitected to put the drm driver into the drm subsystem. HDMI and gr2d support for tegra 114 SoC QXL: oops fix, and multi-head fixes DRM core: sysfs lifetime fixes client capability ioctl further cleanups to device midlayer more vblank timestamp fixes" * 'drm-next' of git://people.freedesktop.org/~airlied/linux: (789 commits) drm/nouveau: do not map evicted vram buffers in nouveau_bo_vma_add drm/nvc0-/gr: shift wrapping bug in nvc0_grctx_generate_r406800 drm/nouveau/pwr: fix missing mutex unlock in a failure path drm/nv40/therm: fix slowing down fan when pstate undefined drm/nv11-: synchronise flips to vblank, unless async flip requested drm/nvc0-: remove nasty fifo swmthd hack for flip completion method drm/nv10-: we no longer need to create nvsw object on user channels drm/nouveau: always queue flips relative to kernel channel activity drm/nouveau: there is no need to reserve/fence the new fb when flipping drm/nouveau: when bailing out of a pushbuf ioctl, do not remove previous fence drm/nouveau: allow nouveau_fence_ref() to be a noop drm/nvc8/mc: msi rearm is via the nvc0 method drm/ttm: Fix vma page_prot bit manipulation drm/vmwgfx: Fix a couple of compile / sparse warnings and errors drm/vmwgfx: Resource evict fixes drm/edid: compare actual vrefresh for all modes for quirks drm: shmob_drm: Convert to clk_prepare/unprepare drm/nouveau: fix 32-bit build drm/i915/opregion: fix build error on CONFIG_ACPI=n Revert "drm/radeon/audio: don't set speaker allocation on DCE4+" ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide由 Linus Torvalds 提交于
Pull IDE updates from David Miller: "Just some minor cleanups and simplifications" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide: ide: pmac: remove unnecessary pci_set_drvdata() ide: cs5536: use module_pci_driver() ide: pmac: Remove casting the return value which is a void pointer
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-next由 Linus Torvalds 提交于
Pull sparc update from David Miller: 1) Implement support for up to 47-bit physical addresses on sparc64. 2) Support HAVE_CONTEXT_TRACKING on sparc64, from Kirill Tkhai. 3) Fix Simba bridge window calculations, from Kjetil Oftedal. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-next: sparc64: Implement HAVE_CONTEXT_TRACKING sparc64: Add self-IPI support for smp_send_reschedule() sparc: PCI: Fix incorrect address calculation of PCI Bridge windows on Simba-bridges sparc64: Encode huge PMDs using PTE encoding. sparc64: Move to 64-bit PGDs and PMDs. sparc64: Move from 4MB to 8MB huge pages. sparc64: Make PAGE_OFFSET variable. sparc64: Fix inconsistent max-physical-address defines. sparc64: Document the shift counts used to validate linear kernel addresses. sparc64: Define PAGE_OFFSET in terms of physical address bits. sparc64: Use PAGE_OFFSET instead of a magic constant. sparc64: Clean up 64-bit mmap exclusion defines.
-
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu由 Linus Torvalds 提交于
Pull IOMMU updates from Joerg Roedel: "This time the updates contain: - Tracepoints for certain IOMMU-API functions to make their use easier to debug - A tracepoint for IOMMU page faults to make it easier to get them in user space - Updates and fixes for the new ARM SMMU driver after the first hardware showed up - Various other fixes and cleanups in other IOMMU drivers" * tag 'iommu-updates-v3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (26 commits) iommu/shmobile: Enable the driver on all ARM platforms iommu/tegra-smmu: Staticize tegra_smmu_pm_ops iommu/tegra-gart: Staticize tegra_gart_pm_ops iommu/vt-d: Use list_for_each_entry_safe() for dmar_domain->devices traversal iommu/vt-d: Use for_each_drhd_unit() instead of list_for_each_entry() iommu/vt-d: Fixed interaction of VFIO_IOMMU_MAP_DMA with IOMMU address limits iommu/arm-smmu: Clear global and context bank fault status registers iommu/arm-smmu: Print context fault information iommu/arm-smmu: Check for num_context_irqs > 0 to avoid divide by zero exception iommu/arm-smmu: Refine check for proper size of mapped region iommu/arm-smmu: Switch to subsys_initcall for driver registration iommu/arm-smmu: use relaxed accessors where possible iommu/arm-smmu: replace devm_request_and_ioremap by devm_ioremap_resource iommu: Remove stack trace from broken irq remapping warning iommu: Change iommu driver to call io_page_fault trace event iommu: Add iommu_error class event to iommu trace iommu/tegra: gart: cleanup devm_* functions usage iommu/tegra: Print phys_addr_t using %pa iommu: No need to pass '0x' when '%pa' is used iommu: Change iommu driver to call unmap trace event ...
-